复合材料层合开顶扁球壳的非线性动态屈曲

研究了复合材料层合开顶扁球壳的非线性动态屈曲问题。建立了对称层合圆柱正交异性开顶扁球壳考虑横向剪切的非线性振动微分方程,根据突变理论建立了该壳体动态屈曲的突变模型,得到了动态屈曲的临界方程。     

一维六方准晶层合简支梁自由振动与屈曲的精确解

伪Stroh型公式能够将多场耦合材料的控制方程转化为线性特征系统来求解,从而获得多层结构简支边界条件的精确解.本文利用伪Stroh型公式,研究一维六方准晶层合简支梁的自由振动和屈曲问题,通过传递矩阵法,获得准晶层合梁自由振动固有频率与临界屈曲载荷的精确解.通过与已有梁的剪切变形理论结果比较,验证了本文伪Stroh型公式的正确性和有效性.通过数值算例,分析由两种不同准晶材料组成的三明治层合梁的叠层方式、高跨比、层厚比及层数对梁的固有频率、临界屈曲载荷及其模态的影响规律.结果表明,叠层顺序和梁的高跨比、层厚比对准晶层合梁的自由振动固有频率和临界屈曲载荷有很大影响,可通过调整梁的几何尺寸和叠层顺序得到准晶层合梁的最佳固有频率和临界屈曲载荷.本文给出的精确解可为工程上研究准晶梁的各种数值解法和实验方法提供理论参考.     

电活性聚合物圆柱壳静态与动态电压下的响应及稳定性

摘要：在电活性聚合物圆柱壳内外表面施加电压,圆柱壳会变薄并且伸长,因此相同的电压会在圆柱壳内产生更大的电场。这个正反馈可能使圆柱壳厚度不断变薄,最终导致其失稳破坏。本文研究了电活性聚合物圆柱壳在静态和周期电压作用下的响应及稳定性问题。采用neo-Hookean材料模型得到描述圆柱壳表面运动的非线性常微分方程。给出了圆柱壳在不同厚度和边界条件下外加电压随圆柱壳变形的变化曲线,结果表明存在一个临界电压,当外加电压大于这一临界值时,圆柱壳将被破坏。同时,也讨论了厚度和边界条件对临界电压的影响。圆柱壳在正弦周期电压作用下,其运动随时间的变化是周期性的或拟周期性的非线性振动。给出了圆柱壳振动固有频率的计算结果,采用打靶法得到圆柱壳振动的周期解,并且用数值法研究了周期解的稳定性。采用数值仿真得到圆柱壳振动振幅随外加动态电压激励频率的变化曲线,结果表明圆柱壳会发生多频共振,共振时圆柱壳振幅发生跳跃,导致圆柱壳失稳破坏。最后给出共振点临近点的振动曲线和相图,并对其振动特性进行讨论。     

黏弹性层合圆柱壳的临界轴压分析

基于经典屈曲理论，研究了轴向受压黏弹性复合材料层合圆柱壳的临界屈曲载荷. 利用Boltzmann线性积分型本构关系描述铺设单层的各向异性黏弹性行为. 结合解析与数值 方法，由Donnell型屈曲控制方程以及边界条件的Laplace变换导出相空间的特征方程，根 据Laplace逆变换的极值定理，获得层合圆柱壳的瞬时弹性临界载荷与持久临界载荷. 针对 多组铺设方式，通过数值算例重点分析了临界载荷随铺设角的变化特征，两种临界载荷的峰 值点差异程度与铺设方式、几何参数以及材料类型的关系，得到了一些对黏弹性层合圆柱壳 的优化设计有参考价值的结论.     

水下爆炸载荷作用下环肋加筋圆柱壳结构的弹塑性动力屈曲

为研究水下爆炸载荷作用下潜艇结构的动力屈曲现象,以潜艇耐压结构的简化模型环肋加筋圆 柱壳结构为研究对象,建立流固耦合有限元分析模型,应用瞬态有限元分析程序MSC.Dytran对该结构在水 下爆炸冲击载荷作用下的弹塑性动力屈曲行为进行研究,基于Budiansky-Roth准则和Southwell方法确定环 肋加筋圆柱壳结构的临界屈曲载荷,讨论结构动力屈曲的影响因素如载荷强度、网格密度、径厚比、长径比、加 筋截面间距、加筋尺寸等对环肋加筋圆柱壳结构动屈曲模态和临界屈曲载荷的影响。结果表明:采用建立的 流固耦合有限元分析模型,应用动力瞬态有限元软件MSC.Dytran可以对加筋圆柱壳结构的动力屈曲行为进 行模拟,模型网格尺寸大小、结构几何参数对结构的动力屈曲临界载荷都有一定的影响,其中加筋圆柱壳结构 的径厚比对结构的动力屈曲临界载荷影响最为显著。     

BUCKING AND FREE VIBRATION OF PIEZOELECTRIC/PIEZOMAGNETIC LAMINATED NANO-BEAM 1)

针对压电/压磁层合纳米梁屈曲、自由振动问题,基于非局部理论与正弦剪切型变形梁理论,建立了力学模型;利用哈密顿原理推导出层合梁运动方程与边界条件;通过数值解法求得层合梁临界屈曲载荷与自由振动频率。对数值结果分析可知：磁电弹夹层对压电/压磁层合纳米梁屈曲和自由振动的影响不能忽略;磁电弹夹层中压电或压磁材料的体积分数和夹层厚度为主要影响因素;分析得到的影响规律可为此类材料在工程中的应用提供理论参考。     

爆炸冲击下复合材料层合扁球壳的动力屈曲

研究计及横向剪切的复合材料层合扁球壳在爆炸冲击载荷作用下的非线性轴对称动力屈曲问题。通过在复合材料层合扁球壳非线性稳定性的基本方程中增加横向转动惯量项并引入R.H.Cole理论的爆炸冲击力,得到爆炸冲击下复合材料层合扁球壳的动力控制方程,应用Galerkin方法得到用顶点挠度表达的爆炸冲击动力响应方程,并采用Runge-Kutta方法进行数值求解,采用Budiansky-Roth准则确定冲击屈曲的临界载荷,讨论了壳体几何尺寸对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,此方法是可行的。     

也论纤维缠绕层合圆柱壳的优化设计

本文研究了以纤维缠绕层合圆柱壳在轴压下的屈曲载荷及自振基频为目标函数,以各层缠绕角为设计变量的优化设计问题,壳体分析采用的是线性理论,优化程序采用了随机选取法与Powell法相结合的方法。     

变角度纤维复合材料圆柱壳的轴压屈曲

变角度纤维复合材料的纤维方向角可沿铺层面内连续变化,因此相应结构的性能具有更高的设计灵活性和更大的优化空间．本文假设纤维方向角沿圆柱壳的轴向呈正弦函数变化,对变角度纤维复合材料圆柱壳在两端简支边界条件下的轴压屈曲问题进行研究．基于Donnell经典壳体理论,推导变角度纤维复合材料圆柱壳的前屈曲控制方程并运用伽辽金法进行求解,然后采用瑞利里兹法求解屈曲问题．通过和现有文献及有限元数值结果的对比,验证了本文模型的收敛性和正确性,通过数值算例分析了纤维起始角和终止角的变化对圆柱壳的屈曲临界荷载的影响．本文的研究结果可为变角度纤维复合材料圆柱壳的分析和设计提供一定的参考．     

矩形脉冲作用下复合材料层合扁球壳的冲击屈曲分析

研究了计及横向剪切的复合材料层合扁球壳在矩形脉冲载荷作用下的非线性动力屈曲问题;采用Galerkin方法得到以顶点挠度表达的动力响应方程,并用Runge-Kutta方法进行数值求解,应用Budiansky-Roth准则(简称B-R准则)确定冲击屈曲的临界荷载;讨论了壳体几何尺寸和物理参数对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,该方法是可行的.     

Nonlinear finite element analysis of laminated composite spherical shell vibration under uniform thermal loading

In this article, nonlinear free vibration behavior of laminated composite shallow shell under uniform temperature load is investigated. The mid-plane kinematics of the laminated shell is evaluated based on higher order shear deformation theory to count the out of plane shear stresses and strains accurately. The nonlinearity in geometry is taken in Green-Lagrange sense due to the thermal load. In addition to that, all the nonlinear higher order terms are taken in the mathematical model to capture the original flexure of laminated panel. A nonlinear finite element model is proposed to discretise the developed model and the governing equations are derived using Hamilton’s principle. The sets of governing equations are solved using a direct iterative method. In order to validate the model, the results are compared with the available published literature and the limitations of the existing models have been discussed. Finally, some numerical experimentation has been done using the developed nonlinear model for different parameters (thickness ratio, curvature ratio, modular ratio, support condition, lamination scheme, amplitude ratio and thermal expansion coefficient) and their effects on the responses are discussed in detail.     

Buckling and Postbuckling of Laminated Thin Cylindrical Shells under Hygrothermal Environments

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｌａｍｉｎａｔｅｄｓｈｅｌｌｓｔｒｕｃｔｕｒｅｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅａｅｒｏｓｐａｃｅ ,ｍａｒｉｎｅｉｎｄｕｓｔｒｙ ,ａｕｔｏｍｏｂｉｌｅｉｎｄｕｓｔｒｙａｎｄｏｔｈｅｒｅｎｇｉｎｅｅｒｉｎｇａｐｐｌｉｃａｔｉｏｎｓ.Ｄｕｒｉｎｇｔｈｅｏｐｅｒａｔｉｏｎａｌｌｉｆｅ ,ｔｈｅｖａｒｉａｎｃｅｏｆｔｅｍｐｅｒａｔｕｒｅａｎｄｍｏｉｓｔｕｒｅｒｅｄｕｃｅｓｔｈｅｅｌａｓｔｉｃｍｏｄｕｌｉ…     

Buckling and post-buckling analyses for an axially compressed laminated cylindrical shell of FGM with PFRC in thermal environments

In this paper, investigation on buckling and post-buckling behaviors of a laminated cylindrical shell of functionally graded material (FGM) with the piezoelectric fiber reinforced composite (PFRC) actuators subjected to thermal and axial compressed loads is presented. Based on the Donnell assumptions, the material properties of the FGM layer vary smoothly through the laminated cylindrical shell thickness according to a power law distribution of the volume fraction of constituent materials. In the present study, a numerical procedure for the laminated cylindrical shell is used based on the Ritz energy method and the nonlinear strain–displacement relations. Some useful discussion and numerical examples are presented to show various effects of temperature field, volume fraction and geometric parameters on the buckling and post-buckling behaviors of the laminated cylindrical shell with PFRC.     

Postbuckling of pressure-loaded shear deformable laminated cylindrical panels

IntroductionInrecentyears,fiber_reinforcedcompositelaminatedpanelshavebeenwidelyusedintheaerospace,marine ,automobileandotherengineeringindustries .Theproblemofbucklingandpostbucklingofcylindricalpanelsunderaxialcompressionortorsionhasbeenextensivelystudied .Incontrast,theliteratureoncylindricalpanelsunderpressureloadingisrelativelyspares.Thesestudiesincludealinearbucklinganalysis (Singeretal.[1]) ,anonlinearbucklinganalysi(YamadaandCroll[2 ]) ,anelastoplasticbucklinganalysisusingreducedstif…     

Postbuckling analysis of axially-loaded laminated cylindrical shells with piezoelectric actuators

A compressive postbuckling analysis is presented for a laminated cylindrical shell with piezoelectric actuators subjected to the combined action of mechanical, electric and thermal loads. The temperature field considered is assumed to be a uniform distribution over the shell surface and through the shell thickness, and the electric field is assumed to be the transverse component E_Z only. The material properties are assumed to be independent of the temperature and the electric field. The governing equations are based on the classical shell theory with von Kármán–Donnell-type kinematic nonlinearity. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of hybrid laminated cylindrical shells. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the compressive postbuckling behavior of perfect and imperfect, cross-ply laminated cylindrical thin shells with fully covered or embedded piezoelectric actuators under different sets of thermal and electric loading conditions. The effects played by temperature rise, applied voltage, shell geometric parameter, stacking sequence, as well as initial geometric imperfections are studied.     

ACTIVE CONTROL OF THE PIEZOELASTIC LAMINATED CYLINDRICAL SHELL''''S VIBRATION UNDER HYDROSTATIC PRESSURE

IntroductionDuetotheintrinsicdirectandconversepiezoelectriceffects,piezoelectricmaterialscanbeeffectivelyusedtoproducesensorsoractuatorsfortheactiveshapeorvibrationcontrolostructures.Therefore,theuseofpiezoelectricmaterialsinintelligentstructuresattractedmanyattentionsinrecentyears.Thedesignofsuchactivesystemsrequiresgoodunderstandingofthemechanical_electricinteractionbetweenthestructuresandpiezoelectricmaterials.Manyinvestigationshavebeendoneinthisfield[1].However,mostofthesestudiesarebasedo…     

层合圆柱壳的振动与横向应力

应用分层壳理论并在壳厚方向彩二次插值函数推导出正交层合圆醉壳的动力学方程,并得出了简支层合圆柱壳自由振动方程的解,所给出的振动频率与三维分析的结果吻合良好,计算了前四阶模态对应的壳中应力,与第三、四阶模态对应的横向正应力与面内应力的比值远高于第一、二阶模态的应力比,计算结果说明,很高的横向正应力是高频动力响应中导致分层壳脱层破坏的一个主要因素。     

Free vibration and critical speed of moderately thick rotating laminated composite conical shell using generalized differential quadrature method

The generalized differential quadrature method (GDQM) is employed to consider the free vibration and critical speed of moderately thick rotating laminated composite conical shells with different boundary conditions developed from the first-order shear deformation theory (FSDT). The equations of motion are obtained applying Hamilton’s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points lying on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical technique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.