Role of solution chemistry and ion valence on the adhesion kinetics of groundwater and marine bacteria

The role of solution chemistry on bacterial adhesion has been investigated using a radial stagnation point flow (RSPF) system. This experimental system utilized an optical microscope and an image-capturing device to directly observe the deposition kinetics of a groundwater bacterium, Burkholderia cepacia G4g, and a marine bacterium, Halomonas pacifica g. Experiments were carried out under well-controlled hydrodynamic and solution chemistry conditions, allowing for the sensitivity of bacterial adhesion behavior to be examined under a range of ionic strength and valence (KCl vs CaCl2) simulating groundwater and marine environments. Complimentary cell characterization techniques were conducted to evaluate the electrophoretic mobility, hydrophobicity, surface charge density, and viability of the bacteria under the same range of conditions. Solution chemistry was found to have a marked effect on the electrokinetic and surface properties of bacteria and the quartz collector, as well as on the resulting rate of bacterial deposition. Comparable adhesion trends were observed for B. cepacia G4g and H. pacifica g. Specifically, the deposition rates of the two bacteria species in both KCl and CaCl2 solutions increased with ionic strength, a trend consistent with traditional Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, which considers the combination of van der Waals and electrostatic double-layer interaction forces. However, in some cases, experimental results showed bacterial deposition behavior to deviate from DLVO predictions. On the basis of the systematic investigation of bacterial cell characteristics, it was found that Ca2+ ions play a distinct role on bacterial surface charge, hydrophobicity, and deposition behaviors. It is further suggested that bacterial adhesion is determined by the combined influence of DLVO interactions, electrosteric interactions associated with solution chemistry, and the hydrodynamics of the deposition system.     

Highly enantioselective lipase-catalyzed reactions at high temperatures up to 120°C in organic solvent

Lipase-catalyzed kinetic resolutions of 1,1-diphenyl-2-propanol were performed at high temperatures up to 120°C. Burkholderia cepacia lipase immobilized on porous ceramic particles, lipase PS-C II (Amano Enzyme Inc.), gave an enantiopure product at 40–120°C, with the highest conversion (39%) at 80–90°C. The mechanism of high enantioselectivity retained even at 120°C is also described briefly.     

Determination of the van der Waals, electron donor and electron acceptor surface tension components of static Gram-positive microbial biofilms

A large number of studies have shown the influence of the physico-chemical properties of a surface on microbial adhesion phenomenon. In this study, we considered that the presence of a bacterial biofilm may be regarded as a “conditioning film” that may modify the physico-chemical characteristics of the support, and thus the adhesion capability of planktonic micro-organisms coming into contact with this substratum. In this context, we adapted a protocol for biofilm formation that allows, under our experimental conditions, contact angle measurements, the reference method to determine the energetic surface properties of a substratum. This made it possible to determine the van der Waals, electron acceptor and electron donor properties of static biofilms grown at 25°C on stainless-steel slides with six Gram-positive bacteria isolated in dairy plants. A variance analysis indicated significant effects (P<0.05) of the bacterial strains and of the physiological state of the micro-organisms (planktonic or sessile) on the contact angles. To link the energetic properties of the six biofilms with direct adhesion experiments, we measured the affinity of fluorescent carboxylate-modified polystyrene beads for the different biofilm surfaces. The results correlated best with the electron-acceptor components of the biofilm surface energies, stressing the importance of Lewis acid–base interactions in adhesion mechanisms.     

Adhesion characteristics of two Burkholderia cepacia strains examined using colloid probe microscopy and gradient force analysis

Colloid probe atomic force microscopy (CP-AFM) was used to investigate two strains of Burkholderia cepacia in order to determine what molecular scale characteristics of strain Env435 make it less adhesive to surfaces than the parent strain, G4. CP-AFM approach curves analyzed using a gradient force method showed that in a high ionic strength solution (IS=100 mM, Debye length=1 nm), the colloid probe was attracted to the surface of strain G4 at a distance of approximately 30 nm, but it was repelled over a distance of 25 nm when approaching strain Env435. Adhesion forces measured under the same solution conditions during colloid retraction showed that 1.38 nN of force was required to remove the colloid placed in contact with the surface of strain G4, whereas only 0.58 nN was required using strain Env435. At IS=1mM (Debye length=10nm), the attractive force observed with G4 was no longer present, and the repulsive force seen with Env435 was extended to approximately 250 nm. The adhesion of the bacteria to the probe was much less at low IS solution (1 mM) than at high IS (100 mM). The greater adhesion characteristics of strain G4 compared to Env435 were confirmed in column tests. Strain G4 had a collision efficiency of alpha=0.68, while strain Env435 had a much lower collision efficiency of alpha=0.01 (IS=100 mM). These results suggest that the reduced adhesion of strain Env435 measured in column tests is due to the presence of high molecular weight extracellular polymeric substances that extend out from the cell surface, creating long-range steric repulsion between the cell and a surface. Adhesion is reduced as these polymers do not appear to be "sticky" when placed in contact with a surface in AFM tests.     

Enzymatic resolution of (±)-cis-2-aminocyclopentanol and (±)-cis-2-aminocyclohexanol

(±)-cis-N-Benzyloxycarbonyl-2-aminocyclopentanol was efficiently resolved by O-acylation with Pseudomonas cepacia lipase, as was (±)-cis-N-benzyloxycarbonyl-2-aminocyclohexanol when Candida antarctica lipase was used.     

Chemoenzymatic synthesis of both enantiomers of cispentacin

Based on the lipase-catalysed kinetic resolution of the silyloxyalcohol (1RS,2SR)-5 by transesterification with vinyl acetate in the presence of lipase from Pseudomonas cepacia a synthesis of both enantiomers of the β-amino acid cispentacin (1R,2S)-1 and (1S,2R)-1 using simple functional group interconversions is described.     

Shear-flow induced detachment of Saccharomyces cerevisiae from stainless steel: influence of yeast and solid surface properties

The present study focused on the shear-induced detachment of Saccharomyces cerevisiae in adhesive contact with a 316L stainless steel surface using a shear stress flow chamber, with a view to determining the respective influence of the yeast surface properties and the support characteristics. The effect of cultivation of S. cerevisiae yeast cells on their subsequent detachment from the solid surface was particularly investigated. In order to elucidate the role of stainless steel, non-metallic supports were used as control, covering a broad range of surface properties such as surface free energy and roughness: polypropylene (hydrophobic), polystyrene (mildly hydrophobic, similar to stainless steel) and glass (hydrophilic). All materials were very smooth with respect to the size of yeast. First, experiments were carried out on two types of yeast cells, just rehydrated in saline solution, a biological model widely used in the literature. The influence of the ionic strength (1.5 and 150 mM NaCl) on glass and stainless steel was evaluated. Unlike on glass, no clear evidence was found for electrostatic repulsion with stainless steel since high adhesion was observed whatever the ionic strength. A lack of correlation in adhesion results was also obtained when considering the surface physico-chemical characteristics of type I (hydrophilic) and type II (hydrophobic) rehydrated cells and those of both polymers. It was postulated that unavoidable “sticky” compounds were present on the cell wall, which could not be completely removed during the successive washings of the rehydrated cell suspension before use. This could dramatically alter the yeast surface properties and modify the adhesion strength, thus clearly demonstrating the necessity to work with yeast coming from fresh cultures. Biologically active yeast cells were then used. Once cultured, type I- and type II-yeast cells were shown to exhibit the same hydrophilic properties. Regardless of the material used, for the same ionic strength (150 mM NaCl), yeast adhesion was drastically reduced compared to rehydrated yeast cells. Among all the materials tested, the specificity of 316L stainless steel was clearly established. Indeed, for glass and polymers, cell adhesion was substratum-dependent and driven by the balance between the Lifshitz-van der Waals and Lewis acid/base interactions. Despite nearly identical surface free energies for polystyrene and stainless steel, the metallic surface promoted a totally distinct behaviour which was characterized by a strong – although highly variable – yeast adhesion.     

Solid-phase extraction of polar hydrophilic aromatic sulfonates followed by capillary zone electrophoresis-UV absorbance detection and ion-pair liquid chromatography-diode array UV detection and electrospray mass spectrometry

A comprehensive comparison of four different polymeric solid-phase extraction (SPE) materials for the extraction of 22 different aromatic sulfonates of environmental concern was performed. The investigated adsorbents were the polystyrene–divinylbenzene materials LiChrolut EN from Merck, Isolute ENV+ from International Sorbent Technology, HR-P from Macherey–Nagel and the new Oasis HLB poly(divinylbenzene-co-N-vinylpyrrolidone) copolymer from Waters. Different SPE parameters like the elution solvent and the drying step of the cartridges were optimized. Analyses were performed by capillary zone electrophoresis–UV absorbance detection (CZE–UV) and ion-pair liquid chromatography–diode array UV detection coupled in series with electrospray mass spectrometry (IP-LC–DAD-ESI-MS) in the negative ionization mode. LC–MS offers a higher separation efficiency than CZE. The best adsorbents were LiChrolut EN and HR-P followed by Isolute ENV+ and Oasis HLB. The recoveries for most of the onefold negatively charged aromatic sulfonates were >50% for the extraction from spiked ground water at 50 μg/l. Recoveries for LiChrolut EN and HR-P were approximately 20% higher than for Isolute ENV+. Very hydrophilic sulfonates containing more than one negative sulfonate group could not be extracted by any of the tested adsorbents.     

Surface physicochemical properties of Pseudomonas fluorescens and impact on adhesion and transport through porous media

The physiological state of an examined Pseudomonas fluorescens strain had a significant impact on its adhesion to glass surfaces and transport through glass-bead columns. In both batch and column studies collision efficiencies, , for exponential phase cells were much larger (≈2–3) than for stationary or decay phase cells (≈0.5–0.7). Centrifugation of exponential phase cells substantially reduced collision efficiencies (≈0.8). Over the examined range (0.02–0.2 M), ionic strength had no impact on cell attachment. The Lewis acid/base (A/B) character of the cell surface varied with physiological states: exponential phase cells exhibited larger values of the electron–donor parameter of the polar surface tension component, γ_S⁻, than stationary or decay phase cells, resulting in larger calculated cell hydrophilicities. A reduction in exponential phase cell ζ-potential was observed upon centrifugation. Traditional Derjaguin–Landau–Verwey–Overbeek (DLVO) interaction energy profiles (between cells and glass surfaces) indicated energy maxima of the order of 90–130kT, and secondary energy minima of less than 10kT. Extended DLVO modeling predicted infinite energy barriers attributable to repulsive A/B interactions, and similar magnitude secondary energy minima. A pseudo-chemical kinetic approach was used to calculate activation energies of adhesion from experimental collision efficiencies. Collision efficiencies were also predicted from a diffusion-governed mass transport model incorporating interacting force fields. Predicted energy barriers underestimated cell collision efficiencies, suggesting that secondary energy minimum interactions governed initial attachment of cells. The partial reversibility of adhesion upon ionic strength reduction supported the secondary minimum interaction hypothesis.     

Reverse flow injection spectrophotometric determination of iron(III) using norfloxacin

A reversed flow injection colorimetric procedure for determining iron(III) at the μg level was proposed. It is based on the reaction between iron(III) with norfloxacin (NRF) in 0.07 mol l⁻¹ ammonium sulfate solution, resulting in an intense yellow complex with a suitable absorption at 435 nm. Optimum conditions for determining iron(III) were investigated by univariate method. The method involved injection of a 150 μl of 0.04% w/v colorimetric reagent solution into a merged streams of sample and/or standard solution containing iron(III) and 0.07 mol l⁻¹ ammonium sulfate in sulfuric acid (pH 3.5) solution which was then passed through a single bead string reactor. Subsequently the absorbance as peak height was monitored at 435 nm. Beer's law obeyed over the range of 0.2–1.4 μg ml⁻¹ iron(III). The method has been applied to the determination of total iron in water samples digested with HNO₃–H₂O₂ (1:9 v/v). Detection limit (3σ) was 0.01 μg ml⁻¹ the sample through of 86 h⁻¹ and the coefficient of variation of 1.77% (n=12) for 1 μg ml⁻¹ Fe(III) were achieved with the recovery of the spiked Fe(III) of 92.6–99.8%.     

Copolymers of carbon dioxide and nitrogen: an AM1 and ab initio computational study

Extending work by various groups on possible dimers, trimers, etc. of dinitrogen and of carbon dioxide, the authors have studied analogous copolymers of N₂ and CO₂ computationally. Twelve cyclic structures were examined with the AM1, HF/3-21G, HF/6-31G* and MP2(FC)/6-31G* methods, and the acyclic “monomer” to “tetramer” HO(C(O)O–N= N–)_nH, n=1–4, were studied at the AM1 and HF/3-21G levels; the cyclic species included 2-oxa-3,4-diazacyclobut-3-ene-1-one, 2-oxa-3,4,5,6-tetraazacyclohexa-3,5-diene-1-one, and various aza/oxa bicyclo[2.2.0] and bicyclo[2.2.2] systems. For the cyclic species, it was concluded that only the MP2(FC)/6-31G* results, which differ considerably from those at the other three levels, are likely to be reliable. These MP2 calculations indicate that only seven of the 12 cyclic structures studied are stationary points (one is a transition structure), and none of them is kinetically stable at room temperature. Although some have high energy densities (ca. 7–10 kJ g⁻¹), their expected low kinetic stabilities seems to make this of little practical value. The acyclic “copolymers” were all relative minima at the AM1 and HF/3-21G levels; unlike the cyclic species, their kinetic stabilities were not investigated directly by comparing the energies of reactants and decomposition transition states. The energy density of the infinite acyclic polymer was found by extrapolation to be 5.1 (AM1) or 5.6 (3-21G) kJ g⁻¹. The calculated vibrational spectra of the MP2 stationary points and of the acyclic molecules gave some indication of instability by the presence of low-frequency modes leading in the limit to decomposition.     

Regulation of charged groups and laminin patterns for selective neuronal adhesion

Primary neuronal cultures on substrates patterned with extracellular matrix proteins such as laminin have yielded much information regarding the physiological characteristics of neuronal cells in vitro. Surface charge also influences neuronal adherence, and a positive charge can have stimulatory effects. The attraction between laminin patterns and polycation films are of interest in the study of neuronal adhesion. We cultured primary hippocampal neurons on poly(ethylenimine) (PEI) films with laminin grids and evaluated their viability and morphology by means of fluorescent microscopy after 5–7 days. The results showed that the neurons did not form networks on the laminin grids. It is inferred that the PEI films were more favourable for neuronal adhesion than the laminin grid.     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

Chemical and physicochemical characteristics of humic acids extracted from compost, soil and amended soil

In order to gain understanding about how “HA-like substances” from organic amendments may change some properties in the soil solution, the knowledge of chemical and physicochemical characteristics (charge development, acid–base behavior and heterogeneity) should be known.

The aim of this research were (i) to study the elemental and functional composition, (ii) to determine charge behavior, acid–base properties (apparent dissociation constant and buffer capacity) and (iii) to evaluate heterogeneity of humic acids (HA) isolated from municipal solid waste compost (MWC) and from the corresponding MWC-amended soil, in comparison to those of the unamended soil HA using potentiometric titration and differential scanning potentiometry (DSP).

Potentiometric titration and the first derivative of −Q versus pH (negative charge development versus pH) curves could be used to determine proton-affinity distribution and the chemical heterogeneity of the HA as well as the average pK_app and buffer capacity in a wide range of pH.

Differential scanning potentiometry allows determination of the pK_app values in a narrower range of pH than potentiometric titrations and is another simple methodology to study acid–base behavior of HA.

DSP allows us to determine seven different pK_app values for HA-S and HA-E and four different pK_app for HA-C. Each one of these values corresponds to known acidic groups that can be present in the macromolecule of HA.     

Adhesion of nonmotile Pseudomonas aeruginosa on "soft" polyelectrolyte layer in a radial stagnation point flow system: measurements and model predictions

Prediction of bacterial deposition rates onto substrates in natural aquatic systems is quite challenging because of the inherent complexity of such systems. In this study, we compare experimental deposition kinetics of nonmotile bacteria (Pseudomonas aeruginosa) on an alginate-coated substrate in a radial stagnation point flow (RSPF) system to predictions based on DLVO theory. The "softness" of the surface layer of the bacteria and alginate-coated substrate was considered in the calculations of their electrokinetic surface properties, and the relevance of both the classical zeta potential and the outer surface potential as surrogates for surface potential was investigated. Independent of the used electrical potentials, we showed that significant discrepancies exist between theory and experiments. Analysis of microscopic images in the RSPF system has demonstrated, for the first time, that irreversible deposition of particles or cells entrapped in the secondary energy minimum can occur on the alginate layer, despite the hydrodynamic forces resulting from the radial flow in the RSPF system. It is suggested that polymeric structures associated with the surface of the particle/cell and the alginate-coated substrate are responsible for the transition between the secondary minimum and primary energy well. This mode of deposition is likely to be important in the deposition of microorganisms in complex aquatic systems.     

Quantum Size Effects in the Photonics of Semiconductor Nanoparticles

The appearance of quantum size effects in ultradisperse semiconductors, their quantitative analysis, and their effect on the absorption of light and on the photophysical (vibrational relaxation of photogenerated “hot” charge carriers, band-band and “defect” luminescence) and certain primary photochemical processes (the accumulation of excess negative charge by the semiconductor nanoparticles, interphase electron transfer, etc.) are discussed.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 67–87, March–April, 2005.     

Conformational analysis of 1,2-difluoroethane, an ab-initio investigation

Contrary to expectation, the gauche conformer of 1,2-difluoroethane is more stable than the trans conformer in the gas phase. In order to understand the underlying causes of the “gauche effect”, a complete geometry relaxation was performed for the gauche and trans conformers of 1,2-difluoroethane with the 4-21G, 4-31G and 4-31G** basis sets. The 4-31G** optimized geometry of the gauche conformer compares well with the experimental values obtained from a number of electron-diffraction studies. A correction for the correlation energy, calculated by means of second-order Møller—Plesset perturbation theory with the 6-31G** basis set, proves to be essential to obtain a correct estimate of the energy difference between the gauche and trans conformers 1,2-difluoroethane.     

Drainage and critical thickness of foam films from aqueous solutions of mixed nonionic surfactants

The thinning and the critical thickness (of rupture or “black spots” formation) of foam films from aqueous solutions of mixed nonionic surfactants are studied under varied experimental conditions, as a function of film radius (0.05–0.15 mm), surfactant concentration (0.01–1.0 CMC) and ionic strength (0.001–0.1 M NaCl). The experimental values of the drainage coefficient (), determined from the film thickness versus time dependences, were used to calculate the theoretical values of the film critical thickness.

The real velocity of film thinning is a major factor in the process of reaching the state of kinetic instability when approaching the critical thickness (Scheludko's criterion). The classical equation used to describe the film thinning rate, proposed and named by Scheludko (1955) “Reynolds Law”, is applicable for small film radii (r < 0.05 mm). At larger radii the velocity of thinning follows the equation of Manev et al. [E.D. Manev, R. Tsekov, B. Radoev, J. Colloid Interf. Sci. 18 (1997) 769], which takes into account the effect of the film thickness local non-homogeneity.

The studied stabilizing surfactants include n-dodecyl-β-d-maltoside (β-C12G2) and hexaethyleneglycol monododecyl ether (C12E6). Along with confirming the dependences following from the theories of the critical thickness [B. Radoev, A. Scheludko, E.D. Manev, J. Colloid Interf. Sci. 95 (1983) 254] and film thinning [E.D. Manev, R. Tsekov, B. Radoev, J. Colloid Interf. Sci. 18 (1997) 769], the results of the present investigation established also certain deviations for films stabilized with mixed surfactants (β-C12G2 + C12E6). The effectiveness of the empirical equation, employing the drainage coefficient () to describe the film thinning, is emphatically proven here.     

Comparative characteristics of texture and properties of hybrid organic–inorganic adsorbents functionalized by amine and thiol groups

The structure and texture characteristics of the hybrid organic–inorganic adsorbents, which were obtained by using of two-component systems of “structure-forming agent/trifunctional silane”, are compared as follows: the first component is Si(OC₂H₅)₄ or (C₂H₅O)₃Si–A–Si(OC₂H₅)₃, where A = –(CH₂)₂– or –C₆H₄–; the second one is alkoxysilane with amine (–NH₂, NH, –NH(CH₂)₂NH₂) and thiol (–SH) groups. The adsorbents, derived from TEOS, have more accessible functional groups (2.6–4.2 mmol/g) than xerogels, which are based on bis(triethoxysilanes) (1.0–2.6 mmol/g). On another hand xerogels derived from bis(triethoxysilanes) have a more extended porous structure (S_sp =516–968 m²/g, V_s = 0.418–1.490 cm³/g, d = 2.5–15.0 nm) than those that are based on TEOS (S_sp = 4–631 m²/g, V_s = 0.005–1.382 cm³/g, d = 2.3–17.7 nm). The geometric dimensions of functional groups have a more essential effect on the parameters of porous structure in the case of TEOS-derived xerogels. Using solid-state NMR spectroscopy, it has been shown that in synthesis of xerogels with the use of TEOS, the molecular frame of globules is formed by structural units Qⁿ (n = 2,3,4), and the functional groups exist as structural units of Tⁿ (n = 2,3). The xerogels obtained with using bis(triethoxysilanes) consist only of structural units of Tⁿ-type (n = 1,2,3).     

Molecular modelling of some para-substituted aryl methyl telluride and diaryl telluride antioxidants

Quantum mechanical calculations using the 3-21G(d) basis-set were performed on some p-substituted diaryl tellurides and aryl methyl tellurides, and the corresponding cationic radicals of these compounds. Calculated relative radical stabilization energies (RSE:s) were shown to correlate with experimentally determined peak oxidation potentials (R=0.93) and ¹²⁵Te-NMR chemical shifts (R=0.91). A good correlation was also observed between the RSE:s and the Mulliken charge at the tellurium atoms (R=0.97). The results showed that Hartree–Fock calculations using the 3-21G(d) basis set was sufficiently accurate for estimating the impact of p-substituents in aryl tellurides on experimentally determined properties such as peak oxidation potentials and ¹²⁵Te-NMR chemical shifts.