Linear programming optimization in CHP networks

This paper shows how to simulate a CHP network (CHP = Combined Heat and Power) using the method of linear programming. This method makes it possible to optimize the mathematical model and subsequently find the very best combination of electricity production, electricity purchase and heat production in a district heating system. The optimal solution in the model is characterized by the lowest possible operating cost for year. The paper shows the design of the mathermatical model and furthermore a case study is presented using the district heating net in Malmö, Sweden, as an example.     

Large eddy simulation of bluff-body stabilized swirling non-premixed flames

Large eddy simulations (LES) using a subgrid mixing and combustion model are carried out to study two bluff-body stabilized swirling non-premixed flames (SM1 and SMA2). The similarities and differences between the two flames are highlighted and discussed. Flow features, such as, the recirculation zone (RZ) size and the flame structure are captured accurately in both cases. The SM1 flame shows a toroidal RZ just behind the bluff body and a vortex breakdown bubble (VBB) downstream. In addition, a highly rotational non-recirculating region in-between the RZ and VBB is observed as well. On the other hand, the SMA2 shows a single elongated recirculation zone downstream the bluff body. Flame necking is observed downstream the bluff body for the SM1 flame but not for the SMA2 flame. The time-averaged velocity and temperature comparison also shows reasonable agreement. The study shows that the sensitivity of the flame structure to inflow conditions can be captured in the present LES without requiring any model changes.     

Equilibrium and dynamical behavior in the Vicsek model for self-propelled particles under shear

The effects of an externally imposed linear shear profile in the Vicsek model of self-propelled particles is investigated via computer simulations. We find that the applied field changes in a relevant way both the equilibrium and dynamical properties of the original model. Indeed, short time dynamics analysis shows that the order-disordered phase transition disappears under shear, because the flow acts as a symmetry breaking field. Moreover, the coarsening of particle domains is arrested at a characteristic length-scale inversely proportional to shear rate. A generalization of the original Vicsek model where the velocity of particles depends on the local value of the density is also introduced and shows to affect the domain formation.     

量子参数激励单摆的局域效应研究

分析了二能级原子在振幅调制主波场中动量扩散模型。这是一个量子参数激励单摆系统。这个量子系统在经典极限下表现混沌行为。在相同参数条件下,这个系统具有动力学特征。     

Positive ion speed at the plasma–sheath boundary of a negative ion-emitting electrode

One-dimensional fluid model for a planar sheath in front of a negative ion-emitting electrode surface immersed in a collision-less, non-magnetized, electronegative plasma is presented. It was found that the positive ion speed at the plasma–sheath boundary (PSB) increases linearly with negative ion emission from the electrode but attains a saturation value as soon as a virtual cathode is formed near the electrode surface. The effect of negative ion emission on the pre-sheath region shows that the potential drop increases across the pre-sheath in accordance with the rise in positive ion speed at the PSB. The sheath width obtained using the present model shows a similar trend as the Child-Langmuir law, but its magnitude is found to be consistently higher compared with a non-emitting electrode. A plausible explanation has been given to explain these effects.     

An improved model to calculate radiative heat transfer in hot combustion gases

Radiative heat transfer plays an important role in the chemical reactions in the combustor. The widely used WSGG model proposed by Smith is established for normal pressure, which shows inevitable computational errors when dealing with radiative heat transfer problems at reduced or elevated pressures. In this paper, an improved global model is established to calculate the radiant energy exchanges between combustion gases and combustor chamber walls. Compared with the Smith model, the new model shows better performance in a wide range of pressure regions. The model accuracy is examined by computing the emissivity, radiative heat flux as well as the radiative source of H₂O–CO₂ gas mixtures at different pressure values. Finally, the radiative heat transfer inside a 3D TBCC(turbine-based combined cycle) engine exhaust system where strong gradients of pressure and temperature exist, is also addressed. The computational results show that the developed model provides approximate results at much less computational costs than the high-precision MSMGFSK-c8 model, which makes it competitive in complicated combustion systems.     

On the finiteness of a new topological model in D=3

A new topological model is proposed in three dimensions as an extension of the BF-model. It is a three-dimensional counterpart of the two-dimensional model introduced by Chamseddine and Wyler ten years ago. The BFK-model, as we shall call it, shows to be quantum scale invariant at all orders in perturbation theory. The proof of its full finiteness is given in the framework of algebraic renormalization.     

Modeling cochlear dynamics: interrelation between cochlea mechanics and psychoacoustics

A model of the cochlea was used to bridge the gap between model approaches commonly used to investigate phenomena related to otoacoustic emissions and more filter-based model approaches often used in psychoacoustics. In the present study, a nonlinear and active one-dimensional transmission line model was developed that accounts for several aspects of physiological data with a single fixed parameter set. The model shows plausible excitation patterns and an input-output function similar to the linear-compressive-linear function as hypothesized in psychoacoustics. The model shows realistic results in a two-tone suppression paradigm and a plausible growth function of the 2f(1)-f(2) component of distortion product otoacoustic emissions. Finestructure was found in simulated stimulus-frequency otoacoustic emissions (SFOAE) with realistic levels and rapid phase rotation. A plausible "threshold in quiet" including finestructure and spontaneous otoacoustic emissions (SOAE) could be simulated. It is further shown that psychoacoustical data of modulation detection near threshold can be explained by the mechanical dynamics of the modeled healthy cochlea. It is discussed that such a model can be used to investigate the representation of acoustic signals in healthy and impaired cochleae at this early stage of the auditory pathway for both, physiological as well as psychoacoustical paradigms.     

泡沫混排解堵数学模型及数值模拟

建立泡沫井筒流动模型与泡沫地层渗流模型,得到完整的泡沫混排解堵数学模型;利用数值方法对模型进行耦合求解,得到泡沫压力,质量,密度在井筒中的分布及井口井底压力的变化规律.在固定井口回压情况下,得到井底压差的变化规律.结果表明:随着井深的增加,泡沫压力增加,质量减小,密度增加;固定井口回压,井底压差则逐渐变小.     

地脉动作用下主机装置靶室结构稳定性分析与评估

在大型固体激光器结构稳定性设计中,数值模拟结果是结构稳定性设计的主要依据,故数值模拟的可信度至关重要。为了评估装置稳定性计算结果的可信度,基于现代模型验证与确认技术中关于不确定性源的量化及传播分析方法、模型形式误差与预测推断的叠加方法研究,对靶球结构的最大位移响应进行了预测推断。稳定性分析中为了快速进行不确定性参数的传播和灵敏度分析,使用二次响应面模型作为代理模型,灵敏度分析结果表明模态阻尼比对靶球结构的稳定性影响更大。对关心量的稳定性预测结果表明,靶球结构最大位移响应的上界与稳定性设计指标相比,安全裕度仍大于7,说明主机装置的稳定性设计具有足够的可信度。     

Mathematical modeling of laser ablation in liquids with application to laser ultrasonics

The use of laser ablation as a means of generating ultrasonic waves in liquid metals is studied in this paper. A mathematical model for predicting the onset of ablation is developed, as is a model of the ablation process based on steady state, one-dimensional gas dynamics in which the vapor phase is treated as an ideal gas. The results of this model are then used in a quasi-two-dimensional model of laser ablation that accounts for the spatial distribution of intensity in the laser beam. Model predictions are compared with experiments conducted on liquid mercury and excellent agreement is obtained. Based on these results, a simplified model is developed that shows excellent agreement with both the theory and the experiments.     

Modeling of the RF system for the normal conducting linac

To study the new RF control methods, a mathematic model of the RF system for the normal conducting linac is built and implemented with the software of Matlab. The model contains some typical units of the RF system, such as the klystron, the SLED and the traveling wave accelerating tube. Finally, the model is used to study the working point of the SLED and the adaptive feed forward algorithm for the RF control system. Simulation shows that the model works well as expected.     

常温直线加速器RF系统的建模

为了研究针对RF系统的新的控制方法,用Matlab软件为常温直线加速器的RF系统建立了一个数学模型。模型包括了速调管、SLED和行波加速管等一些典型的微波器件。RF系统模型被用于研究系统在不同输入信号下的输出情况,并用于确定SLED的相位翻转时间和RF系统的工作点。一种新的控制算法,自适应前馈控制算法,也在RF系统模型上得到了验证,并取得了良好的结果。这些都证明所建立的RF系统模型是有效的。     

Properties of six-quark clusters in the topological chiral soliton model

The energy and bag radius of a six-quark configuration are obtained from a topological chiral soliton model. The calculation shows that three and six quark systems in this model behave much as those in the MIT bag model.     

特异材料吸收体的透射线模型与场分析:理想的电磁波浓缩器(英文)

Arising from the proposed Transmission Line(TL) model for ERR and wire structure, a TL model for a metamaterial absorber is proposed. The S-parameters obtained by this TL model demonstrate the same shapes as the simulation. An investigation of the TL model and average absorption power densities shows that the metamaterial absorber does not simply convert the electromagnetic wave into thermal energy, but concentrate the electromagnetic wave into a small space where it is finally absorbed. This suggests that ...     

Mathematical modeling of bacterial metabolism

A variant of mathematical model construction for the anaerobic metabolism of a purple nonsulfur bacterium based on a flux balance analysis is presented in this paper. The model includes all the central metabolic pathways of the bacterial cell, as well as pathways for biosynthesis of amino acids and bacteriochlorophyll. It is shown that the results of modeling of bacterial photoheterotrophic growth on acetate agree with experimental values for the known metabolite pathways, which shows that the constructed model adequately describes actual cellular processes.     

丝状发光的GaAs注入式半导体激光器中结电流密度与载流子浓度的分布

本文从一简单模型出发,计算了丝状发光器件的电流密度、电压、载流子浓度和增益分布。以数值结果揭示外延层的体电阻率及厚度、活性区载流子的扩散长度、模增益和丝区宽度等参量对上述各种分布的影响。特别是电阻率,对丝区宽度将有显著影响。模型把外电路的可测量与器件的发光特性联系在一起,指出平均工作电流密度与发光丝区的电流密度之明显差别。结果也表明,器件材料的不均匀性对丝的定位将有重要作用。 关键词：     

基于支持向量机的近红外光谱鉴别茶叶的真伪

快速准确地鉴别名优茶的真伪是当前茶叶行业亟待解决的一项重大课题。针对这一现状,提出了一种快速准确鉴别名优茶真伪的新思路。试验中,以碧螺春茶为研究对象,利用近红外光谱分析技术结合支持向量机(SVM)模式识别原理建立碧螺春茶真伪鉴别模型。试验结果显示,通过标准归一化(SNV)预处理,选取6500~5500 cm-1波长范围内的光谱经过主成分分析后,提取11个主成分,选用径向基函数(RBF)作为核函数建立的模型最佳。对训练集中的138个茶叶样本,模型的回判鉴别率达到93.48%;对90个独立样本进行预测时,模型的预测鉴别率达到84.44%。研究结果表明基于支持向量机的近红外光谱鉴别名优茶真伪的方法是可行的。     

A pure geometric approach to stellar structure

The present work represents a step in dealing with stellar structure using a pure geometric approach. Geometric field theory is used to construct a model for a spherically symmetric configuration. In this case, two solutions have been obtained for the field equations. The first represents an interior solution which may be considered as a pure geometric one in the sense that the tensor describing the material distributions is not a phenomenological object, but a part of the geometric structure used. A general equation of state for a perfect fluid, is obtained from, and not imposed on, the model. The second solution gives rise to Schwarzschild exterior field in its isotropic form. The two solutions are matched, at a certain boundary, to evaluate the constants of integration. The interior solution obtained shows that there are different zones characterizing the configuration: a central radiation dominant zone, a probable convection zone as a physical interpretation of the singularity of the model, and a corona like zone. The model may represent a type of main sequence stars. The present work shows that Einstein’s geometerization scheme can be extended to gain more physical information within material distribution, with some advantages.     

Extended Quark Potential Model from Random Phase Approximation

The quark potential model is extended to include the sea quark excitation using the random phase approx-imation. The effective quark interaction preserves the important QCD properties - chiral symmetry and confinementsimultaneously. A primary qualitative analysis shows that the π meson as a well-known typical Goldstone boson andthe other mesons made up of valence qq quark pair such as the ρ meson can also be described in this extended quarkpotential model.