有机π共轭配体溶剂化效应与分子间相互作用的理论研究

采用可极化的连续介质模型(PCM), 运用密度泛函理论(DFT), 在B3LYP/6-31+G^**水平下研究了溶剂极性对有机π共轭配体N,N'-Bis-(3-pyridyl)ethylene-bis-urea(BPEBU)中syn-anti构象的分子几何和电子结构的影响, 并借助分子动力学模拟的方法, 采用明确溶剂模型研究了溶质-溶剂分子间的相互作用. 密度泛函理论计算结果表明, 随着溶剂极性的增强, BPEBU中尿素基上的CO键和N-H键以及吡啶环上的C-N键被明显极化, 使羰基氧原子和吡啶氮原子的电负性明显增强, 尿素基的N-H键上氢原子的正电荷也显著增加. 分子动力学模拟统计的结果表明, 在极性较强的乙醇溶液中, 有明确的O…H-O, N…H-O和N-H…O等3种氢键作用存在, 而在丙酮溶液中, 只有N…H-O一种氢键作用存在, 而且与乙醇溶液中的N…H-O作用相比要弱些. 另外, 采用密度泛函理论方法结合连续/明确的混合溶剂模型, 优化得到了溶质-溶剂三聚体的超分子簇结构, 与分子动力学模拟的第一溶剂层中的超分子结构相比, 两者定性一致.     

Solvent effects on electronic structures and chain conformations of alpha-oligothiophenes in polar and apolar solutions

Solvent effects on electronic structures and chain conformations of alpha-oligothiophenes nTs (n = 1 to 10) are investigated in solvents of n-hexane, 1,4-dioxane, carbon tetrachloride, chloroform, and water by using density functional theory (DFT) and molecular dynamics (MD) simulations. Both implicit and explicit solvent models are employed. The polarized continuum model (PCM) calculations and MD simulations demonstrate the weak solvent effects on the electronic structures of alpha-oligothiophenes. The lowest dipole-allowed vertical excitation energies of nTs, obtained from time-dependent DFT/PCM calculations at the B3LYP/6-31G(d) level, exhibit a red shift as the solvent polarity increases, in agreement with experiments. The studied solvents have little impact on the state order of the low-lying excited states provided that the nTs are kept in C2h or C2v symmetry. The MD simulations demonstrate that the chain conformations are distorted to some extent in polar and nonpolar solvents. A qualitative picture of the distribution of solvent molecules around the solvated nTs is drawn by means of radial and spatial distribution functions. The S...H-O and pi...H-O solute-solvent interactions are insignificant in aqueous solution.     

Solvent effects on NMR isotropic shielding constants. a comparison between explicit polarizable discrete and continuum approaches

The gas-to-aqueous solution shifts of the 17O and 13C NMR isotropic shielding constants for the carbonyl chromophore in formaldehyde and acetone are investigated. For the condensed-phase problem, we use the hybrid density functional theory/molecular mechanics approach in combination with a statistical averaging over an appropriate number of solute-solvent configurations extracted from classical molecular dynamics simulations. The PBE0 exchange-correlation functional and the 6-311++G(2d,2p) basis set are used for the calculation of the shielding constants. London atomic orbitals are employed to ensure gauge-origin independent results. The effects of the bulk solvent molecules are found to be crucial in order to calculate accurate solvation shifts of the shielding constants. Very good agreement between the computed and experimental solvation shifts is obtained for the shielding constants of acetone when a polarizable water potential is used. Supermolecular results based on geometry-optimized molecular structures are presented. We also compare the results obtained with the polarizable continuum model to the results obtained using explicit MM molecules to model the bulk solvent effect.     

Calculated and experimental NMR chemical shifts of p-menthane-3,9-diols. A combination of molecular dynamics and quantum mechanics to determine the structure and the solvent effects

NMR chemical shifts have been experimentally measured and theoretically estimated for all the carbon atoms of (1R,3S,4S,8S)-p-menthane-3,9-diol in chloroform solution. Theoretical estimations were performed using a combination of molecular dynamics simulations and quantum mechanical calculations. Molecular dynamics simulations were used to obtain the most populated conformations of the (1R,3S:4S,8S)-p-menthane-3,9-diol as well as the distribution of the solvent molecules around it. Quantum mechanical calculations of NMR chemical shifts were performed on the most relevant conformations employing the GIAO-DFT formalism. A special emphasis was put in evaluating the effects of the surrounding solvent molecules. For this purpose, supermolecule calculations were performed on complexes constituted by the solute and n chloroform molecules, where n ranges from 3 to 16. An excellent agreement with experimental data has been obtained following this computational strategy.     

Solvation of coumarin 153 in supercritical fluoroform

We present a study of local density augmentation around an attractive solute (i.e., giving rise to more attractive interaction with the solvent than solvent-solvent interactions) in supercritical fluoroform. This work is based on molecular dynamics simulations of coumarin 153 in supercritical fluoroform at densities both above and below the critical density, ranging from dilute gas-like to liquid-like, at a reduced temperature (T/T(c)) of 1.03. We focused on studying the structure of the solvation shell and the variation of the solute electronic absorption and emission shifts with density. Quantum calculations at the density functional theory (DFT) level were run on the solute in the ground state, and time-dependent DFT calculations were performed in the solute excited state in order to determine the solute-solvent potential parameters. The results obtained for the Stokes shift are in agreement with the experimental measurements. To evaluate local density augmentation from simulations, we used two different definitions, one based on the solvation number and the other derived from solvatochromic shifts. In the former case, the agreement with experimental results is good, while, in the latter case, better agreement is achieved by perturbatively including the induced-dipole contribution to the solvation energy.     

Simulations of the temperature dependence of amide I vibration

For spectroscopic studies of peptide and protein thermal denaturation it is important to single out the contribution of the solvent to the spectral changes from those originated in the molecular structure. To obtain insights into the origin and size of the temperature solvent effects on the amide I spectra, combined molecular dynamics and density functional simulations were performed with the model N-methylacetamide molecule (NMA). The computations well reproduced frequency and intensity changes previously observed in aqueous NMA solutions. An empirical correction of vacuum frequencies in single NMA molecule based on the electrostatic potential of the water molecules provided superior results to a direct density functional average obtained for a limited number of solute-solvent clusters. The results thus confirm that the all-atom quantum and molecular mechanics approach captures the overall influence of the temperature dependent solvent properties on the amide I spectra and can improve the accuracy and reliability of molecular structural studies.     

The effective fragment potential: small clusters and radial distribution functions

The effective fragment potential (EFP) method for treating solvent effects provides relative energies and structures that are in excellent agreement with the analogous fully quantum [i.e., Hartree-Fock (HF), density functional theory (DFT), and second order perturbation theory (MP2)] results for small water clusters. The ability of the method to predict bulk water properties with a comparable accuracy is assessed by performing EFP molecular dynamics simulations. The resulting radial distribution functions (RDF) suggest that as the underlying quantum method is improved from HF to DFT to MP2, the agreement with the experimental RDF also improves. The MP2-based EFP method yields a RDF that is in excellent agreement with experiment.     

Prediction of the 1H and 13C NMR spectra of alpha-D-glucose in water by DFT methods and MD simulations

We have applied computational protocols based on DFT and molecular dynamics simulations to the prediction of the alkyl 1H and 13C chemical shifts of alpha-d-glucose in water. Computed data have been compared with accurate experimental chemical shifts obtained in our laboratory. 13C chemical shifts do not show a marked solvent effect. In contrast, the results for 1H chemical shifts provided by structures optimized in the gas phase are only fair and point out that it is necessary to take into account both the flexibility of the glucose structure and the strong effect exerted by solvent water thereupon. Thus, molecular dynamics simulations were carried out to model both the internal geometry as well as the influence of solvent molecules on the conformational distribution of the solute. Snapshots from the simulation were used as input to DFT NMR calculations with varying degrees of sophistication. The most important factor that affects the accuracy of computed 1H chemical shifts is the solute geometry; the effect of the solvent on the shielding constants can be reasonably accounted for by self-consistent reaction field models without the need of explicitly including solvent molecules in the NMR property calculation.     

Interplay of intrinsic, environmental, and dynamic effects in tuning the EPR parameters of nitroxides: further insights from an integrated computational approach

The role of stereoelectronic, environmental, and short-time dynamic effects in tuning the hyperfine and gyromagnetic tensors of a prototypical nitroxide spin probe has been investigated by an integrated computational approach based on extended Lagrangian molecular dynamics and discrete-continuum solvent models. Trajectories were generated in two protic solvents as well as in the gas phase for reference; structural analysis of the dynamics, and comparison with optimized solute-solvent clusters, allowed for the identification of the prevailing solute-solvent hydrogen-bonding patterns and helped to define the strategy for the computation of magnetic parameters. This was performed in a separate step, on a large number of frames, by a high-level DFT approach coupling the PBE0 hybrid functional with a tailored basis set and with proper account of specific and bulk solvent effects. Remarkable changes in solvation networks are found on going from aqueous to methanol solution, thus providing a rationalization of indirect experimentally available evidence. The computed magnetic parameters are in satisfactory agreement with the available measured values and allow for an unbiased evaluation of the role of different effects in tuning the overall EPR observables. Apart from their intrinsic interest, our results pave the route toward the development of tunable detection protocols based on specific spectroscopic signatures.     

Study of different association processes in the bicyclo[3.2.1]octan-3-ol series by 13C relaxation time measurements

The measurements of T₁ relaxation times in ¹³C NMR spectroscopy are used to determine solute-solvent interactions. endo- and exo-Bicyclo[3.2.1]octan-3-ol and the corresponding bromohydrins are used as substrates. In a non-polar solvent, such as cyclohexane, solute-solvent interactions occur exclusively, whereas in the more polar acetone only solute-solvent interactions are observed. In chloroform, which is of intermediate polarity, the two types of interactions (solute-solute and solute-solvent) occur simultaneously.     

A hybrid explicit/implicit solvation method for first-principle molecular dynamics simulations

In this work, we present a hybrid explicit/implicit solvation model, well suited for first-principles molecular dynamics simulations of solute-solvent systems. An effective procedure is presented that allows to reliably model a solute with a few explicit solvation shells, ensuring solvent bulk behavior at the boundary with the continuum. Such an approach is integrated with high-level ab initio methods using localized basis functions to perform first-principles or mixed quantum mechanics/molecular mechanics simulations within the extended-Lagrangian formalism. A careful validation of the model along with illustrative applications to solutions of acetone and glycine radical are presented, considering two solvents of different polarity, namely, water and chloroform. Results show that the present model describes dynamical and solvent effects with an accuracy at least comparable to that of conventional approaches based on periodic boundary conditions.     

Thermal and solvent effects on NMR indirect spin-spin coupling constants of a prototypical Chagas disease drug

NMR J-couplings across hydrogen bonds reflect the static and dynamic character of hydrogen bonding. They are affected by thermal and solvent effects and can therefore be used to probe such effects. We have applied density functional theory (DFT) to compute the NMR (n)J(N,H) scalar couplings of a prototypical Chagas disease drug (metronidazole). The calculations were done for the molecule in vacuo, in microsolvated cluster models with one or few water molecules, in snapshots obtained from molecular dynamics simulations with explicit water solvent, and in a polarizable dielectric continuum. Hyperconjugative and electrostatic effects on spin-spin coupling constants were assessed through DFT calculations using natural bond orbital (NBO) analysis and atoms in molecules (AIM) theory. In the calculations with explicit solvent molecules, special attention was given to the nature of the hydrogen bonds formed with the solvent molecules. The results highlight the importance of properly incorporating thermal and solvent effects into NMR calculations in the condensed phase.     

Molecular dynamics simulation study of solvent effects on conformation and dynamics of polyethylene oxide and polypropylene oxide chains in water and in common organic solvents

In this paper, the conformation and dynamics properties of polyethylene oxide (PEO) and polypropylene oxide (PPO) polymer chains at 298 K have been studied in the melt and at infinite dilution condition in water, methanol, chloroform, carbon tetrachloride, and n-heptane using molecular dynamics simulations. The calculated density of PEO melt with chain lengths of n = 2, 3, 4, 5 and, for PPO, n = 7 are in good agreement with the available experimental data. The conformational properties of PEO and PPO show an increasing gauche preference for the O-C-C-O dihedral in the following order water>methanol>chloroform>carbon tetrachloride = n-heptane. On the contrary, the preference for trans conformation has a maximum in carbon tetrachloride and n-heptane followed in the order by chloroform, methanol, and water. The PEO conformational preferences are in qualitative agreement with results of NMR studies. PEO chains formed different types of hydrogen bonds with polar solvent molecules. In particular, the occurrence of bifurcated hydrogen bonding in chloroform was also observed. Radii of gyration of PEO chains of length larger than n = 9 monomers showed a good agreement with light scattering data in water and in methanol. For the shorter chains the observed deviations are probably due to the enhanced hydrophobic effects caused by the terminal methyl groups. For PEO the fitting of end-to-end distance distributions with the semi-flexible chain model at 298 K provided persistence lengths of 0.375 and 0.387 nm in water and methanol, respectively. Finally, the radius of gyration of Pluronic P85 turned out to be 2.25 ± 0.4 nm at 293 K in water in agreement with experimental data.     

Solvent effects and dynamic averaging of 195Pt NMR shielding in cisplatin derivatives

The influences of solvent effects and dynamic averaging on the (195)Pt NMR shielding and chemical shifts of cisplatin and three cisplatin derivatives in aqueous solution were computed using explicit and implicit solvation models. Within the density functional theory framework, these simulations were carried out by combining ab initio molecular dynamics (aiMD) simulations for the phase space sampling with all-electron relativistic NMR shielding tensor calculations using the zeroth-order regular approximation. Structural analyses support the presence of a solvent-assisted "inverse" or "anionic" hydration previously observed in similar square-planar transition-metal complexes. Comparisons with computationally less demanding implicit solvent models show that error cancellation is ubiquitous when dealing with liquid-state NMR simulations. After aiMD averaging, the calculated chemical shifts for the four complexes are in good agreement with experiment, with relative deviations between theory and experiment of about 5% on average (1% of the Pt(II) chemical shift range).     

Coupled cluster calculation of the n --> pi* electronic transition of acetone in aqueous solution

The combined linear response coupled cluster/molecular mechanics (CC/MM) scheme including mutual polarization effects in the coupling Hamiltonian is applied together with supermolecular CC methods to the study of the gas-to-aqueous solution blue shift of the n --> pi* excitation energy in acetone. The aug-cc-pVDZ basis set is found to be adequate for the calculation of this excitation energy. In the condensed phase, the shift in the excitation energy is obtained by statistical averaging over 800 solute-solvent configurations extracted from a molecular dynamics simulation. We find the shift to be around 1100-1200 cm(-1) depending on the specific model used to describe solvent polarization. The importance of including explicit polarization in both the molecular dynamics simulation as well as the CC/MM calculations is emphasized. Furthermore, the significant dependence of the excitation energy on the CO bond length of acetone is discussed.     

Crystallographic and Dynamic Aspects of Solid‐State NMR Calibration Compounds: Towards ab Initio NMR Crystallography

The excellent results of dispersion‐corrected density functional theory (DFT‐D) calculations for static systems have been well established over the past decade. The introduction of dynamics into DFT‐D calculations is a target, especially for the field of molecular NMR crystallography. Four ¹³C ss‐NMR calibration compounds are investigated by single‐crystal X‐ray diffraction, molecular dynamics and DFT‐D calculations. The crystal structure of 3‐methylglutaric acid is reported. The rotator phases of adamantane and hexamethylbenzene at room temperature are successfully reproduced in the molecular dynamics simulations. The calculated ¹³C chemical shifts of these compounds are in excellent agreement with experiment, with a root‐mean‐square deviation of 2.0 ppm. It is confirmed that a combination of classical molecular dynamics and DFT‐D chemical shift calculation improves the accuracy of calculated chemical shifts.     

Calculation of nuclear magnetic resonance shieldings using frozen-density embedding

We have extended the frozen-density embedding (FDE) scheme within density-functional theory [T. A. Wesolowski and A. Warshel, J. Phys. Chem. 97, 8050 (1993)] to include external magnetic fields and applied this extension to the nonrelativistic calculation of nuclear magnetic resonance (NMR) shieldings. This leads to a formulation in which the electron density and the induced current are calculated separately for the individual subsystems. If the current dependence of the exchange-correlation functional and of the nonadditive kinetic-energy functional are neglected, the induced currents in the subsystems are not coupled and each of them can be determined without knowledge of the induced current in the other subsystem. This allows the calculation of the NMR shielding as a sum of contributions of the individual subsystems. As a test application, we have calculated the solvent shifts of the nitrogen shielding of acetonitrile for different solvents using small geometry-optimized clusters consisting of acetonitrile and one solvent molecule. By comparing to the solvent shifts obtained from supermolecular calculations we assess the accuracy of the solvent shifts obtained from FDE calculations. We find a good agreement between supermolecular and FDE calculations for different solvents. In most cases it is possible to neglect the contribution of the induced current in the solvent subsystem to the NMR shielding, but it has to be considered for aromatic solvents. We demonstrate that FDE can describe the effect of induced currents in the environment accurately.