Effect of LiClO4 on the radical polymerization of Di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The effect of LiClO₄ on the polymerization of di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (DMEI) with dimethyl 2,2′-azobisisobutyrate (MAIB) was investigated in methyl ethyl ketone (MEK) kinetically and by ESR. The polymerization rate (R_p) at 50°C, where the concentrations of DMEI and MAIB were 1.00 and 5.00 × 10⁻² mol/L, increased with increasing [LiClO₄]. Marked acceleration was observed at higher [LiClO₄]s than 1.0 mol/L. The molecular weight of resulting polymer (ca. 10,000) was relatively insensitive to [LiClO₄], indicating occurrence of chain transfer. IR analysis of mixtures of LiClO₄/DMEI and LiClO₄/poly(DMEI) indicated complexation of LiClO₄ with DMEI and its polymer. The rate constants of propagation (k_p) and termination (k_t) were determined by ESR. k_p (1.7–10.5 L/mol s at 50°C) increased with [LiClO₄]. k_t (5.2–1.0 × 10⁴ L/mol s at 50°C) showed remarkable decrease at higher [LiClO₄]s than 1.0 mol/L. R_p of polymerization of equimolar complex of LiClO₄/DMEI with MAIB at 50°C in MEK was expressed by R_p = k[MAIB]^0.5[DMEI]^2.4. k_p increased and k_t decreased with [DMEI]. The activation energies of overall polymerization, propagation and termination were estimated to be 34.5, 8.0, and 59.4 kJ/mol. Copolymerization of DMEI with styrene was also profoundly affected by the presence of LiClO₄. Such large effects of LiClO₄ on the homo- and copolymerization of DMEI are explicable in term of association of LiClO₄-complexed DMEI monomers. © 1997 John Wiley & Sons, Inc.     

Kinetic and EPR studies on radical polymerization. Radical polymerization of di-2[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The polymerization of di-2[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (1) with dimethyl 2,2-azobisisobutyrate (2) was studied, in benzene, kinetically and spectroscopically with the electron paramagnetic resonance (EPR) method. The polymerization rate (R _p) at 50°C is given by the equation:R _p=k[2]^0.48 [1]^2.4. The overall activation energy of polymerization was calculated to be 34 kJ·mol^–1. From an EPR study, the polymerization system was found to involve EPR-observable propagating polymer radicals of 1 under the actual polymerization conditions. Using the polymer radical concentration, the rate constants of propagation (k _p) and termination (k _t) were determined. With increasing monomer concentration,k _p(1.54.3 L·mol^–1·s^–1 at 50°C) increases andk _t (1.0·10⁴4.2·10⁴ L·mol^–1·s^–1 at 50°C) decreases, which seems responsible for the high dependence ofR _p on the monomer concentration. The activation energies of propagation and termination were calculated to be 11 kJ·mol^–1 and 84 kJ·mol^–1, respectively. For the copolymerization of 1(M ₁) and styrene (M ₂) at 50°C in benzene the following copolymerization parameters were found:r ₁=0.2,r ₂=0.53, Q₁=0.57, ande ₁=+0.7.     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Living anionic homo- and block copolymerization of 2-(tert-butylamino)ethyl methacrylate

Anionic polymerization of 2-(tert-butylamino)ethyl methacrylate (tBAEMA), which bears an unprotected secondary amine moiety, has been investigated in THF at −78°C. The presence of lithium chloride has been shown to be desirable to afford narrow molecular weight distribution as well as a good agreement between theoretical and observed molecular weight. The living character of the polymerization has also been demonstrated, and the synthesis of block copolymers carried out successfully. They have been analyzed by SEC by adding a mixture of secondary and tertiary amines to the eluent (THF) so as to avoid any polymer adsorption during elution. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2035–2040, 1997     

Radical polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate

The polymerization of benzyl N-(2,6-dimethylphenyl)itaconamate (BDMPI) with benzoyl peroxide (BPO) in N,N-dimethylformamide (DMF) was studied kinetically by ESR. The polymerization rate (R_p) at 70°C was given by R_p = k[BPO]^0.78[BDMPI]^1.1. The overall activation energy of polymerization was determined to be 83.7 kJ/mol. The number-average molecular weight of poly(BDMPI) was in the range of 1500–2000 by gel permeation chromatography. From the ESR study, the polymerization system was found to involve ESR-observable propagating radicals of BDMPI under practical polymerization conditions. Using the polymer radical concentration by ESR, the rate constants of propagation (k_p) and termination (k_t) were determined in the temperature range of 50–70°C. The k_p value seemed dependent on the chain-length of propagating radical. The analysis of polymers by the MALDI-TOF mass spectrometry suggested that most of the resulting polymers contain the dimethylamino terminal group. The copolymerization of BDMPI (M₁) and styrene (M₂) at 50°C in DMF gave the following copolymerization parameters; r₁ = 0.49, r₂ = 0.26, Q₁ = 1.2, and e₁ = +0.63. The thermal behavior of poly(BDMPI) was examined by dynamic thermogravimetry and differential scanning calorimetry. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1891–1900, 1997     

Highly diastereoselective 7-endo radical cyclization of ethyl α-methylene-γ-(bromomethyl)dimethylsiloxycarboxylates

The 7-endo radical cyclization of (bromomethyl)dimethylsilyl ethers derived from ethyl γ-hydroxy-α-methylenecarboxylates bearing a bulky γ-substituent such as isopropyl, cyclohexyl, and tert-butyl groups in tetrahydrofuran gave preferentially cyclic silyl ethers bearing the ethoxycarbonyl group anti to the γ-substituents in high yields. Treatment of the cyclic silyl ethers with silica gel gave acyclic ethyl γ-hydroxy-α-[2-(hydroxydimethylsilyl)ethyl]carboxylates. The reduction of the cyclization products with DIBAL followed by Tamao oxidation gave the corresponding acyclic triols.     

Evident solvent effect on propagation reactions during radical copolymerization of maleimide and alkene

The radical copolymerization of N-(2,6-dimethylphenyl)maleimide (DMPhMI) and 2,4,4-trimethylpentene (TP) was investigated in several solvents at 60°C. The copolymerization rate and the molecular weight of the resulting copolymers were dependent on the kind of solvent used. It was also revealed that the monomer reactivity ratios depended on the solvent; r₁ = 0.086 and r₂ = 0 in chloroform and r₁ = 0.25 and r₂ = 0 in benzene, where DMPhMI and TP are M₁ and M₂, respectively. The propagation rate constants were determined for the homopolymerization and copolymerization in chloroform and benzene using electron spin resonance spectroscopy. The homo- and crosspropagation rate constants (k₁₁ and k₁₂, respectively) were revealed to depend on the solvent: k₁₁ is 20 and 37 L/mol·s and k₁₂ is 230 and 150 L/mol·s in chloroform and in benzene, respectively. The interaction between the maleimide moiety and the solvent molecules was discussed based on the acceptivity of the solvents. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1515–1525, 1997     

Solvent extraction of univalent and bivalent metal picrates with 1,2-bis[2-(2-methoxyethoxy)ethoxy] benzene (noncyclic crown ether) into CHCl3

The overall extraction equilibrium constants, K_ex, of 1:1:m complexes of 1,2-bis[2-(2-methoxyethoxy)ethoxyjbenzene (AC · B18C6) with uni- and bivalent metal picrates, MA _m were determined at 25°C between CHCl₃ and water, and thereby the ion-pair complex-formation constants,K _MLA,o, of AC · B18C6 with the univalent metal picrates in CHCl₃ were calculated. The AC · B18C6 is an open-chain analog of benzo-18-crown-6 (B18C6). The equilibrium constants of AC · B18C6 were compared with those of B18C6. K_ex sequences of AC · B18C6 for uni- and bivalent metals are Tl⁺ > K⁺ > Rb⁺ > Cs⁺ > Na⁺ > Li⁺ and Pb²⁺ > Ba²⁺ > Sr²⁺, respectively. The same extraction-selectivity was observed for B18C6, but the extractability of AC · B18C6 for the same cation is much lower than that of B18C6; the extraction selectivity of AC · B18C6 for alkali metals is lower than that of B18C6. TheK _MLA,o sequence of AC · B18C6 is K⁺ > Rb⁺ > Tl⁺ > Cs⁺ Na⁺, which is consistent with that of B18C6. ButK _MLA,o of AC · B18C6 is much smaller than the correspondingK _MLA,o of B18C6; the selectivity of AC · B18C6 among alkali metal picrates in CHCl₃ is lower than that of BI8C6. This reflects the difference in the structures between AC · B18C6 (acyclic and flexible) and B18C6 (cyclic and rigid).     

Improving resins for solid phase synthesis: incorporation of 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene

The preparation, characterisation and application of a series of non-grafted polystyrene (PS) resins containing a styrenic methoxypoly(ethylene glycol) (MPEG) derivative is presented. These novel PS-MPEG resins were designed to balance swelling and solvation with improved handling. The monomer, 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene, contained an inert phenyl ether linkage designed to provide broad chemical compatibility and stability, yet imparting all the favourable properties of the PEG group into the new resin, whilst maintaining a high loading capacity. The synthetic performance of the new resins compared very favourably to those of TentaGel™, ArgoGel™ and aminomethyl PS.     

Soluble hyperbranched polymer through initiator-fragment incorporation radical copolymerization of ethylene glycol dimethacrylate and α-ethyl β-N-(α-methylbenzyl) itaconamate in benzene

The copolymerizations of ethylene glycol dimethacrylate (EGDM) with α-ethyl β-N-(α^′-methylbenzyl) itaconamates (RS- and S-EMBIs) derived from (RS)- and (S)-α-methylbenzylamines were conducted at 70 and 80 °C in benzene using dimethyl 2,2^′-azobisisobutyrate (MAIB) of high concentration as initiator. The copolymerization of EGBM (0.20 mol/l) and RS-EMBI (0.50 mol/l) with MAIB (0.50 mol/l) proceeded homogeneously without any gelation in benzene to give benzene-soluble copolymer in a yield of 55% based on the total weight of EGDM, RS-EMBI and MAIB. The copolymer was soluble in acetone, ethyl acetate, chloroform, tetrahydrofuran (THF), toluene, N,N-dimethylformamide and insoluble in n-hexane, methanol, dimethyl sulfoxide, and water. The copolymerization system involved ESR-observable propagating radicals derived from EGDM and RS-EMBI, of which the total concentration increased with time in spite of the homogeneous system. The copolymer consisted of EGDM unit (25 mol%), RS-EMBI unit (45 mol%), and methoxycarbonylpropyl group as MAIB-fragment (30 mol%). Such a large number of initiator fragments were incorporated into the copolymer as terminal groups through initiation and primary radical termination, leading to a conclusion that the copolymer was of hyperbranched structure (initiator-fragment incorporation radical copolymerization). Radius of gyration (R_g) and M_w of the copolymer by light scattering measurements in THF were 17.8 nm and 7.7 × 10⁵, respectively. Comparison of these values with those (R_g=27.6 nm and M_w=2.9×10⁵) of linear polystyrene also supported the above conclusion. Reflecting the compact hyperbranched structure, the intrinsic viscosity ([η]) of the copolymer was very low, [η]=0.075 dl/g at 25 °C in THF. The individual copolymer molecules were observed as a nanoparticle by TEM. The copolymerization of EGDM and S-EMBI with MAIB in benzene also gave similar results.     

Micellization and applications of narrow-distribution poly[2-(dimethylamino)ethyl methacrylate]

Oxyanion-initiated polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA), initiated by potassium benzyl alcoholate (BzOK), produced a number of well-defined, water-soluble benzyloxy end-capped homopolymers of various molecular weights. The structure of these homopolymers was confirmed by FTIR and ¹H NMR. The molecular weights of the polymers were estimated by comparing the ¹H NMR peak integrals for phenyl protons of the benzyloxy group with those of the dimethylamino protons of the monomeric unit. GPC analysis showed that these homopolymers possess a narrow molecular weight distribution ( ) in the range of 1.15–1.28. Under acidic or neutral conditions, the polymers exhibit the behavior of polymeric surfactants bearing protonized tertiary amines in their pendants, with critical micelle concentration (CMC) between 0.5 to 1 g/L and surface tension dropping below 40 mN/m. It was also found that the lower critical solution temperature (LCST) of the polymeric surfactants (as determined by UV-visible spectroscopy) varied with properties such as molecular weight, concentration, and pH in aqueous media. The polymeric surfactants showed excellent pH-response and emulsifier properties when used in the emulsion polymerization of styrene.     

Synthesis and characterization of perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl end-capped styrene oligomers

Styrene oligomers with perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl end-groups have been synthesized with moderate to high yields (52-97%) via radical oligomerization by using perfluoro[2-(2-fluorosulfonyl)ethoxy]propyonyl peroxide (PPP) at various reactant ratios of styrene over PPP (80, 160, 240, 300, 360 and 420) and different temperatures (33, 37 and 42 °C), and characterized by FTIR, ¹H NMR and ¹⁹F NMR. The molecular weight of the oligomers measured by gel permeation chromatography (GPC) is dependent on the reactant ratio and reaction temperature. The polydispersity of the oligomers varies from 1.99 to 3.30. The oligomer obtained at the reactant ratio of 300 has the maximum yield (97%) and much broader polydispersity (3.30). The contact angles of water, θ_H2O, on the oligomer films are much bigger than that of polystyrene (PS). The glass transition temperature of the oligomers, T_g, increases with the increase of molecular weight and is lower than that of the parent polymer.     

Kinetic and ESR studies on the radical polymerization of α‐n‐(α′‐methylbenzyl) β‐ethyl itaconamates derived from racemic and (s)‐α‐methylbenzylamines

The polymerization of α‐N‐(α′‐methylbenzyl) β‐ethyl itaconamate derived from racemic α‐methylbenzylamine (RS‐MBEI) by initiation with dimethyl 2,2′‐azobisisobutyrate (MAIB) was studied in methanol kinetically and with ESR spectroscopy. The overall activation energy of polymerization was calculated to be 47 kJ/mol, a very low value. The polymerization rate (R_p ) at 60 °C was expressed by R_p = k[MAIB]^0.5±0.05[RS‐MBEI]^2.9±0.1. The rate constants of propagation (k_p ) and termination (k_t ) were determined by ESR. k_p was very low, ranging from 0.3 to 0.8 L/mol s, and increased with the monomer concentration, whereas k_t (4–17 × l0⁴ L/mol s) decreased with the monomer concentration. Such behaviors of k_p and k_t were responsible for the high dependence of R_p on the monomer concentration. R_p depended considerably on the solvent used. S‐MBEI, derived from (S)‐α‐methylbenzylamine, showed somewhat lower homopolymerizability than RS‐MBEI. The k_p value of RS‐MBEI at 60 °C in benzene was 1.5 times that of S‐MBEI. This was explicable in terms of the different molecular associations of RS‐MBEI and S‐MBEI, as analyzed by ¹H NMR. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4137–4146, 2000     

Radical polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate,a dimer of methyl acrylate,as a polymerizable α-substituted acrylate

Polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate (MMEA), which is known as a dimer of methyl acrylate, were studied in relation to steric hindrance-assisted polymerization. The propagating polymer radical from MMEA was detected as a five-line spectrum and quantified by ESR spectroscopy during the bulk polymerization at 40–80°C. The absolute rate constants of propagation and termination (κ_p and κ_t) for MMEA at 60°C (κ_p = 19 L/mol s and κ_t = 5.1 × 10⁵ L/mol s) were evaluated using the concentration of the propagating radical at the steady state. The balance of the propagation and termination rates allows polymer formation from MMEA. The polymerization rate of MMEA at 60°C was less than that of MMA by a factor of about 4 at a constant monomer concentration. Although no influence of ceiling temperature was observed at a temperature ranging from 40 to 70°C, addition-fragmentation in competition with propagation reduced the molecular weight of the polymer. The content of the unsaturated end group was estimated to be 0.1% at 60°C to the total amount of the monomer units consisting of the main chain. MMEA exhibited reactivities almost similar to those of MMA toward polymer radicals. It is concluded that MMEA is one of the polymerizable acrylates bearing a substituted alkyl group as an α-substituent. Characterization of poly(MMEA) was also carried out. © 1996 John Wiley & Sons, Inc.     

Reaction kinetics and gel effect on the polymerization of 2‐ethoxyethyl methacrylate and 2(2‐ethoxyethoxy) ethyl methacrylate

Polymerization kinetics at several temperatures of 2‐ethoxyethyl methacrylate (EEMA) and 2(2‐ethoxyethoxy) ethyl methacrylate (DEMA) in bulk and in dioxane solutions are described. The gel effect was never detected at monomer concentrations equal to or lower than 1 mol L^?1, although in the bulk polymerization both monomers display the gel effect at very low conversions. Because of the influence of the efficiency factor f on the polymerization rate, a theoretical kinetic interpretation of the changes in f with monomer and initiator concentrations and kinetic parameters was performed to achieve a better understanding of the mechanisms involved in radical polymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3987–4001, 2002     

Kinetic and ESR studies on radical polymerization behavior of N‐(2‐phenylethoxycarbonyl)methacrylamide

Polymerization of N‐(2‐phenylethoxycarbonyl)methacrylamide (PECMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was investigated in tetrahydrofuran (THF) kinetically and by means of electron spin resonance (ESR). The overall activation energy of the polymerization was calculated to be 58 kJ/mol. The initial polymerization rate (R_p) is expressed by R_p = k[MAIB]^0.3[PECMA]^2.3 at 60 °C. Such unusual kinetics may be ascribable to primary radical termination and to acceleration of propagation due to monomer association. Propagating poly(PECMA) radical was observed as a 13‐line spectrum by ESR under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p, 4.7–10.5 L/mol s) and termination (k_t, 4.6 × 10⁴ L/ml s) at 60 °C are much lower than those of methacrylamide and methacrylate esters. The Arrhenius plots of k_p and k_t gave activation energies of propagation (24 kJ/mol) and termination (25 kJ/mol). The copolymerizations of PECMA with styrene (St) and acrylonitrile were examined at 60 °C in THF. Copolymerization parameters obtained for the PECMA (M₁) − St(M₂) system are as follows: r₁ = 0.58, r₂ = 0.60, Q₁ = 0.73, and e₁ = +0.22. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4264–4271, 2000     

2'-O-[2-[2-(N,N-dimethylamino)ethoxy]ethyl] modified oligonucleotides: symbiosis of charge interaction factors and stereoelectronic effects

[structure: see text] Oligonucleotides with a novel, 2'-O-[2-[2-(N,N-dimethylamino)ethoxy]ethyl] (2'-O-DMAEOE) modification have been synthesized. This modification, a cationic analogue of the 2'-O-(2-methoxyethyl) (2'-O-MOE) modification, exhibits high binding affinity to target RNA (but not to DNA) and exceptional resistance to nuclease degradation. Analysis of the crystal structure of a self-complementary oligonucleotide containing a single 2'-O-DMAEOE modification explains the importance of charge factors and gauche effects on the observed antisense properties. 2'-O-DMAEOE modified oligonucleotides are ideal candidates for antisense drugs.     

Propene homo- and copolymerization using homogeneous and supported metallocene catalysts based on Me2Si(2-Me-Benz[e]lnd)2ZrCl2

The isoselective propene polymerization using the supported catalyst SiO₂/MAO/Me₂Si(2-Me-Benz[e]Ind)₂ZrCl₂/AlR₃ was investigated and compared with propene polymerization using the corresponding homogeneous catalyst system. The influence of propene concentration, polymerization medium, temperature, comonomer, and external aluminium alkyls on polymerization kinetics and polypropene properties such as molecular mass, stereo- and regioselectivity, morphology, and bulk density was studied. © 1997 John Wiley & Sons, Inc.     

聚[2-(4-苯基偶氮苯氧基)乙基丙烯酸酯]的合成及光响应性能研究

从4-羟基偶氮苯出发,依次与2-氯乙醇、丙烯酰氯反应,合成了2-(4-苯基偶氮苯氧基)乙基丙烯酸酯(PAPEA)。接着以PAPEA为单体,二硫代苯甲酸异丁腈酯(CPDB)为链转移剂,偶氮二异丁腈(AIBN)为引发剂,利用可逆加成-断裂链转移(RAFT)聚合法合成了聚[2-(4-苯基偶氮苯氧基)乙基丙烯酸酯](PPAPEA)均聚物,同时考察了反应时间、引发剂和链转移剂浓度等因素对聚合反应的影响。利用FT-IR、1H-NMR和GPC等对单体和聚合物的结构进行了表征,并利用UV对聚合物的光响应性能进行了测试。结果表明,PAPEA的聚合反应动力学曲线呈良好的线性关系,分子量分布较窄(小于1.3);均聚物在紫外光照下的异构化速率随分子量的增大而减缓,而其在自然光下的回复速率变化不大。