Carbon Nanotube@N‐Doped Mesoporous Carbon Composite Material for Supercapacitor Electrodes

Here, carbon nanotube@N‐doped mesoporous carbon (CNT@N‐PC) composites were synthesized by using resorcinol‐formaldehyde resin as carbon source, ionic liquids (ILs) as template, and nitrogen sources and tetraethyl orthosilicate (TEOS) as assistant agent. The use of ILs‐modified CNT with nitrogen and TEOS facilitated the generation of a richer mesoporous structure. The obtained CNT@N‐PC was composed of a CNT core and mesoporous carbon particles around it. CNT@N‐PC showed a 3D network structure like “dewy cobwebs” and had a high surface area of 857 m² g^?1, uniform pore size distribution (3.0 nm), and suitable N content (4.9 at.%). When used as supercapacitor electrode, the CNT@N‐PC exhibited a high specific capacitance (244 F g^?1 at 1 A g^?1), good rate capability and favorable capacitance retention (92.5 % capacitive retention after 5000 cycles), demonstrating the potential for application in high‐performance supercapacitors.     

Single‐Step Synthesis of Mesoporous Carbon Nitride/Molybdenum Sulfide Nanohybrids for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising candidate as a high‐performing anode material for sodium‐ion batteries (SIBs) due to its large interlayer spacing. However, it suffers from continued capacity fading. This problem could be overcome by hybridizing MoS₂ with nanostructured carbon‐based materials, but it is quite challenging. Herein, we demonstrate a single‐step strategy for the preparation of MoS₂ coupled with ordered mesoporous carbon nitride using a nanotemplating approach which involves the pyrolysis of phosphomolybdic acid hydrate (PMA), dithiooxamide (DTO) and 5‐amino‐1H‐tetrazole (5‐ATTZ) together in the porous channels of 3D mesoporous silica template. The sulfidation to MoS₂, polymerization to carbon nitride (CN) and their hybridization occur simultaneously within a mesoporous silica template during a calcination process. The CN/MoS₂ hybrid prepared by this unique approach is highly pure and exhibits good crystallinity as well as delivers excellent performance for SIBs with specific capacities of 605 and 431 mAhg^?1 at current densities of 100 and 1000 mAg^?1, respectively, for SIBs.     

Synthesis of Nitrogen‐Doped Mesoporous Carbon Spheres with Extra‐Large Pores through Assembly of Diblock Copolymer Micelles

The synthesis of highly nitrogen‐doped mesoporous carbon spheres (NMCS) is reported. The large pores of the NMCS were obtained through self‐polymerization of dopamine (DA) and spontaneous co‐assembly of diblock copolymer micelles. The resultant narrowly dispersed NMCS possess large mesopores (ca. 16 nm) and small particle sizes (ca. 200 nm). The large pores and small dimensions of the N‐heteroatom‐doped carbon spheres contribute to the mass transportation by reducing and smoothing the diffusion pathways, leading to high electrocatalytic activity.     

A Rational Repeating Template Method for Synthesis of 2 D Hexagonally Ordered Mesoporous Precious Metals

A repeating template method is presented for the synthesis of mesoporous metals with 2D hexagonal mesostructures. First, a silica replica (i.e., silica nanorods arranged periodically) is prepared by using 2D hexagonally ordered mesoporous carbon as the template. After that, the obtained silica replica is used as the second template for the preparation of mesoporous ruthenium. After the ruthenium species are introduced into the silica replica, the ruthenium species are then reduced by a vapor‐infiltration method by using the reducing agent dimethylamine borane. After the ruthenium deposition, the silica is chemically removed. Analysis by transmission and scanning electron microscopies, a nitrogen‐adsorption–desorption isotherm, and small‐angle X‐ray scattering revealed that the mesoporous ruthenium had a 2D hexagonal mesostructure, although the mesostructural ordering is decreased compared to that of the original mesoporous carbon template. This method is widely applicable to other metal systems. By changing the metal species introduced into the silica replica, several mesoporous metals (palladium and platinum) can be synthesized. Ordered mesoporous ruthenium and palladium, which are not easily attainable by the soft‐templating methods, can be prepared. This study has overcome the composition variation limitations of the soft‐templating method.     

Dual Soft‐Template System Based on Colloidal Chemistry for the Synthesis of Hollow Mesoporous Silica Nanoparticles

A new dual soft‐template system comprising the asymmetric triblock copolymer poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide) (PS‐b‐P2VP‐b‐PEO) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is used to synthesize hollow mesoporous silica (HMS) nanoparticles with a center void of around 17 nm. The stable PS‐b‐P2VP‐b‐PEO polymeric micelle serves as a template to form the hollow interior, while the CTAB surfactant serves as a template to form mesopores in the shells. The P2VP blocks on the polymeric micelles can interact with positively charged CTA⁺ ions via negatively charged hydrolyzed silica species. Thus, dual soft‐templates clearly have different roles for the preparation of the HMS nanoparticles. Interestingly, the thicknesses of the mesoporous shell are tunable by varying the amounts of TEOS and CTAB. This study provides new insight on the preparation of mesoporous materials based on colloidal chemistry.     

Synthesis of Olive‐Shaped Mesoporous Platinum Nanoparticles (MPNs) with a Hard‐Templating Method Using Mesoporous Silica (SBA‐15)

Well‐ordered mesoporous Pt nanoparticles (MPNs) with uniform olive shapes are synthesized by using two‐dimensional (2D) hexagonal mesoporous silica (SBA‐15) as a hard template. The average particle sizes are controllable in the range of 150 to 230 nm by changing the reduction time. Low‐angle XRD profiles for the obtained MPNs show three distinct peaks assignable to the (10), (11), and (20) planes of a highly ordered 2D hexagonal symmetry. From high‐magnification SEM images, periodically arranged Pt nanowires are observed clearly, which are a negative replica of the 2D hexagonally ordered mesoporous silica (SBA‐15). Furthermore, the single crystallinity of the Pt fcc structure coherently extends over the whole particles. As a result of such unique character as well as high surface area, the obtained MPNs show distinctly enhanced electrocatalytic properties for methanol oxidation reaction compared to other Pt samples, such as Pt black.     

Rational Design of Mesoporous Metals and Related Nanomaterials by a Soft‐Template Approach

We review recent developments in the preparation of mesoporous metals and related metal‐based nanomaterials. Among the many types of mesoporous materials, mesoporous metals hold promise for a wide range of potential applications, such as in electronic devices, magnetic recording media, and metal catalysts, owing to their metallic frameworks. Mesoporous metals with highly ordered networks and narrow pore‐size distributions have traditionally been produced by using mesoporous silica as a hard template. This method involves the formation of an original template followed by deposition of metals within the mesopores and subsequent removal of the template. Another synthetic method is the direct‐template approach from lyotropic liquid crystals (LLCs) made of nonionic surfactants at high concentrations. Direct‐template synthesis creates a novel avenue for the production of mesoporous metals as well as related metal‐based nanomaterials. Many mesoporous metals have been prepared by the chemical or electrochemical reduction of metal salts dissolved in aqueous LLC domains. As a soft template, LLCs are more versatile and therefore more advantageous than hard templates. It is possible to produce various nanostructures (e.g., lamellar, 2D hexagonal (p6mm), and 3D cubic (Ia d)), nanoparticles, and nanotubes simply by controlling the composition of the reaction bath.     

Two‐Dimensional Mesoscale‐Ordered Conducting Polymers

Despite the availability of numerous two‐dimensional (2D) materials with structural ordering at the atomic or molecular level, direct construction of mesoscale‐ordered superstructures within a 2D monolayer remains an enormous challenge. Here, we report the synergic manipulation of two types of assemblies in different dimensions to achieve 2D conducting polymer nanosheets with structural ordering at the mesoscale. The supramolecular assemblies of amphipathic perfluorinated carboxylic acids and block co‐polymers serve as 2D interfaces and meso‐inducing moieties, respectively, which guide the polymerization of aniline into 2D, free‐standing mesoporous conducting polymer nanosheets. Grazing‐incidence small‐angle X‐ray scattering combined with various microscopy demonstrates that the resulting mesoscale‐ordered nanosheets have hexagonal lattice with d‐spacing of about 30 nm, customizable pore sizes of 7–18 nm and thicknesses of 13–45 nm, and high surface area. Such template‐directed assembly produces polyaniline nanosheets with enhanced π–π stacking interactions, thereby resulting in anisotropic and record‐high electrical conductivity of approximately 41 S cm^?1 for the pristine polyaniline nanosheet based film and approximately 188 S cm^?1 for the hydrochloric acid‐doped counterpart. Our moldable approach creates a new family of mesoscale‐ordered structures as well as opens avenues to the programmed assembly of multifunctional materials.     

Copper nanoparticles incorporated on a mesoporous carbon nitride,an excellent catalyst in the Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles

Cu nanoparticles with average particles size around 10 nm were incorporated on the surface of a mesoporous carbon nitride support. The XRD and N₂ adsorption isotherms show that it maintains a hexagonal mesoporous structure with a high surface area (600.03 m² g^?1). The embedded Cu nanoparticles exhibit extremely high catalytic performance in two different kinds of organic reactions. The Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles were all accomplished.     

Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications

The synthesis of mesoporous Prussian blue analogues through a template‐free methodology and the application of these mesoporous materials as high‐performance cathode materials in sodium‐ion batteries is presented. Crystalline mesostructures were produced through a synergistically coupled nanocrystal formation and aggregation mechanism. As cathodes for sodium‐ion batteries, the Prussian blue analogues all show a reversible capacity of 65 mA h g^?1 at low current rate and show excellent cycle stability. The reported method stands as an environmentally friendly and low‐cost alternative to hard or soft templating for the fabrication of mesoporous materials.     

General Formation of Macro-/Mesoporous Nanoshells from Interfacial Assembly of Irregular Mesostructured Nanounits

Mesoporous core–shell nanostructures with controllable ultra-large open channels in their nanoshells are of great interest. However, soft template-directed cooperative assembly to mesoporous nanoshells with highly accessible pores larger than 30 nm, or even above 50 nm into macroporous range, remains a significant challenge. Herein we report a general approach for precisely tailored coating of hierarchically macro-/mesoporous polymer and carbon shells, possessing highly accessible radial channels with extremely wide pore size distribution from ca. 10 nm to ca. 200 nm, on diverse functional materials. This strategy creates opportunities to tailor the interfacial assembly of irregular mesostructured nanounits on core materials and generate various core–shell nanomaterials with controllable pore architectures. The obtained Fe,N-doped macro-/mesoporous carbon nanoshells show enhanced electrochemical performance for the oxygen reduction reaction in alkaline condition.     

Synthesis of N‐Doped Mesoporous Carbon Nanorods through Nano‐Confined Reaction: High‐Performance Catalyst Support for Hydrogenation of Phenol Derivatives

Traditional hard‐template methods for the preparation of mesoporous carbon structures have been well developed, but there are difficulties associated with complete filling of the organic precursors in ordered mesochannels and exact replication of the templates. Herein, mesoporous carbon nanorods (meso‐CNRs) were synthesized through thermal condensation of furfuryl alcohol followed by the nano‐confined decomposition of polyfurfuryl alcohol in silica nanotubes (SiO₂ NTs) with porous shells. Limited and slow release of gaseous water through the porous shells and finite polyfurfuryl precursor inside silica nanotubes are responsible for the formation of the mesoporous structures. Nitrogen can be doped into the meso‐CNRs by adding guanidine hydrochloride to the precursors. The nitrogen dopant not only stabilizes the ultrasmall and active Pd nanocatalyst in the meso‐CNRs but also increases the electron density of Pd and accelerates the dissociation of H₂, both of which increase the catalytic activity of the Pd catalyst in hydrogenation reactions.     

Cross‐Linked Polyphosphazene Hollow Nanosphere‐Derived N/P‐Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom‐doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template‐free approach to construct cross‐linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P‐doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g^?1). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co‐N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom‐containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

Control of Drug Release through the In Situ Assembly of Stimuli‐Responsive Ordered Mesoporous Silica with Magnetic Particles

A site‐selective controlled delivery system for controlled drug release is fabricated through the in situ assembly of stimuli‐responsive ordered SBA‐15 and magnetic particles. This approach is based on the formation of ordered mesoporous silica with magnetic particles formed from Fe(CO)₅ via the surfactant‐template sol‐gel method and control of transport through polymerization of N‐isopropyl acrylamide inside the pores. Hydrophobic Fe(CO)₅ acts as a swelling agent as well as being the source of the magnetic particles. The obtained system demonstrates a high pore diameter (7.1 nm) and pore volume (0.41 cm³ g^?1), which improves drug storage for relatively large molecules. Controlled drug release through the porous network is demonstrated by measuring the uptake and release of ibuprofen (IBU). The delivery system displays a high IBU storage capacity of 71.5 wt %, which is almost twice as large as the highest value based on SBA‐15 ever reported. In vitro testing of IBU loading and release exhibits a pronounced transition at around 32 °C, indicating a typical thermosensitive controlled release.     

Usefulness of Mesoporous Silica as a Template for the Preparation of Bundles of Bi Nanowires with Precisely Controlled Diameter Below 10 nm

The reduction of the diameter of Bi nanowires below 10 nm has been an important target because of the theoretical prediction with regard to significant enhancement in thermoelectric performance by size reduction. In this study, we have demonstrated the usefulness of mesoporous silica with tunable pore size as a template for the preparation of thin Bi nanowires with diameters below 10 nm. Bi was deposited within the templates through a liquid phase deposition using hexane and 1,1,3,3‐tetramethyldisiloxane as a solvent and reducing agent, respectively. Bundles of thin Bi nanowires with non‐crystalline frameworks were successfully obtained after the template removal. The diameter was precisely controlled between about 6 nm and 9 nm. The judicious choices of mesoporous silica and deposition conditions are critical for the successful preparation. The reliable formation of such thin Bi nanowires reported here opens up exciting new possibilities.     

Nitrogen‐Doped Carbon Nanosheets with Size‐Defined Mesopores as Highly Efficient Metal‐Free Catalyst for the Oxygen Reduction Reaction

Nitrogen‐doped carbon nanosheets (NDCN) with size‐defined mesopores are reported as highly efficient metal‐free catalyst for the oxygen reduction reaction (ORR). A uniform and tunable mesoporous structure of NDCN is prepared using a templating approach. Such controlled mesoporous structure in the NDCN exerts an essential influence on the electrocatalytic performance in both alkaline and acidic media for the ORR. The NDCN catalyst with a pore diameter of 22 nm exhibits a more positive ORR onset potential than that of Pt/C (?0.01 V vs. ?0.02 V) and a high diffusion‐limited current approaching that of Pt/C (5.45 vs. 5.78 mA cm^?2) in alkaline medium. Moreover, the catalyst shows pronounced electrocatalytic activity and long‐term stability towards the ORR under acidic conditions. The unique planar mesoporous shells of the NDCN provide exposed highly electroactive and stable catalytic sites, which boost the electrocatalytic activity of metal‐free NDCN catalyst.     

Confined Nanospace Pyrolysis for the Fabrication of Coaxial Fe3O4@C Hollow Particles with a Penetrated Mesochannel as a Superior Anode for Li‐Ion Batteries

In this study, a method is developed to fabricate Fe₃O₄@C particles with a coaxial and penetrated hollow mesochannel based on the concept of “confined nanospace pyrolysis”. The synthesis involves the production of a polydopamine coating followed by a silica coating on a rod‐shaped β‐FeOOH nanoparticle, and subsequent treatment by using confined nanospace pyrolysis and silica removal procedures. Typical coaxial hollow Fe₃O₄@C possesses a rice‐grain morphology and mesoporous structure with a large specific surface area, as well as a continuous and flexible carbon shell. Electrochemical tests reveal that the hollow Fe₃O₄@C with an open‐ended nanostructure delivers a high specific capacity (ca. 864 mA h g^?1 at 1 A g^?1), excellent rate capability with a capacity of about 582 mA h g^?1 at 2 A g^?1, and a high Coulombic efficiency (>97 %). The excellent electrochemical performance benefits from the hollow cavity with an inner diameter of 18 nm and a flexible carbon shell that can accommodate the volume change of the Fe₃O₄ during the lithium insertion/extraction processes as well as the large specific surface area and open inner cavity to facilitate the rapid diffusion of lithium ions from electrolyte to active material. This fabrication strategy can be used to generate a hollow or porous metal oxide structure for high‐performance Li‐ion batteries.     

Side‐Chain‐Directed Dispersion of MoS2 Nanosheets by V‐Shaped Polyaromatic Compounds

Bulk molybdenum disulfide (MoS₂) itself is virtually insoluble in common organic solvents because of the tight stacks of multiple MoS₂ nanosheets. Here we report that V‐shaped polyaromatic compounds with non‐ionic side chains can efficiently exfoliate and disperse the inorganic nanosheets. Simple grinding and sonication (less than total 1 h) of MoS₂ powder with the V‐shaped compounds gave rise to large MoS₂ nanosheets highly dispersed in NMP through efficient host‐guest S–π interactions. DLS and AFM analyses revealed that the lateral sizes (ca. 150–270 nm) and thicknesses (ca. 2–8 nm) of the products depend on the identity of the non‐ionic side chains on the V‐shaped dispersant.     

Dual‐Pore Mesoporous Carbon@Silica Composite Core–Shell Nanospheres for Multidrug Delivery

Monodispersed mesoporous phenolic polymer nanospheres with uniform diameters were prepared and used as the core for the further growth of core–shell mesoporous nanorattles. The hierarchical mesoporous nanospheres have a uniform diameter of 200 nm and dual‐ordered mesopores of 3.1 and 5.8 nm. The hierarchical mesostructure and amphiphilicity of the hydrophobic carbon cores and hydrophilic silica shells lead to distinct benefits in multidrug combination therapy with cisplatin and paclitaxel for the treatment of human ovarian cancer, even drug‐resistant strains.     

Carbon Nanoparticle Surface Electrochemistry: High‐Density Covalent Immobilisation and Pore‐Reactivity of 9,10‐Anthraquinone

2‐Bromomethyl‐9,10‐anthraquinone is covalently bound to carbon nanoparticle surfaces (Emperor 2000, Cabot Corp., with sulphonamide groups, ca. 9 to 18 nm diameter) with a coverage of ca. 250 anthraquinone molecules per particle (ca. 180 Ų per anthraquinone). The resulting hydrophobic carbon particles are dispersed in ethanol and coated onto glassy carbon electrodes. Electrochemical experiments are reported demonstrating the effect of surface coverage, scan rate, and pH. A linear shift in reversible potential of ca. 59 mV per pH unit from pH 2 to 12 is observed consistent with the reversible 2‐electron 2‐proton reduction of anthraquinone. High density of anthraquinone in carbon nanoparticle aggregates causes buffer capacity effects. Binding of hydrophobic tetraphenylborate anions into carbon nanoparticle aggregate pores is demonstrated. Applications in buffer characterisation and pH‐sensing are discussed.