Characterization of the alignment of a nematic liquid crystal using half leaky guided modes

The excitation of half leaky guided optical modes to characterize fully the optical tensor profile in a thin liquid crystal layer has been used to evaluate the effect of rubbed polyimide aligning layers on the alignment of a nematic liquid crystal. A cell fabricated with rubbed polyimide alignment surfaces was studied at a wavelength of 632.8 nm. The liquid crystalline layer is sandwiched between a high refractive index top glass plate and a low refractive index glass substrate. Angular dependent reflectivities are recorded using a coupling prism and matching fluid with the same index as the top glass plate. Careful fitting of the predictions from multilayer optics theory to the observed angle dependent polarization conversion and reflectivity data yields the director profile within the liquid crystal layer in great detail.     

Alignment of liquid crystals using Langmuir‒Blodgett films of unsymmetrical bent-core liquid crystals

ABSTRACT

The properties of the thin films of liquid crystal (LC) molecules can be governed easily by external fields. The anisotropic structure of the LC molecules has a large impact on the electrical and optical properties of the film. The Langmuir monolayer (LM) of LC molecules at the air–water interface is known to exhibit a variety of surface phases which can be transferred onto a solid substrate using the Langmuir?Blodgett (LB) technique. Here, we have studied the LM and LB films of asymmetrically substituted bent-core LC molecules. The morphology of LB film of the molecules is found to be a controlling parameter for aligning bulk LC in the nematic phase. It was found that the LB films of the bent-core molecules possessing defects favour the planar orientation of nematic LC, whereas the LB films with fewer defects show homeotropic alignment. The defect in LB films may introduce splay or bend distortions in the nematic near the alignment layer which can govern the planar alignment of the bulk LC. The uniform layer of LB film facilitates the molecules of nematic to anchor vertically due to a strong van der Waals interaction between the aliphatic chains leading to a homeotropic alignment.     

Determination of the surface anchoring potential of a nematic in contact with a substrate

We have developed a method for determining the surface anchoring potential for nematics in contact with a substrate that provides director alignment. Our main result is that the surface torque and hence the anchoring potential may be determined from either dielectric or optical phase response of a nematic undergoing a Freedericksz transition. The method is based on the Frank-Oseen continuum theory, and makes no assumptions about the functional form of the potential. We have measured the surface anchoring potential of two types of substrate in contact with the nematic liquid crystal 4-n-pentyl-4′-cyanobiphenyl. The surfaces were ITO-coated float glass, coated either with obliquely evaporated SiO or a buffed polymer film. Comparison of the results obtained from capacitance and optical measurements provides an estimate of the goodness of the method.     

Self-alignment of dye molecules in micelles and lamellae for three-dimensional imaging of lyotropic liquid crystals

We report alignment of anisotropic amphiphilic dye molecules within oblate and prolate anisotropic micelles and lamellae, the basic building blocks of surfactant-based lyotropic liquid crystals. Absorption and fluorescence transition dipole moments of these dye molecules orient either parallel or orthogonal to the liquid crystal director. This alignment enables three-dimensional visualization of director structures and defects in different lyotropic mesophases by means of fluorescence confocal polarizing microscopy and two-photon excitation fluorescence polarizing microscopy. The studied structures include nematic tactoids, Schlieren texture with disclinations in the calamitic nematic phase, oily streaks in the lamellar phase, developable domains in the columnar hexagonal phase, and various types of line defects in the discotic cholesteric phase. Orientational three-dimensional imaging of structures in the lyotropic cholesterics reveals large Burgers vector dislocations in cholesteric layering with singular disclinations in the dislocation cores that are not common for their thermotropic counterparts.     

A mathematical model for blade coating of a nematic liquid crystal

The standard industrial process of blade-coating is now being used to produce new liquid crystal displays (LCDs) in which a liquid crystal and optical layers are coated onto a substrate. Motivated by this new LCD manufacturing process, we use the Ericksen-Leslie equations to develop a simple mathematical model for blade coating of a nematic liquid crystal. The direction and uniformity of the director are important factors for the performance of the displays, particularly when this alignment is 'frozen in' within optical layers. For this reason we investigate the flow and director within a liquid crystal film both after emerging from the region under a blade (the so-called 'drag-out' problem) and before entering the region under a blade (the so-called 'drag-in' problem). We restrict our attention to thin films and small director angles, and we study two particular cases in which either orientational elasticity effects or flow effects dominate the alignment of the liquid crystal. We find that there is a unique solution of the drag-out problem, whereas there may be multiple solutions of the drag-in problem. When orientational elasticity effects dominate we obtain a simple analytical solution for the director. When flow effects dominate we find that the director is uniform in the bulk of the liquid crystal, which exhibits thin orientational boundary layers near the substrate and the free surface, within which the director orientation changes rapidly from its prescribed boundary value to the flow alignment angle. These boundary layers may be potential locations for the nucleation of defects.     

Weak surface anchoring energy of 4-cyano-4'-pentyl-1,1'-biphenyl on perfluoropolyether Langmuir-Blodgett films

Functional director alignment layers are needed for high performance liquid crystal displays (LCDs). Reported herein is a novel polymer material for LC alignment, namely, perfluoropolyether (PFPE), which exhibits a weak surface anchoring energy for bend deformation and is amenable to simple fabrication of grooved surfaces by soft lithography, a surface topography desired for multistable LCDs. Liquid crystal optical cells fabricated using Langmuir-Blodgett films of PFPE (of variable thickness) exhibited weak surface anchoring energies on the order of 10(-5) Jm2 for the nematic liquid crystal 4-cyano-4'-pentyl-1,1'-biphenyl with no dependence on film thickness.     

The effect of surface polarity of glass on liquid crystal alignment

The effects of the surface polarity of a glass substrate on the orientation of nematic liquid crystals (LCs) were studied using the polarised optical microscope and Fourier-transform infrared spectroscopy. On the surface of oxygen plasma treated glass, a homeotropic alignment of LCs was induced for LCs with negative dielectric anisotropy. This suggests that vertical orientation of LCs could be induced on a polar glass substrate without using an LC alignment layer. Upon cooling towards the isotropic–nematic transition, E7 with positive dielectric anisotropy changes its LC arrangement to isotropic, homeotropic, planar orientations in order. The nematic LC anchoring transition of E7 was interpreted by considering the competition between van der Waals forces and dipole interactions that control the alignment of LC molecules on a polar glass surface.     

Alignment of carbon nanotubes in nematic liquid crystals

The self-organizing properties of nematic liquid crystals can be used to align carbon nanotubes dispersed in them. Because the nanotubes are so much thinner than the elastic penetration length, the alignment is caused by the coupling of the unperturbed director field to the anisotropic interfacial tension of the nanotubes in the nematic host fluid. In order to relate the degree of alignment of the nanotubes to the properties of the nematic liquid crystal, we treat the two components on the same footing and combine Landau-de Gennes free energies for the thermotropic ordering of the liquid crystal and for the lyotropic nematic ordering of carbon nanotubes caused by their mutually excluded volumes. The phase ordering of the binary mixture is analyzed as a function of the volume fraction of the carbon nanotubes, the strength of the coupling and the temperature. We find that the degree of ordering of the nanorods is enslaved by the properties of the host liquid and that it can be tuned by raising or lowering the temperature or by increasing or decreasing their concentration. By comparing the theory to recent experiments, we find the anchoring energy of multiwalled carbon nanotubes to be in the range from 10(-10) to 10(-7) N m(-1).     

Anchoring and electro-optical dynamics of thin liquid crystalline films in a polyimide cell: experiment and theory

The surface-dependent anchoring and electro-optical (EO) dynamics of thin liquid crystalline films have been examined using Fourier transform infrared spectroscopy. A simple nematic liquid crystal, 4-n-pentyl-4'-cyanobiphenyl (5CB), is confined as 40, 50, and 390 nm thick films in nanocavities defined by gold interdigitated electrode arrays (IDEAs) patterned on polyimide-coated zinc selenide (ZnSe) substrates [Noble et al., J. Am. Chem. Soc. 124, 15020 (2002)]. New strategies for controlling the anchoring interactions and EO dynamics are explored based on coating a ZnSe surface with an organic polyimide layer in order to both planarize the substrate and induce a planar alignment of the liquid crystalline film. The polyimide layer can be further treated so as to induce a strong alignment of the nematic director along a direction parallel to the electrode digits of the IDEA. Step-scan time-resolved spectroscopy measurements were made to determine the rate constants for the electric-field-induced orientation and thermal relaxation of the 5CB films. In an alternate set of experiments, uncoated ZnSe substrates were polished unidirectionally to produce a grooved surface presenting nanometer-scale corrugations. The dynamical rate constants measured for several nanoscale film thicknesses and equilibrium organizations of the director in these planar alignments show marked sensitivities. The orientation rates are found to vary strongly with both the magnitude of the applied potential and the initial anisotropy of the alignment of the director within the IDEA. The relaxation rates do not vary in this same way. The marked variations seen in EO dynamics can be accounted for by a simple coarse-grained dynamical model.     

Alignment of a nematic liquid crystal using substituted calixarene Langmuir-Blodgett films

The alignment of a nematic liquid crystal (5CB) induced by several substituted calixarene-based films is reported. Calixarene molecules consisting of four or six moieties and different substituents (acyl and azobenzene groups) were synthesized. Films of such molecules were deposited using a Langmuir-Blodgett technique onto glass plates and were characterized using atomic force microscopy. These treated plates were used to prepare liquid crystal cells, and the overall alignment studied. In the case of photosensitive molecules, photoinduced reorientation experiments were undertaken and are reported. It is shown that it is not important to have a large number of interacting sites on the surface to induce a reorientation of the liquid crystal.     

Alignment of a nematic liquid crystal using substituted calixarene Langmuir-Blodgett films

The alignment of a nematic liquid crystal (5CB) induced by several substituted calixarene-based films is reported. Calixarene molecules consisting of four or six moieties and different substituents (acyl and azobenzene groups) were synthesized. Films of such molecules were deposited using a Langmuir-Blodgett technique onto glass plates and were characterized using atomic force microscopy. These treated plates were used to prepare liquid crystal cells, and the overall alignment studied. In the case of photosensitive molecules, photoinduced reorientation experiments were undertaken and are reported. It is shown that it is not important to have a large number of interacting sites on the surface to induce a reorientation of the liquid crystal.     

The alignment of nematic liquid crystals on photolithographic micro-groove patterns

The alignment of nematic liquid crystals on micro-groove patterns was studied. It has been found that the order of the alignments is determined by the edge shape, spacing, and line pitch of the micro-groove patterns. On coarse patterns, with pitches greater than 2 μm, striped patterns of the liquid crystal alignment were observed using polarized light which manifested different orientations of the liquid crystals on the top, edge, and bottom of the grooves, respectively. On fine patterns, with pitches less than 2 μm, a uniform device-quality alignment has been realized, with which twisted nematic cells were constructed in combination with the rubbed alignment layer on the opposite substrate. Their viewing angle characteristics and tilt orientations of the director were also investigated.     

The alignment of nematic liquid crystals on photolithographic micro-groove patterns

Abstract

The alignment of nematic liquid crystals on micro-groove patterns was studied. It has been found that the order of the alignments is determined by the edge shape, spacing, and line pitch of the micro-groove patterns. On coarse patterns, with pitches greater than 2 μm, striped patterns of the liquid crystal alignment were observed using polarized light which manifested different orientations of the liquid crystals on the top, edge, and bottom of the grooves, respectively. On fine patterns, with pitches less than 2 μm, a uniform device-quality alignment has been realized, with which twisted nematic cells were constructed in combination with the rubbed alignment layer on the opposite substrate. Their viewing angle characteristics and tilt orientations of the director were also investigated.     

Defect formation in N* LCs via photovoltaic fields: impact of surface treatment

ABSTRACT

Field-induced defect creation was investigated in chiral nematic liquid crystal test cells, where a Fe-doped lithium niobate thin-cut was applied as field generating substrate. These photo responsive test cells were exposed to focused continuous wave laser light, which resulted in the formation of localised defects. The covering indium tin oxide coated glass of the test cells was treated with a polyvinyl alcohol alignment layer. This alignment layer was either applied with a doctor blade technique or by spin casting of a polyvinyl solution, which was thermally annealed, subsequently. The surface roughness of the alignment layers was investigated with atomic force microscopy, which was interesting to understand how defects and locally lying helices were supported or suppressed in various samples. Well-confined circular defects were formed in test cells with spin-casted alignment layers and the appearance and unwanted interaction with oily streaks could be efficiently reduced in these samples. The results are promising. Samples with an oily streak-free homogenous standing helix orientation of the chiral nematic liquid crystal are an ideal canvas for rewritable pattern formation in a chiral nematic LC: Such samples have high potential as reconfigurable diffractive elements such as rewritable diffraction gratings.     

Langmuir–Blodgett films of stearic acid deposited on substrates at different orientations relative to compression direction: alignment layer for nematic liquid crystal

The Langmuir monolayer at an air–water interface shows remarkably different surface pressure (π)–area (A) isotherm, when measured with the surface normal of a Wilhelmy plate parallel or perpendicular to the direction of compression of the monolayer. Such difference arises due to difference in stress exerted by the monolayer on the plate in different direction. In this article, we report the effect of changing the direction of substrate normal with respect to the compression of the monolayer during Langmuir–Blodgett (LB) film deposition on the morphology of the films. The morphology of the LB film of stearic acid is studied using an atomic force microscope. The morphology of the LB films is found to be different due to difference in the stress in different directions. The role of such surface morphology on the alignment of a nematic liquid crystal (LC) in LC cells is studied. The granular texture of LB films of stearic acid supports the homogeneous alignment of the LC whereas the uniform texture supports the homeotropic alignment of the LC.     

Anchoring transitions and periodic deformations in nematic slabs

Elastic energy terms linear in the deformation tensor can appear in an ultrathin layer at the interface of a nematic liquid crystal with a substrate. These Lifchitz invariant like terms can destroy an initially uniform alignment. In particular, they can induce modulated structures. The instability towards a periodic deformation of the nematic director can occur only if the anchoring energy is lower, and the elastic constant of the Lifchitz term is larger than well-defined critical values. The present phenomenological model accounts for experimental observations where a homeotropic slab undergoes, upon cooling, a tilt transition followed by a structural transition towards a stripe texture.     

Modelling of the simple shear flow of a flow-aligning nematic

The shear flow induced deformations of a nematic liquid crystal layer have been modelled numerically for the case of flow-aligning nematics. The director deviation from the plane of shear, which was predicted earlier for special surface orientation angles, has been confirmed. This deformation takes a form of director rotation about the axis perpendicular to the layer plane. As a result, transverse flow of the nematic arises. The rotation angle is close to pi at sufficiently strong shear stress, and the director is oriented at the usual flow alignment angle in a significant part of the layer. The director coming out of the shear plane should not be treated as a separate effect taking place during the flow, but rather as a way in which the usual flow-aligned structure is achieved.     

A study of the transition of liquid-crystal alignment from homeotropic to planar on a polyimide layer

The alignment of nematic liquid crystals by rubbed polyimide surfaces has been well-studied and developed. A novel polyimide film which induced a homeotropic alignment of the nematic liquid crystal without rubbing or with weak rubbing strength was presented. However, there was a transition from homeotropic to planar alignment of the nematic liquid crystal after strong rubbing. In order to study the transition, the polyimide surface was investigated by atomic force microscopy, surface free energy measurement and angle-resolved analysis X-ray photo-electron spectroscopy before and after rubbing with a velvet fabric. It was found that both the change of surface polarity and surface morphology were not the reasons for the transition. The droop of the side chain on the polyimide surface after the rubbing treatment was detected by angle-resolved analysis X-ray photo-electron spectroscopy. Owing to the special structure of the novel polyimide, the X-ray photo-electron spectroscopy was successfully used for the first time to analyse the conformational change of the side chain of a polymer. In conclusion, the transition of nematic liquid crystal alignment from homeotropic to planar after rubbing was influenced by the side chain conformation of the polyimide.     

Electrical orientation behaviour of a nematic liquid crystal with negative dielectric anisotropy above the microelectrodes

Factors for the electrical orientation on interdigitated microelectrodes deposited on a substrate, a microdielectrometric sensor (or a sensor), were discussed experimentally using a model nematic liquid crystal with negative dielectric anisotropy. The electrical orientation behaviour of the nematic liquid crystal was investigated using microdielectrometry and polarised optical microscopy. The experimental results were discussed in relation to electric-field line, surface topology, anchoring of the liquid crystalline molecules to the microelectrodes, and transversal rotation of a rode-like molecule of the liquid crystal with negative dielectric anisotropy.     

Application of photosensitive polyimides as alignment layer to optical switching devices of a nematic liquid crystal

We have explored the change in alignment of a nematic liquid crystal, 4'-pentyl-4-cyanobiphenyl (5CB) with three types of photosensitive polyimide as the alignment layer by photoirradiation at 366 nm. The photosensitive polyimide alignment layer induced a reversible change in alignment of 5CB. It was observed that the 5CB molecules became aligned from homogeneous alignment to homeotropic on photoirradiation with a d.c. electric field as a bias, and reversed to the homogeneous state when photoirradiation was ceased. This result indicates that optical switching could be repeated by on and off switching of the excitation light at 366 nm. The optical switching of the nematic liquid crystal might be mainly due to a photophysical change in the polyimide surface which is affected by the chemical structures of the polyimides at the temperature at which 5CB exhibits a nematic phase. The optical switching of nematic liquid crystals with photosensitive polyimides as the alignment layer is a novel driving method for nematic liquid crystals.