An Electrochemical Cinnamyl C—H Amination Reaction Using Carbonyl Sulfamate

An electrochemical cinnamyl C—H amination reaction in the absence of transition metal catalyst and oxidant was reported. The choice of carbonyl sulfamate as nitrogen source is the key to achieve desired chemoselectivity. A series of terminal amine derivatives are prepared using this protocol and the sulfonyl group can be removed with basic hydrolysis. The reaction is suggested to proceed via a continuous anodic oxidation, deprotonation, anodic oxidation, and intermolecular nucleophilic addition pathway, demonstrating the first example of electrochemical cinnamyl C—H amination.     

Tethered aminohydroxylation using acyclic homo-allylic sulfamate esters and sulfonamides as substrates

Homo-allylic sulfamate esters and sulfonamides are shown to be useful substrates for the tethered aminohydroxylation (TA) reaction. The sulfamate esters undergo the TA reaction delivering 1,2,3-oxathiazinane products whereas the sulfonamides give 1,2-thiazinane products. A range of acyclic homo-allylic sulfamate esters were prepared and subjected to the TA reaction to establish the scope of the process. Nucleophilic ring-opening reactions of the 1,2,3-oxathiazinane products are also described.     

α-Al2O3纳米粒子对Co-Ni合金异常共沉积电化学行为的影响

为了研究在电化学复合共沉积过程中,惰性纳米粒子和金属离子、电极表面的相互作用,以及由此产生的对合金电化学共沉积行为的影响.本文从两个吸附过程出发: 电解液中的金属离子和H＋在纳米粒子表面的吸附；纳米粒子迁移到阴极表面,在电极表面的吸附.采用Zeta电势和稳态极化以及电化学交流阻抗（EIS）研究了纳米Al2O3粒子和电解液中的金属离子，和电极表面的相互作用,进而分析了纳米粒子对Co2＋和Ni2＋还原沉积的影响规律.通过对阻抗数据的拟合,讨论了Al2O3纳米粒子对等效电路中各物理参数的影响.在H＋和不同金属离子在纳米粒子上发生竞争吸附的基础上,提出了纳米粒子和合金共沉积的可能反应历程.     

Chemical changes of polymeric surfaces after modification with multi-source cluster deposition

A new process for surface modification of polymers with multi-source cluster deposition apparatus has been reported in our previous work. The apparatus simultaneously supplies reactant of ammonium sulfamate and activator of energetic Ar(+) ion. In this work chemical changes are analyzed on the basis of XPS spectra and the relations of contact angle and platelet adhesion with chemical changes are discussed. Polymer film, setting on a turning holder, was irradiated by Ar(+) ions during bombardment with ammonium sulfamate clusters. The Ar(+) ion source served for activation of polymer surface and a cluster ion source supplied ammonium sulfamate molecules to react with activated surface. After thorough washing with deionized sterile water, the modified surfaces were evaluated in terms of contact angle of water, elemental composition and binding state on XPS and platelet adhesion with platelet rich plasma (PRP). The modification of polysulfone decreased the contact angle of water on surfaces from 82.6 down to 34.5 degrees. The adhesion number of platelets were decreased to one-tenth of the original surface. Ammonium, amine, sulfate and thiophene combinations were formed on the modified surfaces. The primary studies showed successful modification of polysulfone with ammonium sulfamate by assistance of Ar(+) ion irradiation. The polar groups like N-sulfate were formed on surfaces and contribute to the decrease of surface contact angle and adhesion number of platelets. Since the same process can also be applied to other polymeric materials with various substrates, combining with the features of no solvent and no topographic changes, this method might be developed in a promising way for modification of polymers.     

The sulfamate functional group as a new anchor for solid-phase organic synthesis

[reaction: see text] Sulfamate derivatives were loaded on trityl chloride resin, and two variants of cleavage were developed for this sulfamate anchor: an acid treatment to easily restore the free sulfamate and a nucleophilic treatment to generate the corresponding phenol. In addition to loading/cleavage assays and stability experiments, a model sequence of reactions was performed with the new sulfamate anchor to show its applicability in further combinatorial solid-phase synthesis of libraries of biologically relevant sulfamate derivatives.     

Ni-Co-LaNi5复合电极材料在碱性介质中的电催化析氢性能

电催化析氢反应是电能向化学能转化的一个有效途径,是电化学科学中一个非常值得深入研究的课题。阴极析氢超电势的降低,是提高析氢活性,降低电解能耗的关键。为了提高电极的电催化活性,一是可通过提高电极表面的真实表面积,来降低电解过程中电极表面的真实电流密度,达到降低析氢超电势的目的;另一发展方向是提高电极材料本身的电化学活性,即寻找高催化活性的新型析氢材料犤1犦。由于过渡金属具有特殊的d电于结构,是目前公认的电化学活性最好的电极材料,而在过渡金属中,Ni及Ni合金将是研究的主要方向,其中多元合金复合材料将成为该技术发展…     

Isothermal pyrolysis of cellulose untreated and treated with some flame-retardants

Linter cellulose, untreated and treated with boric acid, ammonium sulfamate, and guanidine sulfamate, was heated iosthermally in an imaging furnace thermal balance under a flow of helium gas to obtain kinetic parameters of the weight loss and changes in the elemental content and infrared (IR) spectra during pyrolysis. The weight, carbon, hydrogen, and oxygen losses of the untreated cellulose obey a zeroth-order reaction at an early stage and a first-order reaction at a later stage. The Arrhenius parameters for the weight and elemental losses are in agreement for both reactions. The activation energy and preexponential factor of the first-order weight loss are 185 kJ/mol and 2.0 × 10¹³ s^?1, respectively. The carbon, hydrogen, and oxygen losses of the samples treated with boric acid and guanidine sulfamate also obey a first-order reaction at a later stage of pyrolysis. The results of the elemental and IR spectral analyses suggest that the zeroth- and first-order reactions are caused mainly by the production of levoglucosan and that an initial rapid step, especially for the treated samples, is contributed by dehydration.     

Synthesis of Sulfamate‐Fused 2‐Aminopyrroles via an Isocyanide‐Based Three Component [1+2+2] Annulation

An efficient preparation of sulfamate‐fused 2‐aminopyrroles was achieved through an isocyanide‐based three‐component [1+2+2] annulation of isocyanides, dialkyl acetylenedicarboxylates, and sulfamate‐derived cyclic imines in good to excellent yields (up to 99 %). This reaction proceeds smoothly without any activation or modification of substances under neutral and metal‐free conditions. The reaction could also be conveniently performed on a gram scale.     

Total Synthesis and Biological Evaluation of Siladenoserinol A and its Analogues

The total synthesis of siladenoserinol A, an inhibitor of the p53–Hdm2 interaction, has been achieved. AuCl₃‐catalyzed hydroalkoxylation of an alkynoate derivative smoothly and regioselectively proceeded to afford a bicycloketal in excellent yield. A glycerophosphocholine moiety was successfully introduced through the Horner–Wadsworth–Emmons reaction using an originally developed phosphonoacetate derivative. Finally, removal of the acid‐labile protecting groups, followed by regioselective sulfamate formation of the serinol moiety afforded the desired siladenoserinol A, and benzoyl and desulfamated analogues were also successfully synthesized. Biological evaluation showed that the sulfamate is essential for biological activity, and modification of the acyl group on the bicycloketal can improve the inhibitory activity against the p53–Hdm2 interaction.     

O-(Aminosulfonylation) of phenols and an example of slow hydrolytic release

Sequential replacement of imidazole from sulfonyldiimidazole by phenols and then amines leads to O-arylsulfamate esters. Application of this coupling method to 19 phenols and 6 amines generates a library of 114 sulfamate esters, Ar-OSO₂-NR₂. A sulfamate based conjugate of ethinyl estradiol was prepared by using the steroid 3-hydroxyl as the phenol component, and an amino amide derived from linoleic acid as the amine. Hydrolysis of this conjugate was studied in aqueous buffer at pH values 2, 5, and 7.4, and (essentially identical) respective half-lives of 6.8, 6.6, and 6.7 days were observed.     

Unusual sulfamate indoles and a novel indolo[3,2-a]carbazole from Ancorina sp

Four new indoles, ancorinolates A-C and bis-ancorinolate B, which contain sulfamate and sulfate groups, were isolated from the aqueous extract of the sponge Ancorina sp. In addition, ancorinazole, an indolo[3,2-a]carbazole also possessing sulfamate and sulfate groups, was isolated from two separate New Zealand collections of Ancorina sp. Ancorinazole is the first indolo[3,2-a]carbazole described as a natural product. Ancorinolates A (1) and C (3) showed weak HIV-inhibitory activity in the XTT-based, anticytopathicity assay.     

Substrate‐Induced Dimerization Assembly of Chiral Macrocycle Catalysts toward Cooperative Asymmetric Catalysis

An artificial system of substrate‐induced dimerization assembly of chiral macrocycle catalysts enables a highly cooperative hydrogen‐bonding activation network for efficient enantioselective transformation. These macrocycles contain two thiourea and two chiral diamine moieties and dimerize with sulfate to form a sandwich‐like assembly. The macrocycles then adopt an extended conformation and reciprocally complement the hydrogen‐bonding interaction sites. Inspired by the guest‐induced dynamic assembly, these macrocycles catalyze the decarboxylative Mannich reaction of cyclic aldimines containing a sulfamate heading group. The imine substrate can be activated toward nucleophilic attack of β‐ketoacid by a cooperative hydrogen‐bonding network enabled by sulfamate‐induced dimerization assembly of the macrocycle catalysts. Highly efficient (>95 % yield in most cases) and enantioselective (up to 97.5:2.5 er) transformation of a variety of substrates using only 5 mol % macrocycle was achieved.     

Ground state structures of sulfate monoesters and sulfamates reveal similar reaction coordinates for sulfuryl and sulfamyl transfer

Structure/reactivity and structure/structure correlations of 5 sulfate monoesters and 11 sulfamate esters determined by low temperature X-ray crystallography reveal similar ground state deformations that suggest similar reaction coordinates for sulfuryl and sulfamyl group transfer.     

Aziridines from intramolecular alkene aziridination of sulfamates: reactivity toward carbon nucleophiles. application to the synthesis of spisulosine and its fluoro analogue

Catalytic intramolecular alkene aziridination of sulfamate is an emerging methodology for the asymmetric synthesis of chiral functionalized amines involving the formation of bicyclic aziridines. This study demonstrates the ability of the latter to undergo ring-opening with various carbon nucleophiles: Grignard reagents, lithium salts of terminal alkynes, dithiane, malonate. These S(N)2-type reactions occur with high levels of regio- and chemoselectivity to generally afford seven-membered cyclic sulfamidates in good yields. Carbon nucleophiles have also been found to react with these sulfamidates provided that the sulfamate ester has been previously activated by introduction of a tosyl substituent on the NH group. The versatility of this strategy has been illustrated with the syntheses of spisulosine and its fluoro analogue.     

A study of the complex composition of sulfamate ruthenium-plating electrolytes

Varying-with-time complex composition of a sulfamate ruthenium-plating electrolyte was studied. Recommendations are given concerning the working modes and adjustment conditions in prolonged operation of the electrolyte.     

Solid-phase synthesis of sulfamate peptidomimetics

A synthetic method for the preparation of sulfamate peptidomimetics is described. The methodology allows sulfamoylation in the solid phase using sulfamoyl chloride in DMA, followed by the acylation of the corresponding sulfamoylated product. Following this approach, several derivatives have been prepared starting from distinct alcohol sources, including alpha-, beta-, and gamma-hydroxyacids and phenols. The presence of protected amino functions on the building blocks opens the possibility of the addition of more diversity. This approach, which is compatible with Fmoc/Boc/Alloc protection, provides a useful and efficient tool for the preparation of new sulfamate peptidomimetics.     

Sulfamate Esters Guide Selective Radical‐Mediated Chlorination of Aliphatic C−H Bonds

Masked alcohols are particularly appealing as directing groups because of the ubiquity of hydroxy groups in organic small molecules. Herein, we disclose a general strategy for aliphatic γ‐C(sp³)?H functionalization guided by a masked alcohol. Specifically, we determine that sulfamate ester derived nitrogen‐centered radicals mediate 1,6‐hydrogen‐atom transfer (HAT) processes to guide γ‐C(sp³)?H chlorination. This reaction proceeds through a light‐initiated radical chain‐propagation process and is capable of installing chlorine atoms at primary, secondary, and tertiary centers.     

Regulating Perovskite Crystallization through Interfacial Engineering Using a Zwitterionic Additive Potassium Sulfamate for Efficient Pure-Blue Light-Emitting Diodes

Quasi-two-dimensional (quasi-2D) perovskites are emerging as efficient emitters in blue perovskite light-emitting diodes (PeLEDs), while the imbalanced crystallization of the halide-mixed system limits further improvements in device performance. The rapid crystallization caused by Cl doping produces massive defects at the interface, leading to aggravated non-radiative recombination. Meanwhile, unmanageable perovskite crystallization is prone to facilitate the formation of nonuniform low-dimensional phases, which results in energy loss during the exciton transfer process. Here, we propose a multifunctional interface engineering for nucleation and phase regulation by incorporating the zwitterionic additive potassium sulfamate into the hole transport layer. By using potassium ions (K⁺) as heterogeneous nucleation seeds, finely controlled growth of interfacial K⁺-guided grains is achieved. The sulfamate ions can simultaneously regulate the phase distribution and passivate defects through coordination interactions with undercoordinated lead atoms. Consequently, such synergistic effect constructs quasi-2D blue perovskite films with smooth energy landscape and reduced trap states, leading to pure-blue PeLEDs with a maximum external quantum efficiency (EQE) of 17.32 %, spectrally stable emission at 478 nm and the prolonged operational lifetime. This work provides a unique guide to comprehensively regulate the halide-mixed blue perovskite crystallization by manipulating the characteristics of grain-growth substrate.     

Proton-in-flight mechanism for the spontaneous hydrolysis of N-methyl O-phenyl sulfamate: implications for the design of steroid sulfatase inhibitors

The hydrolysis of N-methyl O-phenyl sulfamate (1) has been studied as a model for steroid sulfatase inhibitors such as Coumate, 667 Coumate, and EMATE. At neutral pH, simulating physiological conditions, hydrolysis of 1 involves an intramolecular proton transfer from nitrogen to the bridging oxygen atom of the leaving group. Remarkably, this proton transfer is estimated to accelerate the decomposition of 1 by a factor of 10(11). Examination of existing kinetic data reveals that the sulfatase PaAstA catalyzes the hydrolysis of sulfamate esters with catalytic rate accelerations of ~10(4), whereas the catalytic rate acceleration generated by the enzyme for its cognate substrate is on the order of ~10(15). Rate constants for hydrolysis of a wide range of sulfuryl esters, ArOSO(2)X(-), are shown to be correlated by a two-parameter equation based on pK(a)(ArOH) and pK(a)(ArOSO2XH).     

Layer-by-layer assembly of silicotungstate multilayer films modified on glassy carbon electrode and their electrochemical behaviors

A new electrode was modified by multilayer films composed of heteropolyanion (SiW12) and cationic polymer poly(diallyldimethylammonium chloride) through electrochemical growth. The modified electrode electrochemical behavior, the effect of solution pH and electrocatalytic response to the reduction of BrO3- and NO2- have been investigated. The result shows that the electrochemical process of multilayer films modified electrode including SiW12 is a reversible process by electrochemical step. One-electron process has no proton participation in the first step, and one-electron process is accompanied by one proton participation in the second step and two-electron process is accompanied by two protons participation in the third step. The films grow uniformly, and the peak currents increase with increasing layer numbers. The peak currents increase with scan rate, and the reduced potentials of multilayer films shift negatively with increasing pH. The electrochemical mechanism of multilayer films was suggested.