Copolymerization of N,N-diallyl-N,N-dimethylammonium chloride with ethylene glycol vinyl ether in aqueous medium

The radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride (AMAC) (M₁) with ethylene glycol vinyl ether (M₂) in an aqueous medium proceeds at a high rate to afford random copolymers. The reactivity ratios equal to r ₁ = 2.18 and r ₂ = 0.01 indicate that AMAC is a more active comonomer. The overall reaction order in comonomers is 2.4, and the effective activation energy is 97.4 ± 2 kJ/mol. The monomer M₁ enters into copolymerization by both of the double bonds with the formation of pyrrolidinium structures in the chain through the cyclization stage.     

Characterisation of glycidylmethacrylate/methacrylonitrile copolymers by NMR spectroscopy

Glycidylmethacrylate/methacrylonitrile (G/M) copolymers of different compositions were prepared and a copolymer composition was obtained from quantitative ¹³C NMR spectroscopy. Reactivity ratios for comonomers were calculated using the Kelen–Tudos (KT) and non linear error in variable (EVM) methods. The reactivity ratios obtained from KT and EVM are r_G=1.14±0.1, r_M=0.76±0.06 and r_G=1.12, r_M=0.75, respectively. Complete spectral assignment of ¹³C- and ¹H-NMR spectra were done with the help of Distortionless Enhancement by Polarization Transfer (DEPT) and 2D ¹³C–¹H heteronuclear single quantum coherence (HSQC).     

Copolymerization of Allilidene Diacetate with Vinyl Acetate

Abstract

The monomer reactivity ratios for vinyl acetate (VAc)-allilidene diacetate (ADA) copolymerization have never been obtained. The composition of VAc-ADA copolymers was determined by NMR spectroscopy, measuring CH protons corresponding to ADA at 3.1τ and VAc at 5.1τ. The monomer reactivity ratios were evaluated; r₁ = 1.34 ± 0.05 and r₂ = 0.48 ± 0.03, where M₁ = ADA and M₂ = VAc. From these values the Q and e values for ADA were calculated: Q = 0.047 and e = 0.44 by taking Q = 0.026 and e = ?0.22 for VAc. The H value [1] for copolymerization of ADA, VAc, and vinyl chloride (VC) is 0.87.     

Free Radical Copolymerization of N‐Cyclohexylmaleimide with Cyclohexene

The radical copolymerization of cyclohexene (M₁) and N‐cyclohexylmaleimide (M₂) was carried out with 2,2′‐azobis(isobutyronitrile) as an initiator in various solvents at 55°C. The copolymerization of cyclohexene with N‐cyclohexylmaleimide in chloroform, dioxane and benzene proceeded in a homogeneous system to give an alternating copolymer when the monomer of cyclohexene was over 40 mol% in the feed. It was found that the initial rate of the copolymerization (R_p), as well as the number‐average molecular weight of copolymers, were dependent on the monomer composition and was at maximum at about 30 mol% of cyclohexene in the feed. The effects of solvents on the R_p and reactivity ratios were also investigated in this copolymerization system. The copolymerization in dioxane produced a higher R_p than that in chloroform and benzene, and the monomer reactivity ratios were found to be r₁=0, r₂=0.032 in chloroform; r₁=0, r₂=0.065 in benzene and r₁=0, r₂=0.14 in dioxane, respectively.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Copolymerization of 4‐Propanoylphenyl Acrylate with Methyl Methacrylate: Synthesis,Characterization and Reactivity Ratios

The new acrylic monomer 4‐propanoylphenyl acrylate (PPA) was synthesized and copolymerized with methyl methacrylate (MMA) in methyl ethyl ketone at 70±1°C using benzoyl peroxide as a free radical initiator. The copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The compositions of the copolymers were determined by ¹H‐NMR analysis. The reactivity ratios of the monomers were determined using Fineman‐Ross (r₁=0.5535 and r₂=1.5428), Kelen‐Tüdös (r₁=0.5307 and r₂=1.4482), and Ext. Kelen‐Tüdös (r₁=0.5044 and r₂=1.4614), as well as by a nonlinear error‐in‐variables model (EVM) method using a computer program, RREVM (r₁=0.5314 and r₂=1.4530). The solubility of the polymers was tested in various polar and non‐polar solvents. The elemental analysis was determined by a Perkin‐Elmer C‐H analyzer. The molecular weights (M_w and M_n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of MMA in the copolymers. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of MMA in the copolymers.     

Photosensitized copolymerization of optically active N-l-menthylmaleimide with styrene and methyl methacrylate

Photosensitized copolymerization of optically active N-l-menthylmaleimide (NMMI) with styrene (Sty) and methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) at 30°C with benzoyl peroxide (BPO). The monomer reactivity ratios for the copolymerization of NMMI (M₂) with Sty (M₁) and MMA (M₁) were r₁ = 0.08 ± 0.10, r₂ = 0.20 ± 0.05 and r₁ = 2.85 ± 0.06, r₂ = 0.07 ± 0.06, respectively. Copoly-MMA–NMMI and poly-NMMI showed positive circular dichroism(CD) curves of equal intensity and shape over the wavelength region from 230 to 270 nm; copoly-Sty–NMMI also showed a positive CD curve which was similar in shape but was different in intensity from that of poly-NMMI. The correlation between monomer unit ellipticity of the copolymers and their composition would suggest the alternating and stereoregular copolymerization of NMMI with Sty.     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Reactivity ratios and sequence structures of the copolymers prepared using photo‐induced copolymerization of MMA with MTMP

4‐Methacryloyl‐2,2,6,6‐tetramethyl‐piperidine (MTMP) was applied as reactive hindered amine piperidine. Photo‐induced copolymerization of methyl methacrylate (MMA, M₁) with MTMP (M₂) was carried out in benzene solution at ambient temperature. The reactivity ratios for these monomers were measured by running a series of reactions at various feed ratios of initial monomers, and the monomer incorporation into copolymer was determined using ¹H NMR. Reactivity ratios of the MMA/MTMP system were measured to be r₁ = 0.37 and r₂ = 1.14 from extended Kelen‐Tüdos method. The results show that monomer MTMP prefers homopolymerization to copolymerization in the system, whereas monomer MMA prefers copolymerization to homopolymerization. Sequence structures of the MMA/MTMP copolymers were characterized using ¹H NMR. The results show that the sequence structure for the main chain of the MMA/MTMP copolymers is mainly composed of a syndiotactic configuration, only with a little heterotactic configuration. Three kinds of the sequences of rr, rr′, and lr′ in the syndiotactic configuration are found. The sequence‐length distribution in the MMA/MTMP copolymers is also obtained. For f₁ = 0.2, the monomer unit of MMA is mostly separated by MTMP units, and for f₁ = 0.6, the alternating tendency prevails and a large number of mono‐sequences are formed; further up to f₁ = 0.8, the monomer unit of MTMP with the sequence of one unit is interspersed among the chain of MMA. Copyright © 2012 John Wiley & Sons, Ltd.     

N-vinylpyrrolidone and 4-vinyl Benzylchloride Copolymers: Synthesis,Characterization and Reactivity Ratios

The copolymers prepared in this study by free radical copolymerization of N-vinylpyrrolidone (M ₂) with 4-vinylbenzylchloride (M ₁) using 2,2′-azobisisobutyronotrile (AIBN) initiator in 1,4-dioxane solvent at 70°C were characterized by FTIR, ¹H-NMR and ¹³C-NMR techniques. Polymer solubility was tested in both polar and nonpolar solvents. The thermal properties were studied by thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC). Copolymer compositions were established by H¹-NMR spectra, while reactivity ratios of the monomers were computed using the linearization methods viz., Fineman-Ross (FR) (r ₁ = 1.67 and r ₂ = 0.67), Kelen-Tudos (KT) (r ₁ = 1.77 and r ₂ = 0.65) and extended Kelen-Tudos (EK-T) (r ₁ = 1.72 and r ₂ = 0.63) methods at lower conversion. Furthermore, reactivity ratios in nonlinear error-in-variables method (RREVM) also compute the reactivity ratios (r ₁ = 1.76 and r ₂ = 0.66); these are found to be in good agreement with each other. The distribution of monomer sequence along the copolymer chain was calculated using a statistical method based on the calculated reactivity ratios.     

Free Radical Copolymerization of N‐(4‐Carboxyphenyl)maleimide with Hydropropyl Methacrylate

Abstract

The free radical copolymerization of N‐(4‐carboxyphenyl)maleimide (CPMI) (M₁) with hydropropyl methacrylate (HPMA) (M₂) was carried out with 2,2′‐azobis(isobutyronitrile) (AIBN) as an initiator in ethyl acetate at 75°C. The composition of copolymer prepared at low conversion was determined by elemental analysis. The monomer reactivity ratios were found to be r ₁?=?0.31 and r ₂?=?1.11 as determined by the YBR equation. The number‐average molecular weight and polydispersity were determined by gel permeation chromatography (GPC). Furthermore, the solvent effect on this copolymerization system was also investigated. The resulting copolymer was characterized by FTIR and ¹H‐NMR spectroscopy. The thermal stability of copolymers was determined by thermogravimetric analysis (TGA). It was found that the copolymer shows step‐by‐step degradation, the initial decomposition temperature (T _i), and final decomposition temperature (T _f) increased with increasing the component of CPMI in copolymer.     

Copolymers of 4‐(3′,4′‐Dimethoxycinnamoyl)phenyl Acrylate and MMA: Synthesis,Characterization, Photocrosslinking Properties,and Monomer Reactivity Ratios

Abstract

4‐(3′,4′‐Dimethoxycinnamoyl)phenyl acrylate (DMCPA) containing pendant chalcone moiety was copolymerized with methyl methacrylate (MMA) by radical polymerization in ethyl methyl ketone at 70°C under a nitrogen atmosphere using benzoyl peroxide (BPO) as a free radical initiator. The prepared polymer was characterized by UV, FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The composition of the copolymer was determined using ¹H‐NMR analysis. The monomer reactivity ratios of copolymerization were determined using conventional linearization methods such as Fineman–Ross (r ₁ = 0.26 and r ₂ = 0.61), Kelen–Tudos (r ₁ = 0.26 and r ₂ = 0.61), and Ext. Kelen–Tudos (r ₁ = 0.23 and r ₂ = 0.59), and a non‐linear error‐in‐variables model (EVM) method using the computer program RREVM (r ₁ = 0.2541 and r ₂ = 0.6094). The molecular weights (M _w and M _n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers in air reveals that the stability of the copolymers decreases with an increase in the mole fraction of MMA in the copolymers. The solubility of the polymers was tested in various polar and non‐polar solvents. The glass transition temperature of the copolymers was determined as a function of copolymer composition. The copolymers were sensitive to UV light and became crosslinked after irradiation with 254 nm light.     

Microstructural characterization of acrylonitrile/pentyl acrylate copolymers by one and 2‐D NMR spectroscopy

Acrylonitrile/pentyl acrylate (A/P) copolymers of different monomer composition were prepared by solution polymerization using benzoyl peroxide as initiator. Copolymer compositions were determined by elemental analysis and quantitative ¹³C¹H‐NMR spectroscopy. The comonomer reactivity ratios, determined by both Kelen Tudos (KT) and nonlinear error in variables (EVM) methods are r_A = 0.75 and r_p = 0.45. 2‐D heteronuclear correlation spectroscopy (HSQC) was used to simplify the complex ¹H spectra of A/P copolymers in terms of configurational and compositional sequences. The microstructure was obtained in terms of the distribution of A‐ and P‐ centered triad sequences from ¹³C¹H‐NMR spectra of the copolymers. The copolymerization mechanism was found to follow a first order Markov Model. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 533–543, 1999     

Synthesis and characterization of cationic copolymers of butylacrylate and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride

Cationic copolymers of butylacrylate (BA) and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride (MAPTAC) were synthesized by free‐radical‐solution polymerization in methanol and ethanol. An FT‐Raman Spectrometer and NMR were used to monitor the polymerization process. The copolymers were characterized by light scattering, NMR, DSC, and thermogravimetric analysis. It was found that random copolymers could be prepared, and the molar fractions of BA and cationic monomers in the copolymers were close to the feed ratios. The copolymer prepared in methanol had a higher molecular weight than that prepared in ethanol. As the cationic monomer content increased, the glass‐transition temperature (T_g) of the copolymer also increased, whereas the thermal stability decreased. The reactivity ratios for the monomers were evaluated. The copolymerization of BA (M₁) with MAPTAC (M₂) gave reactivity ratios such as r₁ = 0.92 and r₂ = 2.61 in ethanol as well as r₁ = 0.79 and r₂ = 0.90 in methanol. This study indicated that a random copolymer containing a hydrophobic monomer (BA) and a cationic hydrophilic monomer (MAPTAC) could be prepared in a proper polar solvent such as methanol or ethanol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1031–1039, 2001     

Relationship between Reactivity Ratios and Configuration for Donor—Acceptor Type Copolymers

For binary copolymers from an acrylic monomer (acceptor type, M¹) and an aromatic-substituted monomer (donor type, M₂) a linear relation between log (r₂/r¹) and the probability of “coisotactic” alternating addition is observed. This can be a proof for the influence of monomer polarity on the copolymer configuration.     

On the microstructure of methyl acrylate-4-vinyl pyridine copolymers

Using ¹H-NMR spectra of radical copolymers of methyl acrylate (M₁) and 4-vinyl pyridine (M₂), the terminal model of copolymerization has been tested. Reactivity ratios (r₁ = 0.18 r₂ = 1.77) were found. The probability of “coisotactic” alternating addition (σ = 0.98) has been obtained as the best fit of experimental methoxy signal fractions and the theoretical curves.     

Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization

Styrene (S) and glycidyl methacrylate (GMA) copolymers were synthesized by atom transfer radical polymerization (ATRP) under different conditions. The effect of initiators, ligands, solvents, and temperature to the linear first-order kinetics and polydispersity index (PDI) was investigated for bulk polymerization. First-order kinetics was observed between linearly increasing molecular weight versus conversion and low polydispersities (PDI) were achieved for ethyl 2-bromo isobutyrate (EBiB) as an initiator and N,N′,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst. The copolymers with different compositions were synthesized using different in-feed ratios of monomers. Copolymers composition was calculated from ¹H NMR spectra which were further confirmed by quantitative ¹³C{¹H} NMR spectra. The monomer reactivity ratios were obtained with the help of Mayo-Lewis equation using genetic algorithm method. The values of reactivity ratios for glycidyl methacrylate and styrene monomers are r_G = 0.73 and r_S = 0.42, respectively.     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Radical copolymerization behavior of a highly fluorinated cyclic olefin with vinyl ether

The copolymerization of a highly fluorinated cyclic monomer, octafluorocyclopentene (OFCPE, M₁), with ethyl vinyl ether (EVE, M₂) was investigated with a radical initiator in bulk. Despite the poor homopolymerizability of each monomer, the copolymerization proceeded successfully, and the molecular weights of the copolymers reached up to more than 10,000. Incorporation of the OFCPE units into the copolymer led to an increase in the glass‐transition point. The copolymer composition was determined from ¹H NMR spectra and elemental analysis data. The molar fraction of the OFCPE unit in the copolymer increased and approached but did not exceed 0.5. The monomer reactivity ratios were estimated by the Yamada–Itahashi–Otsu nonlinear least‐squares procedure as r_1,OFCPE = ?0.008 ± 0.010 and r_2,EVE = 0.192 ± 0.015. The reactivity ratios clearly suggest that the copolymerization proceeds alternatively in the case of an excessive feed of OFCPE. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1151–1156, 2002