Capillary zone electrophoresis separation of enantiomers of lisuride

Lisuride is an ergot alkaloid derivative with dopaminergic activity. It is used for treatment of Parkinsonism and some other diseases associated with high level of prolactine. Lisuride is a chiral compound derived from natural ergot alkaloids. A new capillary zone electrophoresis (CZE) method capable of separating the enantiomers of lisuride was developed. Using the optimized conditions (acidic electrolyte with the addition of gamma-cyclodextrin (gamma-CD)) as low as 0.02% of undesirable L-lisuride can be detected. Selected method characteristics, i.e., linearity (0-20 mg/l), precision (2.0% at 5 mg/I), and accuracy (101 +/- 4% at 5 mg/l) were evaluated. The optimized method was applied for the analysis of real batches of Lisuride hydrogenmaleate and Lisuride base manufactured by IVAX Pharmaceuticals. It was found that they contain less than 0.02% of undesirable L-enantiomer.     

Preparative enantioseparation of propafenone by counter‐current chromatography using di‐n‐butyl l‐tartrate combined with boric acid as the chiral selector

This paper extends the research of the utilization of borate coordination complexes in chiral separation by counter‐current chromatography (CCC). Racemic propafenone was successfully enantioseparated by CCC with di‐n‐butyl l ‐tartrate combined with boric acid as the chiral selector. The two‐phase solvent system was composed of chloroform/ 0.05 mol/L acetate buffer pH 3.4 containing 0.10 mol/L boric acid (1:1, v/v), in which 0.10 mol/L di‐n‐butyl l ‐tartrate was added in the organic phase. The influence of factors in the enantioseparation of propafenone were investigated and optimized. A total of 92 mg of racemic propafenone was completely enantioseparated using high‐speed CCC in a single run, yielding 40–42 mg of (R)‐ and (S)‐propafenone enantiomers with an HPLC purity over 90–95%. The recovery for propafenone enantiomers from fractions of CCC was in the range of 85–90%.     

N-(2-甲基-6-乙基苯基)丙氨酸对映体的毛细管电泳分离

采用高效毛细管区带电泳法,以β-环糊精及其衍生物作为手性选择剂,对外消旋N-(2-甲基-6-乙基苯基)丙氨酸(EMPA)的两个对映体进行了手性分离,比较了环糊精种类、环糊精浓度、电解质溶液pH值、温度和电场强度对分离的影响.实验结果表明,采用2,6-O-二甲基-β-环糊精为手性选择试剂,环糊精浓度为40mmol/L、电解质溶液pH=5.5及温度为20℃时分离效果最佳,对映体基本达基线分离,线性范围为20～200mg/L,最低检测限为10mg/L.     

Enantiomeric separation of glycidyl tosylate by CE: Application to the study of catalytic asymmetric epoxidation of allyl alcohol

A CE method using CDs as chiral selectors was developed and validated to achieve the separation of glycidyl tosylate enantiomers originated by in situ derivatization of glycidol enantiomers obtained in asymmetric epoxidation of allyl alcohol with chiral titanium‐tartrate complexes as catalysts. The effects of the nature, pH and concentration of the buffer, the nature and concentration of chiral selector, the addition of SDS, methanol, ethanol or 2‐propanol, the capillary temperature, the effective capillary length and the applied voltage on the chiral resolution of glycidyl tosylate enantiomers were investigated. The best separation conditions were achieved using a Tris‐borate buffer mixture (50 and 25 mM, respectively) at pH=9.3 with a dual CD system consisting of 2.5% succinyl‐β‐CD and 1.0% β‐CD w/v at 15°C. A baseline separation (resolution～2.0) of the glycidyl tosylate enantiomers was obtained in a relatively short time (less than 12 min). Satisfactory results were obtained in terms of linearity (r>0.99) and intermediate precision (RSD below 8.5%). The LOD and LOQ were 3.0 and 10.0 mg/L, respectively, and the recoveries ranged from 99.8 to 108.8%. Finally, the method was applied to the determination of the enantiomeric excess and the yield obtained in the asymmetric epoxidation of allyl alcohol employing chiral titanium‐tartrate complexes as catalysts after an in situ derivatization of glycidol enantiomers to glycidyl tosylate.     

Liquid chromatographic method development for determination of fungicide epoxiconazole enantiomers by achiral and chiral column switching technique in water and soil

High-performance liquid chromatography (HPLC) in both chiral isocratic and achiral-chiral column switching mode was employed for optimization of separation conditions, separation and determination of fungicide epoxiconazole in real samples. Two enantiomers of commercially available triazole fungicide epoxiconazole (BAS 480 F), first registered in 1993, were resolved for the first time on a microcrystalline cellulose triacetate (MCTA). A low-cost home-packed chiral column (150x3 mm, 15-25 microm, MCTA, Merck) enabled baseline enantiomeric resolution of two enantiomers of the fungicide epoxiconazole produced commercially. The effects of concentration of organic modifiers (methanol, ethanol) in mobile phase, flow-rate and temperature were studied. The isocratic chiral HPLC method allows determination of the enantiomers in tap and surface water within the range 1-1000 mg/l by direct injection (20 microl) of the sample. Using the achiral (C18)-chiral (MCTA) column-switching technique and 1-ml sample volume, injection of 0.050 mg/l of epoxiconazole enantiomers can be conveniently determined by UV detection at 230 nm. The same method applied to methanolic soil extracts allows determination of 0.2 mg/kg of epoxiconazole enantiomers in addition to the other 10 commonly used pesticides in fortified soils.     

Enantiomeric separation and determination of the enantiomeric impurity of armodafinil by capillary electrophoresis with sulfobutyl ether-β-cyclodextrin as chiral selector

A selective capillary electrophoresis method using sulfobutyl ether-β-cyclodextrin as a chiral selector was developed and validated for the determination of the enantiomeric impurity of (R)-modafinil, i.e., armodafinil. Several parameters were optimized for a satisfactory enantioresolution, including the type and concentration of chiral selector and organic modifier, pH of background electrolyte (BGE), capillary temperature. The finally adopted condition was: 20 mmol/L phosphate buffer at pH 7.5, containing 20 mmol/L sulfobutyl ether-β-cyclodextrin and 20% methanol, at temperature of 25 °C. A good resolution of 3.3 for the two enantiomers of modafinil was achieved by applying the optimal conditions. The limit of detection (LOD) and limit of quantification (LOQ) of (S)-modafinil were 1.25 μg/mL and 2.50 μg/mL, respectively. The established method was also proven to display good selectivity, repeatability, linearity and accuracy. Finally, the method was used to investigate the enantiomeric purity of armodafinil in bulk samples.     

Chiral analysis of UV nonabsorbing compounds by capillary electrophoresis using macrocyclic antibiotics: 1. Separation of aspartic and glutamic acid enantiomers

Glycopeptide antibiotics, namely vancomycin or teicoplanin, were evaluated in capillary electrophoresis for the analysis of UV nonabsorbing compounds such as aspartic and glutamic acid enantiomers. Electrophoretic runs were performed in laboratory-made polyacrylamide-coated capillaries using the partial filling-counter current method in order to avoid the presence on the detector path of the absorbing chiral selector. The background electrolyte consisted of an aqueous or aqueous-organic buffer in the pH range of 4.5-6.5 of sorbic acid/histidine and the appropriate concentration of chiral selector. Several experimental parameters such as antibiotic concentration and type, buffer pH, organic modifier, type and concentration of absorbing co-ion (for the indirect UV detection) were studied in order to find the optimum conditions for the chiral resolution of the two underivatized amino acids in their enantiomers. Among the two investigated chiral selectors, vancomycin resulted to be the most useful chiral selector allowing relatively high chiral resolution of the studied compounds even at low concentration. The optimized method (10 mM sorbic acid/histidine, pH 5, and 10 mM of vancomycin) was used for the analysis of real samples such as teeth dentine and beer.     

Enatiomeric analysis of simendan by CE with beta-CD as chiral selector compared with CMPA-HPLC

The chiral separation of simendan enantiomers using capillary electrophoresis was studied with beta-cyclodextrin (beta-CD) as chiral selector. The influences of the concentration and pH of borate buffer solution, beta-CD concentration and methanol content in the background electrolyte were investigated. These factors were compared with those in an HPLC with beta-CD as chiral mobile phase additive (CMPA-HPLC). The quantification properties of the developed CE method were examined. A baseline separation of simendan enantiomers was achieved in the background electrolyte of 20 mmol/L borate buffer (pH 11.0) containing 12 mmol/L beta-CD-methanol (50:50 in volume ratio). The CE method is comparable with CMPA-HPLC in chiral resolution, although the optimal pH in CE (11.0) is much higher than that (6.0) in CMPA-HPLC. This chiral CE method is applicable to the quantitative ananlysis and enantiomeric excess value determination of L-simendan.     

Chiral capillary electrophoresis applied to the determination of phenylglycidol enantiomers obtained from cinnamyl alcohol by asymmetric epoxidation using new titanium(IV) alkoxide compounds as catalysts

A capillary electrophoresis method for the simultaneous determination of phenylglycidol enantiomers in the presence of an excess of cinnamyl alcohol was developed. The effects of the nature, pH and concentration of the buffer, the nature and concentration of chiral selector, the addition of methanol or acetonitrile, and the capillary temperature on the chiral resolution of phenylglycidol enantiomers were studied. Separations were achieved using 20 mM succinylated beta-cyclodextrin dissolved in a 10 mM borate buffer (pH 10.0). Chiral resolution for the phenylglycidol enantiomers in the optimized electrophoretic conditions was higher than 2.0 with an analysis time less than 7 min. The method developed was validated in terms of selectivity, linearity, precision (instrumental repeatability, method repeatability, intermediate precision), the limits of detection and quantitation, and accuracy. Limits of detection of 6.5 mg/L and 8.3 mg/L for (2S,3S)-(-)-3-phenylglycidol ((S,S)-PG) and (2R,3R)-(+)-3-phenylglycidol ((R,R)-PG), respectively, were obtained. The method was applied to study the asymmetric epoxidation of cinnamyl alcohol with titanium(IV) alkoxide compounds as catalysts in order to evaluate their catalytic activity and stereoselectivity of the epoxidation processes.     

Application of carboxymethyl-beta-cyclodextrin as a chiral selector in capillary electrophoresis for enantiomer separation of selected neurotransmitters

The aim of this work was to optimize conditions for capillary electrophoresis separation of different neurotransmitters (serotonin, phenylalanine, dopamine, adrenaline, ephedrine, propranolol and DOPA) in a single run, including separation of existing enantiomers. As chiral selectors added to the borate background, electrolyte unsubstituted alpha-, beta- and -gamma-cyclodextrins (CDs), methyl-, dimethyl-, and trimethyl-substituted beta-CDs, and hydroxypropyl-substituted alpha-, beta- and gamma-CDs were examined. Also carboxymethyl-beta-CD and succinyl-beta-CD were used for this purpose. In addition to the kind and concentration of chiral selector, some other experimental factors also have been optimized, such as concentration of borate buffer, content of methanol, pH of electrolyte, method of sample introduction into the capillary and washing procedure between consecutive runs. The best results were obtained using 20 mM carboxymethyl-beta-CD in borate buffer of pH 7.5 as running electrolyte and hydrostatic injection. The obtained sensitivity of response (peak height) varied from 0.4 for adrenalines to 2.3 mAU mM(-1) for propranolols. The concentration detection limits (S/N=3) were in the range from 0.04 mM for propranolols to 0.2 mM for adrenalines. The resolution obtained in optimized conditions in a single run was from 0.75 for adrenalins and 1.0 for propranolols up to 2.0 for ephedrines. The developed method was employed for determination of these analytes in brain tissue extracts.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Enantioselective resolution of chiral aromatic acids by biphasic recognition chiral extraction

This paper reports a new chiral separation technology—biphasic recognition chiral extraction for the separation of aromatic acid enantiomers such as α-cyclohexyl-mandelic acid (CHMA) and naproxen (NAP). The biphasic recognition chiral extraction system was established by adding hydrophobic d(l)-isobutyl tartrate in 1,2-dichloroethane organic phase and hydrophilic β-cyclodextrin (β-CD) derivative in aqueous phase, which preferentially recognize the (R)-enantiomer and (S)-enantiomer, respectively. These studies involve an enantioselective extraction in a biphasic system, where aromatic acid enantiomers form complexes with the β-cyclodextrin derivative in the aqueous phase and d(l)-isobutyl tartrate in the organic phase, respectively. Factors affecting the extraction mechanism are analyzed, namely the influence of the concentrations of the extractants and aromatic acid enantiomers, the types of the extractants, pH, and temperature. The experimental results show that the biphasic recognition chiral extraction is of much stronger chiral separation ability than the monophasic recognition chiral extraction, which utilizes the cooperations of the forces of the tartrate and the β-CD derivative. Hydroxypropyl-β-cyclodextrin (HP-β-CD), hydroxyethyl-β-cyclodextrin (HE-β-CD), and methyl-β-cyclodextrin (ME-β-CD) have stronger recognition abilities for the (S)-aromatic acid enantiomers than those for (R)-aromatic acid enantiomers, among which HP-β-CD has the strongest ability. d-Isobutyl tartrate preferentially recognizes (R)-CHMA and (S)-NAP, while l-isobutyl tartrate preferentially recognizes (S)-CHMA and (R)-NAP. The maximum enantioselectivities of CHMA and NAP are 2.49 and 1.65, under conditions at which the pH values of the aqueous phases are 2.7 and 2.5, at the ratio of 2:1 of [isobutyl tartrate] to [HP-β-CD].     

α-萘基缩水甘油醚对映体的毛细管区带电泳手性拆分

建立了毛细管区带电泳手性拆分α-萘基缩水甘油醚对映体的方法.考察了不同手性拆分试剂对手性选择性的影响,实验结果表明,20 mmol/L H3PO4-三乙醇胺(pH 2.5)、2%(w/V)HS-β-CD、毛细管温度20 ℃、运行电压-18 kV为最佳分离条件,在该分离条件下α-萘基缩水甘油醚对映体实现基线分离.方法简便、准确,可用于α-萘基缩水甘油醚的手性拆分和对映体过量值(ee,%)测定.     

Chiral separation of raltitrexed by cyclodextrin-modified micellar electrokinetic chromatography

A rapid and effective method was developed for the chiral separation of raltitrexed (RD) enantiomers by carboxymethyl-beta-cyclodextrin (CM-β-CD)-modified micellar electrokinetic chromatography (MEKC). Optimization of conditions including the type and concentration of the chiral selector, concentration of sodium dodecyl sulfate (SDS), pH and concentration of the background electrolyte (BGE), capillary temperature, and applied voltage was investigated. The enantiomers of raltitrexed could be separated with satisfactory resolution and linear response by using 75 mM Tris-phosphate at pH 8.0 containing 30 mM SDS and 8 mM CM-β-CD as buffer system. Furthermore, the usefulness of this method was demonstrated in a purity test of a real synthetic drug sample. Figure Chiral separation of raltitrexed by CM-β-CD MEKC was optimized and applied to test the purity of a synthetic drug sample     

Study of the enantioseparation of imazaquin and enantioselective degradation in field soils by CZE

A fast, simple, and sensitive CE method was developed to study the separation and degradation of imazaquin enantiomers in field soils. The parameters pH and concentration of the buffer electrolyte, type and concentration of the chiral selectors, applied voltage, and temperature of the CE system were investigated. Sodium hydrogen phosphate (50 mM) at pH 10.1 containing 30 mM hydroxypropyl-beta-CD (HP-beta-CD) was found to be the suitable BGE. The reliable determination for imazaquin enantiomers was obtained at 20 kV applied voltage, 15 degrees C separation system, and detection at 214 nm. Under the optimal conditions, the LODs (S/N = 3) were 0.0097 and 0.0098 mg/kg; linearity ranged from 0.019 to 1.24 and 0.020 to 1.26 mg/kg for the first-eluting peak of imazaquin (imazaquin-I) and the second-eluting peak of imazaquin (imazaquin-II) in soil, respectively. The precision in terms of the percentage of RSD (%RSD) calculated from peak area was not greater than 5%. With the suitable characteristics of the present method, it was applied to the study of enantioselective degradation in field soil. According to the calculated values of the enantiomer ratio (ER) and the rate constant of degradation (k), the results suggested that the degradation rate of the two enantiomers were slightly different, and that the pH of the soil had a strong influence on the rate of degradation.     

HPLC with polysaccharide chiral stationary phase in polar‐organic phase mode: Application to the asymmetric epoxidation of allylic alcohols

A simple and rapid HPLC method using a polysaccharide‐based chiral stationary phase (Chiralpak AD‐H) in polar‐organic phase mode has been developed for direct resolution of glycidyl nitrobenzoate (GNB) and 2‐methyl glycidyl nitrobenzoate (MGNB) enantiomers. ACN and methanol were used as mobile phase and the effects of the addition of ethanol and 2‐propanol as organic modifier in the mobile phase, flow rate and the column temperature were tested. The optimized conditions were: methanol/ethanol (80:20) at a flow rate of 0.9 mL/min and 40°C. Analysis time was ?13 min and the chiral resolution was ?2. The method was validated and resulted to be selective, precise and accurate. The method was found to be linear in 2–300 μg/mL range (R² >0.999) with an LOD nearly 0.5 μg/mL for four enantiomers. GNB and MGNB enantiomers were obtained by asymmetric epoxidation of allyl alcohol and 2‐methyl allyl alcohol, respectively, using chiral titanium–tartrate complexes as catalyst and dichloromethane as solvent after in situ derivatization of the intermediate glycidols derivatives. The quite simple and rapid validated method was applied successfully for direct determination of the enantiomeric excess (?90%) and yield obtained in real samples of asymmetric epoxidation of allylic alcohols without further purification, workup or solvent removal. The method provides a useful and value‐added tool for controlling the enantiomeric purity of the synthesized epoxides.     

Isotachophoretic determination of theanine

Free amino acids, the key quality components of tea, are contained in higher amounts in higher grade teas. Among free amino acids in tea, the content of theanine, which is the amino acid of the highest amount, shows high correlation to the price of green tea. A capillary isotachophoresis (CITP) method was developed for the analysis of L-theanine in tea and food supplements. The optimized electrolyte system was following: 0.01 mol/l HCl + 0.02 mol/l TRIS + 0.05% HEC (leading electrolyte), 0.01 mol/L-valine + barium hydroxide to pH 10 (terminating electrolyte). Good separation of L-theanine from other components of sample was achieved within 20 min. Method characteristics, i.e., linearity (0–200 mg/l), accuracy (99 ± 2 %), intra-assay (1.5 %), quantification limit (2 mg/l), and detection limit (0.7 mg/l) were determined. Sufficient sensitivity, low labouriousness (extraction only) and low running cost are important attributes of this method. It was proved that the developed method is suitable for the routine analysis of L-theanine in green tea and food supplements containing green tea extract.     

毛细管区带电泳对手性药物盐酸美西律和盐酸异博定的对映体分离

应用环糊精-毛细管区带电泳体系对手性药物盐酸美西律和盐酸异博定的对映体分离进行了研究。结果表明, 在所研究的手性选择剂α-环糊精, β-环糊精, 二甲基-β-环糊精, 羟丙基β-环糊精和γ-环糊精中, 羟丙基β-环糊精对所研究的手性药物分离效果较好。对盐酸美西律和盐酸异博定的最佳羟丙基-β-环糊精浓度分别为30mmol/L和9mmol/L, 最佳缓冲溶液浓度为100mmol/L Tris-H3PO4(pH2.3)。向缓冲溶液中加入0.05%羟丙基纤维素(HPLC)可改善分离。盐酸美西律获得了接近基线的手性分离, 而盐酸异博定亦获得了较好的分离。     

Two-chiral component microemulsion EKC - chiral surfactant and chiral oil. Part 2: diethyl tartrate

In this second study on dual-chirality microemulsions containing a chiral surfactant and a chiral oil, a less hydrophobic and lower interfacial tension chiral oil, diethyl tartrate, is employed (Part 1, Foley, J. P. et al.., Electrophoresis, DOI: 10.1002/elps.200600551). Six stereochemical combinations of dodecoxycarbonylvaline (DDCV: R, S, or racemic, 2.00% w/v), racemic 2-hexanol (1.65% v/v), and diethyl tartrate (D, L, or racemic, 0.88% v/v) were examined as pseudostationary phases (PSPs) for the enantioseparation of six chiral pharmaceutical compounds: pseudoephedrine, ephedrine, N-methyl ephedrine, metoprolol, synephrine, and atenolol. Average efficiencies increased with the addition of a chiral oil to R-DDCV PSP formulations. Modest improvements in resolution and enantioselectivity (alpha(enant)) were achieved with two-chiral-component systems over the one-chiral-component microemulsion. Slight enantioselective synergies were confirmed using a thermodynamic model. Results obtained in this study are compared to those obtained in Part 1 as well as those obtained with chiral MEEKC using an achiral, low-interfacial-tension oil (ethyl acetate). Dual-chirality microemulsions with the more hydrophobic oil dibutyl tartrate yielded, relative to diethyl tartrate, higher efficiencies (100,000-134,000 vs. 80,800-94,300), but lower resolution (1.64-1.91 vs. 2.08-2.21) due to lower enantioselectivities (1.060-1.067 vs. 1.078-1.081). Atenolol enantiomers could not be separated with the dibutyl tartrate-based microemulsions but were partially resolved using diethyl tartrate microemulsions. A comparable single-chirality microemulsion based on the achiral oil ethyl acetate yielded, relative to diethyl tartrate, lower efficiency (78 300 vs. 91 600), higher resolution (1.99 vs. 1.83), and similar enantioselectivities.     

Sodium maleopimaric acid as pseudostationary phase for chiral separations of amino acid derivatives by capillary micellar electrokinetic chromatography

A new type of chiral surfactant, sodium maleopimaric acid (SMA), was synthesized, and employed for the enantioselective micellar electrokinetic chromatographic (MEKC) separation of amino acid enantiomers derivatized with naphthalene-2,3-dicarboxaldehyde (NDA-D/L-AAs). The effect of the surfactant concentration, type and concentration of the BGE, and buffer pH on the resolution was studied, and optimized conditions were used to evaluate the ability of this new surfactant to perform chiral separations toward NDA-D/L-AAs by MEKC. Enantiomeric separations of NDA-D/L-AAs were achieved with a running buffer consisting of 100 mM borate (pH 9.5) and 20 mM SMA in a 58.5 cm length x 50 microm id capillary. Under the conditions selected, two pairs of tested amino acid enantiomers including NDA-D/L-trptophan (Trp) and NDA-D/L-kynurenine (Kyn) were resolved.