Surface Heparinization of Poly(ether ether ketone)

Photo-grafting of hydrophilic monomer and space arms was used to enhance the hydrophilicity of poly(ether ether ketone)(PEEK) with the aim of extending its application to biological fields. PEEK films were surface modified by UV grafting of acrylic acid(AA) to introduce ―COOH on PEEK surface. Adipic amine was used as a space arm to introduce heparin on PEEK surface based on the condensation reaction between ―NH₂ and ―COOH. The modified PEEK(PEEK-COOH, PEEK-NH₂ and PEEK-Hep) was characterized by energy-disperse spectroscopy (EDS), X-ray photoelectron spectroscopy(XPS) and water contact angle measurements, which show that heparin was grafted on PEEK surface. The contact angles of modified PEEK films were lower than those of original films, demonstrating a significant improvement of surface hydrophilicity.     

Immobilization of Bovine Serum Albumin on Poly(ether ether ketone)for Surface Biocompatibility Improvement

UV-induced graft polymerization of acrylic acid(AA)on poly(ether ether ketone)(PEEK)films was carried out to introduce-COOH for the subsequent immobilization of bovine serum albumin(BSA).BSA was introd...     

UV-induced Self-initiated Graft Polymerization of Acrylamide onto Poly(ether ether ketone)

Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly(ether ether ketone) (PEEK) with the aim of extending its applications to biological fields. PEEK sheets were surface modified by grafting of acrylamide(AAm) with ultraviolet(UV) irradiation in the presence or absence of benzophenone(BP). The effects of BP, irradiation time and monomer concentration on the surface wettability of PEEK were investigated. Characterization of modified PEEK using scanning electron microscopy(SEM), energy-disperse spectrometer(EDS) and water contact angle measurements shows that AAm was successfully grafted on PEEK surface both in presence and absence of BP. With the increase in irradiation time and monomer concentration, contact angles decrease to as low as 30°, demonstrating a significant improvement of surface hydrophilicity. In agreement with the decrease in contact angle, under identical conditions, the nitrogen concentration increases, suggesting the increase in grafting degree of the grafting polymerization. This investigation demonstrates a self-initiation of PEEK due to its BP-like structure in the backbone of the polymer. Though the graft polymerization proceeds more readily in the presence of BP, the self-initiated graft polymerization is clearly observed.     

Dynamic relaxation behavior of solvent-crystallized poly(ether ether ketone)

The dynamic relaxation behavior of solvent-crystallized poly(ether ether ketone) (PEEK) has been investigated in the region of the glass-rubber (α) relaxation using dynamic mechanical and dielectric methods. Amorphous PEEK films were exposed to saturated methylene chloride and acetone vapor, with solvent-induced crystallization observed for both penetrants. Sample desorption at elevated temperatures (under vacuum) resulted in virtually complete removal of residual penetrant, thus providing for the measurement of relaxation characteristics independent of plasticization. Both dynamic mechanical and dielectric studies indicated a marked positive offset in the isochronal relaxation temperatures of the solvent-crystallized samples relative to thermally crystallized specimens of comparable bulk crystallinity, and a higher apparent activation energy in the solvent-crystallized case. These results are consistent with the evolution of a tighter crystalline morphology (i.e., smaller crystal long spacing) in the solvent-crystallized samples, the crystallites imposing a greater degree of constraint on the long-range motions of the amorphous chains inherent to the glass-rubber relaxation. © 1994 John Wiley & Sons, Inc.     

Photochemically Cross‐linked Poly(aryl ether ketone) Rings

Summary: Macrocyclic phenyl ether ketones were prepared via pseudo high dilution condensation. Irradiation of these rings with UV light in a solution containing isopropyl alcohol as hydrogen donor resulted in a photo‐induced reduction of benzophenone to benzopinacol and the formation linked macrocycles. These rings can be heated to undergo ring‐opening polymerization and produce a polymer network or they can be added to a polycondensation reaction to prepare poly(ether ether ketones) with variable degrees of cross‐linking.

Photochemical cross‐linking of PEK rings and ring opening polymerization (n: 2–6). (a) hν, iPrOH, DCM; (b) CsF, 260 °C (polymer 3 ); (c) 4,4′–difluorobenzophenone, hydroquinone, diphenylsulphone, K₂CO₃, 260 °C (2% polymer 4 ; 6% polymer 5 ).     

聚醚醚酮酮和含联苯聚醚醚酮酮共聚物的熔融热

根据Ｆｌｏｒｙ热力学统计理论和比容－熔融热作国法，由ＤＳＣ结果得到了不同联苯含量的聚醚醚酮酮－含联苯聚醚醚酮酮（ＰＥＥＫＫ－ＰＥＢＥＫＫ）共聚物的熔融热，两种方法获得的结果吻合。在此基础上给出了ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物不同联苯含量的熔点计算表达式。结果还表明，随着联苯含量ｎＢ，的变化，明显改变；当ｎＢ＝０．３５时，ＰＥＥＫＫＰＥＢＥＫＫ共聚物的值最小。     

聚醚醚酮/聚醚醚酮酮共混体系的熔融和等温结晶行为

采用熔融共混方法制备了聚醚醚酮和聚醚醚酮酮的共混物,用DSC对共混物的熔融行为和等温结晶行为进行了研究.结果表明,共混物熔点随聚醚醚酮含量增加而降低,但与聚醚醚酮酮有相同的平衡熔点,二者共混没有改变其结晶的成核与生长机制.     

新型可溶性含氟聚芳醚酮的合成、表征及性能

制备了新型可溶性含氟聚芳醚酮高性能材料, 使该材料结合了含氟聚合物与聚芳醚酮两种材料的优点, 既具有很好的热稳定性、溶解性和阻燃性, 又有较低的介电常数和吸湿性[5,9,10]. 对于提高聚芳醚酮类材料的性能, 拓展其使用范围和加工方法具有很大的开发前景和实用价值.     

Surface modification of poly(aryl ether ether ketone) (PEEK) film by covalent coupling of amines and amino acids through a spacer arm

Using the wet-chemistry technique, we selectively reduced the surface of the PEEK film (PEEK-OH), and covalently fixed hexamethylene diisocyanate by addition onto the hydroxyl functions. The resulting PEEK-NCO film displayed free isocyanate termini, the basic hydrolysis of which gave the PEEK-NH₂ film in 85% extent of derivatization. The PEEK-NCO film reacted with trifluoroethylamine in toluene, trifluoroethylamine in PBS buffer, GABA, and lysine in PBS buffer to furnish, respectively, the PEEK-CF₃(A), PEEK-CF₃(B), PEEK-CO₂H, and PEEK(NH₂)CO₂H films in 80%, 45%, 30%, and 25% extents of derivatization, as determined from the F/C and N/C atomic ratios recorded in the corresponding XPS spectra. The surface reactivity of the PEEK-NH₂ and PEEK-NCO films was assayed by coupling with appropriate ³H labels followed by liquid scintillation counting of the sample-associated radioactivity. The PEEK-NH₂, PEEK-CO₂H, and PEEK-(NH₂)CO₂H films were used as substrates for the cultivation of CaCo₂ epithelial cells; the presence of surface amine and carboxyl functions significantly improves the cellular adhesion and growth. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3779–3790, 1997     

聚醚醚酮醚酮的合成与表征

聚醚醚酮（ＰＥＥＫ）自工业化以来［１］，由于其优异的性能已在机械、航天等领域得到广泛应用．各种聚芳醚酮类聚合物相继被开发出来．但以亲电缩聚路线制备聚醚醚酮醚酮（ＰＥＥＫＥＫ）的报道较少［２］．本文以二苯醚和４－氟苯甲酰氯为主要反应试剂，采取付氏酰基化...     

新型可溶性聚芳醚酮的合成与表征

聚芳醚酮是一类具有独特的耐热性、耐疲劳性、耐辐射性、化学稳定性、阻燃性和介电性等诸多优异性能的工程塑料 ,广泛应用于航天、军事、电子、信息、核能和精密仪器等领域[1,2 ] .具有不同性质并有不同应用特性的聚芳醚酮的研究已有报道 [3～ 8] .将甲基、苯基和叔丁基等不同取代基引入到聚芳醚酮中可提高溶解性 ,改善加工性能 ,其中引入一些功能型侧基也可实现聚芳醚酮的功能化 .我们合成了一种含甲苯取代基的新型聚芳醚酮 ,大侧基的引入含影响到玻璃化转变温度 ( Tg)、结晶性和介电性能 ,可改善溶解性、成膜性及加工流动性等诸多性能 .…     

含联苯结构聚醚醚酮酮共聚物和共混物的制备及性能研究

聚醚醚酮（PEEK）是八十年代初投入市场的全芳香结构热塑性耐高温特种工程塑料，它的7’。一143“C，Tm一334C“‘，最大结晶度为48％，典型制品结晶度为20％～30％［”．PEEK可用通常的设备成型，其制件、纤维、涂料及复合材料在电子电器、机械设备、交通运输、宇航、原子能工程、军事等领域有广泛的用途［’j．聚醚醚酮酮（PEEKK）是继PEEK之后，由德国Hoechst公司开发出来的又一种全芳香结构热塑性耐高温特种工程塑料［‘j．为了研究该类聚合物的结构和性能的关系，我们在实验室中合成了PEEKK和含联苯结构聚醚醚酮酮（PE－＊…     

Analysis of crystallization kinetics of poly(ether ether ketone)

An optical microscope equipped with a video photograph system was used to follow the growth of spherulites. Under nitrogen atmosphere, the growth rates at 290 and 300°C suggest that when the melt of PEEK has been equilibrated for 15 min at 400°C, the subsequent crystallization behavior was nearly independent of the prior thermal history. Linear growth rates of crystallization of PEEK have been measuredin the temperature range of 260–325°C for melt-pressed films and solvent cast films. Detailed kinetic analysis indicated that PEEK exhibited an unmistakable regime II → III transition at 296 ± 1°C. The II → III transition was clearly present irrespective of the rather drastic changes in U*. It is interesting that the branching and crosslinking retarded the growth rate of PEEK, but a transition from regime II to regime III still existed. For melt-pressed films after equilibration at 400°C for 15 min, values of σ and q suggest that U* should be taken nearer to 1500 cal/mol in the case of T_∞ = T_g − 30 K and 2000 cal/mol in the case of T_∞ = T_g − 51.6 K. The K_g(III)/K_g(II) ratio (1.32) was not as close to the predicted value of 2 as was Hoffman's ratio. For PEEK, the Thomas-Staveley constant (β) should be closer to 0.25 or 0.3 instead of 0.1. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1335–1348, 1998     

Melting behavior of poly(ether ether ketone) in its blends with poly(ether imide)

We detail the melting behavior of poly(ether ether ketone) (PEEK) and investigate its melting behavior in miscible blends with poly(ether imide) (PEI). The determination of the equilibrium melting point (T_m⁰) of PEEK is discussed by considering its inhomogeneous morphology. T_m⁰ is obtained by a long extrapolation of a Hoffman–Weeks plot to 384°C. Hindrance of PEEK crystal reorganization induced by PEI during heating is observed over the blend composition investigated (20–75 wt % PEEK). This behavior is correlated with the incorporation of PEI in the interlamellar zones of PEEK crystals. The interaction parameter χ of PEEK/PEI blends is estimated by the equilibrium melting point depression. This gives the interaction density B = ?1.2 cal/cm³, and x = ?0.40 at 400°C. © 1993 John Wiley & Sons, Inc.     

聚芳醚酮醚酮酮类聚合物的结晶与多晶型

晶体结构;聚芳醚酮醚酮酮类聚合物的结晶与多晶型     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

聚醚醚酮表面的亲水改性和胶原蛋白固定化

采用紫外光接枝法对聚醚醚酮(PEEK)表面进行化学修饰和生物分子固定化.首先向PEEK表面引入亲水性的丙烯酰胺,并以此为反应位点通过戊二醛将胶原和胶原蛋白固定在PEEK表面.用接触角测定仪、扫描电镜、荧光标记和X射线光电子能谱等对改性薄膜进行了表征.结果表明,PEEK上丙烯酰胺的接枝密度高达50.9μg/cm~2;改性薄膜表面浸润性显著提高,水接触角最低降至(22±3)°.荧光标记胶原固定的PEEK薄膜荧光发射光谱强度最高,并在X射线光电子能谱中检测到N元素,表明胶原已固定化,固定胶原蛋白的浓度为10.2μg/cm~2.     

Functionalization of poly (aryl ether ether ketone): Synthesis of bromomethylated PEEK and its functionalization

Bromomethyl poly (aryl ether ether ketone) has been prepared from methyl poly (aryl ether ether ketone) (MePEEK) and has been used as the precursor to many forms of functionalized PEEK. MePEEK was brominated directly with bromine. Bromination takes place exclusively at the methyl group. The reaction conditions for bromination have been studied. The bromination level can be controlled by the amount of bromine used, up to 90% of the methyl groups can be brominated to mono-bromo and di-bromo methyl PEEK. Modification reactions have been carried out on the brominated methyl PEEK. The bromomethyl group has been converted to different functional groups, such as ? CH₂OH, ? CH₂OCH₃, ? COOCH₃, ? CH₂CN, ? CH₂COOH ? CH₂OCOCH₃, ? CH₂N⁺H (CH₂CH₃)₂Br^?, ? CH₂N (CH₂CH₃)₂, ? CH₂N⁺ (CH₂CH₃)₃ Br^?. Published 1994 John Wiley & Sons, Inc.     

含三苯基膦聚醚醚酮酮的结构与性能

以双[4-(对氟苯甲酰基)苯基]苯基氧化膦和对苯二酚(HQ)为单体, 合成了新型主链含三苯基膦结构的聚醚醚酮酮, 并对聚合物的结构和性能进行了表征.