In situ spectroscopic ellipsometry of pH-responsive polymer brushes on gold substrates

The dynamic and reversible switching behaviour of polyelectrolyte brushes of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) toward changes of the pH value was studied by in situ VIS-spectroscopic ellipsometry (SE). For this, PDMAEMA brushes with three different molecular weights were synthesized via the “grafting from” method using surface initiated atom transfer radical polymerization. In detail, the applicability of different SE data modelling to describe the optical properties of the different brush layers in the swollen and collapsed state was investigated. Especially for the PDMAEMA brushes with a high molecular weight, an improved optical modelling of the experimental data could be achieved and revealed an exponential distribution of the PDMAEMA fraction in the brush layer.

Voltammetric investigation of cytochrome c on gold coated with a self-assembled glutathione monolayer

The direct, reversible electrochemistry of horse-heart cytochrome c (cyt. c) was realized on a self-assembled glutathione (GSH) monolayer modified Au electrode. The voltammetric responses of cyt. c on GSH/Au electrode were found to be affected by pH during the electrode modification, metal ions and surfactants. Using potassium ferricyanide [K4Fe(CN)6] as a probe, these effects on the voltammetric responses of cyt. c were characterized by electrochemical methods. It was found that the pH during the electrode modification, metallic ions and surfactants changed GSH monolayer's charge state and the conformation on the electrode surface, and resulted in the influence on the voltammetric responses of cyt. c. The experimental results provided us information to understand the mechanism of the interfacial electron transfer of electrode-protein, as well as the electron transfer of cyt. c in life system.     

D-penicillamine adsorption on gold: an in situ ATR-IR spectroscopic and QCM study

The adsorption of penicillamine from ethanol on gold was studied in situ by attenuated total reflection infrared (ATR-IR) and quartz crystal microbalance (QCM) experiments. Both ATR-IR and QCM reveal a fast mass uptake. In ethanol, the molecule adopts a zwitterionic form. Upon adsorption, part of the molecules deprotonate at the amine group, which is a relatively slow process that goes along with a strong shift of the nu(as)(COO(-)) mode. Both ATR-IR and QCM confirm a physisorbed layer. ATR-IR furthermore shows that the latter consists of zwitterionic molecules only, whereas both zwitterionic and anionic species are found in the chemisorbed layer. The infrared spectra of the physisorbed and chemisorbed layers are rather different, and the molecules within both layers seem to be oriented with respect to the surface. The ATR-IR spectra furthermore indicate that all three functional groups of penicillamine (i.e., thiol, carboxylate, and amine) interact with the surface, and density functional theory calculations support this finding. QCM also shows that the molecule uses considerably more space on the surface than molecules of similar size, which supports a three-point interaction. The latter leads to a strong anchoring of the molecule to the metal, which may explain the exceptional capability of penicillamine to bind metals.     

Formation and cross-linking of fibrinogen layers monitored with in situ spectroscopic ellipsometry

Thick matrices of fibrinogen with incorporation of a matrix metalloproteinase inhibitor were covalently bonded on functionalized silicon surfaces using an ethyl-3-dimethyl-aminopropyl-carbodiimide and N-hydroxy-succinimide affinity ligand coupling chemistry. The growth of the structure was followed in situ using dynamic ellipsometry and characterized at steady-state with spectroscopic ellipsometry. The growth was compared with earlier work on ex situ growth of fibrinogen layers studied by single wavelength ellipsometry. It is found that in situ growth and ex situ growth yield different structural properties of the formed protein matrix. Fibrinogen matrices with thicknesses up to 58 nm and surface mass densities of 1.6 μg/cm² have been produced.     

Infrared spectroscopic ellipsometry of n-alkylthiol (C5-C18) self-assembled monolayers on gold

The infrared spectroscopic ellipsometry (IRSE) of n-alkylthiol (CH3(CH2)xSH, x = 4, 6, 7, 8, 10, 13, 15, and 17, self-assembled monolayers (SAMs), with 5-18 carbon atoms (C5-C18), grown on gold-coated Si(100) substrates) was investigated at room temperature. The C-H stretching vibrations could be resolved even for pentathiol, the shortest chain studied. The symmetric and asymmetric stretching vibrations of the CH2 groups are located at about 2850 and 2920 cm(-1), and those of CH3 are at about 2877 and 2962 cm(-1), respectively; they show a slight shift with the number of CH2 units. In addition, Fermi resonance of the symmetric CH3 stretching vibration at 2940 cm(-1) appears with decreasing chain length due to weak coupling with the asymmetric CH2 stretching vibration. The "odd-even effect" of the n-alkylthiol SAMs with varying CH2 units could be distinguished by the two interactive IRSE parameters. The relative ellipsometric spectra for the four longest chains could be reproduced quite well by using a Lorentz multioscillator model with a three-phase optical model (air/SAMs/gold). On the basis of the theoretical calculations, the vibrational strength of these oscillators is very weak, its magnitude being 10(-4)-10(-5). The full width at half-maximum (fwhm) of the peaks varies from 7 to 33 cm(-1). Moreover, the intensity of the C-H vibrations increases with the number of methylene units, due to strong lateral interactions and ordering effects occurring for longer chains.     

Electron-donating properties of p-phenylene phosphine imides: an electrochemical and spectroscopic investigation

[reaction: see text] Electronic properties of phosphine imide based organic electron donors have been investigated. N,N'-p-Phenylenebis(triphenyl)phosphine imide (Ph(3)P=NC(6)H(4)N=PPh(3), 1) has two reversible single-electron oxidations (0.04 and 0.53 V vs SCE). Spectroscopic investigations of poly(p-phenylene phosphine imide)s (2) are similar to those of polymer model compounds, suggesting formation of localized radical cations on the polymer chains and electronically insulating phosphorus atoms.     

基于偏振光波导分光光谱技术原位研究纳米金-细胞色素c 自组装过程

时间分辨偏振光波导分光光谱技术是一种用于研究表面分子吸附动力学的强大工具. 利用该技术实时、原位监测纳米金与细胞色素c的静电自组装过程, 发现随着吸附层数的增加, 纳米金粒子吸附层产生的局域等离子体共振(LSPR)吸收峰发生了红移, 而且在横磁(TM)模式下的红移比横电(TE)模式下的红移更快; 细胞色素c在纳米金表面的吸附导致LSPR吸收峰的峰位和强度在TM模式下显著红移和升高, 相比之下, TE模式下的LSPR吸收峰无明显变化. 对实验数据的分析验证了纳米金在细胞色素c单分子层表面的吸附动力学行为遵循扩散控制模型, 细胞色素c在纳米金单粒子层表面的吸附动力学行为遵循Langmuir等温吸附模型, 进一步估算了细胞色素c在纳米金表面的吸附速率常数、脱附速率常数和吸附自由能.     

Cytochrome c unfolding on an anionic surface

It is now well accepted that the adsorption of proteins to solid supports sometimes involves surface-mediated unfolding. A detailed understanding of the adsorption and surface-mediated unfolding process is lacking. We selected a well studied protein, horse heart cytochrome c, and a weakly ionic support to examine some of the characteristics of protein adsorption under near-physiological conditions. We used high-performance liquid chromatography (HPLC) to investigate the effect of temperature on surface-mediated unfolding. Samples of cytochrome c were introduced to an anionic support, and a NaCl gradient was used to desorb the protein at different times and temperatures. The profiles and retention times were monitored to examine the adhesive properties of cytochrome c to the anionic support. We found that protein retention increased with time at temperatures as low as 0 degrees C, and a significant loss of cytochrome c occurred between 55 degrees C and 70 degrees C. The loss of recovery of cytochrome c indicates irreversible surface-mediated unfolding. The changes in retention time may indicate more subtle transitions, including reversible surface-mediated unfolding of cytochrome c. These results suggest that perturbations in the structure as well as unfolding of cytochrome c can be detected at a lower temperature on an anionic surface than in solution thereby acting like a catalyst for protein unfolding.     

Surface coordination of nitric oxide to a self-assembled monolayer of a triruthenium cluster: an in situ infrared spectroscopic study

Coordination of nitric oxide (NO) to a self-assembled monolayer (SAM) of a triruthenium (Ru(3)) cluster, [Ru(3)(micro(3)-O)(micro-CH(3)COO)(6)(CO)(L(1))(L(2))] (0) (L(1) = [(NC(5)H(4))CH(2)NHC(O)(CH(2))(10)S-](2), L(2) = 4-methylpyridine), on a gold electrode surface has been studied by electrochemical and in situ infrared (IR) spectroscopic measurements. Ligand substitution reaction of NO for carbon monoxide (CO) ligands in the SAM strongly depends on the oxidation state of the terminal Ru(3) cluster. NO can be introduced into the Ru(3) cluster in the SAM with a high yield after one-electron oxidation of the Ru(3) core to a (III,III,III) oxidation state, while no coordination reaction occurs at the initial oxidation state (II,III,III) of the Ru(3) cluster. The kinetics of the NO coordination and desorption processes is also evaluated by time-resolved in situ IR spectroscopy. Finally, we demonstrate that the SAM with NO/CO randomly mixed ligands at a desired ratio can be constructed on the gold surface by tuning a suitable oxidation state of the Ru 3 cluster under electrochemical control.     

Optical and spectroscopic investigation on Calcium Borotellurite glass system

In this work, the glass formation in Calcium Borotellurite (CBTx) system and their optical properties were studied. Six glass samples were prepared by melt-quenching technique and the samples obtained are transparent, lightly yellowish, without any visible crystallites. The results showed that TeO₂ addition increases the density, the electronic polarizability and, consequently, the refractive index. The increase of electronic polarizability and optical basicity suggest that TeO₂ addition increases the non-bridging oxygen (NBO) concentration. The increase of TeO₂ shifts the band edge to longer wavelength owing to increase in non-bridging oxygen ions, resulting in a linear decrease of optical energy gap. The addition of TeO₂ increases the temperature coefficient of the optical path length (dS/dT) in room temperature, which are comparable to phosphate and lower than Low Silica Calcium Alumino Silicate (LSCAS) glasses. The values of dS/dT present an increase as a function of temperature for all the samples measured. The results suggest that CBTx is a good candidate for rare-earth doping and several optical applications.     

Optical properties of an immobilized DNA monolayer from 255 to 700 nm

The real (n) and imaginary (k) refractive indices of an immobilized monolayer of 27 nucleotide (nt) single stranded DNA (ssDNA) and the corresponding double stranded DNA (dsDNA) are measured in the 255-700 nm range. Multiple techniques are used to obtain consistent estimation. The coverage is approximately 6.5% with an average interchain distance of tethered ssDNA molecules of approximately 11.8 nm, which is significantly larger than the "footprint" of the chain on the surface. The measured increase in n by approximately 5% between the ssDNA and the dsDNA is 20% smaller than the expected change due to doubling of the molecular weight. The change in k is not significant, indicating that the electron delocalization effect expected in dsDNA due to base pair stacking is not important at optical frequencies.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

Topological and Electron‐Transfer Properties of Yeast Cytochrome c Adsorbed on Bare Gold Electrodes

The redox metalloprotein yeast cytochrome c was directly self‐chemisorbed on “bare” gold electrodes through the free sulfur‐containing group Cys102. Topological, spectroscopic, and electron transfer properties of the immobilised molecules were investigated by in situ scanning probe microscopy and cyclic voltammetry. Atomic force and scanning tunnelling microscopy revealed individual protein molecules adsorbed on the gold substrate, with no evidence of aggregates. The adsorbed proteins appear to be firmly bound to gold and display dimensions in good agreement with crystallographic data. Cyclic voltammetric analysis showed that up to 84 % of the electrode surface is functionalised with electroactive proteins whose measured redox midpoint potential is in good agreement with the formal potential. Our results clearly indicate that this variant of cytochrome c is adsorbed on bare gold electrodes with preservation of morphological properties and redox functionality.     

The initial oxidation of magnesium: an in situ study with XPS,HERDA and ellipsometry

The initial oxidation of magnesium at oxygen partial pressures between 1.3 × 10^?8 and 1.3 × 10^?5 Pa and at temperatures ranging from 273 to 550 K has been investigated in situ with X‐ray photoelectron spectroscopy (XPS), ellipsometry and high resolution elastic recoil detection analysis (HERDA). Quantitative analysis of the XPS spectra showed a clear oxygen deficiency with respect to MgO for the initial oxide. HERDA measurements confirmed this relatively low oxygen content in the thin oxide layers formed. Ellipsometry measurements showed that the electronic structure of the initially formed oxide differs significantly from that of bulk MgO. The band gap values at room temperature for the oxide layers investigated are clearly smaller than the value for bulk MgO. Copyright © 2006 John Wiley & Sons, Ltd.     

Electrochemical properties of a gold electrode modified with a mixed monolayer

The electrochemical properties of a gold electrode modified with a mixed thiol monolayer containing both a polar and a non-polar head group have been investigated in aqueous Fe(CN)₆⁴⁻, flavin adenine dinucleotide (FAD) and ubiquinone-0 (2,3-dimethoxy-5-methyl-1,4-benzoquinone, UQ₀) solutions. The cyclic voltammetric current-potential (i-E) response of Fe(CN)₆⁴⁻ was found to be affected considerably by the polarity of the head group contained in the mixed monolayer assembly, as compared with those of FAD and UQ₀. It was also found that in the cases of UQ₀ and FAD the i-E responses for the modified electrode were affected by their own molecular size rather than the polarity of the mixed monolayer head group. Furthermore, compared with Fe(CN)₆⁴⁻ ion, these biologically related molecules are able to permeate readily into the well-organized and hydrophobic alkyl chains of the monolayer assembly. The voltammetric profile of UQ₀ was improved by the modification of aminoethanethiol, as compared with those of bare gold and the electrode modified with other polar thiols. Further, two different permeation paths of the electrode species into the mixed monolayer are suggested from the variation of the i-E response with the cycle of the potential scan.     

In situ transmission difference FTIR spectroscopic investigation on anodic oxidation of methanol in aqueous solution

In situ transmission difference FTIR spectroscopy method was introduced for studying the anodic oxidation of methanol in acid aqueous solution. A minigrid Pt optically transparent thin layer electrode was used as working electrode. This method has the ability to clarify the identity of species involved in the oxidation process both in solution and adsorbed at the surface of electrode. From the results of in situ transmission difference FTIR spectroscopy measurement it was found that HCHO, HCOOH, HCOOCH₃ and CH₂(OCH₃)₂ could be formed in the oxidation process of methanol. The final product was CO₂. The adsorbed poisonous intermediate CO was detected. It was formed at near 0.6 V and became significant at 0.9 V, where the oxidation current was inhibited. The in situ transmission difference FTIR spectroscopy method is a very convenient, relative simplicity and efficient method for investigating the electrochemical process, and could be as a good candidate for further application.     

Optical properties of gold nanorods: DDA simulations supported by experiments

Simulations of the absorption efficiency using the discrete dipole approximation (DDA) method and taking into account the real shape of gold nanorods are reported. A dominant surface plasma band corresponding to the longitudinal resonance is observed. Its maximum position lambda(max) shifts to the red as the aspect ratio increases. The transversal dipolar and multipolar mode wavelength positions are also discussed. These data are in good agreement with previous theoretical work based on classical electrostatic predictions and assuming that gold nanorods behave as ellipsoidal particles. From the experimental point of view, good agreement with the published data for gold nanorods is obtained.