Highly Luminescent and Ultrastable CsPbBr3 Perovskite Quantum Dots Incorporated into a Silica/Alumina Monolith

We successfully prepared QDs incorporated into a silica/alumina monolith (QDs‐SAM) by a simple sol–gel reaction of an Al–Si single precursor with CsPbBr₃ QDs blended in toluene solution, without adding water and catalyst. The resultant transparent monolith exhibits high photoluminescence quantum yields (PLQY) up to 90 %, and good photostability under strong illumination of blue light for 300 h. We show that the preliminary ligand exchange of didodecyl dimethyl ammonium bromide (DDAB) was very important to protect CsPbBr₃ QDs from surface damages during the sol–gel reaction, which not only allowed us to maintain the original optical properties of CsPbBr₃ QDs but also prevented the aggregation of QDs and made the monolith transparent. The CsPbBr₃ QDs‐SAM in powder form was easily mixed into the resins and applied as color‐converting layer with curing on blue light‐emitting diodes (LED). The material showed a high luminous efficacy of 80 lm W⁻¹ and a narrow emission with a full width at half maximum (FWHM) of 25 nm.     

CsPbI3钙钛矿量子点的精细纯化及其高效发光二极管的研究

钙钛矿量子点发光二极管(QLEDs)因其色纯度高、颜色控制精准、色域广以及溶液可加工等特点,在显示和照明等领域有着极大的应用前景.针对红光钙钛矿CsPbI3量子点纯化过程中相变和表面配体损失造成的荧光退化问题,本工作发展了一种甲苯和乙酸乙酯协同的混合溶剂纯化策略,能够避免纯化过程中的相变问题,获得了纯立方相的CsPbI...     

Hydrophilic alginate based multidentate biopolymers for surface modification of CdS quantum dots

We report that sodium alginate and its graft-copolymers with (2-dimethylaminoethyl) methacrylate may attach to the surface of colloidal CdS-thioglycerol quantum dots (QDs) via a ligand exchange process and result in water-soluble and highly stable QD supramolecules. Optical properties of modified QDs in water showed that the emission intensity of QDs was still high after surface passivation.     

Large‐Scale Synthesis of High‐Quality Metal Sulfide Semiconductor Quantum Dots with Tunable Surface‐Plasmon Resonance Frequencies

High‐quality CdS and Cu₇S₄ quantum dots (QDs) were synthesized with N,N‐dibutylthiourea (DBTU) as an organic sulfur source. In this method, nucleation and growth reactions were controlled simply by the heating rate of the reaction. The mild oxidation conditions gave monodisperse CdS QDs exhibiting pure band‐edge emission with relatively high photoluminescence quantum yield. During the synthesis of Cu₇S₄ QDs, the addition of dodecanethiol to the reaction system controlled the reaction rate to give monodisperse spherical or disk‐shaped QDs. A hundred‐gram scale of copper precursor could be used to generate the high‐quality Cu₇S₄ QDs, indicating that an industrial‐scale reaction is achievable with our method. As observed in anisotropic noble‐metal nanocrystals, larger disk‐shaped Cu₇S₄ QDs showed lower localized‐surface‐plasmon resonance energy in the near‐infrared region. The disk‐shaped Cu₇S₄ QDs could be used effectively as templates to form cation‐exchanged monodisperse disk‐shaped CdS QDs.     

Preparation of a Water-Soluble ZnXCd1-XS Quantum Dot Photocatalyst at Room Temperature Assisted by 3-Mercaptopropionic Acid

An effective path to synthesize Zn_xCd_1-xS quantum dots (ZCS QDs) in aqueous phase at room temperature has remained relatively unexplored. Here, we developed a room-temperature, aqueous-phase approach to ZCS QDs, using 3-mercaptopropionic acid (MPA) to adjust the pH of the reaction precursor solution to regulate the competition between sulfur source and hydroxyl group, and realize the large-scale preparation of water-soluble ZCS QDs photocatalyst at room temperature. Without recombination with other materials, and only by regulating the ratio of pH, excess sulfur sources and Zn/Cd, the photocatalytic degradation of rhodamine B (RhB) can reach 98% within 1 min, showing high photocatalytic activity. ZCS QDs show high stability and recoverability, and are expected to be able to deal with organic pollutants on a large scale. This study provides a new idea for the preparation of other QDs at room temperature.     

Chiral Semiconductor Nanoparticles for Protein Catalysis and Profiling

In this study, via a simple one‐step method, chiral copper sulfide quantum dots (d/l‐QDs) were prepared using d‐/l‐penicillamine (d‐/l‐Pen). The anisotropy factor of d/l‐QDs was as high as 0.01. The d/l‐QDs can be used as photocatalysts to cleave proteins. Notably, the l‐QDs displayed the highest catalytic performance under left‐circularly polarized light irradiation. Mechanistic investigations indicate the generation of hydroxyl radicals as the reactive species that cause the cutting of proteins.     

In situ ligand exchange of thiol-capped CuInS2/ZnS quantum dots at growth stage without affecting luminescent characteristics

An aliphatic thiol ligand of CuInS(2)/ZnS core/shell quantum dots is replaced with a hydroxyl-terminated thiol ligand by utilizing 'on-off state' of ligands during growth stage of the quantum dots. After the ligand-exchange, negligible differences were observed on both photoluminescence spectrum and luminescent quantum efficiency. The reason for the high retention of luminescent efficiency comes from no local agglomeration and no surface deterioration of QDs. It is also observed that 70% of initial ligands are exchanged by the replacing ligand, determined by FT-IR and (1)H NMR. The proposed method provides the quantum dots with an excellent dispersibility in polar solvents, supported by identical luminescence decay characteristics of the QDs.     

Continuous‐Flow Synthesis of CdSe Quantum Dots: A Size‐Tunable and Scalable Approach

In recent years, continuous‐flow/microreactor processing for the preparation of colloidal nanocrystals has received considerable attention. The intrinsic advantages of microfluidic reactors have opened new opportunities for the size‐controlled synthesis of nanocrystals either in the laboratory or on a large scale. Herein, an experimentally simple protocol for the size‐tunable continuous‐flow synthesis of rather monodisperse CdSe quantum dots (QDs) is presented. CdSe QDs are manufactured by using cadmium oleate as cadmium source, selenium dioxide as selenium precursor, and 1‐octadecene as solvent. Exploiting selenium dioxide as selenium source and 1‐octadecene as solvent allows execution of the complete process in open air without any requirement for air‐free manipulations using a glove box or Schlenk line. Continuous‐flow processing is performed with a stainless steel coil of 1.0 mm inner diameter pumping the combined precursor solution through the reactor by applying a standard HPLC pump. The effect of different reaction parameters, such as temperature, residence time, and flow rate, on the properties of the resulting CdSe QDs was investigated. A temperature increase from 240 to 260 °C or an extension of the residence time from 2 to 20 min affords larger nanocrystals (range 3–6 nm) whereas the size distribution does not change significantly. Longer reaction times and higher temperatures result in QDs with lower quantum yields (range 11–28 %). The quality of the synthesized CdSe QDs was confirmed by UV/Vis and photoluminescence spectroscopy, small‐angle X‐ray scattering, and high‐resolution transmission electron microscopy. Finally, the potential of this protocol for large‐scale manufacturing was evaluated and by operating the continuous‐flow process for 87 min it was possible to produce 167 mg of CdSe QDs (with a mean diameter of 4 nm) with a quantum yield of 28 %.     

Simple cubic self-assembly of PbS quantum dots by finely controlled ligand removal through gel permeation chromatography

The geometry in self-assembled superlattices of colloidal quantum dots (QDs) strongly affects their optoelectronic properties and is thus of critical importance for applications in optoelectronic devices. Here, we achieve the selective control of the geometry of colloidal quasi-spherical PbS QDs in highly-ordered two and three dimensional superlattices: Disordered, simple cubic (sc), and face-centered cubic (fcc). Gel permeation chromatography (GPC), not based on size-exclusion effects, is developed to quantitatively and continuously control the ligand coverage of PbS QDs. The obtained QDs can retain their high stability and photoluminescence on account of the chemically soft removal of the ligands by GPC. With increasing ligand coverage, the geometry of the self-assembled superlattices by solution-casting of the GPC-processed PbS QDs changed from disordered, sc to fcc because of the finely controlled ligand coverage and anisotropy on QD surfaces. Importantly, the highly-ordered sc supercrystal usually displays unique superfluorescence and is expected to show high charge transporting properties, but it has not yet been achieved for colloidal quasi-spherical QDs. It is firstly accessible by fine-tuning the QD ligand density using the GPC method here. This selective formation of different geometric superlattices based on GPC promises applications of such colloidal quasi-spherical QDs in high-performance optoelectronic devices.

Gel permeation chromatography can finely control ligand coverage of PbS quantum dots. Self-assembly of these QDs with different ligand density leads to the formation of 2D square, hexagonal and 3D simple cubic and face-centered cubic superlattices.     

In‐Situ Microfluidic Study of Biphasic Nanocrystal Ligand‐Exchange Reactions Using an Oscillatory Flow Reactor

Oscillatory flow reactors provide a surface energy‐driven approach for automatically screening reaction conditions and studying reaction mechanisms of biphasic nanocrystal ligand‐exchange reactions. Sulfide and cysteine ligand‐exchange reactions with as‐synthesized CdSe quantum dots (QDs) are chosen as two model reactions. Different reaction variables including the new‐ligand‐to‐QD ratio, the size of the particles, and the original ligand type are examined systematically. Based on the in situ‐obtained UV/Vis absorption spectra during the reaction, we propose two different exchange pathways for the sulfide exchange reaction.     

Multifunctional compact zwitterionic ligands for preparing robust biocompatible semiconductor quantum dots and gold nanoparticles

We describe the synthesis of a series of four different ligands which are used to prepare hydrophilic, biocompatible luminescent quantum dots (QDs) and gold nanoparticles (AuNPs). Overall, the ligands are designed to be compact while still imparting a zwitterionic character to the NPs. Ligands are synthesized appended to a bidentate dihydrolipoic acid- (DHLA) anchor group, allowing for high-affinity NP attachment, and simultaneously incorporate tertiary amines along with carboxyl and/or hydroxyl groups. These are placed in close proximity within the ligand structure and their capacity for joint ionization imparts the requisite zwitterionic nature to the nanocrystal. QDs functionalized with the four different compact ligands were subjected to extensive physical characterization including surface charge, wettability, hydrodynamic size, and tolerance to a wide pH range or high salt concentration over time. The utility of the compact ligand coated QDs was further examined by testing of direct conjugation to polyhistidine-appended protein and peptides, aqueous covalent-coupling chemistry, and the ability to engage in F?rster resonance energy transfer (FRET). Conjugating cell penetrating peptides to the compact ligand coated QD series facilitated their rapid and efficient cellular uptake, while subsequent cytotoxicity tests showed no apparent decreases in cell viability. In vivo biocompatibility was also demonstrated by microinjecting the compact ligand coated QDs into cells and monitoring their stability over time. Inherent benefits of the ligand design could be extended beyond QDs as AuNPs functionalized with the same compact ligand series showed similar colloidal properties. The strong potential of these ligands to expand NP capabilities in many biological applications is highlighted.     

A Facile Strategy to Fabricate Thermoresponsive Polymer Functionalized CdTe/ZnS Quantum Dots: Assemblies and Optical Properties

Novel thermoresponsive CdTe/ZnS quantum dots (QDs) decorated with a copolymer ligand (CPL) containing 8‐hydroxyquinoline and NIPAM units are prepared through coordinate bonding in aqueous solution. The dependence of the morphology and optical properties of the QDs/CPL assemblies formed via coordinate bonding on the experimental conditions is studied. The coordinate induced self‐assemblies are observed by controlling the molar ratio of QDs and CPL. The self‐organized structure of QDs/CPL proceeds through a first step of QDs‐chains, followed by a necklace‐like single annular chain, and subsequently increases its annular chain structure, forming a network. The CPL functionalized QDs can emit multiple colors from the cooperating interaction between the inherent emission (606 nm) of the QDs and the surface‐coordinated emission (517 nm) of the CPL complex formed on the QD surface. For QDs‐CPL systems, both Förster resonance energy transfer (FRET) and a high rate of photoinduced electron transfer (PET) are simultaneous, the latter mainly contributing to PL quenching. The thermoresponsive QDs/CPL assemblies also exhibit dual reversible PL properties between the inherent emission of QDs and surface‐coordinated emission.

     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

高灵敏CdTe量子点探针的构建及与金属离子的作用

采用变性的牛血清白蛋白(dBSA)对水相合成的CdTe量子点进行修饰, 构建了高灵敏金属离子探针, 研究了其对重金属离子的检测性能并对机理进行了探讨. 通过优化反应条件, 合成了具有高量子产率的以巯基乙酸为稳定剂的水溶性CdTe量子点, 并采用变性的牛血清白蛋白分别对不同粒径的CdTe量子点进行修饰, 确定变性的牛血清白蛋白与不同粒径量子点之间的最佳比例. 在纯化变性的牛血清白蛋白修饰的量子点(dBSA-QDs)的基础上, 研究了该量子点与不同金属离子的作用. 结果表明, 量子点经修饰后, 其量子产率、 抗光漂白性及稳定性得到显著提高; 而且dBSA-QDs的荧光可被重金属离子有效猝灭, 与巯基乙酸稳定的量子点(TGA-QDs)相比, 检测灵敏度显著提高.     

Quantitative Photoelectrochemical Detection of Biotin Conjugated CdSe/ZnS Quantum Dots on the Avidin Immobilized ITO Electrodes

Photocurrent generation from CdSe/ZnS (core/shell) quantum dots (QDs) in a photoelectrochemical cell was proposed to perform a bioaffinity biosensor in this study. The photocurrent of QDs is reversible and methylene blue as an electron transfer mediator causes a four‐fold increase in the photocurrent. We further present quantitative photoelectrochemical detection of biotin conjugated QDs on the avidin immobilized ITO electrodes. A linear calibration graph was obtained in the range of 4 and 18 nM of biotin conjugated QDs with a coefficient of determination of 0.997. Results imply that QDs can be successfully used as photoelectroactive labels for the photoelectrochemical biosensor systems.     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

New Preparation of Structurally Symmetric,Biodegradable Poly(L‐lactide) Disulfides and PLLA–Stabilized,Photoluminescent CdSe Quantum Dots

New, biodegradable poly(L ‐lactide) disulfides, PLLA‐SS‐PLLA, were first prepared through the DMAP‐catalyzed ring‐opening polymerization of L ‐lactide with a dihydroxyethyl disulfide initiator, and were further catalytically reduced into thiol‐end‐functionalized poly(L ‐lactide)s, HO‐PLLA‐SH, with a tributyl phosphine catalyst (PBu₃). Employing the HO‐PLLA‐SH as the ligand, new core‐shell CdSe/PLLA quantum dots (QDs) were continuously prepared via a facile ligand‐exchanging process with the CdSe/TOPO QD precursor. The chemical structures, morphologies and solvent solubility of these prepared CdSe/PLLA QDs were investigated by NMR spectroscopy, FTIR spectroscopy, XRD, TEM and excitation under either room light or UV radiation at 365 nm, demonstrating the successful ligand replacement and the new formation of core‐shell CdSe/PLLA QDs (diameter:4.0 ± 0.3 nm). Finally, UV and FL results indicate the two factors of the HO‐PLLA‐SH ligand molecular weight and the ligand/QD precursor feeding weight ratio were important for preparing stable and highly photoluminescent CdSe/PLLA QDs.

     

Quantifying the Thermodynamics of Ligand Binding to CsPbBr3 Quantum Dots

Cesium lead halide perovskites are an emerging class of quantum dots (QDs) that have shown promise in a variety of applications; however, their properties are highly dependent on their surface chemistry. To this point, the thermodynamics of ligand binding remain unstudied. Herein, ¹H NMR methods were used to quantify the thermodynamics of ligand exchange on CsPbBr₃ QDs. Both oleic acid and oleylamine native ligands dynamically interact with the CsPbBr₃ QD surface, having individual surface densities of 1.2–1.7 nm^?2. 10‐Undecenoic acid undergoes an exergonic exchange equilibrium with bound oleate (K_eq=1.97) at 25 °C while 10‐undecenylphosphonic acid undergoes irreversible ligand exchange. Undec‐10‐en‐1‐amine exergonically exchanges with oleylamine (K_eq=2.52) at 25 °C. Exchange occurs with carboxylic acids, phosphonic acids, and amines on CsPbBr₃ QDs without etching of the nanocrystal surface; increases in the steady‐state PL intensities correlate with more strongly bound conjugate base ligands.     

基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

Preparation of High‐Performance Water‐Soluble Quantum Dots for Biorecognition through Fluorescence Resonance Energy Transfer

An improved method for the synthesis of high‐performance and water‐soluble quantum dots (QDs) involving the encapsulation of mercaptosuccinic acid coated QDs (MSA‐QDs) with poly(diallyldimethylammonium chloride) (PDDA) followed by their direct photoactivation with fluorescent radiation near 295 K to yield PDDA‐coated QDs (PDDA‐QDs) has been demonstrated. The quantum yield (QY) of the PDDA‐QDs was significantly improved from 0.6 (QY of MSA‐QDs) to 48 %. By using this synthetic strategy, highly photoluminescent PDDA‐QDs of varied size were readily prepared. The surface properties of PDDA‐QDs and MSA‐QDs were extensively characterized. The highly luminescent and positively charged PDDA‐QDs serve as a useful and convenient tool for protein adsorption. With a Δ⁵‐3‐ketosteroid isomerase adsorbed PDDA‐QD complex, the biorecognition of steroids was demonstrated through the application of fluorescent resonance energy transfer.