Kinetics and mechanism of the reaction between bis 4-(2-pyridylazo)resorcinol ferrate(III) complex and cyanide ion

Summary Kinetics and mechanism of formation of a 113 mixed cyano-complex from [Fe^III (Par)₂]^– (where Par represents 4-(2-pyridylazo)resorcional) and cyanide ion has been studied spectrophotometrically at 720 nm [_max=Fe^(III)(Par) ₂ ^– ], pH=10.0±0.02, temp=25±0.1°C and 1=0.1 M (NaClO₄). The order with respect to cyanidevaries from one to two at high and low cyanide concentrations respectively. The rate constants for respective reactions are k₁=10.8±0.6×10^–2 M^–1 s^–1, k₂=7.7±0.5 M^–2 s^–1. The reverse reaction does not occur at a measurable rate even in presence of large excess of par. These observations suggest that Fe^III (Par) ₂ ^– forms a mixed complex, [FePar(CN)₃]^2-, in presence of an excess of cyanide ions. A three-step mechanism consistent with these results is proposed. The activation parameters for the reaction have been derived and used to support the proposed mechanism. The effect of ionic strength lends further support to the mechanism.     

Kinetics of the thermal and photochemical decomposition of aquapentacyanoferrate(III) in aqueous solution

Summary The kinetics of the thermal and photochemical decomposition of aquapentacyanoferrate(III) ion in aqueous solution in the presence ofo-phenanthroline was studied spectrophotometrically. The first-order rate constant (k ) at 30° C [I=1 M(NaCl)] for the thermal reaction is (1.49±0.13)×10^–6 s^–1 with H =(158±7)kJ mol^–1 and S=(42±4) JK^–1 mol^–1. The initial quantum yield for the photochemical reaction at pH=7 is independent of the light intensity and is (1.49±0.33)×10^–2 mol einstein^–1.A communication on this subject was presented at the XVI Latinamerican Chemistry Congress held at Rio de Janeiro. Brasil, October 14–20, 1984.     

Kinetics and mechanism of formation and dissociation of copper(II) and nickel(II) complexes of the Schiff base bis(acetylacetone)ethylenediimine in aqueous-organic solvent media

Summary In NH₄NO₃+NH₄OH buffered 10% (v/v) dioxan-water media (pH 7.0–8.5), thePseudo-first-order rate constant for the formation of the title complexes M(baen),i.e. ML, conforms to the equation 1/k_obs=1/k+1/(kK_o.s · T_L), where T_L stands for the total ligand concentration in the solution, K_o.s is the equilibrium constant for the formation of an intermediate outer sphere complex and k is the rate constant for the formation of the complex ML from the intermediate. Under the experimental conditions the free ligand (pK_a>14) exists virtually exclusively in the undissociated form (baenH₂ or LH₂) which is present mostly as a keto-amine in the internally hydrogen-bonded state. Although the observed formation-rate ratio k^Cu/k^Ni is of the order of 10⁵, as expected for systems having normal behaviour, the individual rate constants are very low (at 25°C, k^Cu=50 s^–1 and k^Ni=4.7×10^–4s^–1) due to the highly negative S values (–84.2±3.3 JK^–1M^–1 for CuL and –105.8±4.1 JK^–1M^–1 for NiL); the much slower rate of formation of the nickel(II) complex is due to higher H value (41.2±1.0 kJM^–1 for CuL and 78.2±1.2 kJM^–1 for NiL) and more negative S value compared to that of CuL. The K_o.s values are much higher than expected for simple outer-sphere association between [M(H₂O)₆] and LH₂ and may be due to hydrogen bonding interaction.In acid media ([H⁺], 0.01–0.04 M) these complexes M(baen) dissociate very rapidly into the [M(H₂O)₆]²⁺ species and baenH₂, followed by a much slower hydrolytic cleavage of the ligand into its components,viz. acetylacetone and ethylenediamine (protonated). For the dissociation of the complexes k_obs=k₁[H⁺]+k₂[H⁺]². The reactions have been studied in 10% (v/v) dioxan-water media and also ethanolwater media of varying ethanol content (10–25% v/v) and the results are in conformity with a solvent-assisted dissociativeinterchange mechanism involving the protonated complexes.     

An equilibrium and calorimetric investigation of the hydrolysis of L-tryptophan to (indole + pyruvate + ammonia)

Apparent equilibrium constants and calorimetric enthalpies of reaction have been measured for the reaction L-tryptophan(aq) + H₂O(l) = indole(aq) + pyruvate(aq) + ammonia(aq) which is catalyzed by L-tryptophanase. High-pressure liquid-chromatography and microcalorimetery were used to perform these measurements. The equilibrium measurements were performed as a function of pH, temperature, and ionic strength. The results have been interpreted with a chemical equilibrium model to obtain thermodynamic quantities for the reference reaction: L-tryptophan(aq) + H₂O(l) = indole(aq) + pyruvate^–(aq) + NH ₄ ⁺ (aq). At T=25°C and I_m=O the results for this reaction are: K^o=(1.05±0.13)×10^–4, G°=(22.71±0.33) kJ-mol^–1, H°=(62.0±2.3) kJ-mol^–1, and S°=(132±8) J-K^–1-mol^–1. These results have been used together with thermodynamic results from the literature to calculate standard Gibbs energies of formation, standard enthalpies of formation, standard molar entropies, standard molar heat capacities, and standard transformed formation properties for the substances participating in this reaction.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Kinetic and mechanistic studies on the interaction of thymidine with the hydroxopentaaquarhodium(III) ion

The interaction of thymidine, a nucleoside, with hydroxopentaaquarhodium(III), [Rh(H₂O)₅(OH)]²⁺ ion in aqueous medium is reported and the possible mode of binding is discussed. The kinetics of interaction between thymidine and [Rh(H₂O)₅OH]²⁺ has been studied spectrophotometrically as a function of [Rh(H₂O)₅OH²⁺], [thymidine], pH and temperature. The reaction has been monitored at 298 nm, the _max of the substituted complex, and where the spectral difference between the reactant and product is a maximum. The reaction rate increases with [thymidine] and reaches a limiting value at a higher ligand concentration. From the experimental findings an associative interchange mechanism for the substitution process is suggested. The activation parameters (H=47.8 ± 5.7 kJ mol^–1, S=–173 ± 17 J K^–1 mol^–1) supports our proposition. The negative G⁰ (–13.8 kJ mol^–1) for the first equilibrium step also supports the spontaneous formation of the outer sphere association complex.     

Tin(IV) complexes ofSchiff bases derived from salicylaldehyde and aminoalcohols

11 and 12 molar reactions of tin(IV) chloride with theSchiff bases, HO–C₆H₄CHNROH [where R=–(CH₂)₂–, –CH₂–, –CH(CH₃)–, –(CH₂)₃–, and –CH(C₂H₅)CH₂–] have been studied in different stoichiometric ratios and derivatives of the type SnCl₄(SBH₂) and SnCl₄(SBH₂)₂ (whereSBH₂ represents theSchiff base molecule) have been isolated. These have been characterised by elemental analysis, conductivity measurements and I.R. spectral studies.     

Peroxide derivatives of molybdenum(VI) in neutral and alkaline media

Summary The peroxidation of molybdenum(VI) was investigated in neutral and alkaline media. The stability constants of the peroxo complexes were determined by spectrophotometric measurement as (9.12±0.67)×10^–7, (2.68±0.17) ×10⁵, (1.26±0.06)×10⁶ and (1.58±0.02) for the 11, 21 (yellow), 31 and 41 (red) species. The diperoxomolybdate disproportionates into the tetraperoxo derivative when treated with alkali. Formation of the tetraperoxo complex was found to be pH dependent according to a curve, with maximum at pH 10. Acidification of tetraperoxomolybdate solution results in the regeneration of hydrogen peroxide and the diperoxo complex is reformed.     

Interaction of tin (IV) chloride with sulfolane and between tin (IV) chloride and lithium chloride in sulfolane solution

Tin (IV) chloride reacts with sulfolane (S) to form a cis-octahedral adduct SnCl₄·S₂. Solutions of lithium chloride and tin (IV) chloride in sulfolane contain the complex ions SnCl ₅ ^– and SnCl ₆ ^2– at 11 and 21 mole ratios of constituents, respectively. The complexes are characterized by conductimetry and by Mössbauer, IR, and Raman spectroscopy.     

Steric structure and thermodynamic aspects of the complexes of dysprosium(iii) with aminobenzoic acids in aqueous solutions

Steric structures of dysprosium(III) aminobenzoate complexes with the 11 and 12 molar ratio in aqueous solutions were determined on the basis of pH-metric and paramagnetic birefringence data. An increase in conjugation observed for the series of the acids,viz., benzoic,meta-, ortho-, andpara-aminobenzoic acids, results in the increased stability of the complexes with the 11 and 12 composition. In the case ofpara-aminobenzoic acid, the polyhedra [DyL(H₂O)₆]²⁺ and [DyL₂(H₂O)₄]⁺ are cubes with the ligands coordinated to one and two edges, respectively. In the case ofmeta-aminobenzoic acid, the polyhedra [DyL(H₂O)₆]²⁺ and [DyL₂(H₂O)₄]⁺ are a dodecahedron with the ligand coordinated to one edge and a square anti-prism with the ligands coordinated to two edges, respectively. In the case ofortho-aminobenzoic acid, both the 11 and 12 complexes have structures that are intermediate between the structures ofmeta- andpara-aminobenzoic acids.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1767–1770, October, 1994.     

4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione (THBIT), a new reagent for the spectrophotometric determination of palladium

Summary 4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione, THBIT, is proposed as a new reagent for the spectrophotometric determination of Pd(II). Pd(II) forms 11, 12 and 14 complexes with THBIT. The system conforms to Beer's law up to 5g/ml palladium concentration in aqueous medium (molar absorptivity, 1.99×10⁴ l· mole^–1·cm^–1 at 338 nm). The most serious interference is from Hg(II), Os(VIII), Ru(IV), Cr(VI), V(V) and S₂O₃ ^2–. The method has been used successfully for the determination of palladium in catalysts and synthetic samples.     

Kinetics of substitution of aqua ligands from cis-diaqua(ethylenediamine)platinum(II) perchlorate by DL-penicillamine in aqueous medium

The kinetics of the interaction of DL-penicillamine with [Pt(en)(H₂O)₂]²⁺ have been studied spectrophotometrically as a function of [Pt(en)(H₂O)₂]²⁺, [DL-penicillamine] and temperature at pH 4.0. The reaction proceeds via rapid outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex and the second is the slower chelation step whereby another aqua ligand is replaced. The association equilibrium constant (K _E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (H ₁ = 46.5 ± 5.0 kJ mol^–1, S ₁ = – 143.0 ± 15.0 J K^–1 mol^–1, H ₂ = 44.3 ± 1.3 kJ mol^–1, S ₂ = –189.0 ± 4.2 J K^–1 mol^–1). The low enthalpy of activation and large negative entropy of activation values indicate an associative mode of activation for both aqua ligand substitution processes.     

Decomposition kinetics ofbis(biguanide)silver(III) cation in acid perchlorate media

Summary In acid perchlorate media, the title complex undergoes intramolecular redox decomposition generating ultimately Ag⁺ ion and oxidation products of the ligand. The reaction follows a simple first-order process, and the observed pseudo-first-order rate constant is given by k_obs=k₀+kK_a/[H⁺] where K_a is the deprotonation constant of the parent complex; pK_a is approximately 5.9 at 30°. The values of 10⁵ k₀(s^–1) and 10⁷ kK_a (Ms^–1) at 30°, I=1.0 M, are 9.3±0.1 and 11.8±1.3; corresponding H (kJ/mol), S (JK^–1 M^–1) values are 105±0.5, 23±1 and 79±8,-96±5, respectively. The results are compared with those for similar reaction of (ethylenebisbiguanide)silver(III) and effect of change in ligand structure on kinetic behaviours of these complexes is discussed.     

Complex formation between nickel(II) and 2-(2-aminoethyl) benzimidazole: A kinetic and equilibrium study

Summary The reversible complex formation between 2-(2-aminoethyl) benzimidazole (AEB) and nickel(II) was studied by stopped flow spectrophotometry at I = 0.30 mol dm^–3. Both the neutral and monoprotonated form of AEB reacted to give the NiAEB²⁺ chelate. At 25 °C, the rates and activation parameters for the reactions Ni_II + AEB NiAEB²⁺ and Ni^II + AEBH⁺ NiAEB²⁺ + H⁺ are k _f ^L(dm^–3 mol^–1 s^–1) = (2.17 ± 0.24) × 10³, H (kJ mol^–1) = 40.0 ± 0.8, S (JK^–1 mol^–1) = – 47 ± 3 and k _inff ^pHL (dm³ mol^–1 s^–1) = 33 ± 10, H (kJ mol^–1) = 42.0 ±2.7, S (JK^–1 mol^–1) = – 72 ± 9. The dissociation of NiAEB²⁺ was acid catalysed and k _obs for this process increased linearly with [H⁺] in the 0.01–0.15 mol dm^–3 (10–30 °C) range with k _H(dm³ mol^–1s^–1) (25 °C) = 329 ± 6, H (kJ mol^–1) = 40 ± 2 and S (JK^–1 mol^–1) = – 61 ± 8. The results also indicated that the formation of NiAEB²⁺ involves a chelation-controlled, rate-limiting process. Analysis of the S ° data for the acid ionisation of AEBH _inf2 ^p2+ and the formation of NiAEB²⁺ showed that the bulky AEBH⁺ ion has a solvent structure breaking effect as compared to AEB [s _aqS ° (AEBH⁺) – s _aq ° (AEB) = 69 JK^–1 mol^–1], while AEBH _inf2 ^p2+ is a solvent ordering ion relative to NiAEB²⁺ [s _aq° (NiAEB²⁺) – ovS _aq ° (AEBH _inf2 ^p2+ ) = 11 JK^–1 mol^–1].Author to whom all correspondence should be directed.     

Chromium(VI), chromium(V) and chromium(IV) oxidation of 12-tungstocobaltate(II)

The reaction between Cr^VI and 12-tungstocobaltate(II) was carried out in 2.0 mol dm^–3 HCl and followed a simple second order rate law. The reaction was catalysed by hydrogen ion due to the formation of active H₂CrO₄ and was inhibited by chloride ion as, in its presence, conversion of the active species into inactive chlorochromate occurs. Chromium(V) and chromium(IV) were generated in situ by the use of Cr^VI—V^IV or Cr^VI—2-ethyl-2-hydroxybutyric acid and Cr^VI—i-PrOH reactions respectively, and the oxidation of 12-tungstocobaltate(II) by these atypical oxidation states, was also studied. The rate constants for the oxidation of 12-tungstocobaltate(II) by Cr^VI, Cr^V and Cr^IV were found to be in the ratio 1:1.2:5.2 respectively. The ionic strength did not affect the reaction, while decrease in the solvent polarity increased the rate of the reaction. The activation parameters were also determined and the values H , G and S were found to be 52.4 ± 6 kJ mol^–1, 100.8 ± 7 kJ mol^–1, –151.7 ± 10 J K^–1 mol^–1 respectively, supporting the mechanism proposed.     

Kinetics and mechanism of pentacyanohydroxoferrate(III) formation from [FeL(OH)2]− complex, (L=N-(2-hydroxyethyl) iminodiacetate anion

Summary The kinetics and mechanism of the system [FeHIDA-(OH)₂]^–+5CN^–[Fe(CN)₅OH^–+HIDA^2–+OH^– (HIDA=N-(2-hydroxyethyl) (iminodiacetate) at pH=9.5±0.02, I=0.1 M and at 25±0.1°C have been studied spectrophotometrically at 395 nm ( _max of [Fe(CN)₅OH]^3–]. The reaction has three distinguishable stages; the first is formation of [Fe(CN)₅OH]^3–, the second is conversion of [Fe(CN)₅OH]^3– into [Fe(CN)₆]^3–, and last is the reduction of [Fe(CN)₆]^3– to [Fe(CN)₆]^4– by the HIDA^2– released in the first stage. The first stage shows variable-order dependence on cyanide concentration, unity at high cyanide concentration and zero at low cyanide concentration. The second stage exhibits first-order dependence on the concentration of [Fe(CN)₅OH]^3– as well as on cyanide. The reverse reaction between [Fe(CN)₅OH]^3– and HIDA^2– is first-order in each of these species and inverse first-order in cyanide. On the basis of forward and reverse rate studies, a five-step mechanism has been proposed for the first stage. The first step involves a slow loss of one OH^–, by a cyanide-independent path.     

Komplexbildung im System Ni2+—o-Methylbenzamidoxim

Zusammenfassung Die Komplexe des Ni²⁺ mit o-Methylbenzamidoxim wurden in neutraler und in alkalischer Lösung spektrophotometrisch untersucht. Die Bildungskonstanten sindK ₁=40 für 11 undK ₂=1,7·10² für 12 in neutraler Lösung und ₁ = =(3,92 ±0,2) · 10⁴für 11 und lgK = lg ₁ + lg ₂ = 3,45 ± ±0,15 für 12 bei 25° und =1 in alkalischer Lösung.

---

Complex formation in the systemeNi ²⁺—o-methylbenzamide oxime

The complexes of Ni²⁺ with o-methylbenzamide oxime were investigated spectrophotometrically in neutral as well as in alkaline solution. The formation constants areK ₁=40 for 11 andK ₂=1.7·10² for 12 in the neutral solution and ₁ = =(3.92 ±0.2) · 10⁴ for 11 and lgK = lg ₁ + lg ₂ = 3.45 ± ±0.15 for 12 at 25° and =1 for the alkaline solution. *** DIRECT SUPPORT *** A3615139 00007

     

Synthesis and characterization of some methyl complexes of palladium(II). Part 2(1)

Summary Dichloro complexes of Pd^II, [Pd(L–L)Cl₂], where L–L=1-(thiomethyl)-2-(diphenylarsino)ethane (S–As) or 1-(thiomethyl)-2-(diphenylphosphino)ethane (S–P) andtrans-[PdL₂Cl₂], where L=diphenyl(2-phenylethyl)-phosphine (PE), diphenyl(1-naphthyl)phosphine (PN) orN-methyl-2-thiophenealdimine (SN), have been prepared and characterized. The reactions of these complexes with MeLi were investigated. The dimethyl complexes [Pd(L–L)Me₂] (L–L=S–As, S–P) and [Pd(PE)Me₂] were isolated and characterized. Reaction of [Pd(L–L)Me₂] (L–L=S–As, S–P) with HCl affords the monomethyl derivatives [Pd(L–L)Me(Cl)]. In contrast to the Pt analogues, [Pd(L–L)Me₂] and [Pd(L–L)Me(Cl)] are relatively less stable than [Pt(L–L)Me₂] and [Pt(L–L)Me(Cl)].     

Spectrophotometric determination of vanadium with 4-(1′H-1′,2′,4′-Triazolyl-3′-azo)-2-methylresorcinol

Summary 4-(1H-1,2,4-Triazolyl-3-azo)-2-methylresorcinol reacts with vanadium(V) at pH 8.10 (Tris-HClO₄ buffer solution) to produce a pink-violet 11 complex ( _max=525 nm,=2.55×10⁴l·mol^–1· cm^–1) in a 50% (v/v) methanol-water medium, which allows the spectrophotometric determination of 0.1 to 1.51 ppm of vanadium. The method has been applied for the determination of the vanadium content in low alloy steels.

---

Spectrophotometriscbe Bestimmung von Vanadin mit 4-(1H-1,2,4-triazo-lyl-3-azo)-2-methylresorcin

Zusammenfassung Vanadin bildet bei pH 8,10 (Tris-HClO₄-buffer) mit 4-(1H-1,2,4-tri-azolyl-3-azo)-2-methylresorcin ein rosenrot-violettes Chelat, dessen Absorptionsmaximum bei 525 nm in Gegenwart von 50% Methylalkohol gemessen wird. Dieser 11-Komplex entspricht bei einer Vanadin-Konzentration von 0,1–1,51g/ml dem Beerschen Gesetz; seine molare Absorptivität ist 2,55×10⁴l·mol^–1·cm^–1. Das Verfahren wurde zur Bestimmung des Vanadins in Stahl verwendet.

     

Study of Cr(VI)-2-oximinodimedone dithiosemicarbazone reaction and simultaneous determination of Cr(VI) and Fe(III)

Summary 2-Oximinodimedone dithiosemicarbazone reacts with Cr(VI) in strongly acid medium. The orange colour obtained has been used to propose a spectrophotometric method of Cr(VI) determination in the concentration range 0.40–9.5g ml^–1 (=5600 mole^–1-cm^–1 at 485 nm). The stoichiometry of the reaction is 32 (reagentCr(VI)) which is in accordance with the oxidation reaction of the reagent by Cr(VI). The method has been applied to the determination of Cr(VI) and Fe(III) in ceramic materials.

---

Eine Studie zur Cr(VI)-2-oximinodimedondithiosemicarbazon-Reaktion und die simultane Bestimmung von Cr(VI) und Fe(III)

Zusammenfassung 2-Oximinodimedonedithiosemicarbazon reagiert in stark saurem Milieu mit Cr(VI). Die orange Farbe kann im Konzentrationsbereich von 0.4–9,5g/ml zur spektrophotometrischen Cr(VI)-Bestimmung verwendet werden (=5600 1 mol^–1cm^–1bei 485 nm). Die Stöchiometrie der Reaktion ist 32 (Reagens: Cr(VI)) und entspricht der Oxidation des Reagens durch Cr(VI). Die Methode wurde zur Bestimmung von Cr(VI) und Fe(III) in keramischen Materialien eingesetzt.

     

Spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR)

Summary A spectrophotometric method for the determination of palladium is described using 4-(2-pyridylazo)-resorcinol as reagent. The method involves the formation of two red coloured chelates of palladium-PAR at p_H 4.0 and 10.5 respectively. The colour reactions have sensitivity of 0.0085g cm^–2 and 0.0071g cm^–2 for logI ₀/I= 0.001. The effects of p_H, time, order of addition of reagents, temperature etc. have been investigated. The composition of the complexes (metalreagent) have been confirmed by two methods as 11 (at p_H 4.0) and 32 (at p_H 10.5).

---

Zusammenfassung Eine spektrophotometrische Methode zur Palladiumbestimmung mit PAR [4-(2-Pyridylazo)-resorcin] wurde beschrieben. Zwei rotgefärbte Chelate werden bei p_H 4,0 bzw. 10,5 gebildet. Die Empfindlichkeit der beiden Reaktionen beträgt 0,0085 bzw. 0,0071g · cm^–2. Der Einfluß von p_H, Zeit, Reihenfolge der Reagenzien, Temperatur usw. wurde untersucht. Die Zusammensetzung der Komplexe entspricht dem Molverhältnis Pd: Reagens= =11 bei p_H 4,0 bzw. 32 bei p_H 10,5.