混凝土类材料动态压缩强度在多维应力状态下的应变率效应

对混凝土类材料动态压缩应变率效应研究的发展及问题进行了概述,对比不同应力状态下混凝土类材料动态压缩应变率效应的表现特征,揭示了不同加载路径下实测动态强度提高系数的显著差异。研究表明,在高应变率下,基于初始一维应力加载路径的试件将因横向惯性效应导致的侧向围压而演化至多维应力状态,传统霍普金森杆技术无法获得高应变率下基于真实一维应力路径的动态强度提高系数,在强度模型中直接应用实测数据将过高估计材料的动态强度。鉴于应变率效应的加载路径依赖性,将仅包含应变率的强度提高系数模型扩展至同时计及应变率和应力状态的多维应力状态模型,并结合Drucker-Prager准则在强度模型中给予了实现。针对具有自由和约束边界试件开展的数值霍普金森杆实验表明,多维应力状态下的应变率效应模型可以考虑应变率效应随应力状态改变的特点,从而准确预测该类材料的动态压缩强度。研究结果可为正确应用霍普金森杆技术确定脆性材料的动态压缩强度提供参考。     

Loading and unloading split hopkinson pressure bar pulse-shaping techniques for dynamic hysteretic loops

Pulse-shaping techniques are developed for both the loading and unloading paths of a split Hopkinson pressure bar (SHPB) experiment to obtain valid dynamic stress-strain loops for engineering materials. Front and rear pulse-shapers, in association with a momentum trap, are used to precisely control the profiles of the loading and unloading portions of the incident pulse. The modifications, ensure that the specimen deforms at the same constant strain rate under dynamic stress equilibrium during both loading and unloading stages of an experiment so that dynamic stress-strain loops can be accurately determined. Dynamic stress-strain loops with a constant strain rate for a nickel-titanium shape memory alloy and polymethyl methacrylate are determined using the modified SHPB. The modified momentum trap prevents repeated loading on a specimen without affecting the amplitude of the desired loading pulse and without damaging the bar at high stress levels.     

用于高强度材料的SHPB实验添加垫块法

提出了用于高强度材料的改进的SHPB实验方法添加垫块法,运用数值模拟方法,利用有限元程序LS-DYNA3D分析了添加垫块实验方法的合理性和可行性。根据一维应力波理论,给出了数据处理的修正方法。作为应用实例,采用改进的实验方法对高强度的Al2O3陶瓷材料的动态力学性能进行了研究,得到了比常规方法较高的应变率及应力应变范围的动态应力应变曲线,表明Al2O3陶瓷为应变率相关的非线性弹脆性材料。结果表明,添加垫块实验方法可有效地防止实验中压杆端面的变形,提高试件的应力应变及应变率水平。添加垫块实验方法为在SHPB装置上实现高强度材料的动态实验提供了一种方便实用的途径。     

反分析法在泡沫金属材料动态性能实验中的应用

在实验测试泡沫金属材料的动态性能时，由于其所具有的特殊性能使得传统的SHPB技术的采用遇到较大的困难。为了实验确定泡沫金属材料的初始动力坍塌强度和平台应力，研究其应变率效应，在现有SHPB实验装置的基础上,利用反分析法中的反卷积技术，通过计算机模拟给出了该实验装置的传递函数，完善了SHPB实验的数据处理系统，为实验研究泡沫材料的动态特性提供了一种有效的方法。     

EXPERIMENTAL AND NUMERICAL STUDIES ON DYNAMIC COMPRESSIVE BEHAVIOR OF REACTIVE POWDER CONCRETES

Split Hopkinson pressure bar （SHPB） technique is used to determine the dynamic strength of reactive powder concretes （RPCs） with different steel-fiber contents. Two types of pulse shapers with different thicknesses are considered to reduce the high-frequency-oscillation effect and achieve a nearly constant strain rate over a certain deformation range. It is known that the compressive strength of concrete-like materials is hydrostatic-stress-dependent, and the apparent dynamic strength enhancement comes from both the effects of the hydrostatic stress and strain rate. In order to differentiate them, numerical method is used to calculate the contribution of the hydrostatic stress, and then the genuine strain-rate effect on dynamic compressive strength of RPCs is determined. In addition, the effect of steel-fibers on dynamic strength and failure mode of RPCs is discussed.     

高应变率下多孔未极化PZT95/5铁电陶瓷的非线性力学行为

采用添加造孔剂的方法制备了4种不同孔隙率的未极化PZT95/5铁电陶瓷。采用基于超高速相机与数字图像相关性方法的试样全场应变测量技术以及分离式霍普金森压杆（SHPB）技术,对多孔未极化PZT95/5铁电陶瓷进行高应变率单轴压缩实验研究。全场应变测量结果显示:轴向应变仅在试样中部分布较均匀,将该区域的平均应变作为应力-应变关系中的试样应变测量值较为合理,而由SHPB原理计算的试样应变值明显偏大,需要摒弃或修正传统的SHPB数据处理方法。通过波形整形技术实现了恒应变率加载,弱化了径向惯性效应的影响,揭示出多孔未极化PZT95/5铁电陶瓷的压缩强度具有显著的应变率效应。通过分析试样轴向应变和径向应变随着加载应力的变化,阐明多孔未极化PZT95/5铁电陶瓷的非线性变形行为的物理机制是畴变和相变共同作用,并发现畴变临界应力和相变临界应力都随着应变率升高而增大。保持加载应变率不变,讨论了孔隙率对多孔未极化PZT95/5铁电陶瓷动态力学行为的影响,发现随着孔隙率的升高,动态压缩强度呈非线性衰减,而畴变临界应力和相变临界应力则基本呈线性衰减。     

Specimen Size and Strain Rate Effects on the Compressive Behavior of Concrete

Three high-performance concrete (HPC) materials with different specimen geometries were characterized using Kolsky compression bar techniques to study the strain rate and specimen size effects on their uniaxial compressive strength. A large-diameter Kolsky bar and recently established annular pulse shaping technique were used to achieve dynamic stress equilibrium and constant strain-rate deformation in the experiments. A complimentary effort was conducted using a 19-mm-diameter Kolsky compression bar to understand the strain rate and specimen size effects on failure strength and dynamic increase factor (DIF) for concrete. It was found that, for all three concrete materials investigated, the failure strength is highly dependent on the specimen geometry, however such a relationship is not apparent for the DIF. The DIF observed in this study shows significantly lower values compared to historical data, which may indicate the importance of well-controlled dynamic testing conditions on the accuracy and validity of experimental results for concrete materials.     

Design of Inserts for Split-Hopkinson Pressure Bar Testing of Low Strain-to-Failure Materials

In the present study a new insert design is presented and validated to enable reliable dynamic mechanical characterization of low strain-to-failure materials using the Split-Hopkinson Pressure Bar (SHPB) apparatus. Finite element-based simulations are conducted to better understand the effects of stress concentrations on the dynamic behavior of LM-1, a Zr-based bulk metallic glass (BMG), using the conventional SHPB setup with cylindrical inserts, and two modified setups—one utilizing conical inserts and the other utilizing a “dogbone” shaped specimen. Based on the results of these computational experiments the ends of the dogbone specimen are replaced with high-strength maraging steel inserts. This new insert-specimen configuration is expected to prevent specimen failure outside the specimen gage section. Simulations are then performed to validate the new insert design. Moreover, high strain-rate uniaxial compression tests are conducted on LM-1 using the modified SHPB with the new inserts. An ultra-high-speed camera is employed to investigate the changes in failure behavior of the specimens. Additional experiments are conducted with strain gages directly attached to the gage section of the specimens to determine accurately their dynamic stress–strain behavior.     

Modelling of compressive behaviour of concrete-like materials at high strain rate

Uniaxial compression tests are the most common tests for characterizing the strength of concrete-like materials. The dynamic compression strength of concrete-like material is typically obtained by Split Hopkinson Pressure Bar (SHPB) tests. The increase in material strength under dynamic loading is usually attributed to the strain rate effect and modelled with a dynamic increase factor (DIF). However, it was observed by some researchers that the radial inertial confinement caused apparent increase of dynamic strength of concrete-like specimen in SHPB tests. They attributed the material strength increase to this inertial effect, instead of the strain rate effect. In the present study, numerical analyses are performed to investigate the compressive behaviour of concrete-like material at high strain rates. A homogeneous macroscale model and a heterogeneous mesoscale model are developed in the study. In the macroscale model, the material is assumed to be homogeneous and isotropic. In the mesoscale model, the test sample is modelled as a three-phase composite consisting of aggregate, mortar matrix and interfacial transaction zone (ITZ) between the aggregate and the mortar matrix. The aggregate is assumed to be circular and the ITZ is modelled as a thin boundary around the aggregate. In the both models, the materials are assumed to be insensitive to the strain rate first. Therefore, the obtained strength enhancement is only due to the inertial confinement. Strain rate sensitive material properties are then used in the two models in the calculations. Numerical simulations of the concrete samples under compression at different strain rates are carried out. The relative contribution of the inertial effect and the strain rate effect on the compressive strength DIF is examined based on the numerical results. The failure process of concrete specimen is also studied.     

研究材料动态本构特性中的重要作用

在材料动态本构关系的研究中，不论是由波传播信息反求材料本构关系，即所谓解第二类反问题，还是利用应力波效应和应变率效应解耦的方法（如SHPB技术），应力波传播实际上都起着关键作用。在一般性讨论的基础上，就SHPB试验技术分析了应力波传播如何影响材料动态本构特性的有效确定。对于应力/应变沿试件长度均匀分布假定以及一维应力波假定，着重进行了分析。     

Dynamic pre-strain and inertia effects on the fracture of metals

A combined experimental and theoretical study is described which examines the influence of strain-rate and dynamic pre-strain on the ductile fracture of thin cylinders. The thin-cylinder configuration is particularly important in this case because it allows inertia terms to be directly incorporated into the theory of plastic instability. A series of quasi-static and dynamic tests is conducted on three materials with differing degrees of strain-rate sensitivity and strain-hardening. The experimental observation that fracture is inhibited at high strain-rates is in accord with the theory when inertia can no longer be considered insignificant. It is also shown that dynamic pre-strain has little or no effect on the flow stress or the strain at fracture in materials which-are essentially strain-rate insensitive, but does reduce the fracture strain in the strain-rate sensitive materials.     

聚合物材料SHPB实验关键问题

分离式霍普金森压杆(SHPB)广泛用于测量聚合物材料在高应变率下的动态力学行为.但是由于聚合物材料本身的低强度、低刚度、低阻抗、低波速等特点,使得SHPB动态试验相比其他材料更加复杂.论文较为详细地综述了聚合物材料SHPB实验技术中的应力应变计算、脉冲整形技术、动态应力平衡、摩擦与惯性效应、试件与波导杆的选择、碰撞速度与应变率关系、最大常应变率的确定等关键问题及其进展.理解这些关键问题并且采用目前较好的方法,对于获得聚合物材料有效和准确的高应变率力学特性具有重要意义.     

Thickness Effect of Pulse Shaper on Dynamic Stress Equilibrium and Dynamic Deformation Behavior in the Polycarbonate Using SHPB Technique

0Introduction Thehighstrainratestress strainresponsesofpolymersandpolymericcompositematerialshave receivedincreasedscientificandindustrialattentioninrecentyears.Polymericmaterialsaresubjected todynamicloadingandhighstrainratedeformationinavarietyofimporta…     

大尺寸Hopkinson压杆及其应用

本文介绍了国内最大尺寸的SHPB装置;讨论了在大尺寸SHPB装置上测量混凝土类材料动态力学性能将会出现的几个问题;采取了在入射杆的打击端加设波形整形器,在试件与杆件之间加设万向头及在试件上直接测量应变等新的实验技术及采用新的数据处理方法,提高了试验结果的精确度和可信度;简要介绍了利用ф100 SHPB装置对四种体积含量(0,2%,4%和6%)钢纤维高强混凝土进行三种应变率(10~20/s,35~45/s和75~85/s)的冲击压缩实验。实验结果表明,钢纤维高强混凝土具有较强的应变率效应,其破坏应力、峰值应变随应变率增加而显著增加,弹性模量也随应变率增加而增加。另外,钢纤维含量对混凝土具有增韧效应,随着钢纤维含量的增加,其韧性增大,脆性降低。     

Specimen-Bar Impedance Mismatch Effects on Equilibrium and Rate Constancy for Kolsky Bar Experiments

During a Kolsky bar, also known as a split Hopkinson pressure bar (SHPB), experiment, stress equilibrium and strain rate constancy conditions directly contribute to the measurement quality for rate-sensitive materials. A Kolsky bar specimen is initially at rest, and then gradually accelerated to a desired rate. Stress equilibrium is incrementally achieved by multiple stress pulse reflections inside the specimen to reach the desired mean stress. The critical time to achieve constant strain rate and equilibrium stress depends on the impedance mismatch between the bars and the specimen. This paper examined this critical time based on using linear elastic specimens under uniaxial compression. In the first part, the critical time is experimentally measured for PMMA specimens loaded by aluminum, titanium, and steel bars using linear ramp incident pulses. The results show that increasing impedance mismatch increases the time to reach a constant rate, while the time to satisfy equilibrium remains nearly the same. In the second part, optimal bilinear-shaped incident loadings were evaluated and shown to achieve both conditions faster than linear loadings. The time to satisfy both conditions was mapped via simulation using various bilinear pulses over a wide range of impedance mismatches. The analysis shows bilinear loadings with initial rise time between 1.75 and 2.15 transits in the sample require minimum time to equilibrium. There exists an optimum region of bilinear loadings that can reduce the time to reach constant rate. Within such region, the bilinear slope ratio can be approximated to be a reciprocal function of initial rise time.     

炮钢材料等离子淬火后动态力学性能研究

为提高炮钢材料在较高冲击作用下的动态力学性能,采用等离子淬火技术对炮钢材料进行表面处理,并使用分离式霍普金森压杆(SHPB)系统对原始炮钢材料与等离子淬火后的炮钢材料进行对比分析,方法为对两种试样在试验前后的长度压缩量以及二者在不同应变率下的动态应力-应变曲线进行比较。结果表明,随着应变率的增加两种试样的应力-应变关系、屈服强度都有不同程度的强化效应,都表现出一定的应变率敏感性;在相同气压下两种试样在长度方向上都产生了一定的塑性变形,但淬火试样的压缩量明显小于原始试样。并且气压相同时试样经过等离子淬火后其抗冲击性能有显著提升,具体表现为应变与应变率降低,屈服强度与极限强度升高。     

一种改进的金属材料的高温动态拉伸实验技术

在旋转盘冲击拉伸实验装置上,利用金属材料自身的导电特性,对试样施加电流.使其在电流作用下发热,实现自加热,形成了试件快速加热而波导杆温升很小的金属材料的动态高温高应变率拉伸实验技术.应用该实验技术获取了45 #钢从室温到1000℃温度范围和应变率650s-1时的材料动态拉伸应力—应变曲线.实验结果表明,45 #钢具有明显的热软化效应,其流动应力和屈服应力随温度的升高而降低.     

聚氨酯泡沫塑料在应力波加载下的压缩力学性能研究

通过ＳＨＰＢ冲击实验装置研究了硬质聚氨酯泡沫塑料在应力波加载下的动态力学性能，得到了泡沫塑料在较高应变率下的应力－应变曲线；确定了泡沫塑料的动态屈服强度和动态弹性模量等力学参数，并同落锤冲击实验及准静态压缩实验的结果进行了比较。