The Effect of β‐Hydrogen Atoms on Iron Speciation in Cross‐Couplings with Simple Iron Salts and Alkyl Grignard Reagents

The effects of β‐hydrogen‐containing alkyl Grignard reagents in simple ferric salt cross‐couplings have been elucidated. The reaction of FeCl₃ with EtMgBr in THF leads to the formation of the cluster species [Fe₈Et₁₂]^2?, a rare example of a structurally characterized metal complex with bridging ethyl ligands. Analogous reactions in the presence of NMP, a key additive for effective cross‐coupling with simple ferric salts and β‐hydrogen‐containing alkyl nucleophiles, result in the formation of [FeEt₃]^?. Reactivity studies demonstrate the effectiveness of [FeEt₃]^? in rapidly and selectively forming the cross‐coupled product upon reaction with electrophiles. The identification of iron‐ate species with EtMgBr analogous to those previously observed with MeMgBr is a critical insight, indicating that analogous iron species can be operative in catalysis for these two classes of alkyl nucleophiles.     

Ate Complexes in Iron‐Catalyzed Cross‐Coupling Reactions

Iron‐catalyzed cross‐coupling reactions have an outstanding potential for sustainable organic synthesis, but remain poorly understood mechanistically. Here, we use electrospray‐ionization (ESI) mass spectrometry to identify the ionic species formed in these reactions and characterize their reactivity. Transmetalation of Fe(acac)₃ (acac=acetylacetonato) with PhMgCl in THF (tetrahydrofuran) produces anionic iron ate complexes, whose nuclearity (1 to 4 Fe centers) and oxidation states (ranging from ?I to +III) crucially depend on the presence of additives or ligands. Upon addition of iPrCl, formation of the heteroleptic Fe^III complex [Ph₃Fe(iPr)]^? is observed. Gas‐phase fragmentation of this complex results in reductive elimination and release of the cross‐coupling product with high selectivity.     

Base‐Free Non‐Noble‐Metal‐Catalyzed Hydrogen Generation from Formic Acid: Scope and Mechanistic Insights

The iron‐catalyzed dehydrogenation of formic acid has been studied both experimentally and mechanistically. The most active catalysts were generated in situ from cationic Fe^II/Fe^III precursors and tris[2‐(diphenylphosphino)ethyl]phosphine ( 1 , PP₃). In contrast to most known noble‐metal catalysts used for this transformation, no additional base was necessary. The activity of the iron catalyst depended highly on the solvent used, the presence of halide ions, the water content, and the ligand‐to‐metal ratio. The optimal catalytic performance was achieved by using [FeH(PP₃)]BF₄/PP₃ in propylene carbonate in the presence of traces of water. With the exception of fluoride, the presence of halide ions in solution inhibited the catalytic activity. IR, Raman, UV/Vis, and EXAFS/XANES analyses gave detailed insights into the mechanism of hydrogen generation from formic acid at low temperature, supported by DFT calculations. In situ transmission FTIR measurements revealed the formation of an active iron formate species by the band observed at 1543 cm^?1, which could be correlated with the evolution of gas. This active species was deactivated in the presence of chloride ions due to the formation of a chloro species (UV/Vis, Raman, IR, and XAS). In addition, XAS measurements demonstrated the importance of the solvent for the coordination of the PP₃ ligand.     

High‐Frequency Fe–H Vibrations in a Bridging Hydride Complex Characterized by NRVS and DFT

High‐spin iron species with bridging hydrides have been detected in species trapped during nitrogenase catalysis, but there are few general methods of evaluating Fe?H bonds in high‐spin multinuclear iron systems. An ⁵⁷Fe nuclear resonance vibrational spectroscopy (NRVS) study on an Fe(μ‐H)₂Fe model complex reveals Fe?H stretching vibrations for bridging hydrides at frequencies greater than 1200 cm^?1. These isotope‐sensitive vibrational bands are not evident in infrared (IR) spectra, showing the power of NRVS for identifying hydrides in this high‐spin iron system. Complementary density functional theory (DFT) calculations elucidate the normal modes of the rhomboidal iron hydride core.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Regioselective Hydration of Alkynes by Iron(III) Lewis/Brønsted Catalysis

The triflimide iron(III) salt [Fe(NTf₂)₃] promotes the direct hydration of terminal and internal alkynes with very good Markovnikov regioselectivities and high yields. The enhanced carbophilic Lewis acidity of the Fe^III cation mediated by the weakly‐coordinating triflimide anion is crucial for the catalytic activity. The iron(III) metal salt can be recycled in the form of the OPPh₃/[Fe(NTf₂)₃] system with similar activity and selectivity. However, spectroscopic and kinetic studies show that [Fe(NTf₂)₃] hydrolyzes under the reaction conditions and that catalytically less active Brønsted species are formed, which points to a Lewis/Brønsted co‐catalysis. This triflimide‐based catalytic system is regioselective for the hydration of internal aryl‐alkynes and opens the door to a new synthetic route to alkyl ketophenones. As a proof of concept, the synthesis of two antipsychotics Haloperidol and Melperone, with general butyrophenone‐like structure, is shown.     

Cyanation of Aryl Bromides with K4[Fe(CN)6] Catalyzed by Dichloro[bis{1‐(dicyclohexylphosphanyl)piperidine}]palladium,a Molecular Source of Nanoparticles,and the Reactions Involved in the Catalyst‐Deactivation Processes

Dichloro[bis{1‐(dicyclohexylphosphanyl)piperidine}]palladium [(P{(NC₅H₁₀)(C₆H₁₁)₂})₂PdCl₂] ( 1 ) is a highly active and generally applicable C? C cross‐coupling catalyst. Apart from its high catalytic activity in Suzuki, Heck, and Negishi reactions, compound 1 also efficiently converted various electronically activated, nonactivated, and deactivated aryl bromides, which may contain fluoride atoms, trifluoromethane groups, nitriles, acetals, ketones, aldehydes, ethers, esters, amides, as well as heterocyclic aryl bromides, such as pyridines and their derivatives, or thiophenes into their respective aromatic nitriles with K₄[Fe(CN)₆] as a cyanating agent within 24 h in NMP at 140 °C in the presence of only 0.05 mol % catalyst. Catalyst‐deactivation processes showed that excess cyanide efficiently affected the molecular mechanisms as well as inhibited the catalysis when nanoparticles were involved, owing to the formation of inactive cyanide complexes, such as [Pd(CN)₄]^2?, [(CN)₃Pd(H)]^2?, and [(CN)₃Pd(Ar)]^2?. Thus, the choice of cyanating agent is crucial for the success of the reaction because there is a sharp balance between the rate of cyanide production, efficient product formation, and catalyst poisoning. For example, whereas no product formation was obtained when cyanation reactions were examined with Zn(CN)₂ as the cyanating agent, aromatic nitriles were smoothly formed when hexacyanoferrate(II) was used instead. The reason for this striking difference in reactivity was due to the higher stability of hexacyanoferrate(II), which led to a lower rate of cyanide production, and hence, prevented catalyst‐deactivation processes. This pathway was confirmed by the colorimetric detection of cyanides: whereas the conversion of β‐solvato‐α‐cyanocobyrinic acid heptamethyl ester into dicyanocobyrinic acid heptamethyl ester indicated that the cyanide production of Zn(CN)₂ proceeded at 25 °C in NMP, reaction temperatures of >100 °C were required for cyanide production with K₄[Fe(CN)₆]. Mechanistic investigations demonstrate that palladium nanoparticles were the catalytically active form of compound 1 .     

Immunosensors Based on Layer‐by‐Layer Self‐Assembled Au Colloidal Electrode for the Electrochemical Detection of Antigen

Colloidal Au particles have been deposited on the gold electrode through layer‐by‐layer self‐assembly using cysteamine as cross‐linkers. Self‐assembly of colloidal Au on the gold electrode resulted in an easier attachment of antibody, larger electrode surface and ideal electrode behavior. The redox reactions of [Fe(CN)₆]^4?/[Fe(CN)₆]^3? on the gold surface were blocked due to antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.0 with various concentrations of antigen at 37 °C for 30 min. Further, an amplification strategy to use biotin conjugated antibody was introduced for improving the sensitivity of impedance measurements. Thus, the sensor based on this immobilization method exhibits a large linear dynamic range, from 5–400 μg/L for detection of Human IgG. The detection limit is about 0.5 μg/L.     

TMEDA in Iron‐Catalyzed Hydromagnesiation: Formation of Iron(II)‐Alkyl Species for Controlled Reduction to Alkene‐Stabilized Iron(0)

N,N,N′,N′‐Tetramethylethylenediamine (TMEDA) has been one of the most prevalent and successful additives used in iron catalysis, finding application in reactions as diverse as cross‐coupling, C?H activation, and borylation. However, the role that TMEDA plays in these reactions remains largely undefined. Herein, studying the iron‐catalyzed hydromagnesiation of styrene derivatives using TMEDA has provided molecular‐level insight into the role of TMEDA in achieving effective catalysis. The key is the initial formation of TMEDA–iron(II)–alkyl species which undergo a controlled reduction to selectively form catalytically active styrene‐stabilized iron(0)–alkyl complexes. While TMEDA is not bound to the catalytically active species, these active iron(0) complexes cannot be accessed in the absence of TMEDA. This mode of action, allowing for controlled reduction and access to iron(0) species, represents a new paradigm for the role of this important reaction additive in iron catalysis.     

High‐Field Pulsed EPR Spectroscopy for the Speciation of the Reduced [PV2Mo10O40]6− Polyoxometalate Catalyst Used in Electron‐Transfer Oxidations

An in‐depth spectroscopic EPR investigation of a key intermediate, formally notated as [PV^IVV^VMo₁₀O₄₀]^6? and formed in known electron‐transfer and electron‐transfer/oxygen‐transfer reactions catalyzed by H₅PV₂Mo₁₀O₄₀, has been carried out. Pulsed EPR spectroscopy have been utilized: specifically, W‐band electron–electron double resonance (ELDOR)‐detected NMR and two‐dimensional (2D) hyperfine sub‐level correlation (HYSCORE) measurements, which resolved ⁹⁵Mo and ¹⁷O hyperfine interactions, and electron–nuclear double resonance (ENDOR), which gave the weak ⁵¹V and ³¹P interactions. In this way, two paramagnetic species related to [PV^IVV^VMo₁₀O₄₀]^6? were identified. The first species (30–35 %) has a vanadyl (VO²⁺)‐like EPR spectrum and is not situated within the polyoxometalate cluster. Here the VO²⁺ was suggested to be supported on the Keggin cluster and can be represented as an ion pair, [PV^VMo₁₀O₃₉]^8?[V^IVO²⁺]. This species originates from the parent H₅PV₂Mo₁₀O₄₀ in which the vanadium atoms are nearest neighbors and it is suggested that this isomer is more likely to be reactive in electron‐transfer/oxygen‐transfer reaction oxidation reactions. In the second (70–65 %) species, the V^IV remains embedded within the polyoxometalate framework and originates from reduction of distal H₅PV₂Mo₁₀O₄₀ isomers to yield an intact cluster, [PV^IVV^VMo₁₀O₄₀]^6?.     

Metamagnetism and Single‐Chain Magnetic Behavior in a Homospin One‐Dimensional Iron(II) Coordination Polymer

Reaction of FeCl₂?4 H₂O with KNCSe and pyridine in ethanol leads to the formation of the discrete complex [Fe(NCSe)₂(pyridine)₄] ( 1 ) in which the Fe^II cations are coordinated by two N‐terminal‐bonded selenocyanato anions and four pyridine co‐ligands. Thermal treatment of compound 1 enforces the removal of half of the co‐ligands leading to the formation of a ligand‐deficient (lacking on neutral co‐ligands) intermediate of composition [Fe(NCSe)₂(pyridine)₂]_n ( 2 ) to which we have found no access in the liquid phase. Compound 2 is obtained only as a microcrystalline powder, but it is isotypic to [Cd(NCSe)₂(pyridine)₂]_n and therefore, its structure was determined by Rietveld refinement. In its crystal structure the metal cations are coordinated by two pyridine ligands and four selenocyanato anions and are linked into chains by μ‐1,3 bridging anionic ligands. Magnetic measurements on compound 1 show only paramagnetic behavior, whereas for compound 2 an unexpected magnetic behavior is found, which to the best of our knowledge was never observed before for a iron(II) homospin compound. In this compound metamagnetism and single‐chain magnetic behavior coexist. The metamagnetic transition between the antiferromagnetically ordered phase and a field‐induced ferromagnetic phase of the high‐spin iron(II) spin carriers is observed at a transition field H_C of 1300 Oe and the single‐chain magnetic behavior is characterized by a blocking temperature T_B, estimated to be about 5 K.     

The Electronic Ground State of [Fe(CO)3(NO)]−: A Spectroscopic and Theoretical Study

During the past 10 years iron‐catalyzed reactions have become established in the field of organic synthesis. For example, the complex anion [Fe(CO)₃(NO)]^?, which was originally described by Hogsed and Hieber, shows catalytic activity in various organic reactions. This anion is commonly regarded as being isoelectronic with [Fe(CO)₄]^2?, which, however, shows poor catalytic activity. The spectroscopic and quantum chemical investigations presented herein reveal that the complex ferrate [Fe(CO)₃(NO)]^? cannot be regarded as a Fe^?II species, but rather is predominantly a Fe⁰ species, in which the metal is covalently bonded to NO^? by two π‐bonds. A metal–N σ‐bond is not observed.     

TMEDA in Iron‐Catalyzed Kumada Coupling: Amine Adduct versus Homoleptic “ate” Complex Formation

The reactions of iron chlorides with mesityl Grignard reagents and tetramethylethylenediamine (TMEDA) under catalytically relevant conditions tend to yield the homoleptic “ate” complex [Fe(mes)₃]^? (mes=mesityl) rather than adducts of the diamine, and it is this ate complex that accounts for the catalytic activity. Both [Fe(mes)₃]^? and the related complex [Fe(Bn)₃]^? (Bn=benzyl) react faster with representative electrophiles than the equivalent neutral [FeR₂(TMEDA)] complexes. Fe^I species are observed under catalytically relevant conditions with both benzyl and smaller aryl Grignard reagents. The X‐ray structures of [Fe(Bn)₃]^? and [Fe(Bn)₄]^? were determined; [Fe(Bn)₄]^? is the first homoleptic σ‐hydrocarbyl Fe^III complex that has been structurally characterized.     

The Coordination Chemistry of Iron with the 1,4‐Bis(2‐pyridyl‐methyl)piperazine Ligand

The behaviour of Fe^II and Fe^III ions in combination with the potential ligand 1,4‐bis(2‐pyridyl‐methyl)piperazine (BPMP) under anhydrous conditions has been investigated. BPMP has been reacted with FeCl₂, FeCl₃ and [Fe(OTf)₂(MeCN)₂]. This led to the isolation of four new complexes, which were fully characterized and structurally investigated by single crystal X‐ray diffraction. It turned out that in the presence of chloride co‐ligands Fe^III favours the tetradentate coordination mode of BPMP with the piperazine unit in a boat configuration, like for instance in [BPMP(Cl)Fe(μ‐O)FeCl₃] or [BPMP‐FeCl₂][FeCl₄], ( 1 ). However, the employment of FeCl₂ leads to the formation of a coordination polymer [BPMP‐FeCl₂]_n, ( 2 ), containing the piperazine ring in a chair configuration binding to two iron centres each. 2 can only be dissolved in very polar solvents like dmf which is capable of breaking up the polymeric structure under formation of [Cl₂(dmf)Fe(μ‐BPMP‐1κ²N,N:2κ²N,N))Fe(dmf)Cl₂]·2 dmf, ( 3 ). In contrast, using [Fe(OTf)₂(MeCN)₂] instead of FeCl₂ as the starting material leads to a mononuclear Fe^II complex with BPMP bound in the desirable tetradentate fashion: [BPMP‐Fe(OTf)₂], ( 4 ). Unlike other complexes with tetradentate N/py ligands the two residual ligands in 4 are bound almost trans to each other with the potential to adopt a cis orientation under oxidising conditions, and it will be interesting to exploit its catalytic properties in future.     

Iron promotion of V‐HMS mesoporous catalysts for ultra‐deep oxidative desulfurization

Bimetallic Fe‐V‐HMS (HMS, hexagonal mesoporous silica) catalysts with various molar ratios of iron to vanadium were synthesized using a co‐synthesis method, and investigated for oxidative desulfurization of dibenzothiophene (DBT) using tert‐butyl hydroperoxide as an oxidant. The catalysts were characterized using X‐ray diffraction, temperature‐programmed desorption of ammonia, Fourier transform infrared spectroscopy and N₂ physical adsorption–desorption techniques. The Fe‐V‐HMS catalyst with a 2:1 molar ratio of iron to vanadium exhibited the highest total acidity and the highest catalytic activity. DBT was almost completely oxidized to dibenzothiophenesulfone, a species with a higher polarity that could be subsequently adsorbed on the Fe‐V‐HMS, and therefore the Fe‐V‐HMS acts as both a catalyst and an adsorbent simultaneously. The desulfurization rate was 98.1%. A pseudo‐first‐order model was fitted to the experimental data, and the activation energy was found to be 38.79 kJ mol^?1. The encouraging performance of Fe‐V‐HMS offers the prospect of the design of a one‐pot oxidative desulfurization process without needing extraction of sulfones from fuel oil with a chemical solvent.     

Protonation and Proton‐Coupled Electron Transfer at S‐Ligated [4Fe‐4S] Clusters

Biological [Fe‐S] clusters are increasingly recognized to undergo proton‐coupled electron transfer (PCET), but the site of protonation, mechanism, and role for PCET remains largely unknown. Here we explore this reactivity with synthetic model clusters. Protonation of the arylthiolate‐ligated [4Fe‐4S] cluster [Fe₄S₄(SAr)₄]^2? ( 1 , SAr=S‐2,4‐6‐(iPr)₃C₆H₂) leads to thiol dissociation, reversibly forming [Fe₄S₄(SAr)₃L]^1? ( 2 ) and ArSH (L=solvent, and/or conjugate base). Solutions of 2 +ArSH react with the nitroxyl radical TEMPO to give [Fe₄S₄(SAr)₄]^1? ( 1_ox ) and TEMPOH. This reaction involves PCET coupled to thiolate association and may proceed via the unobserved protonated cluster [Fe₄S₄(SAr)₃(HSAr)]^1? ( 1‐H ). Similar reactions with this and related clusters proceed comparably. An understanding of the PCET thermochemistry of this cluster system has been developed, encompassing three different redox levels and two protonation states.     

D‐Glucosamine in iron‐catalysed cross‐coupling reactions of Grignards with allylic and vinylic bromides: application to the synthesis of a key sitagliptin precursor

A sustainable D ‐glucosamine ligand is successfully introduced into iron‐catalysed C ? C cross‐coupling reactions for the first time. The Fe(acac)₂/D ‐glucosamine·HCl/Et₃N catalytic system was effective at 5 mol% loading in coupling reactions of Grignard reagents with organic bromides. Moderate to high efficiency was achieved with preserved stereochemistry when allyl (Csp³) or alkenyl (Csp²) bromides were coupled with phenylmagnesium (Csp²) or benzylmagnesium (Csp³) bromides. The catalytic system developed was also successfully applied for the novel and economic preparation of a Michael‐acceptor‐like starting material used in an alternative synthesis of the drug sitagliptin, a known blockbuster for the treatment of type II diabetes mellitus. Copyright © 2015 John Wiley & Sons, Ltd.     

Solvent‐Free Ball‐Milling Subcomponent Synthesis of Metallosupramolecular Complexes

Subcomponent self‐assembly from components A , B , C , D , and Fe²⁺ under solvent‐free conditions by self‐sorting leads to the construction of three structurally different metallosupramolecular iron(II) complexes. Under carefully selected ball‐milling conditions, tetranuclear [Fe₄( AD ₂)₆]^4? 22‐component cage 1 , dinuclear [Fe₂( BD ₂)₃]^2? 11‐component helicate 2 , and 5‐component mononuclear [Fe( CD ₃)]²⁺ complex 3 were prepared simultaneously in a one‐pot reaction from 38 components. Through subcomponent substitution reaction by adding subcomponent B , the [Fe₄( AD ₂)₆]^4? cage converts quantitatively to the [Fe₂( BD ₂)₃]^2? helicate, which, in turn, upon addition of subcomponent C , transforms to [Fe( CD ₃)]²⁺, following the hierarchical preference based on the thermodynamic stability of the complexes.     

Electrochemical and Spectroscopic Behaviour of Bis(2‐mercaptopyridine‐N‐oxide)oxovanadium(IV)

The complex [VO(MPO)₂] (MPO = deprotonated 2‐mercaptopyridine N‐oxide) was synthesized and characterized by IR spectroscopy. Its electrochemical behaviour was investigated by cyclic voltammetry in different organic solvents. The V^IV/V^V and V^IV/V^III couples could be identified. The nature of the electroactive species is strongly dependent on the solvent. The results are discussed in terms of a reaction mechanism describing the characteristics of the electron transfer processes and the involved chemical reactions, and the stability of the complex in each solvent was also determined. The electronic spectra of the investigated solutions gave additional support to the proposed mechanisms.     

Understanding High‐Rate K+‐Solvent Co‐Intercalation in Natural Graphite for Potassium‐Ion Batteries

Graphite shows great potential as an anode material for rechargeable metal‐ion batteries because of its high abundance and low cost. However, the electrochemical performance of graphite anode materials for rechargeable potassium‐ion batteries needs to be further improved. Reported herein is a natural graphite with superior rate performance and cycling stability obtained through a unique K⁺‐solvent co‐intercalation mechanism in a 1 m KCF₃SO₃ diethylene glycol dimethyl ether electrolyte. The co‐intercalation mechanism was demonstrated by ex situ Fourier transform infrared spectroscopy and in situ X‐ray diffraction. Moreover, the structure of the [K‐solvent]⁺ complexes intercalated with the graphite and the conditions for reversible K⁺‐solvent co‐intercalation into graphite are proposed based on the experimental results and first‐principles calculations. This work provides important insights into the design of natural graphite for high‐performance rechargeable potassium‐ion batteries.