A thermal and mechanical study under dynamical conditions of polypropylene/mica composites containing atactic polypropylene with succinil‐fluoresceine grafted groups as interfacial modifier from the matrix side

The dynamic thermal and mechanical behavior of Polypropylene/Mica composites—with improved properties induced by the presence of succinil‐fluoresceine groups onto atactic polypropylene with different grafting levels—is the subject of this article. A further correlation of these with the macroscopic mechanical performance of the composite materials is also discovered. The atactic polypropylenes containing succinil‐fluoresceine grafted groups were previously obtained in our laboratories by chemical modification of a byproduct of industrial polymerization reactors. The interfacial modifications induced by replacing a little amount of polymer matrix in the composite material by the grafted atactic polypropylene is clearly concluded either from a microscopic or a macroscopic point of view. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1564–1574, 2000     

Polypropylene/talc composites modified by a succinyl‐fluorescein grafted atactic polypropylene: A thermal and mechanical study under dynamic conditions

This article reports on the interfacial modifications induced by different amounts of a succinyl‐fluorescein grafted atactic polypropylene (a‐PP‐SF) as a truly interfacial agent in polypropylene/talc composite materials. The a‐PP‐SF used, which contains 4% grafts, was previously obtained in our laboratory by chemical modification of a byproduct from industrial polymerization reactors. Thermal and mechanical analyses of composites, performed under dynamic conditions, led to the correlation of parameters at the microscopic scale with others at the macroscopic scale. Thus, the interfacial effect caused by different amounts of a‐PP‐SF in the composite can be concluded by observations made at either scale. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1371–1382, 2002     

Succinyl fluorescein grafted atactic polypropylene as an interface modifier in polypropylene/talc composites: a thermal study under dynamic conditions

The subject of this work is the thermal behaviour of polypropylene/talc composites whose interface has been modified by atactic polypropylenes containing different numbers of succinyl fluorescein grafted groups. The interface modifiers used here were previously obtained in our laboratories by a two-step chemical modification of the melt of a by-product (atactic polypropylene) of industrial polymerisation reactors. The variations in interface activity caused by replacing a small amount of the polypropylene matrix in the composite by succinyl fluorescein grafted atactic polypropylene were clearly detected by differential scanning calorimetry as thermal responses. These studies show that interface agents are preferably located in the amorphous phase of the system. A correlation between the crystalline content of the polymer component and the degree of grafting of the interface agent is also established. Further, a relationship between the thermal behaviour and the mechanical properties of the system seems to emerge.     

Thermal studies on polypropylene/polyamide‐6 blends modified by succinic anhydride and succinyl fluorescein grafted polypropylenes

This study investigates the role played by two different interface agents on the basis of atactic polypropylene in the continuous/disperse phase polypropylene/polyamide‐6 (PP/PA6) system. The two agents used were obtained at the authors' laboratories from an atactic polypropylene byproduct derived from industrial polymerization reactors and consist of two grafted polymers containing either succinic anhydride (a‐PP‐SA) or both succinyl‐fluorescein and succinic anhydride grafted groups (a‐PP‐SF/SA). The role of these grafted polymers as compatibilizers in PP/PA6 polymer blends has been confirmed in previous investigations on the basis of their macroscopic behavior. This work investigates the thermal study of these blends where polypropylene acts as the polymer matrix and polyamide as the dispersed phase. Under isothermal conditions, thermal analysis agrees with the changes in the overall system behavior caused by the presence of the interface agents. These aspects were confirmed by polarized light microscopy that showed the morphology of the blends before and after modification with a‐PP‐SA or a‐PP‐SF/SA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1307–1315, 2002     

Effects of different compatibilizing agents on the interfacial adhesion properties of polypropylene/magnesium oxysulfate whisker composites

The effects of maleic anhydride-grafted polypropylene(PP-g-MAH) and maleic anhydride-grafted polyolefin elastomer(POE-g-MAH) on interfacial adhesion properties of the polypropylene/magnesium oxysulfate whiskers(PP/MOSw) composites were investigated via mechanical, thermal, ATR-FTIR and rheological tests. Although significant increases in yield strength and Young's modulus were observed in PP-g-MAH treated composites, a sharp decline in these properties was observed in POE-g-MAH treated composites. ATR-FTIR results indicated that esterification occurred between the hydroxyl groups of MOSw and the carbonyls of anhydrides of both compatibilizers but POE-g-MAH was still incompatible with the PP matrix, as verified by the presence of shoulder peaks in DTG curves and numerous voids in SEM micrographs. On the other hand, PP-g-MAH was highly compatible with the PP matrix, as evidenced by the peaks in DTG curves and vague interfaces with wrapped melts on the surface of MOSw. Rheological behaviors also confirmed that introducing PP-g-MAH resulted in a transition from liquid-like to solid-like, which was attributed to the stronger interfacial adhesion between MOSw and the PP matrix. POE-g-MAH treated composites, in contrast to PP-g-MAH, maintained liquidlike rheological behaviors as typical molten polymers. There is likely a MOSw network formed in the PP/15PP-gMAH/15 MOSw composite as suggested by the significant deviation of G′ versus G″ plots and the two crossover frequencies observed in plots of tan? versus frequency.     

纳米CaCO_3/相容剂/PP中的界面相互作用研究

采用不同相容剂(PP-g-MAH、POE-g-MAH和EVA-g-MAH)制备了不同界面相互作用的纳米CaCO3(CC)/相容剂/PP体系,研究了相容剂/PP和相容剂/CC界面相互作用对PP/CC的结晶形态、结晶行为、熔融特性和力学性能的影响.观察到PP/CC界面相互作用提高PP结晶温度和PP/CC的模量和冲击强度,但降低了屈服强度.相容剂/CC界面相互作用进一步提高了PP/CC的结晶温度.PP/相容剂界面相互作用取决于PP与相容剂相容性.PP/PP-g-MAH相容性高有利于提高PP/CC的异相成核作用和PP/CC屈服强度和模量,但降低冲击强度.PP/POE-g-MAH部分相容对相容剂/CC界面的异相成核作用、PP/CC屈服强度和模量影响不大,可明显提高冲击强度.但PP/EVA-g-MAH不相容导致PP/CC冲击强度明显降低.     

Influence of hyperbranched polymers on the interfacial tension of polypropylene/polyamide‐6 blends

The compatibilizing effect of polypropylene (PP) grafted with hyperbranched polymers (PP–HBP) has been investigated in PP/polyamide‐6 (PA‐6) blends. Because of its high reactivity and diffusitivity, PP–HBP has been shown to be a more effective compatibilizer in decreasing the interfacial tension than the commonly used maleic anhydride–grafted polypropylene (PP–MAH). This article describes the influence of PP–HBP and PP–MAH on the interfacial tension between PP and PA‐6, as measured by the deformed drop‐retraction method (DDRM). Overall, PP–HBP yielded lower interfacial tension values between PP and PA‐6, which resulted in a finer particle size of the secondary phase. The time dependence of the interfacial tension can be monitored by DDRM, enabling evaluation of the diffusitivity and reactivity of the compatibilizer. A model based on particle coarsening has been developed to describe the time dependence of the interfacial tension. This model showed that the diffusitivity and reactivity for PP–HBP was higher than that of PP–MAH. Therefore, PP–HBP has strong potential as a compatibilizer in diffusitivity‐dependant processes such as film coextrusion and fusion bonding. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2069–2077, 1999     

Rheological,morphological and mechanical properties of flax fiber polypropylene composites: influence of compatibilizers

In this work, the rheological, mechanical and morphological properties of flax fiber polypropylene composites were investigated. The effect of incorporating a polypropylene grafted acrylic acid or a polypropylene grafted maleic anhydride on these properties has been studied as well. According to scanning electron microscopic observations and tensile tests, the addition of a compatibilizer improved the interfacial adhesion between the flax fibers and the polymer matrix. The tensile modulus of composite containing 30 wt% flax fibers was improved by 200 % and the tensile strength improved by 60 % in comparison with the neat PP. Plasticizing effect of the compatibilizers as a result of their lower melt flow index was also shown to decrease the rheological properties of the composites, even though the effect was not pronounced on the mechanical properties.     

The role of interfacial compatibilization upon the microstructure and electrical conductivity threshold in polypropylene/expanded graphite nanocomposites

Attempts have been made to evaluate the effect of interface and degree of interfacial interaction upon electrical conductivity threshold in polypropylene/expanded graphite (PP/EG) nanocomposites, and dispersion state of graphite nanosheets. For this purpose, maleic anhydride grafted polypropylene (PPgMA) and maleic anhydride grafted EPDM (EPDMgMA) were used as compatibilizer. Nanocomposite samples containing 1–5 vol% of EG were prepared by melt mixing method using laboratory scale internal mixer. Characterization was carried out by using X‐ray diffraction (XRD), differential scanning calorimeter (DSC), thermo‐gravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscope (TEM), and rheo‐mechanical spectroscopy (RMS). The conductivity measurements were carried out by using four point probe method according to ASTM D991. Results showed that the conductivity threshold is controlled by the extent of interfacial interaction between PP and EG. So, better conductivity was obtained using PPgMA as compatibilizer which causes higher level of interaction between PP and EG, and therefore better dispersion of the EG nanolayers in the polymer matrix. On the other hand, high levels of compatibilizers, especially EPDMgMA, caused formation of separated aggregates of EG shelled with the compatibilizer, which results in the reduction of conductivity of the nanocomposites. This finding has been verified by SEM, RMS, and conductivity measurements. Effects of EG nanolayers on crystalline structure and thermal decomposition temperature of the nanocomposites have also been investigated by DSC and TGA, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of the composition of low-molecular products of the thermal oxidative destruction of atactic polypropylene by gas chromatography/mass spectrometry

The paper presents the results of studying the composition of low-molecular products of the thermal oxidative destruction of atactic polypropylene by gas chromatography/mass spectrometry. Special attention has been paid to the investigation of the mass spectra of compounds dominating in the composition of low-molecular products of the incomplete oxidative destruction of the original polymer, carried out for the synthesis of components for composite materials of the new generation. The most probable molecular structures of the studied compounds are determined on the basis of fragmentation patterns.     

Foaming behavior of polypropylene/polystyrene blends enhanced by improved interfacial compatibility

A series of polypropylene (PP)/polystyrene (PS) blends were prepared by solvent blending with PS‐grafted PP copolymers (PP‐g‐PS) having different PS graft chain length as compatibilizers. The interfacial compatibility was significantly improved with increasing PS graft chain length until the interface was saturated at PS graft chain length being 3.29 × 10³ g/mol. The blends were foamed by using pressure‐quenching process and supercritical CO₂ as the blowing agent. The cell preferentially formed at compatibilized interface because of low energy barrier for nucleation. Combining with the increased interfacial area, the compatibilized interface lead to the foams with increased cell density compared to the uncompatibilized one. The increase in interfacial compatibility also decreased the escape of gas, held more gas for cell growth, and facilitated the increase in expansion ratio of PP/PS blend foams. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1641–1651, 2008     

Thermoxidative degradation of polypropylene

The thermoxidative behavior of atactic and isotactic polypropylene under dynamical thermoxidative conditions has been studied. It has been established that, with the increase of the heating rate, the development of the oxidative processes are diminished and consequently a modification in the reaction mechanism takes place. One can notice at the same time that the oxidative processes are more intense in the case of the atactic polymer. The 5–15°C/min heating rates determine significant differences between the thermal behavior of the samples, permitting the elaboration of the standard curves useful in fast determination of the atactic content of the industrial products by routine analysis.     

Reactive blending of polypropylene/polyamide-6 in the presence of tailor-made succinic anhydride-terminated oligopropene compatibilizers

Various anhydride-terminated isotactic and atactic oligopropenes of number average molecular weights ranging between 1,000 and 10,000 g/mole, prepared by maleinating vinylidene-terminated propene oligomers obtained with isospecific and nonstereospecific metallocene-based Ziegler–Natta catalysts, have been evaluated as blend compatibilizers of polypropylene/polyamide-6 (70 vol%/30 vol%) blends to study the role of blend compatibilizer molecular architecture. When added during processing, as shown by IR spectroscopic analysis, the anhydride-terminated oligopropenes react with the amine-terminated polyamide-6 to yield polypropylene-block-polyamide-6 in situ. Such block copolymers are efficient dispersing agents. While the polyamide dispersion in the polypropylene continuous phase is not affected by blend compatibilizer stereoregularities, both stiffness and yield stress as well as notched Charpy impact strength increase with increasing stereoregularities and molecular weights. With oligopropene molecular weights exceeding 1,150 g/mole, the average size of the dispersed polyamide microphases correlates with the volume fraction of the oligopropene-block-polyamide-6 blend compatibilizer and the dicarboxylic acid anhydride/amine molar ratio.     

A novel technique for the interfacial characterisation of glass fibre–polypropylene systems

In the present work, a new technique was developed to determine the interfacial properties of two opaque glass fibre/polypropylene (GF/PP) systems via fragmentation tests on single filament model composites. Fragmentation tests usually require the fibre inside the composites to be completely aligned in the loading direction. Since PP matrices are non-transparent, it is not possible to guarantee a priori this condition. Hence, a novel technique was developed to determine the inclination of the filaments embedded in the composites. The fibre–polymer systems were also evaluated by comparing their interfacial properties with the overall mechanical properties determined on pultruded GF/PP composites. The present work shows that the knowledge of the interfacial properties is important, not only to compare alternative fibre/matrix systems, but also to assess whether the level of adhesion in these systems is adequate to fabricate composites with good mechanical properties.     

Transfer of load from matrix to fiber in self-reinforced polymer composites

The tensile properties of self-reinforced polypropylene composites, obtained by rapid extension of an isotactic polypropylene/atactic polypropylene melt, have been measured and correlated to morphological parameters derived from x-ray experiments. The longitudinal morphology of the core-fibrils is found to be independent of sample composition, while the lateral thickness of the fibers varies between 220 Å for iPP and 110 Å for the blend containing 50 wt.% aPP. Critical fiber lengths, as a function of sample composition and the elastic modulus and the yield stress of the fibers, could be determined. While the number of corefibrils increases with mass fraction of atactic polypropylene, the length of the lateral interface between fiber and matrix and the interface volume decreases with increasing aPP mass fraction. It is shown that this interface is responsible for the mechanical behavior of the composite by effecting the transfer of load from matrix to fiber.     

Non-isothermal crystallization and melting behavior of compatibilized polypropylene/recycled poly(ethylene terephthalate) blends

Binary blends of polypropylene (PP)/recycled poly(ethylene terephthalate) (r-PET), r-PET/maleic anhydride grafted PP (PP-g-MA), r-PET/glycidyl methacrylate grafted PP (PP-g-GMA), and ternary blends of PP/r-PET (80/20 w/w) compatibilized with various amounts (2-10 wt%) of PP-g-MA or PP-g-GMA were prepared on a twin-screw extruder. The non-isothermal crystallization and melting behavior, and the crystallization morphology were investigated by DSC and POM. The chemical reactions of r-PET with PP-g-MA and PP-g-GMA were characterized by FT-IR. DSC results show that the crystallization peak temperatures of r-PET and PP increased when blending them together, due to the heterogeneous nucleation effect on each other. The of r-PET increased with increasing the content of PP-g-MA while slightly influenced by the content of PP-g-GMA in the binary blends of r-PET with grafted PP, implying different reactivity of r-PET with PP-g-MA and PP-g-GMA. The of PP in the ternary blends retained or slightly decreased, dependent on the compatibilizers and their contents. The melting peak temperature of r-PET in PP/r-PET blends compatibilized by PP-g-MA was lower than that of compatibilized by PP-g-GMA, indicating that PP-g-MA had stronger reactivity towards r-PET compared to PP-g-GMA. The crystallization and melting behavior of blends was influenced by the pre-melting temperature, especially the melting behavior of r-PET in the blends. The crystallization behavior of PP in the blends was also evaluated by Mo’s method. POM confirmed the heterogeneous nucleation effect of r-PET on PP.     

Anomalous mixing behavior of polyisobutylene/polypropylene blends: molecular dynamics simulation study

The unusual mixing behavior of polyisobutylene (PIB) with head-to-head (hhPP) and head-to-tail polypropylene (PP) is studied using large-scale molecular dynamics (MD). The heats of mixing and Flory chi parameters were computed from MD simulations of both blends using a united atom model. The chi parameters from the simulations were estimated from the structure factors using the random phase approximation in analogy with neutron scattering (SANS) experiments. MD simulations for syndiotactic hhPP/PIB predicted a lower critical solution temperature with a chi parameter in very good agreement with SANS experiments on the atactic hhPP/PIB blend. MD simulations also predicted that the isotactic PP/PIB blend was immiscible at high molecular weight in qualitative agreement with cloud point measurements on atactic PP/PIB.     

Understanding and controlling the structure of polypropylene/layered silicate nanocomposites

The miscibility and structure in polypropylene/layered silicate nanocomposites is systematically investigated utilizing a maleic-anhydride grafted polypropylene with a low degree of functionalization acting as the compatibilizer. The morphology of the hybrids can be modified from phase separated to almost completely exfoliated in a controlled way by varying the ratio α of the compatibilizer to the organophilized clay; this ratio α is found to be the most important parameter in determining the final structure whereas exfoliated structures can be obtained for α values of 9 or higher. Furthermore, utilization of a “masterbatch” procedure can enhance the degree of exfoliation even for smaller values of α; in that case, polypropylene is essentially mixed with the already dispersed “hairy” platelets. Investigation of the thermal stability of the micro- and nanocomposites shows that high degree of exfoliation is vital in increasing the temperature that the polymer starts to degrade. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2683–2695, 2008     

Fracture studies of polypropylene/nanoclay composite. Part I: Effect of loading rates on essential work of fracture

Polypropylene (PP)/Montmorillonite (MMT) nanoclay based composite was prepared by melt compounding with maleic anhydride grafted polypropylene (MA-g-PP) as a compatibilizer in a twin-screw extruder, and the test specimens were injection molded. Mechanical properties such as tensile modulus, flexural modulus, yield strength and maximum percent strains were measured for pure PP and PP based nanocomposite to establish the effect of clay platelet reinforcement. The fracture properties were measured by using the essential work of fracture (EWF) method. PP/clay nanocomposite shows 25% improvement in specific EWF compared to pure PP. The variation of EWF parameters with loading rate is discussed, whilst the mechanisms of fracture are considered in a subsequent paper.     

Kinetics of styrene homogeneous polymerization to atactic polypropylene

The rate of polymerization of styrene initiated by hydroperoxidized atactic polypropylene in a homogeneous toluene solution has been measured at 60 and 70°C. The reaction is first-order with respect to styrene concentration and independent of the polymeric hydroperoxide concentration above 2 × 10^?5N hydroperoxide. The individual rate constants, length and frequency of the grafted polystyrene chains along the polypropylene backbone have been calculated and their significance discussed. The initiation rate constant compares closely with values reported for the analogous tert-butyl hydroperoxide-initiated polymerization. The rate constant for the chain transfer termination elementary step at 70°C., however, is 18 times the value reported for the tert-butyl hydroperoxide-initiated polymerization of styrene. This high constant accounts for the relatively low rates of polymerization observed and high termination rates. Chain deactivation is presumably accelerated by increased collisions between growing styrene chains and inactive propylene hydroperoxide and polystyrene molecules. Distribution of polystyrene grafts on polypropylene is estimated from knowledge of effects of styrene concentration, polymeric hydroperoxide concentration, and temperature upon the rate of polymerization.