A study of the conformational stability of poly(β-benzyl l-aspartate), poly(γ-benzyl l-glutamate) and poly(β-benzyl l-aspartate)/poly(γ-benzyl l-glutamate) blend in the solid state by variable-temperature C CP/MAS NMR

¹³C CP/MAS NMR experiments on polypeptides, poly(β-benzyl l-aspartate) (PBLA), poly(γ-benzyl l-glutamate) (PBLG) and PBLA/PBLG blend have been carried out, in order to elucidate the conformational stability of the polypeptides in the solid state over a wide range of temperatures and its blending effect. The PBLA/PBLG blend with a mixture ratio of 1/1 is prepared by adding trifluoroacetic acid (TFA) solution to alkaline water (TFA-alkaline treatment). From these experimental results, it is found that the conformation of PBLA in the PBLA/PBLG blend sample is changed from left-handed helix (α_L-helix and/or ω_L-helix) form to the α_R-helix form, and then the origin of the formation of the α_R-helix form in PBLA comes from the existence of PBLG. Further, from the variable-temperature ¹³C CP/MAS NMR experiments results, it is shown that the conformational behavior of PBLA in the PBLA/PBLG blend is similar to that of the TFA-alkaline treated PBLA, and also the conformational behavior of PBLG in the PBLA/PBLG blend is similar to that of the TFA-alkaline treated PBLG.     

固体核磁共振研究分子筛的新进展

分子筛由于具有独特的孔道及可调控酸碱性等特征,被作为离子交换剂、吸附剂及催化剂而广泛应用于石油化工的各种催化过程中。固体核磁共振是研究分子筛结构、酸性及主客体相互作用的强有力谱学手段之一。简单概述了固体核磁共振研究分子筛的最近进展。     

Structure and dynamics of rodlike polyester with long n-alkyl side chains over a wide range of temperatures by solid state C NMR

Solid state ¹³C NMR experiments on poly(p-biphenylene terephthalate) with long n-dodecyl side chains have been carried out over a wide range of temperatures, in order to elucidate conformational and dynamical behavior of the polyester in the crystalline state and thermotropic liquid crystalline state. From these experimental results, it is found that at temperatures from room temperature to 80 °C the n-alkyl side chains take both of the immobile and the mobile regions, and at temperatures above 120 °C take only the mobile region. In the immobile region the n-alkyl side chains are in the all-trans zigzag conformation and in the mobile state are undergoing fast exchange between the trans and gauche conformations. On the other hand, the terephthalate moiety of the main chain undergoes rotational motion after the melt of n-alkyl side chains as the temperature is increased.     

Solution and solid state NMR studies of some selenium analogues of auranofin (an anti-arthritic gold drug)

Three mixed ligand complexes of gold(I) with phosphines and selenones, [Et₃PAuSe=C<]Br as analogues of auranofin (Et₃PAuSR) have been prepared and characterized by elemental analysis, IR and NMR methods. A decrease in the IR frequency of the C=Se mode of selenones upon complexation is indicative of selenone binding to gold(I) via a selenone group. An upfield shift in ¹³C NMR for the C=Se resonance of the selenones and downfield shifts in ³¹P NMR for the R₃P moiety are consistent with the selenium coordination to gold(I). ¹³C solid state NMR shows the chemical shift difference between free and bound selenone to gold(I) for ImSe and DiazSe to be ca 10 and 17?ppm respectively. Large ⁷⁷Se NMR chemical shifts (55?ppm) upon complexation in the solid state for [Et₃PAuDiazSe]Br compared to [Et₃PAuImSe]Br (10?ppm) indicates the former to be more stable and the Au–Se bond to be stronger than in the latter complex.     

Grafting polymerization on cellulose based textiles: A C solid state NMR characterization

Grafting of methyl methacrylate and ethyl acrylate onto cellulose chains of textiles with oxidized sites has been carried out. To this aim, carboxyl and carbonyl groups have been introduced by oxidation of the cellulose and used as photosensitive agents, allowing the formation of radical sites. The copolymerization has been started irradiating the substrate with ultraviolet light for a short time. With the grafting of acrylic monomers the mechanical strength and the thermal stability of cellulose based textiles may be improved, as well as the resistance to chemical and biological agents. The method has been successfully tested performing the grafting on a naturally aged cotton sample. It is worth to note that the grafting does not affect the aspect of the material.All samples have been characterized with ¹³C solid state NMR spectroscopy. A semi-quantitative evaluation of the grafting has been performed either studying the cross-polarization dynamic process, or by direct integration of resonances in ¹³C single pulse excitation spectra.     

Effect of silica nanoparticles on solid state polymerization of poly(ethylene terephthalate)

In the present study, the effect of silica nanoparticles, on the solid state polycondensation (SSP) kinetics of poly(ethylene terephthalate) (PET) is thoroughly investigated. At silica concentrations less than 1 wt% and reaction temperatures between 200 and 230 °C higher intrinsic viscosity (IV) values were measured, compared to neat PET at all reaction times. However, with 1 wt% of nanosilica (n-SiO₂), the IV increase of the nanocomposites was similar to that of neat PET and a further increase to 5 wt% n-SiO₂ resulted in significantly lower IV values. A simple kinetic model was also employed to predict the time evolution of IV, as well as the carboxyl and hydroxyl content during SSP. The kinetic parameters of the transesterification and esterification reactions were estimated at different temperatures with or without the addition of n-SiO₂. The activation energies of both reactions were determined together with the concentration of inactive end-groups. From the experimental measurements and the theoretical simulation results it was proved that n-SiO₂ in small amounts (less than 1 wt%) enhances both the esterification and transesterification reactions at all studied temperatures acting as a co-catalyst. However, as the amount of nanosilica increases a number of inactive hydroxyl groups were estimated corresponding to participation of these groups in side reactions with the nanosilica particles. These side reactions lead initially to branched PET chains and eventually (5 wt% n-SiO₂ concentration) to crosslinked structures.     

On the different coordination of Ni, Zn and Cd cations in their model Schiff base complexes - Single crystal X-ray and solid state NMR studies

Three model metal complexes: Ni(NCS)L, Zn₂(NCS)₂L₂ and Cd₂(NCS)₂L₂, consisting of the SCN⁻ anion(s) and L = 2-[(2-dimethylaminoethylimino)-methyl]-phenolate, have been studied by X-ray diffraction and solid state NMR spectroscopy. The metal cations in these complexes have different coordination modes: Ni²⁺ is almost square-planar, the Zn²⁺ cation in Zn₂(NCS)₂L₂ is pentacoordinated, whereas Cd²⁺ is penta- and hexacoordinated in [Cd₂(NCS)₂L₂]. The different coordination of the metal cations influences the chemical shifts of the metal cations and also the nitrogen atoms. These chemical shifts can be correlated with the M-N and M-O bond lengths (M = Ni²⁺, Zn²⁺, Cd²⁺).     

Modern solid state NMR techniques and concepts in structural studies of synthetic polymers

In this mini‐review, we present the solid state nuclear magnetic resonance (NMR) methods which trace the new tendency in structural studies of synthetic polymers. The review is organized into three sections. In the first part, short theoretical background and introduction to very fast magic angle spinning NMR technique with sample rotation 60 kHz are shown. The second part presents method for enhancing the sensitivity of NMR experiments by application of dynamic nuclear polarization magic angle spinning technique. In the third section, the power of the NMR crystallography approach which can be used for fine refinement of polymers structure on the atomic level is discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Molecular miscible blend of poly(2-cyano-1,4-phenyleneterephthalamide) and polyvinylpyrrolidone characterized by two-dimensional correlation FTIR and solid state C NMR spectroscopy

Miscibility of blends of poly(2-cyano-1,4-phenyleneterephthalamide/polyvinylpyrrolidone) (CN-PPTA/PVP) was investigated by dilute solution viscometry, two-dimensional (2D) correlation Fourier transformed infrared (FTIR) spectroscopy and solid state ¹³C NMR spectroscopy. It was shown that a large proportion of the PVP, the water-soluble component, could not be removed from CN-PPTA by extraction with water, and even with boiling water for blend films, suggesting that the flexible aliphatic PVP chain forms a blend with the rigid aromatic CN-PPTA chain through strong intermolecular interaction making it too difficult to dissolve even in boiling water. Viscometry on a polymer mixture of dilute solution showed that [η]_exp exhibited larger value than [η]_theo in all mixtures used in this experiment, suggesting occurrence of a strong attractive interaction between the two polymers. 2D correlation FTIR spectroscopy revealed that the carbonyl absorption band of PVP at 1675 cm⁻¹ shifted to a new low frequency absorption band at 1640 cm⁻¹ with a change of 35 cm⁻¹, suggesting strong hydrogen bonding with NH (amide II) proton of CN-PPTA. Another new absorption band at 1685 cm⁻¹ was due to the carbonyl absorption band of CN-PPTA shifting to a higher frequency than that at 1662 cm⁻¹, indicating that some of the carbonyl groups in the CN-PPTA components of the blends were in a free state or in a non-hydrogen bonded state as a consequence of the participation of NH proton of CN-PPTA in hydrogen bonding, resulting in the absorption bands of NH bend deformation of CN-PPTA at 1542 and 1313 cm⁻¹ being shifted to higher wavenumber of 1556 and 1324 cm⁻¹, respectively. Solid state ¹³C NMR spectroscopy revealed a chemical shift for CO of the PVP component in the blend fiber changing down-field (shift to left) at 177.346 ppm with a difference of 1.812 ppm; this was due to a lower electron density around the carbon atom of CO of lactam via hydrogen bonding with NH proton of amide in the CN-PPTA component, suggesting that a homogeneous blend of the CN-PPTA and PVP was produced on a molecular scale via hydrogen bonding.     

Polymorphism of phenylpyruvic acid studied by IR, Raman and solid state C NMR spectroscopy

Polymorphs I and II of phenylpyruvic acid are obtained as mixtures of both crystal forms or relatively pure crystals, from different solvents. Polymorph I is more stable than polymorph II at room temperature. Spectral characteristics of these polymorphs are discussed on the basis of IR, Raman and solid state ¹³C NMR spectra. Also, the assignment of the IR features observed in the 1600–1700 cm⁻¹ region is re-investigated by referring to the spectra of heavy-atom substituted derivatives. It is suggested that the C=O stretching band is split by the crystal field for both polymorphs.     

The relationship between crystal structure and NMR relaxation in molecular solids with tert-butyl groups

We correlate an X-ray determination of the molecular and crystal structures of 2-tert-butylanthracene and 2-tert-butylanthraquinone reported here with the previously reported dynamical nuclear magnetic resonance determination of the motions of the tert-butyl groups and their resident methyl groups in the solid state [P.A. Beckmann, K.S. Burbank, M.M.W. Lau, J.N. Ree, T.L. Weber, Chem. Phys. 290 (2003) 241].     

Solid-state NMR study of biodegradable starch/polycaprolactone blends

Abundant literature exists on starch or modified starch blended with biodegradable polyesters to achieve good performance with cheap compost plastics. The level of miscibility in these blends is one of the most relevant parameters. In the present study, solid-state ¹H and ¹³C NMR spectra, as well as carbon spin-lattice relaxation times T₁(C) and proton spin-lattice relaxation times T₁(H) and proton spin-lattice relaxation times in the rotating frame T_1ρ(H) of biodegradable starch (or starch formate)/polycaprolactone (PCL) (or polyester (PE) oligomers) blends and samples of the neat components were measured. From the T_1ρ(H) and T₁(H) relaxation times it follows that blends starch/PCL, starch/PE-oligomers and starch formate/PE-oligomers are phase separated even on the scale of 20-110 nm. On the contrary starch formate/PCL blend is phase separated on the scale 2.5-12 nm but homogeneously mixed on the scale 20-90 nm. Moreover, shorter T₁(C) and especially T_1ρ(H) values found for the starch or starch formate component in all these blends in comparison with neat samples show that molecular mobility of starch and starch formate segments is affected by blending. This indicates some miscibility also in phase separated blends which can happen in amorphous channels of starch.     

Effect of activated carbon black nanoparticles on solid state polymerization of poly(ethylene terephthalate)

Solid state polycondensation (SSP) is a conventional method used to increase the molecular weight of poly(ethylene terephthalate) (PET) in order to become more suitable for applications as carbonated soft drink bottles, etc. In the present study, the effect of activated carbon black (ACB) nanoparticles, on the SSP kinetics is examined. TEM micrographs revealed that ACB was finely dispersed into PET matrix as individual nanoparticles without creating agglomerates. Intrinsic viscosity (IV) measurements revealed that at temperatures 210 and 220 °C the activated carbon black does not influence the IV increase. However, at 230 and 240 °C an accelerating effect was found and higher intrinsic viscosity values were measured, compared to neat PET. Furthermore, a simple kinetic model was employed to predict the time evolution of IV, as well as the carboxyl and hydroxyl content during SSP. The kinetic parameters of the transesterification and esterification reactions were estimated at different temperatures with or without the addition of ACB. From the experimental measurements and the theoretical simulation results it was proved that ACB enhances the esterification reaction at all studied temperatures acting as a co-catalyst. However, the transesterification reaction remains unaffected by the presence of ACB at elevated temperatures (230 or 240 °C), while it is reduced at lower values (210 and 220 °C). Finally, the activation energies of both transesterification and esterification were determined together with the concentration of inactive end-groups.     

Thermal degradation of elastomeric vulcanized poly(ethylene-co-vinyl acetate) (EVM): Chemical and kinetic investigations

The thermal degradation of vulcanized elastomeric poly(ethylene-co-vinyl acetate) (EVM) in inert and oxidative conditions was investigated. Based on the characterization of both condensed and gas phases during the thermal degradation it was possible to propose a reaction scheme of the EVM degradation. In addition, the determination of the kinetic parameters completed the chemical investigations. The thermo-oxidation of vulcanized EVM occurs in five steps, including the cleavage of some cross-linking bonds, the catalytic deacetylation forming polyenes and a charring step, followed by the decomposition and oxidation of the char. It appeared that the curing, and thus the cross-linking nodes, enhances the thermal stability of EVM by favouring the charring. On the other hand the pyrolysis of the polymer is quite not influenced by the vulcanization.     

X-ray diffraction study of poly(p-phenylene terephthalamide) fibres

On the basis of an X-ray diffraction study, a model is proposed for the crystal and molecular structure of poly(p-phenylene terephthalamide). The monoclinic (pseudo-orthorhombic) unit cell [$\text{a = 7·87}\text{A}\text{?}\text{, b = 5·18}\text{A}\text{?}\text{, c (}\text{fibre axis}\text{) = 12·9}\text{A}\text{?}\text{and}\text{γ = 90°}$] possesses Pn or P2₁/n space-group symmetry. Two molecular chains pass through the cell, one through the centre and the other through a corner. Approximate values for the orientation angles between the phenylene planes and the amide planes are 38° for the p-phenylene diamine segment and -30° for the terephthalic segment. Hydrogen bonds are formed between adjacent chains lying in the (100) plane. The conformation of the chain is primarily governed by competitive intramolecular interactions between the conjugated groups.     

Thermochromism in nickel(II) complexes: thermal, solid state H NMR and single crystal X-ray analysis of bis-(N,N-dimethyl-1,2-ethanediamine) nickel(II) perchlorate

The complex bis-(N,N-dimethyl-1,2-ethanediamine) nickel(II) perchlorate undergoes a first-order thermochromic phase transition at ca. 476 K, changing its color from orange to red. The room temperature X-ray crystal structure determination showed that the nickel ion possesses a square-planar geometry with two five membered chelate rings, in the δλ conformation, forming the NiN₄ chromophore. The broad-line ¹H NMR indicates the onset of a dynamic disorder of diamine chelate rings at the phase transition temperature region, while T₁ measurement of ¹H affords the activation energy of the puckering metal chelate rings to be 26 kJ mol⁻¹. The electronic spectrum revealed that a weakening of ligand field around the nickel is associated with the phase transition.     

Solid state NMR study of intercalate complexes of poly(ethylene oxide) and small molecules

From solid state NMR spectra, a lower shielding of poly(ethylene oxide) (PEO) protons, in contrast to higher shielding of PEO carbons, has been found for PEO/hydroxybenzene and PEO/LiCF₃SO₃ complexes in comparison with neat PEO. The same PEO chemical shifts were found both for crystalline and amorphous phase of PEO/LiCF₃SO₃ polymer electrolyte, confirming the same interaction in both phases. Measurements of 2D ¹H CRAMPS exchange NMR spectra have been used to characterize proton distances in complexes of PEO and benzene derivatives. A close contact (∼ 0.3 nm) between aromatic and PEO protons was detected in some cases. From the measurements of the cross polarization ¹H → ¹³C, using Lee-Goldburg irradiation of ¹H nuclei, the distance between LiCF₃SO₃ carbon and the nearest PEO protons in the PEO/LiCF₃SO₃ complex was determined.     

Solid state polymerization of poly(lactic acid): Some fundamental parameters

Poly(lactic acid) (PLA) was submitted to solid state polymerization (SSP) in a fixed bed reactor under nitrogen flow, so as to examine technique efficiency for increasing the molecular weight and hence permitting the reduction of the melt polymerization residence times. In order to use a suitable starting material, SSP prepolymers of low and medium molecular weight were first prepared through solid state hydrolysis of commercial PLA grade under acidic and alkaline conditions. During these degradation runs, hydrolysis involved the random scission of ester groups in the polymer backbone, while the relevant kinetics and the resulting thermal properties were also examined. In a subsequent step, the prepolymers obtained were subjected to SSP at three temperatures, approximately 2.5–25.0 °C below their melting point. The process achieved an increase of up to 1.7 times the initial molecular weight, however, with different trends depending on the prepolymer characteristics, reaction temperature and time, as well as the pH of the hydrolysis medium. In addition to molecular weight build up, the effect of the SSP process on end product thermal properties was also investigated.     

固体核磁共振弛豫在高分子研究中的应用

本文综述了近年来固体核磁弛豫方法在高分子研究中的应用，共分５个部分加以介绍：（１）自旋－晶格弛豫过程；（２）在旋转坐标系中的＾１３Ｃ自旋－晶格弛豫过程；（３）交叉极化速率和旋转坐标系中的＾１Ｈ自旋－晶格弛豫过程；（４）自旋－自旋弛豫过程；（５）动态结构导致的线形变化。本文主要讨论磁性核的各种弛豫过程以及它们与分子结构和分子运动的关系。