Chiral Isocamphoric Acid: Founding a Large Family of Homochiral Porous Materials

Homochiral metal–organic frameworks (MOFs) are an important class of chiral solids with potential applications in chiral recognition; however, relatively few are available. Of great importance is the availability of low‐cost, racemization‐resistant, and versatile enantiopure building blocks. Among chiral building blocks, d ‐camphoric acid is highly prolific, yet, its trans‐isomer, l ‐isocamphoric acid, has remained unknown in the entire field of solid‐state materials. Its rich yet totally untapped synthetic and structural chemistry has now been investigated through the synthesis of a large family of homochiral metal isocamphorates. The first observation of diastereoisomerism in isostructural MOFs is presented. Isocamphorate has a powerful ability to create framework topologies unexpected from common inorganic building blocks, and isocamphoric acid should allow access to hundreds of new homochiral materials.     

Electrically Conductive Porous Metal–Organic Frameworks

Owing to their outstanding structural, chemical, and functional diversity, metal–organic frameworks (MOFs) have attracted considerable attention over the last two decades in a variety of energy‐related applications. Notably missing among these, until recently, were applications that required good charge transport coexisting with porosity and high surface area. Although most MOFs are electrical insulators, several materials in this class have recently demonstrated excellent electrical conductivity and high charge mobility. Herein we review the synthetic and electronic design strategies that have been employed thus far for producing frameworks with permanent porosity and long‐range charge transport properties. In addition, key experiments that have been employed to demonstrate electrical transport, as well as selected applications for this subclass of MOFs, will be discussed.     

Modular,Homochiral, Porous Coordination Polymers: Rational Design,Enantioselective Guest Exchange Sorption and Ab Initio Calculations of Host–Guest Interactions

Two new, homochiral, porous metal–organic coordination polymers [Zn₂(ndc){(R)‐man}(dmf)]?3DMF and [Zn₂(bpdc){(R)‐man}(dmf)]?2DMF (ndc=2,6‐naphthalenedicarboxylate; bpdc=4,4′‐biphenyldicarboxylate; man=mandelate; dmf=N,N′‐dimethylformamide) have been synthesized by heating Zn^II nitrate, H₂ndc or H₂bpdc and chiral (R)‐mandelic acid (H₂man) in DMF. The colorless crystals were obtained and their structures were established by single‐crystal X‐ray diffraction. These isoreticular structures share the same topological features as the previously reported zinc(II) terephthalate lactate [Zn₂(bdc){(S)‐lac}(dmf)]?DMF framework, but have larger pores and opposite absolute configuration of the chiral centers. The enhanced pores size results in differing stereoselective sorption properties: the new metal–organic frameworks effectively and stereoselectively (ee up to 62 %) accommodate bulkier guest molecules (alkyl aryl sulfoxides) than the parent [Zn₂(bdc){(S)‐lac}(dmf)]?DMF, while the latter demonstrates decent enantioselectivity toward precursor of chiral anticancer drug sulforaphane, CH₃SO(CH₂)₄OH. The new homochiral porous metal–organic coordination polymers are capable of catalyzing a highly selective oxidation of bulkier sulfides (2‐NaphSMe (2‐C₁₀H₇SMe) and PhSCH₂Ph) that could not be achieved by the smaller‐pore [Zn₂(bdc){(S)‐lac}(dmf)]?DMF. The sorption of different guest molecules (both R and S isomers) into the chiral pores of [Zn₂(bdc){(S)‐lac}(dmf)]?DMF was modeled by using ab initio calculations that provided a qualitative explanation for the observed sorption enantioselectivity. The high stereo‐preference is accounted for by the presence of coordinated inner‐pore DMF molecule that forms a weak C? H???O bond between the DMF methyl group and the (S)‐PhSOCH₃ sulfinyl group.     

Defect‐Engineered Metal–Organic Frameworks

Defect engineering in metal–organic frameworks (MOFs) is an exciting concept for tailoring material properties, which opens up novel opportunities not only in sorption and catalysis, but also in controlling more challenging physical characteristics such as band gap as well as magnetic and electrical/conductive properties. It is challenging to structurally characterize the inherent or intentionally created defects of various types, and there have so far been few efforts to comprehensively discuss these issues. Based on selected reports spanning the last decades, this Review closes that gap by providing both a concise overview of defects in MOFs, or more broadly coordination network compounds (CNCs), including their classification and characterization, together with the (potential) applications of defective CNCs/MOFs. Moreover, we will highlight important aspects of “defect‐engineering” concepts applied for CNCs, also in comparison with relevant solid materials such as zeolites or COFs. Finally, we discuss the future potential of defect‐engineered CNCs.     

Size‐Dependent Enantioselective Adsorption of Racemic Molecules through Homochiral Metal–Organic Frameworks Embedding Helicity

Homochiral metal–organic frameworks (HMOFs) are efficient materials for enantioselective adsorption. However, the combination of size selectivity and enantioselectivity is still a major challenge in the field of HMOFs. Herein, two enantiomorphic HMOFs built from predesigned proline‐derived ligands are presented. Both of them show multiple homochiral features: they contain four different helical chains and three types of helical channels. Due to the size effect of the helical channels, each HMOF can enantioselectively adsorb methyl lactate with high ee. The results reveal a new approach toward size‐dependent enantioselective separation of racemic compounds by using HMOFs built from inexpensive proline derivatives.     

Unusual Interlocking and Interpenetration Lead to Highly Porous and Robust Metal–Organic Frameworks

Stop the breathing : As the organic bridging ligands become more elaborate and large, the resulting MOFs tend to experience significant framework distortion (i.e., breathing) upon solvent removal. Rigidification of MOFs that are built from elongated tetracarboxylate bridging ligands by unusual interlocking and interpenetration leads to highly porous and robust hybrid materials.

     

Engineering Homochiral Metal–Organic Frameworks by Spatially Separating 1D Chiral Metal–Peptide Ladders: Tuning the Pore Size for Enantioselective Adsorption

The reaction of the chiral dipeptide glycyl‐L(S)‐glutamate with Co^II ions produces chiral ladders that can be used as rigid 1D building units. Spatial separation of these building units with linkers of different lengths allows the engineering of homochiral porous MOFs with enhanced pore sizes, pore volumes, and surface areas. This strategy enables the synthesis of a family of isoreticular MOFs, in which the pore size dictates the enantioselective adsorption of chiral molecules (in terms of their size and enantiomeric excess).     

Achieving a Rare Breathing Behavior in a Polycatenated 2 D to 3 D Net through a Pillar‐Ligand Extension Strategy

Through a pillar‐ligand extension strategy, a rare breathing behavior in polycatenated 2D→3D nets has been achieved. Three variants exhibit interesting sorption properties that range from non‐breathing to breathing behaviors, which is influenced by the angles between the pillars and the single honeycomb layers. The increase in pillar length does not lead to an increase in polycatenation multiplicity, which is controlled by the length of intralayer tripodal carboxylate. It also does not induce obviously expanded interlayer separations but occupies much more the free voids, and as a consequence, a smaller pore volume is obtained. This suggests that in 2D→3D polycatenated bilayer metal–organic frameworks, the porosity is not always enhanced by increasing the length of the interlayer pillars with the intralayer linker remaining unchanged.     

Isostructural Metal–Organic Frameworks Assembled from Functionalized Diisophthalate Ligands through a Ligand‐Truncation Strategy

Four isostructural metal–organic frameworks (MOFs) with various functionalized pore surfaces were synthesized from a series of diisophthalate ligands. These MOFs exhibit a new network topology of {4.6⁴.8}₂{4².6⁴}{6⁴.8²}₂{6⁶}. Hydrogen uptake as high as 2.67 wt % at 77 K/1 bar and CO₂ uptake of 15.4 wt % at 297 K/1 bar have been observed for PCN‐308, which contains ? CF₃ groups. The isostructural series of MOFs also showed reasonable adsorption selectivity of CO₂ over CH₄ and N₂.     

Proton Conduction in Metal–Organic Frameworks and Related Modularly Built Porous Solids

Proton‐conducting materials are an important component of fuel cells. Development of new types of proton‐conducting materials is one of the most important issues in fuel‐cell technology. Herein, we present newly developed proton‐conducting materials, modularly built porous solids, including coordination polymers (CPs) or metal–organic frameworks (MOFs). The designable and tunable nature of the porous materials allows for fast development in this research field. Design and synthesis of the new types of proton‐conducting materials and their unique proton‐conduction properties are discussed.     

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal–organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one‐pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball‐and‐stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.     

Metal–Organic Frameworks (MOFs) as Safer,Structurally Reinforced Energetics

Second‐generation cobalt and zinc coordination architectures were obtained through efforts to stabilize extremely sensitive and energetic transition‐metal hydrazine perchlorate ionic polymers. Partial ligand substitution by the tridentate hydrazinecarboxylate anion afforded polymeric 2D‐sheet structures never before observed for energetic materials. Carefully balanced reaction conditions allowed the retention of the noncoordinating perchlorate anion in the presence of a strongly chelating hydrazinecarboxylate ligand. High‐quality X‐ray single‐crystal structure determination revealed that the metal coordination preferences lead to different structural motifs and energetic properties, despite the nearly isoformulaic nature of the two compounds. Energetic tests indicate highly decreased sensitivity and DFT calculations suggest a high explosive performance for these remarkable structures.     

Dynamic Calcium Metal–Organic Framework Acts as a Selective Organic Solvent Sponge

Herein, we present a Ca‐based metal–organic framework named AEPF‐1, which is an active and selective catalyst in olefin hydrogenation reactions. AEPF‐1 exhibits a phase transition upon desorption of guest molecules. This structural transformation takes place by a crystal to crystal transformation accompanied by the loss of single‐crystal integrity. Powder diffraction methods and computational studies were applied to determine the structure of the guest‐free phase. This work also presents data on the exceptional adsorption behavior of this material, which is shown to be capable of separating polar from nonpolar organic solvents, and is a good candidate for selective solvent adsorption under mild conditions.     

Metal–Organic Frameworks for Oxygen Storage

We present a systematic study of metal–organic frameworks (MOFs) for the storage of oxygen. The study starts with grand canonical Monte Carlo simulations on a suite of 10 000 MOFs for the adsorption of oxygen. From these data, the MOFs were down selected to the prime candidates of HKUST‐1 (Cu‐BTC) and NU‐125, both with coordinatively unsaturated Cu sites. Oxygen isotherms up to 30 bar were measured at multiple temperatures to determine the isosteric heat of adsorption for oxygen on each MOF by fitting to a Toth isotherm model. High pressure (up to 140 bar) oxygen isotherms were measured for HKUST‐1 and NU‐125 to determine the working capacity of each MOF. Compared to the zeolite NaX and Norit activated carbon, NU‐125 has an increased excess capacity for oxygen of 237 % and 98 %, respectively. These materials could ultimately prove useful for oxygen storage in medical, military, and aerospace applications.     

Chiral Metal–Organic Frameworks Bearing Free Carboxylic Acids for Organocatalyst Encapsulation

Two chiral carboxylic acid functionalized micro‐ and mesoporous metal–organic frameworks (MOFs) are constructed by the stepwise assembly of triple‐stranded heptametallic helicates with six carboxylic acid groups. The mesoporous MOF with permanent porosity functions as a host for encapsulation of an enantiopure organic amine catalyst by combining carboxylic acids and chiral amines in situ through acid–base interactions. The organocatalyst‐loaded framework is shown to be an efficient and recyclable heterogeneous catalyst for the asymmetric direct aldol reactions with significantly enhanced stereoselectivity in relative to the homogeneous organocatalyst.