淀粉/丙烯酸反相乳液体系的稳定性研究

以丙烯酸(AA)单体的水溶液为水相,液体石蜡为油相,失水山梨醇三油酸酯(Span 85)和辛基苯基聚氧乙烯醚(Opan 10)为复合乳化剂,合成了淀粉/丙烯酸反相乳液;考察了乳化剂亲水亲油平衡值(HLB值)、油水比、乳化剂用量、单体浓度、温度对乳液稳定性和类型的影响.结果表明,合成淀粉/丙烯酸稳定反相乳液体系的适宜条件...     

Oil Base Mud. Part I: Synthesis of Some Local Surfactants Used as Primary Emulsifiers for Oil Base Mud and Evaluation of Their Rheology Properties

Six oil soluble nonionic surfactants with different HLBs have been prepared. Their HLBs situate between 3.9 and 6.7. Transesterification was carried out for glycerol and triethanol amine with oleic acid at different moles to obtain six emusilifiers. They named glycerol momooleate (I), glycerol diooleate (II), glycerol trioleate (III), triethanol amine mono-, di- and tri-oleate (IV), (V,) and (VI). The chemical structure was confirmed using; the elemental analysis, FTIR and ¹HNMR. They were evaluated as a primary emulsifiers (PE) for thdrilling fluids (oil base mud) comparing with a currently used primary emulsifier (Fc). The water in oil base mud (w/o emulsions) was prepared. The concentration of emulsifiers and their HLB exhibited interesting rheology properties including shear-thinning behavior, yield value, viscoelastic effects, thixtropy, gel strength, and filtration loss. The rheology properties of such emulsions strongly depended on the average size distribution of the dispersed droplets that could be varied both with the bulk concentration and HLB value of the emulsifiers. The interfacial and surface properties of these emulsifiers suggest that the droplet size of the dispersed phase and bulk concentration are strongly related to the HLB value of emulsifiers. The w/o emulsion (mud formulation) stability is sensitive to the droplet size of the dispersed phase and HLB value of the used emulsifier. The results were discussed on the light the chemical structure of the primary emulsifiers and the emulsion ingredients.     

相互缠结的聚甲基丙烯酸甲酯/磺化聚苯乙烯复合水基微乳液Ⅰ:制备及影响因素

将聚苯乙烯制成磺化聚苯乙烯离聚体 (SPS) ,利用相反转技术 ,将磺化聚苯乙烯离聚体加水制成具有纳米级的稳定的水基微乳液。利用SPS纳米微粒核内部作为反应场所 ,用引发剂引发亲油性单体甲基丙烯酸甲酯聚合 ,制备具有相互缠结结构的PMMA/SPS复合水基微乳液。研究了引发剂的用量、MMA的用量、溶剂极性对聚合反应及复合水基微乳液的影响     

磺化聚苯乙烯／聚吡咯复合膜

磺化聚苯乙烯（ＳＰＳ）／聚吡咯（ＰＰｙ）复合膜是通过毗咯单体在ＳＰＳ基体中原位聚合方法制成的．用ＦＴＩＲ研究ＳＰＳ／ＰＰｙ复合膜分子间的相互作用，特别是ＳＰＳ中ＳＯ３阴离子在１２００ｃｍ－１不对称伸缩振动港带的分裂，说明了聚吡咯是以阳离子的形式作用于ＳＰＳ中ＳＯ３阴离子上，产生强的离子－离子相互作用．同时还研究了在复合过程中，引起ＳＰＳ基体的微区结构与性能的变化．ＳＰＳ由于吡咯单体的胀入和聚合，导致了ＳＰＳ微相分离，复合膜在动态力学性能测试中出现了两个Ｔｇ转变，分别在１２４和１４５℃．     

种子乳液聚合法制备多孔乳胶粒

用批量乳液聚合法制备了苯乙烯（Ｓｔ）———甲基丙烯酸甲酯（ＭＭＡ）二元共聚种子乳液Ｓ１以及Ｓｔ ＭＭＡ 丙烯酸（ＡＡ）三元共聚种子乳液Ｓ２,通过连续法无皂种子乳液聚合合成了一系列不同ＡＡ或ＭＡＡ（甲基丙烯酸）含量的Ｓｔ、ＭＭＡ三元共聚乳液．将所得复合胶乳进行碱／酸分步处理,得到具有多孔结构的乳胶粒．用透射电镜对胶粒形态进行了表征,考察了不饱和酸种类和用量、碱处理初始ｐＨ值及溶胀剂对胶粒成孔的影响．     

Some Cutting Oil Formulations Based on Local Prepared Emulsifiers Part I: Preparation of Some Emulsifiers Based on Local Raw Materials to Stabilize Cutting Oil Emulsions

The first main target of this work is to synthesis some emulsifiers from local raw materials used for cutting oil formulations. Seventeen emulsifiers (15 nonionic and 2 anionic) were prepared from locally available materials such as linear alkyl benzene sulfonic acid (LABSA), glycerol, polyethylene glycol, and maleic anhydride. Their chemical structures were confirmed using FTIR. The surface tension for the emulsifiers was measured at 25°C, and the surface and thermodynamic properties were calculated based on the surface tension parameters. The formulations of cutting oil fluids were prepared using these emulsifiers. The second target is to investigate the stability of soluble oil blends and emulsion stability of soluble oil in water. The results are discussed in the light of surface‐active properties and chemical structure of emulsifiers.     

离聚体水基微乳液化的研究——聚苯乙烯离聚体微乳化过程相反转的表征

以乙酰磺酸为磺化剂制备磺化度为３～１５ｍｏｌ％的磺化聚苯乙烯（ＳＰＳ）并中和成盐．在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液．用乳化过程中体系电导率和粘度的变化表征了乳化相反转过程．研究了溶剂的极性和离子含量对聚苯乙烯离聚体溶液可乳化性和乳化过程及乳液稳定性的影响．     

Preparation and properties of some water-soluble,comb-shaped,amphiphilic polymers

Water-soluble comb-shaped polymers were prepared through grafting of poly(ethylene glycol) monomethyl ethers (MPEG) onto acrylic and methacrylic ester copolymers by transesterification reactions. The grafting was alkali-catalyzed, and performed in refluxing toluene solution or in melt at 155°C. The grafting efficiency was found to be on the order of 1 graft/10 monomer units. Epoxy groups in glycidyl methacrylate copolymers were also utilized for grafting. The crude graft copolymers were purified through chromatography and characterized by NMR and IR spectroscopy. Polymers prepared from MPEG 2000 were crystalline with melting points 10–15°C lower than the MPEG used. All polymers were shown to be surface active with CMC on the order of 1.5 g/L, and surface tensions of 38–45 dyn/cm. When used as emulsifiers the graft copolymers containing bulky lipophilic ester groups (2-ethylhexyl t-butyl) gave oil-in-water (o/w) and water-in-oil (w/o) emulsions from xylene/water with higher stability than those containing straight chain ester groups (methyl nbutyl n-docecyl). The most stable emulsions were obtained by dissolving the polymers in the organic phase.     

催化剂对乳液模板法制备碳材料形貌的影响

以液体石蜡为油相,间苯二酚和甲醛的水溶液为水相,吐温80和司班80为乳化剂,获得油/水(O/W)型乳状液.将该乳状液聚合、碳化去除模板后制得了碳材料,研究了不同催化剂对所得碳材料形貌的影响.结果表明:选择NaOH为催化剂时,制得的碳材料是一种具有孔壁和孔洞的多孔碳泡沫,典型样品的孔径约为1-2μm;当氨水为催化剂时,所得碳材料是由微球或者相互缠绕的蠕虫状粒子组成的块体材料,这些微球或粒子的直径主要集中在1-2μm,与NaOH为催化剂时所得碳泡沫的孔径尺寸相当.研究发现,氨水的加入使得乳液体系发生了相转化,由原来的O/W型乳液逐渐转变为W/O型高内相乳液.从分子间氢键出发,应用内聚能理论探讨了催化剂导致的乳液相变以及不同形貌碳材料的形成过程.     

Effects of compositions on the stability of polyols-in-oil-in-water (P/O/W) multiple emulsions

Polyols-in-oil-in-water (P/O/W) multiple emulsions were successfully prepared by using polyols as inner aqueous phase to avoid instabilities caused by water. The influence of polyols, oils and emulsifiers on the morphology and stability of P/O/W multiple emulsions were studied and the stability mechanisms of this new kind of multiple emulsions were also explored. Glycerol that has the worst solubility in oil phase contributed to the formation of stable inner droplets which agree with the Ostwald Ripening theory. Mineral oil worked well with the system proving that oils possessing similar solubility parameters with the hydrophobic group of emulsifiers benefited for system stability. Several typical surfactants had been investigated in this article, and it turned out that emulsifiers Cetyl PEG/PPG-10/1 Dimethicone and the block copolymer Poloxamer 407 were suitable for the P/O/W system. The stability of the system affected by different compositions was evaluated based on microscopic observation and rheological measurements. The novel multiple emulsions will provide enlightening recommendations for future investigations and applications in cosmetic, food and pharmaceuticals, including drug delivery and the encapsulation of hydrophilic actives and actives that are soluble in polyols.     

碳纳米管复合聚丙烯酸钠的制备及吸水性能

以过硫酸铵(APS)为引发剂,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,采用水溶液聚合法制备了碳纳米管/聚丙烯酸钠高吸水树脂。系统考察了碳纳米管质量分数、引发剂、交联剂和聚合温度对树脂吸水性能的影响。结果表明,以单体丙烯酸质量为基准,当交联剂,引发剂和碳纳米管质量分数分别为0.04%、0.3%和0.3%,聚合温度75℃时,所合成树脂的吸水性能最佳。添加碳纳米管后树脂表面粗糙和形成孔结构导致了其吸水性能的变化,使得碳纳米管/聚丙烯酸钠的吸水量和吸水速率明显提高,其吸去离子水和生理盐水能力分别达到1423和104g/g。该树脂重复吸水5次后,其吸水能力为1081.5g/g,达到最大吸水倍数的76.0%。     

Thermosensitive pickering emulsion stabilized by poly(N-isopropylacrylamide)-carrying particles

Poly(N-isopropylacrylamide) (PNIPAM)-carrying particles were characterized as thermosensitive Pickering emulsifiers. Emulsions were prepared from various oils, such as heptane, hexadecane, trichloroethylene, and toluene, with PNIPAM-carrying particles. PNIPAM-carrying particles preferentially formed oil-in-water (O/W)-type emulsions with a variety of oils. All the emulsions stabilized by PNIPAM-carrying particles were stable for more than 3 months as long as they were stored at room temperature. However, when the emulsions were heated from room temperature to 40 degrees C, at which point the PNIPAM layer caused a coil-to-globule transition, phase separation occurred. Thus, by using thermosensitive PNIPAM-carrying particles as emulsifiers, the stability of the Pickering emulsions could be controlled by a slight change in temperature.     

Synthesis of alkali-soluble copolymer (butyl acrylate/acrylic acid) and its application in leather finishing agent

Alkali-soluble copolymer (butyl acrylate/acrylic acid) was synthesized via solution polymerization and used as the emulsifier to prepare acrylic resin for leather finishing agent. The influence of the synthetic conditions, such as the contents of acrylic acid and the initiator types on the properties of P(BA/AA) was investigated in detail. Fourier Transform Infrared Spectrometer (FTIR) indicated that the polymerization reaction of P(BA/AA) was complete without “CC” absorption peak. Differential Scanning Calorimeters (DSC) analysis confirmed that the glass transition temperature (T_g) of P(BA/AA) was −44 °C, Transmission Electron microscope (TEM) indicated that the copolymer latex particles dispersed evenly and were less than 100 nm. Moreover, in contrast to acrylic resin prepared with sodium dodecylsulfate (SDS) and alkylphenol ethoxylates (OP-10) as the emulsifiers, the applied properties of light leather finished by acrylic resin in use of P(BA/AA) as the emulsifier were measured: The air permeability increased by 18.5% as well as the water-resistance by 28.08% and the wet rub fastness by half class, respectively.     

引入离子基团改善聚苯乙烯和热致液晶聚合物的相容性 Ⅰ热性能和形态

ＤＳＣ和ＳＥＭ研究结果表明聚苯乙烯（ＰＳ）与一种热致液晶聚合物（ＬＣＰ）（ＰＨＢ／ＰＥＴ（６０／４０）共聚酯）完全不相容．共混体系具有与组分无关的Ｔｇ，并且表现出明显的两相结构．将ＰＳ进行化学改性（引入磺酸基团）制备成磺化聚苯乙烯（ＳＰＳ），随中和盐离子的变化有：酸式、Ｌｉ、Ｎａ、Ｚｎ和Ｍｎ盐五种形式．用ＤＳＣ和ＳＥＭ对ＬＣＰ与ＳＰＳ共混物的热性能和形态进行了分析和表征．共混体系有一个与组成相关，且明显低于纯ＳＰＳ的Ｔｇ．这表明了ＰＳ与ＬＣＰ的相容性因为磺酸基团的引入而得到了改善．同时用Ｆｏｘ方程计算了ＬＣＰ的Ｔｇ．当ＳＰＳ含量较低时（不大于５０％）在各个共混体系中，所估算的ＬＣＰ的Ｔｇ相互吻合．表明共混体系满足Ｆｏｘ方程的前提条件，即ＬＣＰ与ＳＰＳ形成相容体系．当ＳＰＳ含量较低时（２５％），ＬＣＰ／ＳＰＳ的共混物为较均一体系，断面光滑；而ＳＰＳ含量较高时，在脆断面可以观察到纳米级的颗粒．电子能谱分析证明了这些颗粒是ＳＰＳ负离子的聚集体．     

Synthesis and Evaluation of Novel Polymeric Phosphate Surfactants for Oil-Based Muds

(Mono, di) alkyl, aryl phosphate-ethoxylate were prepared from coal-tar-phenol. The synthesized ethoxylates were evaluated as water-in-oil emulsifiers in oil-base mud, one type of the drilling fluids used to drill for oil and gas wells by the rotary method. This study presents a new trend of disposal and reuse of cao-tar phenol, a byproduct that causes environmental problems. The newly prepared compounds were confirmed by FTIR and molecular weight determination. Surface properties of the newly prepared ethoxylates were studied via surface tension, emulsion stability, cloud points, critical micelle concentration, and hydrophile-lipophile balance. Also, rheological properties, filtration, and electrical stability were studied to the oil-base mud formulated with the newly prepared emulsifiers compared to the reference sample (commercial emulsifier).     

X-ray and neutron reflectometry study of glow-discharge plasma polymer films

Radio-frequency glow-discharge plasma polymer thin films of allylamine (AA) and hexamethyldisiloxane (HMDSO) were prepared on silicon wafers and analyzed by a combination of X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), X-ray reflectometry (XRR), and neutron reflectometry (NR). AFM and XRR measurements revealed uniform, smooth, defect-free films of 20-30 nm thickness. XPS measurements gave compositional data on all elements in the films with the exception of hydrogen. In combination with XRR and NR, the film composition and mass densities (1.46 and 1.09 g cm(-)(3) for AA and HMDSO, respectively) were estimated. Further NR measurements were conducted with the AA and HMDSO films in contact with water at neutral pH. Three different H(2)O/D(2)O mixtures were used to vary the contrast between the aqueous phase and the polymer. The amount of water penetrating the film, as well as the number of labile protons present, was determined. The AA film in contact with water was found to swell by approximately 5%, contain approximately 3% water, and have approximately 24% labile protons. The HDMSO polymer was found to have approximately 6% labile protons, no thickness increase when in contact with water, and essentially no solvent penetration into the film. The difference in the degree of proton exchange within the films was attributed to the substantially different surface and bulk chemistries of the two films.     

Incomplete phase inversion W/O/W emulsion and formation mechanism from an interfacial perspective

Water-in-oil-in-water (W/O/W) double emulsion can be prepared by incomplete phase inversion method using both medium chain triglycerides (MCT) and isopropyl myristate (IPM) as oil phase, Span 85-Tween 80 (HLB values of 2.5-3.0) as mixed emulsifiers. The preparation method was simple, and the final double emulsions were proved of good microstructure and particle size distribution. Owning to the addition of Tween 80 to Span 85, interfacial tension, interfacial viscosity and modulus decreased, which contributed to the phase inversion. Furthermore, formation of reverse micelles under high-speed dispersion may be a hypothesis to explain the incomplete phase inversion phenomenon.     

淀粉微球形成过程的介观模拟及实验

以环己烷为油相、淀粉乳液为水相、Span60和Tween60为乳化剂,对淀粉微球的形成过程进行了耗散粒子动力学(DPD)模拟及实验研究.模拟结果表明,淀粉微球的形成过程存在四个阶段,即淀粉与乳化剂分子无规则分散阶段、小聚集体形成阶段、球状聚集体形成阶段和稳定平衡阶段,并且发现油水比是影响聚集体是否能形成球状的关键因素.油水比小于7的条件下,油水两相分离较难,水相呈现片状、十字型状、柱状及椭球状等形状;当油水比增加到8,水相能形成微球且微球粒径随油水比增加而减小.同时实验结果表明,油水比为8时,微球粘连,几乎看不清球状形貌,油水比为10～20时,微球的粒径随油水比的增大而减小.实验结果很好地吻合了模拟结果.     

Effect of preparation conditions on properties of polylactide and polystyrene and their composite microparticles made by emulsion solvent evaporation method

In this study, polylactide and polystyrene microparticles have been prepared by emulsion solvent evaporation method. Effects of polymer nature, stirring speed, emulsifier, and concentration of the components on the size, size distribution and morphology of polymeric microparticles have been investigated. 11-Acryloyl-aminoundecanoic acid and its polymer poly(11-acryloyl-aminoundecanoic acid) were tested for comparison with traditional emulsifiers such as sodium dodecylsulfate. Interfacial tension measurement was applied to compare these emulsifiers. Dynamic light scattering and scanning electron microscopy were used to analyze microparticles. Polylactide/polystyrene composite microparticles have been prepared as well; their surface morphology has been studied.     

Properties of various phosphatidylcholines as emulsifiers or dispersing agents in microparticle preparations for drug carriers

We investigated characteristics of various phosphatidylcholines (PCs) used as dispersing agents and emulsifiers. Six PCs with different lengths of acyl hydrocarbon chains and different degrees of unsaturated acyl hydrocarbon chains were selected to examine influences of a lipophillic part of phosphatidylcholines in emulsion and dispersion systems. Vesicles and oil-in-water emulsions were prepared by sonication under several ambient temperature conditions. Mean diameters of vesicles and oil droplets in emulsions were measured by a submicron particle sizer. In vesicles that are generated by hydration of the PCs and have a bilayer form, particle size was influenced by length and degree of unsaturation of acyl hydrocarbon chains of a PC. PCs with shorter acyl hydrocarbon chains or unsaturated bonds are considered more potent dispersing agents. Preparation temperature of the PC is also a factor affecting potency of dispersion. In O/W emulsions in which PCs were absorbed at water-oil interfaces and which have a single layer form or liquid-crystal layer form, particle size was also influenced by length and degree of unsaturation of acyl hydrocarbon chains of a PC. PCs with shorter and saturated acyl hydrocarbon chains are considered more potent emulsifiers. Unsaturation of acyl hydrocarbon chains weaken the ability of emulsification due to vulnerable double bonds. For stable emulsions, it is considered beneficial for PCs to form small oil droplets and lamellae liquid-crystal phase. From this perspective, saturated PCs with short hydrocarbon chains, i.e., DLPC and DMPC, may have advantages in preparing a stable emulsion not only by giving a smaller droplet size but also by forming lamellae liquid-crystal phase. When considering characteristics of PCs as emulsifiers, their characteristics as dispersing agents is also useful information.