Neopenthyl glycol containing poly(propylene azelate)s: Synthesis and thermal properties

Poly(neopenthyl azelate) (PNAz) and poly(propylene/neopenthyl azelate) random copolymers (PPAz-PNAz) (NAz unit content from 5 to 20 mol%) were synthesized and characterized in terms of chemical structure and molecular weight. Afterwards, the polyesters were examined by TGA, DSC and X-ray diffractometry. Good thermal stability was found for each sample. The thermal analysis showed that the T_m of the copolymers decreased with the increment in NAz unit content, differently from T_g, which on the contrary increased. X-ray diffraction measurements allowed the identification of the PPAz crystalline structure in all the copolymers. Multiple endotherms were shown in the PPAz-PNAz samples, due to melting and recrystallization processes, similarly to PPAz. The of the copolymers was derived from the application of the Hoffman-Weeks’ method. Baur’s equation described well the T_m-composition data. The isothermal crystallization kinetics were analyzed according to Avrami’s treatment. The introduction of NAz units decreased the crystallization rate compared to pure PPAz. Values of the Avrami’s exponent n close to 3 were obtained in all cases, regardless of T_c, in agreement with a crystallization process originating from predeterminated nuclei and characterized by a three dimensional spherulitic growth.     

Miscibility and Crystallization in Binary Crystalline Blends of Poly(butylene terephthalate) with Poly(butylene terephthalate-e-caprolactone)

Poly(butylene terephthalate)/poly(butylene terephthalate-e-caprolactone) is a new A/AxB1-x binary crystalline blend with intra-molecular repulsion interaction. Using the mean-field binary interaction model, the value of interaction parameter between the butylene terephthalate and caprolactone structural unit was first reported to be 0.305. This blend exhibited different crystallization behavior from a typical homopolymer/copolymer blend, which was carefully investigated by di?erential scanning calorimetry. It was found that poly(butylene terephthalate-e-caprolactone) copolymers have a great effect on the pure poly(butylene terephthalate) chain mobility and poly(butylene terephthalate) crystalline lattice packing. In the meantime, the crystallization of butylene terephthalate segments in copolymers was restricted by the previously formed poly(butylene terephthalate) crystallites. The two constituents for blending can not form a co-crystal in the range of composition even if they have the same butylene terephthalate unit. It can be concluded that longersegments in a copolymer would be beneficial for the formation of a co-crystal in blends.     

Wide‐angle X‐ray diffraction and differential scanning calorimetry study of the crystallization of poly(ethylene naphthalate), poly(butylene naphthalate), and their copolymers

The crystallization behavior of a series of poly(ethylene‐co‐butylene naphthalate) (PEBN) random copolymers was studied. Wide‐angle X‐ray diffraction (WAXD) patterns showed that the crystallization of these copolymers could occur over the entire range of compositions. This resulted in the formation of poly(ethylene naphthalate) or poly(butylene naphthalate) crystals, depending on the composition of the copolymers. Sharp diffraction peaks were observed, except for 50/50 PEBN. Eutectic behavior was also observed. This showed isodimorphic cocrystallization of the PEBN copolymers. The variation of the enthalpy of fusion of the copolymers with the composition was estimated. The isothermal and nonisothermal crystallization kinetics were studied. The crystallization rates were found to decrease as the comonomer unit content increased. The tensile properties were also measured and were found to decrease as the butylene naphthalate content of the copolymers increased. For initially amorphous specimens, orientation was proved by WAXD patterns after drawing, but no crystalline reflections were observed. However, the fast crystallization of drawn specimens occurred when they were heated above the glass‐transition temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 843–860, 2004     

Synthesis and Properties of Poly(butylene carbonate-co-spirocyclic carbonate)

Poly(butylene carbonateXPBC) has significantly promising applications as a degradable material in the field of polymers, while its poor thermal performance and low crystallization rate are its main defects. To overcome these shortcomings, a series of poly(butylene carbonate-co-spirocyclic carbonateXPBSC) copolymers were synthesized from diphenyl carbonate, 1,4-butanediol and spiroglycol via two-step polycondensation reactions, using magnesium oxide as a catalyst. Differential scanning calorimetry(DSC) results indicated that the glass transition temperature(Tg) values of PBSC copolymers were enhanced from -19℃ to 56℃ with rising the spiroacetal moiety content. Thermogravimetric analysis(TGA) results showed that the resulting PBSCs have a higher thermal stability than that of poly(butylene carbonate). Wide angle X-ray diflraction(WXRD) patterns were characterized to investigate the crystallization behaviour of PBSCs. Tensile testing demonstrated that copolymerization of spiroacetal moieties into PBC chains imparted PBSC with favourable mechanical performance. Typically, PBSC 30 had a tensile modulus of (1735±430) MPa, a tensile strength of (42±5) MPa and an elongation of 504%±36%.     

Application of SSA thermal fractionation and X‐ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate‐ran‐butylene azelate) random copolymers

Poly(butylene succinate‐ran‐butylene azelate) random copolyesters were thermally fractionated by successive self‐nucleation and annealing (SSA). The samples before and after SSA were analyzed by differential scanning calorimetry (DSC) and X‐ray diffraction (WAXS and SAXS). WAXS results indicate that a small degree of comonomer inclusion is present in the crystalline phases that are formed in the copolymers depending on composition: a PBS‐like unit cell or/and a PBAz‐like unit cell, thus confirming the isodimorphic behavior of the samples. SSA on the other hand demonstrated that the degree of comonomer exclusion during crystallization is far larger than comonomer inclusion, as judged by the increase in fractionation degree with compositions leading to the pseudo‐eutectic point. Furthermore, WAXS, SAXS, and SSA results show that the isodimorphic behavior is not highly dependent on kinetic factors, as the degree of comonomer inclusion or exclusion in the samples was not significantly altered by SSA thermal fractionation, a thermal treatment that promotes annealing and molecular segregation of defects to the amorphous regions of the material. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2346–2358     

Influence of transesterification reactions on the miscibility and thermal properties of poly(butylene/diethylene succinate) copolymers

Poly(butylene/diethylene succinate) block copolymers (PBSPDGS), prepared by reactive blending of the parent homopolymers (PBS and PDGS) in the presence of Ti(OBu)₄, were analyzed by ¹H-NMR, TGA and DSC, in order to investigate the effects of the transesterification reactions on the molecular structure and thermal properties. ¹H-NMR analysis evidenced the formation of copolymers whose degree of randomness increases with the mixing time. The thermal analysis of the melt-quenched samples showed that the melting peak, due to the crystalline phase of PBS, tends to disappear with increasing mixing time and therefore with decreasing the block length in the copolymers. As concern miscibility, a single homogeneous amorphous phase always occurred, independently on block length. Nevertheless, a phase separation, due to the tendency of the PBS blocks to crystallize, was evidenced in the copolymers with long butylene succinate sequences. The results obtained indicated that the block size had a fundamental role in determining the crystallizability and, therefore, phase behavior of the block copolymers.     

Novel random poly(propylene isophthalate/adipate) copolyesters: Synthesis and characterization

Poly(propylene adipate) (PPA) and poly(propylene isophthalate/adipate) (PPI-PPA) random copolymers of various compositions were synthesized in bulk and characterized in terms of chemical structure and molecular weight. Furthermore, the thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability. At room temperature they appeared as semicrystalline materials, except the copolymers containing 20 and 30 mol% of PI units: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. The crystalline phase of PPI and PPA was evidenced at high content of propylene isophthalate or propylene adipate units, respectively. Amorphous samples were obtained after melt quenching and an increment of T_g as the content of PI units is increased was observed. This behavior was explained as due to the stiff phenylene groups in the polymeric chain. The Wood equation was found to describe well T_g-composition data. Lastly, the presence of a rigid-amorphous phase was evidenced in the copolymers, differently from PPA homopolymer.     

Synthesis,physical properties and enzymatic degradation of bio-based poly(butylene adipate-co-butylene furandicarboxylate) copolyesters

A series of bio-based poly(butylene adipate-co-butylene furandicarboxylate) (PBAFs) copolyesters were synthesized from 2,5-furandicarboxylic acid (FDCA), adipic acid (AA), and 1,4-butanediol (BDO) through a two-step polycondensation reaction. The copolyesters were characterized by ¹H NMR, GPC, DSC, XRD and tensile tests, and their enzymatic degradation behaviors were also investigated. They were random copolymers whose composition was well controlled and the weight average molecular weight (M_w) ranged from 54,100 to 76,800 g/mol. By combining the results of DSC and XRD, with increasing FDCA content, PBAFs changed from semi-crystalline polymers to nearly amorphous polymers, then to semi-crystalline polymers again. Specifically, the crystallizability and melting temperature (T_m) decreased with FDCA content 0–50 mol%, but rose again at FDCA content 75–100 mol%. And, the glass transition temperature (T_g) increased continuously with increasing FDCA content. Consequently, the tensile modulus and strength decreased but the ultimate elongation increased at lower FDCA content (0–50 mol%), which were converse at higher FDCA content (75–100 mol%). Especially, the P(BA-40 mol% BF) shows outstanding elasticity and rebound resilience. In addition, the influences of FDCA content on the enzymatic degradation by lipase from porcine pancreas were studied in terms of the weight loss and morphological change. At FDCA content of 0–50 mol%, the copolyesters showed biodegradability but only the degradation rate of P(BA-10 mol% BF) was faster than PBA. When the FDCA content were 75–100 mol%, they were actually un-degradable. Thus, depending on their composition, PBAFs might find applications from biodegradable elastomers to thermoplastics.     

Novel copolyesters based on poly(alkylene dicarboxylate)s: 1. Thermal behavior and biodegradation of aliphatic-aromatic random copolymers

In order to improve the thermal and mechanical properties of the poly(butylene 1,12-dodecanedioate), some novel aliphatic-aromatic random copolyesters have been prepared by starting from 1,4-butanediol and different molar ratio of 1,12-dodecanedioc acid and terephthalic acid. The samples were characterized by ¹H NMR and the molecular structure was correlated with the crystalline phase present, the level of crystallinity, the glass transition temperature, the mechanical behavior, and the biodegradability. In particular, the copolymer containing the 70 mol% of PBT repeating units notably improves the thermal and mechanical properties of the poly(butylene 1,12-dodecanedioate) towards those of PBT and maintains a very high thermal stability, but loses the biodegradability of the poly(alkylene dicarboxylate). Therefore, for this class of aliphatic-aromatic copolymers the chemical composition must be carefully chosen to reach a compromise between good thermal and mechanical performances and biodegradability, according to the necessity.     

Compatible blends of biorelated polyesters through catalytic transesterification in the melt

The transesterification during the melt blending of polylactide (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) was investigated in presence of Ti(OBu)₄ as a catalyst. Both the effect of catalyst concentration and reaction duration was considered. The process was studied by analyzing the molecular weight of the polyesters by size exclusion chromatography (SEC). The rheological, thermal and morphological properties of the blends were investigated by melt flow rate, DSC and SEM analyses, respectively. Evidences about the formation of PBAT-PLA copolymers were obtained and discussed. The tensile properties of compression moulded films were also determined and correlated to the structure and phase morphology development of the blends. In particular, the use of Ti(OBu)₄ resulted in the improvement of compatibility. Moreover, the decrease in stiffness and the increase in elongation at break with the increase of mixing time was observed, in good agreement with the improved compatibility of the modified blend.     

Novel copolyesters based on poly(alkylene dicarboxylate)s: 2. Thermal behavior and biodegradation of fully aliphatic random copolymers containing 1,4-cyclohexylene rings

Aliphatic poly(butylene 1,12-dodecanedioate) is an interesting biodegradable polyester characterized by high thermal stability and high crystallinity, but low melting temperature. In order to improve the performances of this polymer some novel fully aliphatic random copolyesters have been prepared starting from 1,4-butanediol and different molar ratio of 1,12-dodecanedioc acid and 1,4-cyclohexanedicarboxylic acid. The copolymers have a notable resistance to thermal degradation, thermal properties which vary as a function of the composition, and maintain the mechanical characteristics of the poly(alkylene dicarboxylate). In particular, the copolymer containing the 70 mol% of 1,4-cyclohexanedicarboxylate units improves the thermal properties of the poly(butylene 1,12-dodecanedioate) and presents a very high biodegradation rate, higher than those of the two parent homopolymers. This behavior has been correlated to the low level of crystallinity of the sample and to the composition of the amorphous phase. Therefore, these novel fully aliphatic copolymers represent an interesting new class of copolyesters which can balance good physical properties and high biodegradability.     

Preparation, characterization and hydrolytic degradation of poly[p-dioxanone-(butylene succinate)] multiblockcopolymer

A series of poly[p-dioxanone-(butylene succinate)] (PPDOBS) copolymers were prepared from p-dioxanone (PDO), 1,4-butanediol and succinate acids through a two-step process including the initial prepolymer preparation of poly(p-dioxanone)diol (PPDO-OH) and poly(butylene succinate)diol (PBS-OH) and the following copolymerization of the two kinds of prepolymers by coupling with hexamethylene diisocyanate (HDI). The molecular structures of the prepared PPDO-OH, PBS-OH and PPDOBS were characterized by hydrogen nuclear magnetic resonance spectroscopy (¹H NMR). The crystallization of the copolymers was investigated by using differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide angle X-ray diffraction (WAXD). It has been shown that the crystallization rate and the degree of crystallization increases with the increase of the weight fraction of poly(butylene succinate) (PBS) blocks in the copolymers. In phosphate buffer solution with pH 7.4 at 37 °C for 18 weeks, the hydrolytic degradation behaviors of the copolymers were studied. The changes of retention weight, water absorption, pH value, and surface morphologies with the degradation time showed that the hydrolytic degradation rate of PPDOBS could be controlled by adjusting the weight fraction of poly(p-dioxanone) (PPDO) and PBS blocks in the copolymers. The changes of the thermal properties of PPDOBS during the degradation were also investigated by DSC.     

Thermal decomposition of poly(propylene sebacate) and poly(propylene azelate) biodegradable polyesters: Evaluation of mechanisms using TGA, FTIR and GC/MS

The synthesis, characterization and thermal behavior of two biodegradable aliphatic polyesters poly(propylene azelate) (PPAz) and poly(propylene sebacate) (PPSeb) are described in the present work. The thermal degradation of both polyesters was studied using thermogravimetric analysis (TG) by the determination of their mass losses during heating. From the thermogravimetric curves it can be seen that both polyesters are thermally stable materials since PPAz has its highest decomposition rate at 411.3 while PPSeb at 413.6 °C. From the variation of activation energy (E) with increasing degree of conversion it is found that the polyester's decomposition proceeds with a complex reaction mechanism with the participation of at least two different mechanisms. To evaluate these mechanisms the TG, FTIR and a combination of TG-gas chromatography-mass spectrometry (TG/GC-MS) methods were used. From mass ions detection of formed decomposition compounds, it was found that the decomposition of both polymers takes place, mainly, through β-hydrogen bond scission and secondarily through α-hydrogen bond scission. The main decomposition products are aldehydes, alcohols, allyl, diallyl, and carboxylic acids.     

Synthesis and Properties of Poly （aryl ether ketone） Copolymers Containing 2,7-Naphthalene Moieties

IntroductionPoly(aryl ether ketone)s are high performance en-gineering plastics with outstanding physical,chemical,thermal and mechanical properties and have been ap-plied to the aerospace industry,the electronic industry,the automobile industry,the petro…     

Transesterification and crystallization behavior of poly(butylene succinate)/poly(butylene terephthalate) block copolymers

The block copolymers of poly(butylene succinate) (PBS) and poly(butylene terephthalate) (PBT) were synthesized by melt processing for different times. The sequence distribution, thermal properties, and crystallization behavior were investigated over a wide range of compositions. For PBS/PBT block copolymers it was confirmed by statistical analysis from ¹H-NMR data that the degree of randomness (B) was below 1. The melting peak (T_m) gradually moved to lower temperature with increasing melt processing time. It can be seen that the transesterification between PBS and PBT leads to a random copolymer. From the X-ray diffraction diagrams, only the crystal structure of PBS appeared in the M1 copolymer (PBS 80 wt %) and that of PBT appeared in the M3 (PBS 50 wt %) to M5 (PBS 20 wt %) copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 147–156, 1998     

Shape memory effects of poly(ethylene terephthalate-co-ethylene succinate) random copolymers

Random copolymers based on terephthalate acid, succinic acid and ethylene glycol, with thermally induced shape memory, were synthesized via melt polycondensation. The chemical structures of these poly(ethylene terephthalate-co-ethylene succinate) copolymers (PET-co-ES) were ascertained by ¹H NMR spectroscopy. The thermal and viscoelastic characteristics of these copolymers were studied in terms of the succinic acid content using differential scanning calorimetry and dynamic mechanical analysis. The shape memory effects of the copolymers were examined using the strain test. The experimental results suggested that all copolymers exhibited shape memory above the glass transition temperature and that the highest shape recovery rate was 90%. The shape recovery rates of all test samples declined with the number of cycles. This decrease in the shape recovery rate may result from the change in the degree of polymer orientation and/or crystallinity during repeated testing.     

Thermal and crystallization characteristics of poly(trimethylene terephthalate)/poly(ethylene naphthalate) blends

Poly(trimethylene terephthalate) (PTT)/poly(ethylene naphthalate) (PEN) blends were miscible in the amorphous state in all of the blend compositions studied, as evidenced by a single, composition-dependent glass transition temperature (T_g) observed for each blend composition. The variation in the T_g value with the blend composition was well predicted by the Gordon-Taylor equation, with the fitting parameter being 0.57. The cold-crystallization peak temperature decreased with increasing PTT content, while the melt-crystallization peak temperature decreased with increasing amount of the minor component. The subsequent melting behavior after both cold- and melt-crystallization exhibited melting point depression, in which the observed melting temperatures decreased with increasing amount of the minor component. During melt-crystallization, both components in the blends crystallized concurrently just to form their own crystals. The blend with 60% w/w of PTT exhibited the lowest total apparent degree of crystallinity.     

离子液体增塑改性玉米淀粉/聚丁二酸丁二醇酯共混材料的结构与性能

为考察离子液体对淀粉/聚丁二酸丁二醇酯(PBS)的作用效果,降低淀粉/PBS的脆性,以离子液体(1-丁基-3-甲基咪唑氯盐[BMIM]Cl)作为增塑改性剂通过熔融共混法制备了玉米淀粉/聚丁二酸丁二醇酯(PBS)共混材料,采用红外光谱(FTIR)、扫描电镜(SEM)、热重分析(TGA)、X射线衍射分析(XRD)及力学性能测试方法研究了[BMIM]Cl对淀粉/PBS共混材料结构和性能的影响.结果表明,[BMIM]Cl能与淀粉/PBS分子发生强相互作用,破坏淀粉/PBS共混物中原有的氢键与结晶结构,增强界面相互作用,改善相容性,进而改变淀粉/PBS共混材料的结构与性能;[BMIM]Cl的加入不影响淀粉/PBS的热稳定性,可使材料玻璃化转变温度(Tg)、结晶温度(Tc)、冷结晶温度(Tcc)及结晶度(Xc)降低.[BMIM]Cl具有显著降低淀粉/PBS脆性的作用,使其断裂伸长率大幅度增加,拉伸强度和弹性模量降低.     

Rigid amorphous fraction in poly(ethylene terephthalate) determined by dilatometry

Volumetric thermal analysis of semicrystalline poly(ethylene terephthalate), PET, with different content of crystalline phase was carried out using mercury-in-glass dilatometry. The effect of crystals on the thermal properties of amorphous phase (glass transition temperature, T _g, thermal expansion coefficients, α) were determined. At cold-crystallization (106°C, up to 4 h), crystalline content of 2.4–25.3 vol.% was achieved. Increasing content of crystalline phase broadens the glass transition region and increases T _g. The change of thermal expansion coefficient during glass transition is lower than that predicted by the two-phase model, which indicates the presence of a third fraction — rigid amorphous fraction (RAF), whose content steadily increases during crystallization. However, its relative portion (specific RAF) is significantly reduced. Further significant decrease in specific RAF appears after annealing at a higher temperature.     

Novel degradable copolyesters containing poly(ethylene oxalate) units derived from diethylene oxalate

Two series of poly(ethylene terephthalate-co-oxalate-co-sebacate) (PETOXS) have been synthesized by melt polycondensation using diethylene oxalate (DEOX) as a starting material. NMR quantified the composition, structure, and average sequence length of the copolyesters. Melting and crystallization properties differ from each other on the basis of PETOXS feature. Analysis of TG traces determined that initial degradation temperatures were affected by the content of PET. It was observed that the Young's modulus and the maximum tensile stress increased with increasing content of poly(ethylene oxalate) (PEOX) in aliphatic units, whereas the elongation at break considerably decreased. Obvious weight loss was observed in alkali hydrolysis experiments, and the degradation rates are subject to distinct factors when the ratio of two aliphatic polyester units is varied. DSC was performed to degraded copolyester samples, and the variation of melting temperature and crystallinity were investigated.