Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

Micro Solid‐Contact Ion‐Selective Electrode Using a Carbon Nanotube Tower as Ion‐to‐Electron Transducer and Conductive Substrate

Solid contact (SC) ion‐selective electrodes (ISEs) have been recognized as the next generation of ISEs. In this work, the electrical conductivity and mechanical strength of a carbon nanotube (CNT) tower enable it to play the dual roles of transducer and substrate for micro SC‐ISEs. The electrode had a close to Nernstian slope of 35 mV/decade a_Ca2+, a linear range of four orders of magnitude of calcium ion activity (10^?5.6 to 10^?1.8 M), and a detection limit of 1.6×10^?6 M. The simplified fabrication by a one‐step drop casting makes miniaturizing SC‐ISEs and fabricating sensor arrays easier to achieve.     

Reversible Self‐Assembly of Carboxylated Peptide‐Functionalized Gold Nanoparticles Driven by Metal‐Ion Coordination

Carboxylated peptide‐functionalized gold nanoparticles (peptide‐GNPs) self‐assemble into two‐ and three‐dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb²⁺, Cd²⁺, Cu²⁺, and Zn²⁺) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher‐wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two‐ and three‐dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide‐GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy‐metal ions in solution.     

Investigation of Protein Binding With All Solid‐State Ion‐Selective Electrodes

A potentiometric sensor for studying charge based adsorption of proteins was created using a single‐piece polyaniline‐PVC ion‐selective electrode (ISE). Three different ISEs, two for Na⁺ and one for Cl^? ion determination, were studied. The Na⁺‐ISEs consisted of a neutral calixarene‐based ionophore and one with a charged carrier dinonylnapthalenesulfonic acid (DNNSA) whereas for the Cl^? ISE, an anion exchanger tridodecylmethylammonium chloride (TDDMA⁺Cl^?), was used. The Na⁺ ISE with DNNSA as the charged carrier was successfully able to discriminate the binding of two different proteins (bovine serum albumin and lysozyme) based on their intrinsic charge.     

Molecular Design of Calixarene,Part 4, Synthesis of Novel Double‐Armed p‐(tert‐Butyl)calix[4]arene‐Derived Amides and Their Lead(II)(Pb2+)‐Selective‐Electrode Properties

A series of novel double‐armed p‐(tert‐butyl)calix[4]arenes, carrying benzoylamido, 4‐nitrobenzoylamido, isonicotinamido, α‐naphthamido, acetamido, propionamido, or butyramido groups (see 2 – 8 , resp.) were synthesized in 80 – 86% yield by the reaction of the lower‐rim 1,3‐bis(aminoethoxy)‐substituted calix[4]arenediol 1 with the corresponding acylating agents. Their structures were established by elemental analysis, mass, IR, UV, and ¹H‐NMR spectroscopy. Ion‐selective electrodes (ISEs) for Pb²⁺, carrying 2 – 8 in a PVC membrane as neutral ionophore, were prepared, and their selectivity coefficients for Pb²⁺ (K) were determined against other heavy‐metal ions, alkali and alkaline earth metal ions, and ammonium ions by means of the separate‐solution method. The results obtained indicated that the electrodes based on the calix[4]arene‐derived amides 2 – 8 as the neutral ionophores were all Pb²⁺ selective and exhibited almost theoretical Nernstian slopes, except for 3 and 4 . Typically, the Pb²⁺‐selective electrode based on 6 – 8 exhibited almost Nernstian slopes for Pb²⁺ over a relatively wide concentration range and had a fast response time as well as a long lifetime, although the silver ion interfered strongly. These ISEs based on 6 – 8 showed a relatively good Pb²⁺ selectivity against most of the interfering cations examined, except for Ag⁺. The effect of the side‐arm functions of calix[4]arene derivatives 2 – 8 on the Nernstian slopes and on the selectivity coefficients for Pb²⁺ obtained with the Pb²⁺ ISEs based on 2 – 8 is discussed.     

Semifluorinated Polymers as Ion‐selective Electrode Membrane Matrixes

Most commercially available fluorous polymers are ill suited for the fabrication of ion‐selective electrode (ISE) membranes. Therefore, we synthesized semifluorinated polymers for this purpose. Ionophore‐free ion‐exchanger electrodes made with these polymers show a selectivity range (≈14 orders of magnitude) that is nearly as wide as found previously for liquid fluorous ion‐exchanger electrodes. These polymers were also used to construct ISE membranes doped with fluorophilic silver ionophores. While the resulting ISEs were somewhat less selective than their fluorous counterparts, the semifluorinated polymers offer the advantage that they can be doped both with fluorophilic ionophores and traditional lipophilic ionophores, such as the silver ionophore Cu(II)‐I (o ‐xylylenebis[N,N ‐diisobutyldithiocarbamate]). We also cross‐linked these polymers, producing very durable membranes that retained broad selectivity ranges. K⁺ ISEs made with the cross‐linked semifluorinated polymer and the ionophore valinomycin showed selectivities similar to those of PVC membrane ISEs but with a superior thermal stability, the majority of the electrodes still giving a theoretical (Nernstian) response after exposure to a boiling aqueous solution for 10 h.     

Conducting Polymer‐Based Solid‐State Ion‐Selective Electrodes

Conducting polymers, i.e., electroactive conjugated polymers, are useful both as ion‐to‐electron transducers and as sensing membranes in solid‐state ion‐selective electrodes. Recent achievements over the last few years have resulted in significant improvements of the analytical performance of solid‐contact ion‐selective electrodes (solid‐contact ISEs) based on conducting polymers as ion‐to‐electron transducer combined with polymeric ion‐selective membranes. A significant amount of research has also been devoted to solid‐state ISEs based on conducting polymers as the sensing membrane. This review gives a brief summary of the progress in the area in recent years.     

Ultrathin pH‐Sensitive Nanoporous Membranes for Superfast Size‐Selective Separation

Stimuli‐responsive nanoporous membranes have attracted increasing interest in various fields due to their abrupt changes of permeation/separation in response to the external environment. Here we report ultrathin pH‐sensitive nanoporous membranes that are easily fabricated by the self‐assembly of poly(acrylic acid) (PAA) in a metal hydroxide nanostrand solution. PAA‐adsorbed nanostrands (2.5–5.0 nm) and PAA‐Cu^II nanogels (2.0–2.5 nm) grow competitively during self‐assembly. The PAA‐adsorbed nanostrands are deposited on a porous support to fabricate ultrathin PAA membranes. The membranes display ultrafast water permeation and good rejection as well as significant pH‐sensitivity. The 28 nm‐thick membrane has a water flux decrease from 3740 to 1350 L m^?1 h^?1 bar^?1 (pH 2.0 to 7.0) with a sharp decrease at pH 5.0. This newly developed pH‐sensitive nanoporous membranes may find a wide range of applications such as controlled release and size‐ and charge‐selective separation.     

Highly Selective All‐Plastic,Disposable, Cu2+‐Selective Electrodes

Conducting polymers (CP) remain a promising material to construct stable potential all‐solid‐state ion‐selective potentiometric electrodes. The unique properties of poly(3,4‐ethylenedioxythiophene) doped with poly(4‐styrenesulfonate) ions, PEDOT‐PSS: high CP stability and affinity of doping anions towards Cu²⁺ ions, make it highly attractive for construction of all‐solid‐state copper(II)‐selective electrodes with outstanding selectivity. The additional benefits can arise from solution processability of commercially available PEDOT‐PSS system. This material was highly promising for a new sensor arrangement, i.e. to obtain disposable, planar and flexible all‐plastic Cu²⁺‐selective electrodes. These sensors can be obtained by casting a commercially available dispersion of PEDOT‐PSS (Baytron P) on a plastic, non‐conducting support material. The CP being both electrical lead and ion‐to‐electron transducer, was covered with plastic, solvent polymeric Cu²⁺ selective membrane. This extremely simple arrangement, after conditioning in dilute Cu²⁺ solution, was characterized with linear Nernstian responses within the activities range from: 0.1 to 10^?4 M, followed by super‐Nernstian responses for lower activities. The latter result points to effective elimination of primary ions leakage from the plastic membrane / transducer phase and has resulted in significantly improved selectivities. Obtained log K values were equal to ?7.6 for Co²⁺, ?7.4 for Zn²⁺, ?7.2 for Ca²⁺ and ?6.8 for Na⁺, respectively.     

Click‐Conjugation of Nanogold‐Functionalized PAMAM Dendrimer: Toward a Novel Electrochemical Detection Platform

This work reports a new electrochemical monitoring platform for sensitive detection of Cu²⁺ coupling click chemistry with nanogold‐functionalized PAMAM dendrimer (AuNP‐PAMAM). The system involved an alkyne‐modified carbon electrode and an azide‐functionalized AuNP‐PAMAM. Initially, the added Cu²⁺ was reduced to Cu⁺ by the ascorbate, and then the azide‐modified AuNP‐PAMAM was covalently conjugated to the electrode via Cu⁺‐catalyzed azide‐alkyne click reaction. The carried AuNPs accompanying PAMAM dendrimer could be directly monitored by stripping voltammetry after acidic pretreatment. By introduction of high‐loading PAMAM dendrimer with gold nanoparticles, as low as 2.8 pM Cu²⁺ (ppt) could be detected, which was 125‐fold lower than that of gold nanoparticle‐based labeling strategy. The method exhibited high specificity toward target Cu²⁺ against other potentially interfering ions, and was applicable for monitoring Cu²⁺ in drinking water with satisfactory results.     

Double Metal Ions Competitively Control the Guest‐Sensing Process: A Facile Approach to Stimuli‐Responsive Supramolecular Gels

A facile approach to the design of stimuli‐responsive supramolecular gels (SRSGs) termed double‐metal‐ion competitive coordination control is reported. By this means, the fluorescence signals and guest‐selective responsiveness of the SRSGs are controlled by the competitive coordination of two different metal ions with the gelators and the target guest. To demonstrate this approach, a gelator G2 based on multiple self‐assembly driving forces was synthesized. G2 could form Ca²⁺‐coordinated metallogel CaG with strong aggregation‐induced emission (AIE). Doping of CaG with Cu²⁺ results in AIE quenching of CaG and formation of Ca²⁺‐ and Cu²⁺‐based metallogel CaCuG. CaCuG could fluorescently detect CN^? with specific selectivity through the competitive coordination of CN^? with the Cu²⁺ and the coordination of Ca²⁺ with G2 again. This approach may open up routes to novel stimuli‐responsive supramolecular materials.     

Application of 2‐(benzyliminomethyl)‐6‐methoxy‐4‐(4‐methoxyphenyl‐azo)phenol in construction of ion‐selective PVC membrane electrode for determination of copper (II) in mineral water sample

The potentiometric characteristics of a new Cu²⁺‐selective electrode based on 2‐(benzyliminomethyl)‐6‐methoxy‐4‐(4‐methoxyphenyl‐azo) phenol as an efficient ionophore has been evaluated. The effects of influential parameters on the potentiometric responses such as the amount of plasticizer, the amount of ionophore, pH of the sample solution, and the effect of coexisting ions on the electrode signal were subsequently investigated . The selectivity of the electrode was assessed by calculating the selectivity coefficients using the matched potential method. The optimum ratio of the amount of materials required for the preparation of the electrode was found to be 1.7: 32.1: 64.2: 2.0 corresponding to carboxylated PVC, dimethyl sebacate as solvent mediators, potassium tetrakis (p‐chlorophenyl) borate as the anion localizing agent, and ionophore, respectively. The electrode had a fast response (7s) as well as a satisfactory Nernstian slope (29.26±0.91 mV/decade) to Cu²⁺ over a wide concentration range of 2.0×10^?6‐ 5.0×10^?2 M with a low detection limit of 5.9×10^?7 M. The developed sensor was successfully used for the potentiometric titration of Cu²⁺ ion with EDTA and subsequently, efficient determination of this metal ion in a mineral water sample was performed.     

Ionophoric Properties of [14]Tetraazaannulene Derivatives and Substituent Effect on the Cation‐selectivity

[14]Tetraazaannulene derivatives 1–4 with various substituents were synthesized as ion recognition compounds. All solvent polymeric membrane electrodes incorporating [14]tetraazaannulene derivatives 1–4 showed rapid response for the Cu²⁺ ion and exhibited excellent selectivity over other mono‐ and divalent cations such as Ag⁺ and Ni²⁺ ions. The solvent polymeric membrane electrode based on [14]tetraazaannulene derivative 1 has a linear response to the Cu²⁺ ion from 5.01 × 10⁻⁷ – 2.63 × 10⁻⁴ M with a slope of 29.56 mV per decade. DFT calculations showed that the selectivities for the Cu²⁺ ion of the ISEs based on [14]tetraazaannulene derivatives 1–4 depended on both their topological and electrostatic properties caused by the introduced substituents.     

Ion‐selective Electrodes with 3D Nanostructured Conducting Polymer Solid Contact

Until now both ion‐to‐electron transducers as well as large surface area nanostructured conducting materials were successfully used as solid contacts for polymer‐based ion‐selective electrodes. We were interested to explore the combination of these two approaches by fabricating ordered electrically conducting polymer (ECP) nanostructures using 3D nanosphere lithography and electrosynthesis to provide a high surface area and capacitive interface for solid contact ion‐selective electrodes (SC‐ISEs). For these studies we used poly(3,4‐ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT(PSS)) films with 750 nm diameter interconnected pores as the intermediate layer between a glassy carbon electrode and a Ag⁺ ‐selective polymeric membrane. We also investigated the feasibility of loading the voids created in the polymer film with a lipophilic redox mediator (1,1’‐dimethylferrocene) to provide the respective ISEs with well‐defined/controllable E⁰ values. These expectations were fulfilled as the standard deviation of E⁰ values were reduced with almost an order of magnitude for 3D nanostructured SC‐ISEs filled with the redox mediator as compared to their redox mediator‐free analogs. The detrimental effect of the redox mediator extraction into the plasticized PVC‐based ion‐selective membrane (ISM) was efficiently suppressed by replacing the PVC‐based ISMs with a low diffusivity silicone rubber matrix.     

Harnessing the Flexibility of Peptidic Scaffolds to Control their Copper(II)‐Coordination Properties: A Potentiometric and Spectroscopic Study

Designing small peptides that are capable of binding Cu²⁺ ions mainly through the side‐chain functionalities is a hard task because the amide nitrogen atoms strongly compete for Cu²⁺ ion coordination. However, the design of such peptides is important for obtaining biomimetic small systems of metalloenyzmes as well as for the development of artificial systems. With this in mind, a cyclic decapeptide, C‐Asp, which contained three His residues and one Asp residue, and its linear derivative, O‐Asp, were synthesized. The C‐Asp peptide has two Pro? Gly β‐turn‐inducer units and, as a result of cyclization, and as shown by CD spectroscopy, its backbone is constrained into a more defined conformation than O‐Asp, which is linear and contains a single Pro? Gly unit. A detailed potentiometric, mass spectrometric, and spectroscopic study (UV/Vis, CD, and EPR spectroscopy) showed that at a 1:1 Cu²⁺/peptide ratio, both peptides formed a major [CuHL]²⁺ species in the pH range 5.0–7.5 (C‐Asp) and 5.5–7.0 (O‐Asp). The corrected stability constants of the protonated species (log K*_CuH(O?Asp)=9.28 and log K*_CuH(C?Asp)=10.79) indicate that the cyclic peptide binds Cu²⁺ ions with higher affinity. In addition, the calculated value of K_eff shows that this higher affinity for Cu²⁺ ions prevails at all pH values, not only for a 1:1 ratio but even for a 2:1 ratio. The spectroscopic data of both [CuHL]²⁺ species are consistent with the exclusive coordination of Cu²⁺ ions by the side‐chain functionalities of the three His residues and the Asp residue in a square‐planar or square‐pyramidal geometry. Nonetheless, although these data show that, upon metal coordination, both peptides adopt a similar fold, the larger conformational constraints that are present in the cyclic scaffold results in different behaviour for both [CuHL]²⁺ species. CD and NMR analysis revealed the formation of a more rigid structure and a slower Cu²⁺‐exchange rate for [CuH(C‐Asp)]²⁺ compared to [CuH(O‐Asp]²⁺. This detailed comparative study shows that cyclization has a remarkable effect on the Cu²⁺‐coordination properties of the C‐Asp peptide, which binds Cu²⁺ ions with higher affinity at all pH values, stabilizes the [CuHL]²⁺ species in a wider pH range, and has a slower Cu²⁺‐exchange rate compared to O‐Asp.     

Development and Optimization of an Ion‐selective Electrode for Serotonin Detection

Our studies are focused on the development of novel potentiometric sensors for the quantification of the neurotransmitter serotonin. Therefore, ion‐selective electrodes based on plasticized PVC membranes are applied. The electroactive part of the membrane consists of an ion pair complex formed between the protonated analyte and a carborane anion [Co(1,2‐C₂B₉H₁₁)₂]⁻. The analytical performance of the electrode was studied regarding sensitivity, concentration range, limit of detection and potential stability. The ion‐selective electrodes were optimized with respect to the material of the transducing element, as well as the membrane thickness and its composition. Stable, all solid state ISEs could be developed, using the non‐polar plasticizer NPOE and a graphite rod with high surface area as transducing element. We thus achieved a near Nernstian response over three decades of concentration (2.25⋅10^‐5‐1.00⋅10^‐2 M) and a limit of detection in the μ‐molar range for the optimized electrodes. The electrodes could successfully be miniaturized using carbon based screen printed electrodes.     

Sponge‐Like Behaviour in Isoreticular Cu(Gly‐His‐X) Peptide‐Based Porous Materials

We report two isoreticular 3D peptide‐based porous frameworks formed by coordination of the tripeptides Gly‐L ‐His‐Gly and Gly‐L ‐His‐L ‐Lys to Cu^II which display sponge‐like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H₂O while CO₂ adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbone, can be post‐synthetically modified to produce urea‐functionalised networks by following methodologies typically used for metal–organic frameworks built from more rigid “classical” linkers.     

Intercalation Compounds as Inner Reference Electrodes for Reproducible and Robust Solid‐Contact Ion‐Selective Electrodes

With billions of assays performed every year, ion‐selective electrodes (ISEs) provide a simple and fast technique for clinical analysis of blood electrolytes. The development of cheap, miniaturized solid‐contact (SC‐)ISEs for integrated systems, however, remains a difficult balancing act between size, robustness, and reproducibility, because the defined interface potentials between the ion‐selective membrane and the inner reference electrode (iRE) are often compromised. We demonstrate that target cation‐sensitive intercalation compounds, such as partially charged lithium iron phosphate (LFP), can be applied as iREs of the quasi‐first kind for ISEs. The symmetrical response of the interface potentials towards target cations ultimately results in ISEs with high robustness towards the inner filling (ca. 5 mV dec^?1 conc.) as well as robust and miniaturized SC‐ISEs. They have a predictable and stable potential derived from the LiFePO₄/FePO₄ redox couple (97.0±1.5 mV after 42 days).     

An Electrochemical Sensor for the Detection of Cu2+ Based on Gold Nanoflowers‐modifed Electrode and DNAzyme Functionalized Au@MIL‐101 (Fe)

In this study, we developed an electrochemical sensor for sensitive detection of Cu²⁺ based on gold nanoflowers (AuNFs)‐modified electrode and DNAzyme functionalized Au@MIL‐101(Fe) (MIL: Materials of Institute Lavoisier). The AuNFs‐modified indium tin oxide modified conductive glass electrode(AuNFs/ITO) prepared via electrodeposition showed improved electronic transport properties and provided more active sites to adsorb large amounts of oligonucleotide substrate (DNA1) via thiol‐gold bonds. The stable Au@MIL‐101(Fe) could guarantee the sensitivity because of its intrinsic peroxidase mimic property, while the Cu²⁺‐dependent DNA‐cleaving DNAzyme linked to Au@MIL‐101(Fe) achieved the selectivity toward Cu²⁺. After the DNAzyme substrate strand (DNA2) was cleaved into two parts due to the presence of Cu²⁺, the oligonucleotide fragment linked to MIL‐101(Fe) was able to hybridize with DNA1 adsorbed onto the surface of AuNFs/ITO. Due to the peroxidase‐like catalytic activity of MIL‐101(Fe) and the affinity recognition property of DNAzyme toward Cu²⁺, the electrochemical biosensor showed a sensitive detection range from 0.001 to 100 μM, a detection limit of 0.457 nM and a high selectivity, demonstrating its potential for Cu²⁺ detection in real environmental samples.