Equilibrium and non-equilibrium kinetics of self-assembled surfactant monolayers: a vibrational sum-frequency study of dodecanoate at the fluorite-water interface

The adsorption, desorption, and equilibrium monomer exchange processes of sodium dodecanoate at the fluorite(CaF 2)-water interface have been studied. For the first time, we use in situ vibrational sum-frequency spectroscopy (VSFS) to gain insights into the mechanism and kinetics of monolayer self-assembly at the mineral-water interface. By exploiting the nonlinear optical response of the adsorbate, the temporal correlation of headgroup adsorption and alignment of the surfactant's alkyl chain was monitored. Because of the unique surface-specificity of VSFS, changes in the interfacial water structure were also tracked experimentally. The spectra clearly reveal that the structure of interfacial water molecules is severely disturbed at the start of the adsorption process. With the formation of a well-ordered adsorbate layer, it is partially reestablished; however, the molecular orientation and state of coordination is significantly altered. Even at very low surfactant concentrations, overcharging of the mineral surface (i.e., the adsorption of adsorbates past the point of electrostatic equilibrium) was observed. This points out the importance of effects other than electrostatic interactions and it is proposed that cooperative effects of both water structure and surfactant hemimicelle formation at the interface are key factors. The present study also investigates desorption kinetics of partially and fully established monolayers and a statistical model for data analysis is proposed. Additional experiments were performed in the presence of electrolytes and showed that uni- and divalent anions affect the nonequilibrium kinetics of self-assembled monolayers in strikingly different ways.     

Adsorption and reaction of CO2 and SO2 at a water surface

The orientation and hydrogen bonding of water molecules in the vapor/water interfacial region in the presence of SO2 and CO2 gas are examined using vibrational sum-frequency spectroscopy (VSFS) to gain insight into the adsorption and reactions of these gases in atmospheric aerosols. The results show that an SO2 surface complex forms when the water surface is exposed to an atmosphere of SO2 gas. Reaction of SO2 with interfacial water leads to other spectral changes that are examined by studying the VSF spectra and surface tension isotherms of several salts added to the aqueous phase, specifically NaHSO3, NaHCO3, Na2SO3, Na2CO3, Na2SO4, and NaHSO4. The results are compared with similar studies of CO2 adsorption and reaction at the surface. A weakly bound surface complex is not observed with CO2.     

Adsorption of organosulfur species at aqueous surfaces: molecular bonding and orientation

Four sulfur-containing compounds important to tropospheric chemistry have been examined at the vapor/H2O and vapor/D2O interfaces. These adsorbates, DMS, DMSO, DMSO2, and DMSO3, were studied by surface tension and vibrational sum-frequency spectroscopy (VSFS). Each adsorbate is surface active and each orients with the hydrophobic methyl groups pointed out of the plane of the interface. Their influence on the interfacial water structure is adsorbate dependent. Strong and weak interactions with surface water are observed as well as reorientation of subsurface water molecules, resulting in an increase in interfacial thickness.     

Increased interfacial thickness of the NaF, NaCl and NaBr salt aqueous solutions probed with non-resonant surface second harmonic generation (SHG)

Specific ion effects on the nonlinear optical response from the water molecules at the air/sodium halide solution interfaces are measured using non-resonant surface second harmonic generation (SHG). Procedures have been developed to monitor and remove the impurities in the salt solution samples to ensure measurement of small changes in the SHG signal. Quantitative polarization analysis of the measured SHG data indicated that the average orientation of the interfacial water molecules changed only slightly around 40 degrees with the increase of the bulk concentration of the three sodium halides, namely NaF, NaCl and NaBr, from that of the neat air/water interface. The observed significant SHG signal increase with the bulk salt concentration is attributed to the overall increase of the thickness of the interfacial water molecular layer, following the order of NaBr > NaCl approximately NaF. The absence of the electric-field-induced SHG (EFISHG) effect indicated that the electric double layer at the salt aqueous solution interface is much weaker than that predicted from the molecular dynamics (MD) simulations. These results provided quantitative data to the specific anion effects on the interfacial water molecules of the electrolyte aqueous solution, not only for the larger and more polarizable Br(-) anion, but also for the smaller and less polarizable F(-) and Cl(-) anions.     

Surfactant adsorption at the salt/water interface: comparing the conformation and interfacial water structure for selected surfactants

We report in situ spectroscopic measurements monitoring the adsorption of a series of carboxylate surfactants onto the surface of the semisoluble, ionic solid fluorite (CaF2). We employ the surface-specific technique, vibrational sum-frequency spectroscopy (VSFS), to examine the effect that surfactant adsorption has on the bonding interactions and orientation of interfacial water molecules through the alteration of the electric properties in the interfacial region. In addition, we report on the chain length and headgroup dependence of the formation of hydrophobic self-assembled monolayers on the surface of the solid phase. Differences in chain length and headgroup functionality lead to large changes in the adsorption behavior and structuring of the monolayers formed and the interactions of interfacial water molecules with these monolayers. Fundamental studies such as these are essential for understanding the mechanisms involved in the surfactant adsorption process, information that is important for industrially relevant processes such as mineral ore flotation, waste processing, and petroleum recovery.     

Thermodynamics of phase transitions in langmuir monolayers observed by vibrational sum frequency spectroscopy

Vibrational sum-frequency spectroscopy (VSFS) was used to study gauche defects in octadecylamine (ODA) monolayers at the air/water interface. The VSFS spectra provide unique insights into phase transitions that occur as a result of changes in the structure of the monolayer's hydrophobic region. These changes can be attributed to the increased presence of gauche conformers in the ODA alkyl chains during the monolayer's transition from the solid to liquid phase. Temperature-dependent spectra from monolayers at several different pressures were used to assign the phase transition temperature based on the observed changes in microscopic structure. Through application of a two-dimensional form of the Clapeyron equation, the first in situ measurements of the entropy and enthalpy changes associated with gauche conformers in a monolayer were made.     

Hyperbranched polymers with thermoresponsive property highly sensitive to ions

The salt effects on the water solubility of thermoresponsive hyperbranched polyethylenimine and polyamidoamine possessing large amounts of isobutyramide terminal groups (HPEI-IBAm and HPAMAM-IBAm) were studied systematically. Eight anions with sodium as the counterion and ten cations with chloride as the counterion were used to measure the anion and cation effects on the cloud point temperature (T(cp)) of these dendritic polymers in water. It was found that the T(cp) of these dendritic polymers was much more sensitive to the addition of salts than that of the traditional thermoresponsive linear polymers. At low anion concentration, the electrostatic interaction between anions and the positively charged groups of these polymers was dominant, resulting in the unusual anion effect on the T(cp) of these polymers in water, including (1) T(cp) of these dendritic polymers decreasing nonlinearly with the increase of kosmotropic anion concentration; (2) the chaotropic anions showing abnormal salting-out property at low salt concentration and the stronger chaotropes having much pronounced salting-out ability; (3) anti-Hofmeister ordering at low salt concentration. At moderate to high salt concentration, the specific ranking of these anions in reducing the T(cp) of HPEI-IBAm and HPAMAM-IBAm polymers was PO(4)(3-) > CO(3)(2-) > SO(4)(2-) > S(2)O(3)(2-) > F(-) > Cl(-) > Br(-) > I(-), in accordance with the well-known Hofmeister series. At moderate to high salt concentration, the specific ranking order of inorganic cations in reducing the T(cp) of HPEI-IBAm polymer was Sr(2+) ≈ Ba(2+) > Na(+) ≈ K(+) ≈ Rb(+) > Cs(+) > NH(4)(+) ≈ Ca(2+) > Li(+) ≈ Mg(2+). This sequence was only partially similar to the typical Hofmeister cation series, whereas at low salt concentration the cation effect on T(cp) of the dendritic polymer was insignificant and no obvious specific ranking order could be found.     

Spectroscopic studies of solvated hydrogen and hydroxide ions at aqueous surfaces

Measuring the molecular properties of the surface of acidic and basic aqueous solutions is essential to understanding a wide range of important biological, chemical, and environmental processes on our planet. In the present studies, vibrational sum-frequency spectroscopy (VSFS) is employed in combination with isotopic dilution experiments at the vapor/water interface to elucidate the interfacial water structure as the pH is varied with HCl and NaOH. In acidic solutions, solvated proton species are seen throughout the interfacial region, and they alter the hydrogen bonding between water molecules in ways that reflect their depth in the interfacial region. At the higher frequencies of the OH stretch region, there is spectral evidence for solvated proton species residing in the topmost layers of the interfacial region. As reported in previous VSF studies, more strongly bound solvated proton species are observed at lower OH stretching frequencies. The solvated proton species that have stronger hydrogen bonding are similar in structure to those found in bulk acid solutions and likely reside somewhat deeper in the interfacial region. There is also evidence of OH stretching from solvated protons and relatively strong hydrogen bonding in the solvation sphere that is similar to other solvated ions. In contrast, water molecules solvating OH(-) ions show relatively weak hydrogen bonding and significantly less interfacial order. VSF spectra are acquired under multiple polarizations to provide crucial information for the interpretation of the spectra and for the determination of interfacial structure.     

Hofmeister effects in surface tension of aqueous electrolyte solution

The surface tension of electrolyte solutions shows marked specific ion effects. We here show an important role for both ionic solvation energies and ionic dispersion potentials in determining this ion specific surface tension of salt solutions. The ion self-free energy changes when an ion moves from bulk solution into the interfacial region, with its decreasing water density profile. We will show that the solvation energies of different ions correlate very well with the surface tension of salt solutions. Inclusion of this distance-dependent self-free energy contribution brings qualitative agreement with experiments and the right Hofmeister series. This is so not only for surface tension changes but also for measured surface potentials. The inclusion of ionic dispersion interaction potentials further improves the agreement with experiments. We discuss how further progress in the theory of the surface tension of salts can be achieved.     

Preparation and characterization of salt hydrates encapsulated in polyamide membranes

Thermodynamic water activity control is a common technique in organic-phase biocatalysis. This can be accomplished by using the transitions of salt hydrates between their various hydrated forms as a water buffer. While this technique is well established, the use of free salt crystals in the reaction mixture poses numerous problems such as difficult recovery and poisoning of the biocatalyst. This article outlines a novel technique for the encapsulation of such materials which avoids these difficulties. The characterization of the capsules and their use as water activity buffers has also been described. Hydrates of Na₂HPO₄ were encapsulated in a polyamide membrane by interfacial polycondensation (IPC) of sebacoyl dichloride and diethylene triamine soaked onto the surface of the salt crystals. This technique, non-aqueous interfacial polycondensation (NAIPC) circumvents the need for the use of an aqueous phase to supply the polar reactant, the amine, thereby facilitating the encapsulation of water soluble materials. The coatings thus produced have an asymmetric membrane-like structure. A thin, non-porous, layer around the salt crystal supports a superstructure of porous polymer. This composite structure facilitates diffusion of material through the capsule wall and the use of hydrophilic polyamides for encapsulation promotes the transport of water. The capsules produced were between 0.5 and 2.5 mm in size and were of adequate mechanical strength to withstand osmotic pressure differences upto 26 bar and resist attritive forces experienced during their use.     

Surface structure of a "non-amphiphilic" protic ionic liquid

The nanostructure of the ethanolammonium nitrate (EtAN)-air surface has been investigated using X-ray reflectometry (XRR), vibrational sum frequency spectroscopy (VSFS) and neutral impact collision ion scattering spectroscopy (NICISS). The XRR data decays more rapidly than expected for a perfectly sharp interface, indicating a diffuse electron (scattering length) density profile. Modelling of the XRR data using three different fitting routines produced consistent interfacial profiles that suggest the formation of interfacial EtAN clusters. Consistent with this, VSFS reveals that the EtAN surface is predominantly covered by -CH(2)- moieties, with the -NH(3)(+) and -OH groups of the cation buried slightly deeper in the interface. The elemental profiles determined using NICISS also show enrichment of carbon relative to nitrogen and oxygen in the outermost surface layer, which is consistent with the surface cation orientation deduced from VSFS, and with the presence of EtAN aggregates at the liquid surface.     

Air-liquid interfaces of aqueous solutions containing ammonium and sulfate: spectroscopic and molecular dynamics studies

Investigations of the air-liquid interface of aqueous salt solutions containing ammonium (NH(4)(+)) and sulfate (SO(4)(2-)) ions were carried out using molecular dynamics simulations and vibrational sum frequency generation spectroscopy. The molecular dynamics simulations show that the predominant effect of SO(4)(2-) ions, which are strongly repelled from the surface, is to increase the thickness of the interfacial region. The vibrational spectra reported are in the O-H stretching region of liquid water. Isotropic Raman and ATR-FTIR (attenuated total reflection Fourier transform infrared) spectroscopies were used to study the effect of ammonium and sulfate ions on the bulk structure of water, whereas surface sum frequency generation spectroscopy was used to study the effect of these ions on the interfacial structure of water. Analysis of the interfacial and bulk vibrational spectra reveal that aqueous solutions containing SO(4)(2-) perturb the interfacial water structure differently than the bulk and, consistent with the molecular dynamics simulations, reveal an increase in the thickness of the interfacial region.     

Crown ethers at the aqueous solution-air interface. Part 2. Electrolyte effects, ethylene oxide hydration and temperature behaviour

Vibrational Sum Frequency Spectroscopy (VSFS) was employed to study adsorbing films of 4-Nitro Benzo-15-Crown-5 (NB15C5) and Benzo-15-Crown-5 (B15C5) at the aqueous solution-air interface. The surface of the solution is strongly influenced by the presence of crown ether species. Changes in the orientation of NB15C5 were monitored as a function of solution concentration, by targeting the ratio of peak intensities of the CN and NO(2) vibrational modes. The water of hydration has also been probed as a function of crown concentration, salt concentration, and temperature. The latter study strongly suggests that the surface can be treated as a charged interface, and that the associated ordered water decreases with increasing ionic strength of the bulk solution.     

Molecular features of the air/carbonate solution interface

The nature of the air/carbonate solution interface is considered with respect to water structure by sum-frequency vibrational spectroscopy (SFVS) and molecular dynamics simulations (MDS). Results from this study provide further understating regarding previous observations that the surface tensions of structure making sodium carbonate solutions have been shown to be significantly greater than the surface tensions of structure breaking bicarbonate solutions at equivalent concentrations. This difference in surface tension and its variation with salt concentration is related to the organization of water and ions at the air/solution interface. Spectral results from SFVS show at equivalent concentrations that, for the carbonate solution, the strong water structure signal of 3200 cm(-1) at the air/carbonate solution interface is increased by a factor of 4 when compared to the same signal for the air/bicarbonate solution interface, which spectrum is weaker than the spectrum for the air/water interface in the absence of salt. These results from SFVS are explained by the results from MDS which show that in the case of carbonate solutions the structure making carbonate ions are excluded from the interfacial water region which region is extended in depth. On the other hand, in the case of bicarbonate solutions, the bicarbonate ions are accommodated in the interfacial water region and there is no evidence of an increase in the extent of water structure. These SFVS experimental and MD simulation results provide further information to understand interfacial phenomena of soluble salts at the molecular level.     

Nitrous oxide vibrational energy relaxation is a probe of interfacial water in lipid bilayers

Ultrafast infrared spectroscopy of N 2O is shown to be a sensitive probe of hydrophobic and aqueous sites in lipid bilayers. Distinct rates of VER of the nu 3 antisymmetric stretching mode of N 2O can be distinguished for N 2O solvated in the acyl tail, interfacial water, and bulk water regions of hydrated dioleoylphosphatidylcholine (DOPC) bilayers. The lifetime of the interfacial N 2O population is hydration-dependent. This effect is attributed to changes in the density of intermolecular states resonant with the nu 3 band ( approximately 2230 cm (-1)) resulting from oriented interfacial water molecules near the lipid phosphate. Thus, the N 2O VER rate becomes a novel and experimentally convenient tool for reporting on the structure and dynamics of interfacial water in lipids and, potentially, in other biological systems.     

The Significance of Interfacial Water Structure in Soluble Salt Flotation Systems

Flotation of soluble salts with dodecyl amine hydrochloride (DAH) and sodium dodecyl sulfate (SDS) collectors has demonstrated that the interfacial water structure and hydration states of soluble salt surfaces together with the precipitation tendency of the corresponding collector salts are of considerable importance in explaining their flotation behavior. In particular, the high concentration of ions in these soluble salt brines and their hydration appear to modify the bulk and interfacial structure of water as revealed by contact angle measurements and this effect is shown to be an important feature in the flotation chemistry of soluble salt minerals including alkali halide and alkali oxyanion salts. Depending on characteristic chemical features (salt type), the salt can serve either as a structure maker, in which intermolecular hydrogen bonding between water molecules is facilitated, or as a structure breaker, in which intermolecular hydrogen bonding between water molecules is disrupted. For structure making salts the brine completely wets the salt surface and no contact angle can be measured. For structure breaking salts the brine does not completely wet the salt surface and a finite contact angle is measured. In this regard it has been found that soluble salt flotation either with the cationic DAH or anionic SDS collector is possible only if the salt is a structure breaker. Copyright 2001 Academic Press.     

Surface vibrational structure at alkane liquid/vapor interfaces

Broadband vibrational sum frequency spectroscopy (VSFS) has been used to examine the surface structure of alkane liquid/vapor interfaces. The alkanes range in length from n-nonane (C(9)H(20)) to n-heptadecane (C(17)H(36)), and all liquids except heptadecane are studied at temperatures well above their bulk (and surface) freezing temperatures. Intensities of vibrational bands in the CH stretching region acquired under different polarization conditions show systematic, chain length dependent changes. Data provide clear evidence of methyl group segregation at the liquid/vapor interface, but two different models of alkane chain structure can predict chain length dependent changes in band intensities. Each model leads to a different interpretation of the extent to which different chain segments contribute to the anisotropic interfacial region. One model postulates that changes in vibrational band intensities arise solely from a reduced surface coverage of methyl groups as alkane chain length increases. The additional methylene groups at the surface must be randomly distributed and make no net contribution to the observed VSF spectra. The second model considers a simple statistical distribution of methyl and methylene groups populating a three dimensional, interfacial lattice. This statistical picture implies that the VSF signal arises from a region extending several functional groups into the bulk liquid, and that the growing fraction of methylene groups in longer chain alkanes bears responsibility for the observed spectral changes. The data and resulting interpretations provide clear benchmarks for emerging theories of molecular structure and organization at liquid surfaces, especially for liquids lacking strong polar ordering.     

Crown ethers at the aqueous solution-air interface: 1. Assignments and surface spectroscopy

The surface of aqueous solutions of 4-Nitro Benzo-15-Crown-5 (NB15C5) and Benzo-15-Crown-5 (B15C5) has been studied using the surface sensitive technique vibrational sum frequency spectroscopy (VSFS). The NO, CN, COC and CH vibrational modes of these compounds at the air-water interface as well as OH vibrational modes of the surface water hydrating this compound have been targeted in order to obtain molecular information about arrangement and conformation of the adsorbed crown ether molecules at the air-water interface. The CH(2) vibrational modes of crown ethers have been identified and found to be split due to interaction with ether oxygen. The spectra provide evidence for the existence of a protonated crown complex moiety at the surface leading to the appearance of strongly ordered water species. The interfacial water species are influenced by the resulting charged interface and by the strong Zundel polarizability due to tunneling of the proton species between equivalent sites within the crown ring.     

Self-assembly and emulsification of poly{[styrene-alt-maleic acid]-co-[styrene-alt-(N-3,4-dihydroxyphenylethyl-maleamic acid)]}

Self-assembled polymeric micelles can be used as efficient particulate emulsifiers. To explore the relationship between the structure and the oil-water interfacial behavior of the micelle emulsifiers, a new type of amphiphilic random copolymer, poly{(styrene-alt-maleic acid)-co-[styrene-alt-(N-3,4-dihydroxyphenylethyl-maleamic acid)]} (SMA-Dopa), was synthesized, self-assembled into micelles, and used as emulsifiers. SMA-Dopa was synthesized via an aminolysis reaction between dopamine and commercial alternating copolymer poly(styrene-alt-maleic anhydride) (SMA). Dopamine moiety facilitated the self-assembly of the SMA-Dopa in selective-solvent into stable micelles, and increased the adsorption of the SMA-Dopa at the oil-water interface. Additionally, the structural transition of the self-assembled SMA-Dopa52 micelles in response to pH and salinity changes were confirmed by means of TEM, AFM, DLS, aqueous electrophoresis techniques, potentiometric titration, and pyrene fluorescence probe methods. Micelles shrunk with increasing salinity, and flocculation of the shrunken primary micelles occurred at salt concentration exceeding 0.1 M. The micelles swelled with increasing pH, and the disassociation of the SMA-Dopa52 micelles occurred at pH above approximately 6.5. The structure of the micelles plays a crucial role in the oil-water interfacial performance. Micelles with various structures were used as emulsifiers to adsorb at the styrene-water and toluene-water interfaces. The emulsifying characteristics demonstrated that self-assembled SMA-Dopa52 micelles with moderately swollen structure (at 2 < pH < 6) combine the advantages of the solid particulate emulsifiers and polymeric surfactants, possessing excellent emulsifying efficiency and good emulsion stability. Moreover, the emulsifying performance of the SMA-Dopa52 micelles could be enhanced by the addition of salt.     

Interfacial structures of methanol:water mixtures at a hydrophobic interface probed by sum-frequency vibrational spectroscopy

Sum-frequency vibrational spectroscopy was used to study interfacial structure of methanol:water mixtures at an octyltrichlorosilane-covered hydrophobic surface. Methanol was found to adsorb preferentially than water at the interface with its methyl group tilted from the surface normal by approximately 35 degrees for all methanol concentrations. Redshift of the methanol symmetric stretch mode, gradual disappearance of the water dangling-OH mode, and blueshifts of the dangling and liquidlike bonded-OH modes were also observed as the methanol concentration increased. They could be understood from the change of the interfacial hydrogen-bonding network associated with the change of surface composition.