A novel strategy for synthesis of amphiphilic π-shaped copolymers by RAFT polymerization

The amphiphilic π-shaped copolymers with narrow molecular weight distribution (M_w/M_n = 1.04-1.09) based on polystyrene (PSt) and poly(ethylene glycol) have been synthesized successfully. The reversible addition-fragmentation transfer (RAFT) polymerization of St in the presence of dibenzyl trithiocarbonate and N,N′-azobis(isobutyronitrile) (AIBN) yielded macro RAFT agent PSt-SC(S)S-PSt, subsequent reaction with excess maleic anhydride (MAh) at 80 °C in tetrahydrofuran afforded the PSt-MAh-SC(S)S-MAh-PSt. It was used as RAFT agent in the RAFT polymerization of St, and finally the amphiphilic π-shaped copolymers were obtained by the reaction of MAh with hydroxyl-terminated poly(ethylene glycol methyl ether) at 90 °C for 48 h. Their structures were confirmed by FT-IR and ¹H NMR spectra, and their molecular weight and molecular weight distribution were measured by gel permeation chromatography.     

Quasiliving Carbocationic Polymerization. IX. Forced Ideal Copolymerization of Styrene Derivatives

Forced ideal carbocationic copolymerization of α-methylstyrene (αMeSt) with p-tert-butylstyrene (ptBuSt) and (αMeSt) with styrene (St) has been achieved by continuous monomer feed addition to a cumyl chloride/BCl₃ charge at -50°C by keeping the feeding rate of the monomer mixtures equal to the overall rate of copolymerization, The composition of the copolymers was identical to the composition of the monomer feeds over the entire concentration range. A quantitative expression has been derived to show that under forced ideal copolymerization conditions the composition of the copolymer can be controlled by the composition of the feed. Further, conditions have been found for forced ideal quasiliving copolymerizations, i.e., the number-average molecular weight of the copolymers increased almost linearly with the cumulative weight of consumed monomers by the use of suitably slow, continuous feed addition in the presence of relatively nonpolar solvent mixtures (60/40 v/v n-hexane + methylene chloride). In polar solvent (methylene chloride) the molecular weight increase was less pronounced due to chain transfer to monomer involving indane-skeleton formation; however, with charges containing large amounts of ptBuSt the molecular weight increase was surprisingly strong. Interestingly, ptBuSt does not homopolymerize in 60/40 v/v n-hexane/methylene chloride but it readily copolymerizes with αMeSt. This observation was explained by examining the relative rates of terminations of the cationic species involved. Conditions have been found for the pronounced quasiliving polymerization of St. In forced ideal quasiliving copolymerizations neither the molecular weights of αMeSt/ptBuSt or αMeSt/St copolymers nor the initiating efficiencies of the initiating systems used show a depression. The microstructure of representative αMeSt/ptBuSt copolymers obtained under forced ideal quasiliving conditions has been analyzed by ¹³C-NMR spectroscopy. According to these studies, true copolymers have formed and resonance peaks for various triads have been deduced.     

Controlled/living copolymerization of styrene and acrylamide in DMF with Fe/TMEDA complex as catalyst

In this work, Fe(0)‐mediated single electron‐living radical copolymerization of styrene (St) and acrylamide (AM) was investigated at ambient temperature in N,N‐dimethylformamide using carbon tetrachloride as initiator and tetramethylethylenediamine as ligand. Kinetic studies showed that the copolymerization followed the first‐order kinetics model. The resulting copolymers of St and AM possessed predetermined molecular weights and narrow molecular weight distribution, which agreed with the character of controlled/living polymerization. On the basis of Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (NMR), the monomer reactivity ratios were calculated. The amount of ligand played an important role in copolymerization. The obtained polymer was characterized by FTIR, ¹H NMR, ¹³C NMR, and gel permeation chromatography. The living characteristics were demonstrated by chain extension experiment. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2919–2924     

Effect of zinc salts on the spontaneous copolymerization of 4-vinylpyridine with various electron-rich vinyl monomers

The spontaneous copolymerization of 4-vinylpyridine (4-VP) complexed with three different zinc salts (chloride, acetate, and triflate) with various electron-rich vinyl monomers (p-methoxystyrene, MeOSt; p-methylstyrene, MeSt; α-methylstyrene, α-MeSt; p-tert-butylstyrene, BuSt; styrene, St) was investigated in methanol at 75°C. Increasing the zinc salt concentration or the nucleophilicity of the electron-rich monomer increased the copolymer yields. All obtained copolymers are characterized by high molecular weight (10⁵) and broad molecular weight distribution. Both ¹H-NMR and elemental analyses confirmed the almost 1 : 1 copolymer structure. Changing the anion of the zinc salt does not have a considerable effect either on the copolymerization rate or on the molecular weight. The proposed mechanism exhibits the formation of a σ-bond between the β-carbons of the two donor–acceptor monomers. This creates the 1,4-tetramethylene biradical intermediate which can initiate the copolymerization reaction. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2787–2792, 1997     

可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

CONTROLLED RADICAL COPOLYMERIZATION OF STYRENE AND MALEIC ANHYDRIDE UNDER GAMMA RADIATION IN THE PRESENCE OF BENZYL DITHIOBENZOATE

The copolymerization of styrene (St) with maleic anhydride (MAh) under gamma radiation at room temperature inthe presence of benzyl dithiobenzoate (BDTB) was found to display "living" nature evidenced by constant concentration ofchain radicals during the copolymerization, linear evolution of molecular weights with conversion and narrow molecularweight distribution (M_w/M_n = 1.23-1.35). The compositional analysis and the sequence structural information of thecopolymers obtained from DEPT (Distortionless Enhancement by Polarization Transfer) experiments demonstrate that thecopolymers obtained also possess strictly alternating structure.     

通过RAFT聚合制备SiO2/接枝共聚物纳米杂化粒子

以二氧化硅(SiO2)纳米粒子表面键接的二硫代苯甲酸酯作为可逆加成-断裂-链转移(RAFT)聚合反应的链转移剂, 在室温下引发苯乙烯和马来酸酐进行表面RAFT交替共聚反应, 制得了SiO2/苯乙烯-alt-马来酸酐杂化材料. 通过聚氧化乙烯(PEO)的羟基与马来酸酐的酯化反应, 将PEO接枝到SiO2纳米粒子的表面, 增加了硅粒子的生物相容性. 用FTIR, TGA和TEM对杂化材料的结构、组成和形貌进行了表征.     

Amphiphilic Biodegradable Poly(ϵ-caprolactone)-Poly(ethylene glycol) – Poly(ϵ-caprolactone) Triblock Copolymer Synthesis by Maghnite-H+ as a Green Catalyst

Amphiphilic biodegradable (PCL-PEG-PCL) triblock copolymers have been successfully prepared by the ring opening polymerization of ?-caprolactone (CL) in the presence of poly(ethylene glycol) (PEG) at 80°C employing Maghnite-H⁺ a non-toxic Montmorillonite clay as catalyst. Maghnite-H⁺ reacts as a solid source of protons to induce ?-caprolactone polymerization. The triblock architecture, molecular weight and thermal properties of the copolymers were characterized by NMR spectra, GPC and DSC analyses. The effect of Maghnite-H⁺ proportion and PEGs on the rate of copolymerization and on average molecular weight of resulting copolymers was studied. A cationic mechanism for the copolymerization reaction was proposed.     

Preparation of Quaternary Amphiphilic Block Copolymer PMA-b-P (NVP/MAH/St) and Its Application in Surface Modification of Aluminum Nitride Powders

Poly(methyl acrylate)-b-poly(N-vinyl pyrrolidone/maleic anhydride/styrene) (PMA-b-P (NVP/MAH/St)) quaternary amphiphilic block copolymer prepared by reversible addition-fragmentation chain transfer (RAFT) was used to improve the anti-hydrolysis and dispersion properties of aluminum nitride (AIN) powders that were modified by copolymers. Its structure was characterized by Fourier transform infrared spectroscopy (FT-IR) and Hydrogen nuclear magnetic spectroscopy (¹H-NMR). The results demonstrate that the molecular weight distribution of the quaternary amphiphilic block copolymers is 1.35–1.60, which is characteristic of controlled molecular weight and narrow molecular weight distribution. Through charge transfer complexes, NVP/MAH/St produces a regular alternating arrangement structure. After being treated with micro-crosslinking, AlN powder modified by copolymer PMA-b-P(NVP/MAH/St) exhibits outstanding resistance to hydrolysis and can be stabilized in hot water at 50 °C for more than 14 h, and the agglomeration of powder particles was improved remarkably.     

Anionic polymerization of lactones initiated by alkali graphitides. IV. Copolymerization of ε-caprolactone initiated by KC24

The copolymerization of ε-caprolactone (ε-CL) with octamethylcyclotetrasiloxane (D₄) and styrene (St) under the action of the second-stage potassium graphitide KC₂₄ was investigated. The copolymerizations were carried out in bulk or in xylene at 20°C. The content of the block copolymer ε-CL/D₄ in the polymerization mixture was 60–95%, the molecular weight ranging between 150,000 and 300,000. The data for the copolymers' composition obtained by ¹H-NMR and GPC showed 14–20% of D₄-units in the copolymer. The amount of the block copolymer ε-CL/St in the polymerization products was 0–87%, and the molecular weights in the case of copolymer formation were between 100,000 and 500,000. The content of St-units in the copolymers was from 10 to 75% as shown by GPC and ¹H-NMR. The mechanism of action of the initiator is discussed.     

Synthesis,characterization, and crosslinking of novel stars comprising eight poly(isobutylene‐azeotropic‐styrene) copolymer arms with allyl or hydroxyl termini. I. Living azeotropic copolymerization of isobutylene and styrene

The overall objective of this research is the creation of novel star polymers consisting of well‐defined stable cores out of which radiate multiple poly(isobutylene‐co‐styrene) [P(IB‐co‐St)] arms whose glass‐transition temperature (T_g) can be controlled over a wide range (?73 to +100 °C) and whose arm termini are fitted with multipurpose (e.g., crosslinkable) functionalities. The first article of this series relates the synthesis and characterization of azeotropic IB/St copolymers [P(IB‐aze‐St)], which are to be subsequently used as end‐functional arms of the target stars. The P(IB‐aze‐St)s are models for statistical IB/St copolymers. The azeotropic composition is 21/79 (mol/mol) IB/St, and NMR, Fourier transform infrared, and gel permeation chromatography techniques demonstrate copolymer compositional homogeneity over the 12–96% conversion range. Conditions were developed for living azeotropic IB/St copolymerization. The livingness of the azeotropic copolymerization was proven by kinetic investigations. P(IB‐aze‐St)s with number‐average molecular weights of up to 24,000 g/mol and polydispersity indices (weight‐average molecular weight/number‐average molecular weight) less than 1.5 were prepared. The copolymerization reactivity ratios were determined: r_IB = 3.41 ± 0.23 and r_St = 1.40 ± 0.26. The effect of the P(IB‐aze‐St) molecular weight on T_g was studied by DSC. T_g increases linearly with the number‐average molecular weight and reaches a plateau at 62 °C at 24,000 g/mol. The heat stability of P(IB‐aze‐St) was investigated by thermogravimetric analysis, and a 5% weight loss was found at 250 °C in air. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1515–1524, 2001     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of biodegradable copolymers with low‐toxicity zirconium compounds. V. Multiblock and random copolymers of L‐lactide with trimethylene carbonate obtained in copolymerizations initiated with zirconium(IV) acetylacetonate

Using zirconium(IV) acetylacetonate as an initiator of lactide/trimethylene carbonate copolymerization allowed us to obtain high‐molecular‐weight copolymers with high efficiency. The reactivity ratios of the comonomers were 13.0 for lactide and 0.53 for trimethylene carbonate. Despite the large differences between the values of the reactivity ratios, copolymers with randomized chain structures were obtained. This phenomenon occurred as a result of an intensive intermolecular transesterification process proceeding along with the reaction of copolymer chain growth and modifying its final structure. Conducting the copolymerization at the relatively low temperature of about 110 °C, which minimized the influence of intermolecular transesterification, made it possible to obtain semicrystalline copolymers with multiblock structures. Increasing the temperature of copolymerization up to 180 °C was associated with strong intensification of the transesterification reactions. At this temperature, amorphous copolymers were obtained with identical compositions but highly randomized chain structures. An analysis of the chain microstructures of the obtained copolymers, determining the average length of the blocks, the intermolecular transesterification ratio, and the degree of chain randomization, was conducted by means of NMR spectroscopy. For this purpose, very specific signal assignment in the carbonyl and methylene carbon regions of the ¹³C NMR spectra to appropriate comonomer sequences of polymeric chains was performed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3184–3201, 2006     

Organostibine mediated controlled/living random copolymerization of styrene and methyl methacrylate

The first example of organostibine mediated controlled/living random copolymerization of styrene (St) and methyl methacrylate (MMA) was achieved by heating a solution of St/MMA/organostibine mediator at 100 °C or St/MMA/organostibine mediator/AIBN with various monomer feed ratios at 60 °C. The addition of AIBN significantly decreased the reaction temperature and enhanced the rate of copolymerization. The structure of poly(St-co-MMA) was verified by ¹H NMR. The reactivity ratios at 60 °C were determined by the extended Kelen-Tüd?s method to be γ_St = 0.40 and γ_MMA = 0.44. The ln([M]₀/[M]) increased linearly with increasing reaction time. The number-average molecular weights of poly(St-co-MMA) increased linearly with conversion. Poly(St-co-MMA) with expected number-average molecular weight and low polydispersity index was formed. The living characteristic was further confirmed by chain-extension of poly(St-co-MMA) to form poly(St-co-MMA)-b-PMMA.     

甲基丙烯酸丁酯和苯乙烯的原子转移自由基共聚

研究了甲基丙烯酸丁酯（ＢＭＡ）和苯乙烯（Ｓ）这两种不同极性单体的原子转移自由基嵌段共聚和无规共聚,得到了实测分子量与理论分子量相近,分子量分布较窄的嵌段共聚物和无规共聚物．聚合过程中分子量和单体转化率成比例增加,多分散性指数变化不大．用１Ｈ ＮＭＲ法测定共聚组成,Ｋｅｌｅｎ Ｔｕｄｏｓ法计算竞聚率．得到ｒＳｔ＝０９１,ｒＢＭＡ＝０３２．     

Cationic copolymerization of ε‐caprolactone and L,L‐lactide by an activated monomer mechanism

The cationic homopolymerization and copolymerization of L,L ‐lactide and ε‐caprolactone in the presence of alcohol have been studied. The rate of homopolymerization of ε‐caprolactone is slightly higher than that of L,L ‐lactide. In the copolymerization, the reverse order of reactivities has been observed, and L,L ‐lactide is preferentially incorporated into the copolymer. Both the homopolymerization and copolymerization proceed by an activated monomer mechanism, and the molecular weights and dispersities are controlled {number‐average degree of polymerization = ([M]₀ ? [M]_t)/[I]₀, where [M]₀ is the initial monomer concentration, [M]_t is the monomer concentration at time t, and [I]₀ is the initial initiator concentration; weight‐average molecular weight/number‐average molecular weight ～1.1–1.3}. An analysis of ¹³C NMR spectra of the copolymers indicates that transesterification is slow in comparison with propagation, and the microstructure of the copolymers is governed by the relative reactivity of the comonomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7071–7081, 2006     

Polymerization and copolymerization of trioxane: Factors influencing molecular weight and end groups

In bulk polymerization and copolymerization of trioxane with ethylene oxide, it has been shown that p-chlorophenyldiazonium hexafluorophosphate is a superior catalyst as compared to boron trifluoride dibutyl etherate (BF₃ · Bu₂O). Polymers and copolymers of significantly higher molecular weight have been obtained. The higher molecular weight has been attributed primarily to less inherent chain transfer during propagation, which in turn can be attributed to the superior gegenion PF₆^?. The polymerization proceeds via a clear period followed by sudden solidification. Faster polymerization and higher molecular weight polymers have been observed for homopolymerization than for copolymerization. The polymer yield obtained after solidification is determined by both rate of polymerization and rate of crystallization of polymers. These rates, in turn, are dependent on the catalyst concentration. The molecular weight is determined both by polymer yield and extent of inherent chain transfer. In the range of monomer to catalyst mole ration [M]/[C] = (0.5–20) × 10⁴ investigated, it has been found that in the higher range, the polymer yield is independent of the catalyst concentration and the extent of inherent chain transfer is inversely proportional to the half power of catalyst concentration: [M]/[C] = (0.5–8) × 10⁴ for homopolymerization and (0.5–3) × 10⁴ for copolymerization with 4.2 mole % ethylene oxide. In the lower range, the yield decreases with catalyst concentration and the extent of inherent chain transfer is inversely proportional to higher power of catalyst concentration. The dependence of molecular weight of polymers on catalyst concentration has been shown to be a complex one. The molecular weight goes through a maximum as the catalyst concentration is decreased. The maximum molecular weights have been obtained at [M]/[C] ≈ 8 × 10⁴ for homopolymerization and ～3 × 10⁴ for copolymerization with 4.2 mole % ethylene oxide. Prior to reaching maximum the molecular weight is inversely proportional to the half power of catalyst concentration indicating it is primarily controlled by inherent chain transfer. Upon further decrease of catalyst, molecular weight decreases as a result of both a decrease in polymer yield and an increase in inherent chain transfer. In copolymerization of trioxane and ethylene oxide, it has been ascertained that methylene chloride exhibits a favorable solvating effect. Although higher inherent chain transfer takes place in copolymerization than in homopolymerization, the extent of chain transfer is independent of ethylene oxide concentration. The difference in polymer yield and molecular weight a t different ethylene oxide concentrations is attributed primarily to the difference in k_p/k_t ratio. It also has been demonstrated that end capping of polymer chains can be accomplished by the use of a chain transfer agent—methylal.     

A novel catalytic system—NdCl3 · HMPA/AI(i‐6u)3 for copolymerization of isoprene and styrene

Co polymerization of styrene (St) and isoprene (IP) was carried out with a catalyst system composed of anhydrous lanthanide chloride hexamethyl phosphor amide complex (LnC1₃‐HMPA) and aluminum organic compound (AOC). Among the catalysts examined, catalyst NdC1₃*HMPA/Al(i‐Bu)₃ showed a high activity in the copolymerization under certain conditions giving copolymers (5%‐158 St content) with high cis‐1, 4 microstructure in IP Units (>95%). The effects of HMPA/Nd molar ratio, Al/Nd molar ratio, monomer/Nd molar ratio, St feed ratio, and the reaction time on copolymerization were examined with this catalytic system. The obtained copolymers were characterized by ¹H and ¹³C NMR spectroscopies and gel‐permeation chromatography (GPC).     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000     

Random copolymerization of acetylenic monomers and 1,3-dienes

Copolymerization of acetylenic monomers and 1,3-dienes was carried out by use of nickel naphthenate–diethylaluminum chloride catalyst. The molecular weight of the copolymers is rather low, and the copolymers are suitable as prepared for direct use as coating vehicles. In the system of acetylene and 1,3-dienes, the order of the copolymerization rate decreases in the following order: butadiene > isoprene > 2,3-dimethylbutadiene > chloroprene. 1,3-Dienes substituted at 1-and/or 4-position were scarcely copolymerized with acetylene. Methylacetylene and dienes tend to form cyclized copolymers. In the system of phenylacetylene and dienes, polyphenylacetylene was the main product; the copolymer was not obtained. The copolymer composition and the sequence distribution of linear copolymers were evaluated by ¹H-NMR spectra. Comparison of dyad fractions of copolymers evaluated from NMR spectra and those calculated by assuming random polymerization indicated that the copolymers of acetylene and dienes were random, and that the copolymers of methylacetylene and dienes were somewhat blocky. The coordination of monomers on the catalyst may play an important role in controlling the copolymerizability.