分别含有质子给体和质子受体的丙烯酸酯共聚物在溶液中的特殊相互作用研究

用粘度法和光散射法研究了分别具有质子给体 (Protondonor)和质子受体 (Protonacceptor)官能团的丙烯酸酯共聚物在溶液中的相互作用 .从粘度增长因子和聚合物在溶液中理想增比粘度的关系基础上提出了一个新的相互作用参数ka,研究了质子给体聚合物和质子受体聚合物在甲苯中的特殊相互作用 ,讨论了丙烯酸酯含量和酯烷基长度对组分间相互作用的影响 .结果表明 ,组分间的特殊相互作用随着丙烯酸长碳链酯含量和酯烷基长度的增加而增强 .光散射的结果表明ka 能够用于表征共混体系中的特殊相互作用     

含有不同功能基团的丙烯酸长链酯共聚物在溶液中的相互作用研究(Ⅰ)

合成了分别具有质子给体和质子受体官能团的丙烯酸正辛酯共聚物。由于在给体和受体聚合物上分别引入的羧酸基团（AA）和碱性基团（VP）,在溶液中进行共混复合时存在彼此间的相互作用而使共混体系表现出较高的比浓粘度。引入比浓粘度增长因子R,讨论了共混组分和溶剂体系等因素对聚合物分子链间相互作用的影响。结果表明,质子给体聚合物（PDP）和质子受体聚合物（PAP）的相互作用强度及等化学复合比与组分聚合物的分子链组成和溶剂性质有关。     

Composition and plasticizing effect of poly(carboxylic acid) complexes with amino compounds

Poly(carboxylic acid)-dimethylalkylamine complexes were prepared and examined by various methods including infrared spectrometry and chemical titrations. FTIR measurements provided some of the most complete and detailed insights into the type and the stoichiometry of the acid-base complexes. A (1:1) stoichiometric complexation of the poly(carboxylic acid) with tertiary amines was involved in protic solvents. A threshold degree of complexation of 42% was obtained in such a macromolecular system. The equilibrium constant of the proton transfer reaction K was estimated to be independent on the alkyl chain length of the base reagent. Besides the formation of the acid-base complexes, a plasticizing effect of the amine derivatives was demonstrated by differential calorimetry. A T_g depression could be both attributed to the amine molecules linked to the polymer backbone via ionic bonds and to the free molecules dissolved within the free volume of the polymer.     

Effects of polyaniline chain structures on proton conduction in a PEM host matrix

This study examined the effects of the conjugated chain structure of polyaniline (PAn) on proton transport in a proton exchange membrane (PEM) containing a small amount of PAn colloidal particles. The PEM host matrix consisted of a hydrophobic three-component polymer blend (TCPB) of poly(4-vinylphenol-co-methylmethacrylate) P(4-VP-MMA), poly(butyl methacrylate) (PBMA), and Paraloid^® B-82 acrylic copolymer resins; in which a hydrophilic network of 2-acrylamido-2-methyl propanesulfonic acid (AMPS), 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol)dimethylacrylate (PEGDMA) was formed upon embedded polymerization. Colloidal PAn particles were added to the PEM matrix during the embedded polymerization of PEM. Two types of PAn colloidal particles with different chain structures and morphologies were synthesized by inverse miniemulsion polymerization and interfacial polymerization. The PAn(1) particles from inverse miniemulsion polymerization were bar-shaped, contained a higher fraction of quinoid diimine units than the scaffold-like PAn(2) particles from interfacial polymerization, and displayed a strong promotional effect on proton conduction. The oxidation state of the PAn particles was also varied by post-synthesis treatments to evaluate the effect of oxidation state on proton conduction. It was found that a mixed oxidation state such as the emeraldine form of PAn had the best enhancement effect. The PAn loading optimal for proton conductivity enhancement of the composite PEM was determined to be about 2 wt% of PAn(1).     

Anhydrous proton conducting membranes based on crosslinked graft copolymer electrolytes

A comb-like copolymer consisting of a poly(vinylidene fluoride-co-chlorotrifluoroethylene) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. P(VDF-co-CTFE)-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and a microphase-separated structure of the copolymer were confirmed by proton nuclear magnetic resonance (¹H NMR), FT-IR spectroscopy, and transmission electron microscopy (TEM). This comb-like polymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the –OH groups of PHEA and the –COOH groups of IDA. Upon doping with phosphoric acid (H₃PO₄) to form imidazole–H₃PO₄ complexes, the proton conductivity of the membranes continuously increased with increasing H₃PO₄ content. A maximum proton conductivity of 0.015 S/cm was achieved at 120 °C under anhydrous conditions. In addition, these P(VDF-co-CTFE)-g-PHEA/IDA/H₃PO₄ membranes exhibited good mechanical properties (765 MPa of Young's modulus), and high thermal stability up to 250 °C, as determined by a universal testing machine (UTM) and thermal gravimetric analysis (TGA), respectively.     

Compatibility between polystyrene copolymers and polymers in solution via hydrogen bonding

It has been applied the concept of improving miscibility, by introducing and optimizing the extent of intermolecular hydrogen-bonding interactions between two polymers. We select a commodity polymer such as polystyrene, to study the compatibility in chloroform with poly(vinyl pyridine) and poly(vinyl pyrrolidone), both considered as proton acceptors. In order to enhance polymer-polymer miscibility, polystyrene is slightly modified by copolymerization with methacrylic acid, in the first case, and with vinyl-phenol comonomer, in the second one. In this way, two series of polystyrene-based copolymers are synthesized and characterized bearing ca. 8% (w/w) of -OH groups. The miscibility gaps through the binodal ternary phase diagrams, interpolymer interaction parameter from viscometry and the evaluation of the interassociation equilibrium constant, K, by FT-IR spectroscopy serve to analyze the effect of the spacing of interacting moieties along the polystyrene chain. Our results prove that polymer-polymer miscibility increases with an increase in the methacrylic-acid content in the copolymer chain; however, when the polar group is vinyl phenol, this continuous trend is disrupted.     

Water-soluble polypyrroles by matrix polymerization: Interpolymer complexes

A new class of water-soluble polypyrroles (PPy) has been developed. This was accomplished by oxidative matrix polymerization of pyrrole (Py) monomer with Ce(IV) in the presence of poly(acrylic acid) (PAA), poly(vinyl pyrrolidone) (PVP), and copolymers (CP) of vinyl pyrrolidone(VP) with acrylic acid (AA) [VP/AA; 25/75 (CP₁), 50/50 (CP₂), 75/25 (CP₃)]. The soluble and insoluble interpolymer complexes were observed according to the nature (and conformation) of polymers in mixture, the ratio of components, and the pH of solutions. The role of PAA, PVP, CP, Py, and Ce(IV) concentrations, the order of component addition, and the pH of the solutions were investigated. The evidence and structural reasons for the formation of soluble interpolymer complexes of PPy with different polymers are discussed. It is proposed that the compactization of the polymer matrix as well as the disturbance of the regularity of reactive groups on the polymer chain decreases the possibility of formation of soluble interpolymer complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1255–1263, 1997     

Preparation and proton conductivity of acid-doped 5-aminotetrazole functional poly(glycidyl methacrylate)

Proton conducting polymer membranes have become crucial due their applications in fuel cells as source of clean energy. In this work, we synthesized poly(glycidyl methacrylate) (PGMA) by conventional free radical polymerization of GMA using azobisisobutyronitrile (AIBN) as initiator. PGMA was modified with 5-aminotetrazole by ring opening of the epoxide group. The composition of the polymer was studied by elemental analysis (EA) and the structures were characterized by FT-IR and solid ¹³C NMR spectra. Thermogravimetry analysis (TG) and differential scanning calorimetry (DSC) were employed to examine the thermal stability and homogeneity of the materials, respectively. Polymers were doped with H₃PO₄ at several stoichometric ratios. The effect of doping on the proton conductivity was studied via impedance spectroscopy. Maximum proton conductivity of acid-doped PGMA-aminotetrazole was found to be 0.01 S/cm at 150 °C in the anhydrous state.     

IR spectra and structure of poly(vinylamide) complexes with hydrogen peroxide

The IR spectra of anhydrous thin films of hydrogen peroxide complexes with cyclic and aliphatic poly(N-vinylamides) have been studied. Splitting of a band due to stretching vibrations of C=O groups in the IR spectra of the poly(vinylcaprolactam) complex is accounted for by the resonance interaction of v _C=O vibrations of two monomer units linked by a hydrogen peroxide molecule. The formation of a N-H···O=C intramolecular hydrogen bond between neighboring polymer units is responsible for the observed low absorption of hydrogen peroxide by N-vinylamide polymers and copolymers. The energy E _H of hydrogen bonds formed between hydrogen peroxide and polymer chain fragments has been estimated by quantum-mechanical calculations. Depending on the complex structure, the value of E _H varies from 13 to 29 kJ/mol.     

Laser photolysis of polymer EDA complexes including 4,4′-diaminodiphenylmethane derivatives

Transient optical absorption spectra were obtained and photochemical transformations of aromatic amine derivatives (Am) used as electron donors in polymer EDA complexes were studied. It was shown that successive electron — proton — electron processes in (Am.CBr₄) complexes are strongly influenced by whether the Am is monomer or a molecular fragment chemically incorporated into a macromolecular chain.     

Conductivity and thermal behavior of proton conducting polymer electrolyte based on poly (N-vinyl pyrrolidone)

The polymer electrolytes based on poly N-vinyl pyrrolidone (PVP) and ammonium thiocyanate (NH₄SCN) with different compositions have been prepared by solution casting technique. The amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. The shift in T_g values and the melting temperatures of the PVP-NH₄SCN electrolytes shown by DSC thermo-grams indicate an interaction between the polymer and the salt. The dependence of T_g and conductivity upon salt concentration have been discussed. The conductivity analysis shows that the 20 mol% ammonium thiocyanate doped polymer electrolyte exhibit high ionic conductivity and it has been found to be 1.7 × 10⁻⁴ S cm⁻¹, at room temperature. The conductivity values follow the Arrhenius equation and the activation energy for 20 mol% ammonium thiocyanate doped polymer electrolyte has been found to be 0.52 eV.     

Influence of preferential solvation on the interpolymer complex formation between methacrylic acid–methacrylamide copolymer and poly(vinyl pyrrolidone)

Interpolymer complex formation has been studied between methacrylic acid–methacrylamide copolymer and poly(vinyl pyrrolidone) in acetone–water mixtures of different compositions. At a specific composition of the solvent (e.g., 70% water + 30% acetone by volume), the intrinsic viscosity of the copolymer and the reduced viscosity of 1:1 interpolymer complex had minimum values. Preferential solvation coefficients (λ/C) have been calculated for the various compositions of the solvent mixtures. An excellent coincidence could be obtained between the maximum (λ/C) and the minimum in the viscosity of the polymer solutions. Interpretations have been sought in terms of conformational change of the copolymer at the specific composition of the solvent mixture.     

PH effects in the complex formation and blending of poly(acrylic acid) with poly(ethylene oxide)

The effect of pH on the complex formation between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) has been studied in aqueous solutions by turbidimetric and fluorescent methods. It was shown that the formation of insoluble interpolymer complexes is observed below a certain critical pH of complexation (pH(crit1)). The formation of hydrophilic interpolymer associates is possible above pH(crit1) and below a certain pH(crit2). The effects of polymer concentrations in solution and PEO molecular weight as well as inorganic salt addition on these critical pH values were studied. The polymeric films based on blends of PAA and PEO were prepared by casting from aqueous solutions with different pHs. These films were characterized by light transmittance measurements and differential scanning calorimetry. The existence of the pH value above which the polymers form an immiscible blend was demonstrated. The transitions between the interpolymer complex, miscible blend, and immiscible blend caused by pH changes are discussed. The recommendations for preparation of homogeneous miscible films based on compositions of poly(carboxylic acids) and various nonionic water-soluble polymers are presented.     

Synthesis and properties of poly(aryl ether benzimidazole) copolymers for high-temperature fuel cell membranes

A series of poly(aryl ether benzimidazole) copolymers bearing different aryl ether linkage contents were synthesized by condensation polymerization in polyphosphoric acid (PPA) by varying the feed ratio of 4,4′-dicarboxydiphenyl ether (DCPE) to terephthalic acid (TA). As the ether unit content in the copolymer increased, the solubility of the copolymer in PPA and N,N′-dimethylacetamide/LiCl improved. For example 3–7 wt.% DMAc solution containing 2 wt.% of LiCl could be prepared from the copolymers. XRD studies revealed that the incorporation of flexible aryl ether linkages increased the chain d-spacings of the polymer backbones and decreased the crystallinity of the copolymers. Still, these copolymers having ether linkages showed reasonably good thermal/mechanical stability and high proton conductivity. For example, the copolymer with 30 mol% ether linkage had a tensile strength of 43 MPa (at 26 °C and 40% relative humidity) at an acid doping level of 7.5 mol H₃PO₄ and a proton conductivity of 0.098 S cm⁻¹ (at 180 °C and 0% relative humidity) at an acid doping level of 6.6 mol H₃PO₄.     

Hydrolytic degradation of carbohydrate-based aromatic homo- and co-polyesters analogous to PET and PEI

The hydrolytic degradation of a series of homo- and co-polyesters analogous to poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI), prepared from carbohydrate-based monomers, was studied. The degradation process was carried out at temperatures of approximately 10 °C above the T_g of the polymers. All the studied polyesters were found to degrade at significant rates, and degradability showed a clear dependence on the configuration of the sugar units present in the polymer chain. No weight loss was detected upon degradation, apparently due to the non-solubility of the degraded products in the aqueous incubation medium. Hydrolysis of co-polyesters took place preferentially by cleavage of the ester groups of the sugar units.     

Ternary blends of poly(ethylene oxide) and acrylate-based copolymers: Crystallinity, miscibility, interactions and proton conductivity

In the present work, blends of poly(ethylene oxide) (PEO), poly(acrylonitrile-co-methyl acrylate) (PANMA) and poly(4-vinylphenol-co-2-hydroxyethyl methacrylate) (PVPh-HEM) were studied by DSC, FTIR and electrochemical impedance spectroscopy (EIS). PEO/PANMA blends were found to be immiscible, while PEO/PVPh-HEM blends are miscible and PVPh-HEM/PANMA exhibits partial miscibility behaviour. The ternary PEO/PANMA/PVPh-HEM blends exhibited miscible compositions for PVPh-HEM and PEO-rich systems. The miscibility observed is a direct consequence of the hydrogen bond interactions among the polymer chains, in which the phenol groups in PVPh-HEM interact with both PEO and PANMA chains. The proton conductivity of a selected membrane based on the ternary blend containing 60% PEO and doped with H₃PO₄ aqueous solution reached 8 × 10⁻³ Ω⁻¹ cm⁻¹ at room temperature and 3 × 10⁻² Ω⁻¹ cm⁻¹ at 80 °C.     

Polymer-polymer interaction parameters in solvent/polymer/polymer ternary systems

Empirical equations defining the relationships between b₂₃ and χ₂₃ interaction parameters for the ternary systems toluene (1)/poly(dimethylsiloxane), PDMS, (2)/polystyrene, PS, (3) and benzene (1)/PDMS(2)/PS(3) have been determined. The dependences of both interaction parameters on the mean molecular weights of the macromolecular components have also been studied. A single dependence of b₂₃ (or χ₂₃) upon the mean molecular weight is found when both polymeric components have intermediate to high molecular weights. However, that single dependence is not found when the molecular size of polymer (2) is low.     

Miscibility and interactions of polystyrene/polyolefine and polystyrene/poly(n-alkyl methacrylate) mixtures in dilute xylene solutions

The miscibility and intermolecular interactions between polystyrene (PS) and poly(ethylene-co-propylene) (EPC), as well as between PS and long-chain poly(alkyl methacrylates) (PAMA), namely, poly(dodecyl methacrylate) (PDDMA) and poly(octadecyl methacrylate) (PODMA), in dilute xylene solutions at 30 °C were studied. Investigated polymers are widely used as rheology modifiers, i.e. viscosity index improvers and pour point depressants for lubricating mineral oils. The specific and reduced viscosities of two- and three-component polymer solutions as well as intrinsic viscosities and Huggins’ parameter values were determined as functions of the polymer mixture composition and overall polymer concentration. The reduced viscosity was found to be linearly dependent on the overall polymer concentration. The observed viscosities of polymer mixtures were intermediate to those of the mixture constituents; the values decrease in the order: EPC > PS > PAMA. The specific viscosities of all the polymer mixtures obtained as the experimental results and calculated applying the Catsiff-Hewett and Krigbaum-Wall theoretical equations were considered. Since all the polymer/polymer pairs showed the negative viscometric interaction parameter values (Δb₁₂ < 0), the PS/EPC and EPC/PAMA mixtures were found to be immiscible. The observed repulsive molecular interactions originate from the differences in polymer composition and molar masses. This conclusion was supported by calculations employing the group contribution approach of Coleman, Graf and Painter. The calculated values of interaction parameters for (co)polymer blends, Λ₁₂, were 5.47, 6.42 and 13.1 J cm⁻³ for PS/PDDMA, PS/PODMA and PS/EPC, respectively.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.