Hydrogen peroxide biosensor based on the immobilization of horseradish peroxidase on ��-Al2O3 nanoparticles/chitosan film-modified electrode

An amperometric biosensor based on horseradish peroxidase (HRP) and ??-Al₂O₃/chitosan composite film at a glassy carbon electrode has been developed. Hydrogen peroxide (H₂O₂) was detected with the aid of ferrocene monocarboxylic acid mediator to transfer electrons between the electrode and HRP. The morphology and composition of the modified electrode were characterized by scanning electron microscopy and electrochemical impedance spectroscopy. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and amperometry. The effects of HRP concentration, the applied potential, and the pH values of the buffer solution on the response of the sensor were investigated for optimum analytical performance. The proposed biosensor showed high sensitivity (0.249?A M^?1?cm^?2) and a fast response (<5?s) to H₂O₂ with the detection limit of 0.07???M. The linear response range of the enzyme electrode to H₂O₂ concentration was from 0.5 to 700???M with a correlation coefficient of 0.9998. The apparent Michaelis-Menten constant of the biosensor was calculated to be 0.818?mM, exhibiting a high enzymatic activity and affinity for H₂O₂.     

Amperometric biosensor for hydrogen peroxide based on coimmobilized horseradish peroxidase and methylene green in ormosils matrix with multiwalled carbon nanotubes

A novel amperometric biosensor for the analytical determination of hydrogen peroxide was developed. The fabrication of the biosensor was based on the coimmobilization of horseradish peroxidase (HRP), methylene green (MG) and multiwalled carbon nanotubes within ormosils; 3-aminopropyltrimethoxysilane (APTMOS), 2-(3,4-epoxycyclohexyl)ethyltrimethoxysilane (ETMOS) and phenyltrimethoxysilane (PHTMOS). APTMOS determined the hydrophilicity/hydrophobicity of the ormosils and PHTMOS and ETMOS increased the physical and mechanical strength of the ormosil matrix. The ormosil modified electrodes were characterized with SEM, UV-vis spectroscopy and electrochemical methods. Cyclic voltammetry and amperometric measurements demonstrated the MG coimmobilized with HRP in this way, displayed good stability and could efficiently shuttle electrons between immobilized enzyme and electrode, and MWCNTs facilitated the electrocatalytic reduction of H₂O₂ at reduced over potential. The Micheaelis constant of the immobilized HRP was 1.8 mM, indicating a high affinity of the HRP to H₂O₂ without loss of enzymatic activity in ormosil matrix. The prepared biosensor had a fast response of H₂O₂, less than 10 s, and excellent linear range of concentration from 5 × 10⁻⁷ to 2 × 10⁻⁵ M with the detection limit of 0.5 μM (S/N = 3) under the optimum conditions. At the same time, the influence of solution pH, effect of enzyme amount, steady-state applied potential and temperature on the biosensor were investigated. The enzyme electrode retained about 90% of its initial activity after 30 days of storage in a dry state at 4 °C. The preparation of the developed biosensor was convenient and showed high sensitivity with good stability.     

An amperometric biosensor based on the coimmobilization of horseradish peroxidase and methylene blue on a β-type zeolite modified electrode

A new biosensor for the amperometric detection of hydrogen peroxide was developed based on the co-immobilization of horseradish peroxidase (HRP) and methylene blue on a β-type zeolite modified glassy carbon electrode without the commonly used bovine serum albumin-glutaraldehyde. The intermolecular interaction between enzyme and zeolite matrix was investigated using FT-IR. The cyclic voltammetry and amperometric measurement demonstrated that methylene blue co-immobilized with HRP in this way displayed good stability and could efficiently transfer electrons between immobilized HRP and the electrode. The sensor responded rapidly to H₂O₂ in the linear range from 2.5 × 10^–6 to 4.0 × 10^–3 M with a detection limit of 0.3 μM. The sensor was stable in continuous operation.     

TNT determination based on its degradation by immobilized HRP with electrochemical sensor

Based on the mechanism of 2,4,6-Trinitrotoluene (TNT) degradation, an amperometric hydrogen peroxide biosensor was constructed for the determination of trace amounts of TNT by immobilization of MWCNTs, HRP and Nafion onto the surface of glassy carbon electrode (GCE). The Nafion/MWCNTs/HRP biosensor was capable of degrading TNT with the consumption of H₂O₂ and HRP in 0.2 mol/L PBS (pH 7.0). Trace TNT was quantitative analyzed by the current decrease of H₂O₂ at the reductive potential of −0.35 V using cyclic voltammetry (CV). Effect of the ratio of MWCNTs/HRP, initial concentration of H₂O₂ and electrolyte’s pH were also optimized by CV. Under the optimal conditions, the current decrease of H₂O₂ that was consumed by TNT degradation was proportional to TNT ranging from 8.8 × 10⁻⁹ mol/L to 2.64 × 10⁻⁷ mol/L with a detection limit of 3.0 × 10⁻⁹ mol/L (S/N = 3). It developed a new way for simple, rapid and sensitive measurement of trace TNT.     

Electrochemistry and scanning electron microscopy of polyaniline/peroxidase-based biosensor

An amperometric biosensor was prepared by in situ deposition of horseradish peroxidase (HRP) enzyme on a polyaniline (PANI)-doped platinum disk electrode. The PANI film was electrochemically deposited on the electrode at 100 mV s⁻¹/Ag-AgCl. Cyclic voltammetric characterization of the PANI film in 1 M HCl showed two distinct redox peaks, which prove that the PANI film was electroactive and exhibited fast reversible electrochemistry. The surface concentration and film thickness of the adsorbed electroactive species was estimated to be 1.85×10⁻⁷ mol cm⁻² and approximately 16 nm, respectively. HRP was electrostatically immobilized onto the surface of the PANI film, and voltammetry was used to monitor the electrocatalytic reduction of hydrogen peroxide under diffusion-controlled conditions. Linear responses over the concentration range 2.5×10⁻⁴ to 5×10⁻³ M were observed. Spectroelectrochemistry was used to monitor the changes in UV-vis properties of HRP, before and after the catalysis of H₂O₂. The biosensor surface morphology was characterized by scanning electron microscopy (SEM) using PANI-doped screen-printed carbon electrodes (SPCEs) in the presence and absence of (i) peroxidase and (ii) peroxide. The SEM images showed clear modifications of the conducting film surface structure when doped with HRP, as well as the effect of hydrogen peroxide on the morphology of biosensor.     

Bilayer lipid membrane biosensor with enhanced stability for amperometric determination of hydrogen peroxide

In this paper, a polydopamine (PDA) film is electropolymerized on the surface of bilayer lipid membrane (BLM) which is immobilized with horseradish peroxidase (HRP). The coverage of the PDA film on HRP/BLM electrode is monitored by electrochemical impedance spectroscopy (EIS). The electrocatalytic reduction of H₂O₂ at the PDA/HRP/BLM electrode is studied by means of cyclic voltammetry (CV). The biosensor has a fast response to H₂O₂ of less than 5 s and an excellent linear relationship is obtained in the concentration range from 2.5 × 10⁻⁷ to 3.1 × 10⁻³ mol L⁻¹, with a detection limit of 1.0 × 10⁻⁷ mol L⁻¹ (S/N = 3). The response current of BLM/HRP/PDA biosensor retains 84% of its original response after being stored in 0.1 mol L⁻¹ pH 7.0 PBS at 4 °C for 3 weeks. The selectivity, repeatability, and storage stability of PDA/HRP/BLM biosensor are greatly enhanced by the coverage of polydopamine film on BLM.     

Immobilization of Hemoglobin on the Gold Colloid Modified Pretreated Glassy Carbon Electrode for Preparing a Novel Hydrogen Peroxide Biosensor

A novel hydrogen peroxide (H₂O₂) biosensor was developed by immobilizing hemoglobin on the gold colloid modified electrochemical pretreated glassy carbon electrode (PGCE) via the bridging of an ethylenediamine monolayer. This biosensor was characterized by UV-vis reflection spectroscopy (UV-vis), electrochemical impendence spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized Hb exhibited excellent electrocatalytic activity for hydrogen peroxide. The Michaelis–Menten constant (K _m) was 3.6 mM. The currents were proportional to the H₂O₂ concentration from 2.6 × 10⁻⁷ to 7.0 × 10⁻³ M, and the detection limit was as low as 1.0 × 10⁻⁷ M (S/N = 3).     

An amperometric biosensor using toluidine blue as an electron transfer mediator intercalated in α-zirconium phosphate-modified horseradish peroxidase immobilization matrix

A novel H₂O₂ biosensor was constructed employing α-zirconium phosphate as a new support substrate to hold an electron shuttle toluidine blue between a glassy carbon electrode and horseradish peroxidase. Toluidine blue was intercalated into α-zirconium phosphate-modified horseradish peroxidase immobilization matrix cross-linked on a glassy carbon electrode surface via bovine serum albumin-glutaraldehyde. This co-immobilization matrix of the mediator and the enzyme was formed from the α-zirconium phosphate (α-ZrP)-toluidine blue (TB) inclusion colloid in which horseradish peroxidase (HRP) was dissolved. Intercalation of TB in layered α-ZrP was investigated by scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and electrochemical measurements. TB immobilized in this way underwent a quasi-reversible electrochemical redox reaction at the electrode. Cyclic voltammetry and amperometric measurements demonstrated good stability and efficiently-shuttled electrons between HRP and the electrode. The sensor responded rapidly to H₂O₂ with a detection limit of 3.0 × 10^–7 mol/L.     

Probing traces of hydrogen peroxide by use of a biosensor based on mediator-free DNA and horseradish peroxidase immobilized on silver nanoparticles

A new electrochemical biosensor for determination of hydrogen peroxide (H₂O₂) has been developed by immobilizing horseradish peroxidase (HRP) on silver colloids (nanosilver) and use of a DNA-functionalized interface. In the presence of the DNA and the nanosilver the immobilized HRP gives a pair of well-defined redox peaks with an electron-transfer rate constant of 3.27 ± 0.91 s⁻¹ in pH 7.0 PBS. The presence of DNA also provides a biocompatible microenvironment for enzyme molecules, greatly amplifies the amount of HRP molecules immobilized on the electrode surface, and improves the sensitivity of the biosensor. Under optimum conditions the biosensor has electrocatalytic activity in the reduction of hydrogen peroxide with linear dependence on H₂O₂ concentration in the range 1.5 × 10⁻⁶ to 2.0 × 10⁻³ mol L⁻¹; the detection limit is 5.0 × 10⁻⁷ mol L⁻¹ at a signal-to-noise ratio of 3. The value of HRP in the composite membrane was found to be 1.62 mmol L⁻¹. These results suggest that the properties of the complex film, with its bioelectrochemical catalytic activity, could make it useful for development of bioelectronic devices and for investigation of protein electrochemistry at functional interfaces.     

A Novel Hydrogen Peroxide Biosensor Based on the Synergistic Effect of Gold‐Platinum Alloy Nanoparticles/Polyaniline Nanotube/Chitosan Nanocomposite Membrane

Based on the immobilization of horseradish peroxidase (HRP) in chitosan(CS) on a glassy carbon electrode (GCE) modified with the Au‐Pt alloy nanoparticles (NPs) / polyaniline nanotube (nanoPAN) nanocomposite film, a novel hydrogen peroxide biosensor was constructed. The modified processes of GCE were monitored by cyclic voltammetry and electrochemical impedance spectroscopy. Au‐PtNPs/nanoPAN/CS had a better synergistic electrochemical effect than did AuNPs/nanoPAN/CS or PtNPs/nanoPAN/CS. The amperometric response of the biosensor towards H₂O₂ was investigated by successively adding aliquots of H₂O₂ to a continuous stirring phosphate buffer solution under the optimized conditions. Because Au‐PtNPs have unique catalytic properties and good biocompatibility, and especially Au‐PtNPs and nanoPAN have synergistic augmentation for facilitating electron‐transfer, the biosensor displayed a fast response time (<2 s) and broad linear response to H₂O₂ in the range from 1.0 to 2200 μmol L^?1 with a relatively low detection limit of 0.5 μmol L^?1 at 3 times the background noise. Moreover, the biosensor can be applied in practical analysis and exhibited high sensitivity, good reproducibility, and long‐term stability.     

Amperometric hydrogen peroxide biosensor based on a glassy carbon electrode modified with polythionine and gold nanoparticles

We report on a novel hydrogen peroxide biosensor that was fabricated by the layer-by-layer deposition method. Thionine was first deposited on a glassy carbon electrode by two-step electropolymerization to form a positively charged surface. The negatively charged gold nanoparticles and positively charged horseradish peroxidase were then immobilized onto the electrode via electrostatic adsorption. The sequential deposition process was characterized using electrochemical impedance spectroscopy by monitoring the impedance change of the electrode surface during the construction process. The electrochemical behaviour of the modified electrode and its response to hydrogen peroxide were studied by cyclic voltammetry. The effects of the experimental variables on the amperometric determination of H₂O₂ such as solution pH and applied potential were investigated for optimum analytical performance. Under the optimized conditions, the biosensor exhibited linear response to H₂O₂ in the concentration ranges from 0.20 to 1.6?mM and 1.6 to 4.0?mM, with a detection limit of 0.067?mM (at an S/N of 3). In addition, the stability and reproducibility of this biosensor was also evaluated and gave satisfactory results.

Electrodeposition of gold nanoparticles on indium/tin oxide electrode for fabrication of a disposable hydrogen peroxide biosensor

A novel disposable third-generation hydrogen peroxide (H₂O₂) biosensor based on horseradish peroxidase (HRP) immobilized on the gold nanoparticles (AuNPs) electrodeposited indium tin oxide (ITO) electrode is investigated. The AuNPs deposited on ITO electrode were characterized by UV-vis, SEM, and electrochemical methods. The AuNPs attached on the ITO electrode surface with quasi-spherical shape and the average size of diameters was about 25 nm with a quite symmetric distribution. The direct electron chemistry of HRP was realized, and the biosensor exhibited excellent performances for the reduction of H₂O₂. The amperometric response to H₂O₂ shows a linear relation in the range from 8.0 μmol L⁻¹ to 3.0 mmol L⁻¹ and a detection limit of 2 μmol L⁻¹ (S/N = 3). The value of HRP immobilized on the electrode surface was found to be 0.4 mmol L⁻¹. The biosensor indicates excellent reproducibility, high selectivity and long-term stability.     

An amperometric biosensor using toluidine blue as an electron transfer mediator intercalated in α-zirconium phosphate-modified horseradish peroxidase immobilization matrix

A novel H₂O₂ biosensor was constructed employing α-zirconium phosphate as a new support substrate to hold an electron shuttle toluidine blue between a glassy carbon electrode and horseradish peroxidase. Toluidine blue was intercalated into α-zirconium phosphate-modified horseradish peroxidase immobilization matrix cross-linked on a glassy carbon electrode surface via bovine serum albumin-glutaraldehyde. This co-immobilization matrix of the mediator and the enzyme was formed from the α-zirconium phosphate (α-ZrP)-toluidine blue (TB) inclusion colloid in which horseradish peroxidase (HRP) was dissolved. Intercalation of TB in layered α-ZrP was investigated by scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and electrochemical measurements. TB immobilized in this way underwent a quasi-reversible electrochemical redox reaction at the electrode. Cyclic voltammetry and amperometric measurements demonstrated good stability and efficiently-shuttled electrons between HRP and the electrode. The sensor responded rapidly to H₂O₂ with a detection limit of 3.0 × 10^–7 mol/L. Received: 1 July 1997 / Revised: 13 October 1997 / Accepted: 21 October 1997     

An ultrasensitive iron(III)-complex based hydrogen peroxide electrochemical sensor based on a nonelectrocatalytic mechanism

In this communication, the first nonelectrocatalysis-type hydrogen peroxide electrochemical sensor is reported. The electroactive iron(III) diethylenetriaminepentaacetic acid (DTPA-Fe^III) complex is immobilized on the cysteamine (cys) modified nanoporous gold (NPG) films by covalent method. The immobilized DTPA-Fe^III complex quickly communicates an electron with the electrode. Upon addition of hydrogen peroxide, however, hydrogen peroxide inhibits the direct electron transfer of the DTPA-Fe^III complex due to the generation of nonelectroactive DTPA-Fe^III–H₂O₂ complex. Based on quenching mechanism, the first hydrogen peroxide electrochemical sensor based on a nonelectrocatalytic mechanism is developed. The novel hydrogen peroxide electrochemical sensor has the ultralow detection limit (1.0 × 10^–14 M) and wide linear range (1.0 × 10^–13 to 1.0 × 10^–8 M) with excellent reproducibility and stability.     

Electrochemical sensing platform based on covalent immobilization of thionine onto gold electrode surface via diazotization-coupling reaction

A novel electrochemical sensing platform by modification of electroactive thionine (Th) onto gold electrode surface was constructed, which was realized by diazotization of 4-aminothiophenol (ATP) self-assembled monolayer, followed by coupling of Th with the diazonium group to form a covalent diazo bond. A pair of well-defined redox peaks of Th was observed in the cyclic voltammetric measurement. The resulting diazo-ATP monolayer displayed superior electrical conductivity, which contributed to the sensitive detection of hydrogen peroxide (H₂O₂). The immobilized Th also showed a remarkable stability, which may benefit from the π-π stacking force and the covalent diazo bond between diazo-ATP and Th molecules. Under the optimized experimental conditions, the current fabricated non-enzyme and reagentless sensor could show a rapid response to H₂O₂ within 3 s and a linear calibration plot ranged from 1.0 × 10⁻⁶ to 6.38 × 10⁻³ M with a detection limit of 6.7 × 10⁻⁷ M. The current fabrication strategy of electroactive interface is expected to be used as a versatile route for the immobilization of more electroactive molecules and offer more opportunities for the applications in electrochemical sensor, biosensor, electrocatalysis, etc.     

Thick-film electrodes for measurement of superoxide and hydrogen peroxide based on direct protein–electrode contacts

Cytochrome c was immobilized on screen-printed thick-film gold electrodes by a self-assembly approach using mixed monolayers of mercaptoundecanoic acid and mercaptoundecanol. Cyclic voltammetry revealed quasi-reversible electrochemical behavior of the covalently fixed protein with a formal potential of +10 mV vs. Ag/AgCl. Polarized at +150 mV vs. Ag/AgCl the electrode was found to be sensitive to superoxide radicals in the range 300–1200 nmol L^–1. Compared with metal needle electrodes sensitivity and reproducibility could be improved and combined with the easiness of preparation. This allows the fabrication of disposable sensors for nanomolar superoxide concentrations. By changing the electrode potential the sensor can be switched from response to superoxide radicals to hydrogen peroxide—another reactive oxygen species. H₂O₂ sensitivity can be provided in the range 10–1000 mol L^–1 which makes the electrode suitable for oxidative stress studies.     

A hydrogen peroxide biosensor based on multiwalled carbon nanotubes-polyvinyl butyral film modified electrode

A novel approach to construct a amperometric biosensor for determination of H₂O₂ is described. Horseradish peroxidase (HRP) as a base enzyme was immobilized into the mixture of multiwalled carbon nanotubes (MWNTs) and polyvinyl butyral (PVB). Taking the classical hydroquinone as mediator, cyclic voltammetry and amperometric measurements were used to study and optimize the performance of the resulting H₂O₂ biosensor. The effect of the concentration of MWNTs, HRP, hydroquinone, solution pH, and the working potential of amperometry on the electrochemical biosensor was systematically studied. The results showed that the fabricated biosensor demonstrated significant electrocatalytic activity for the reduction of hydrogen peroxide with wide linear range from 0.000832 to 0.6 mM, and low detection limit 0.000167 mM (S/N = 3) with fast response time less than 8 s. The apparent Michaelis–Menten constant was determined to be 0.049 mM. Additionally, the biosensor exhibited high sensitivity, rapid response and good long-term stability.     

Development of hydrogen peroxide biosensor based on in situ covalent immobilization of horseradish peroxidase by one-pot polysaccharide-incorporated sol-gel process

A simple and reliable one-pot approach was established for the development of a novel hydrogen peroxide (H₂O₂) biosensor based on in situ covalent immobilization of horseradish peroxidase (HRP) into biocompatible material through polysaccharide-incorporated sol-gel process. Siloxane with epoxide ring and trimethoxy anchor groups was applied as the bifunctional cross-linker and the inorganic resource for organic-inorganic hybridization. The reactivity between amine groups and epoxy groups allowed the covalent incorporation of HRP and the functional biopolymer, chitosan (CS) into the inorganic polysiloxane network. Some experimental variables, such as mass ratio of siloxane to CS, pH of measuring solution and applied potential for detection were optimized. HRP covalently immobilized in the hybrid matrix possessed high electrocatalytic activity to H₂O₂ and provided a fast amperometric response. The linear response of the as-prepared biosensor for the determination of H₂O₂ ranged from 2.0 × 10⁻⁷ to 4.6 × 10⁻⁵ mol l⁻¹ with a detection limit of 8.1 × 10⁻⁸ mol l⁻¹. The apparent Michaelis-Menten constant was determined to be 45.18 μmol l⁻¹. Performance of the biosensor was also evaluated with respect to possible interferences. The fabricated biosensor exhibited high reproducibility and storage stability. The ease of the one-pot covalent immobilization and the biocompatible hybrid matrix serve as a versatile platform for enzyme immobilization and biosensor fabricating.     

A Novel Amperometric Biosensor for Determination of Hydrogen Peroxide Based on Nafion and Polythionine as Well as Gold Nanoparticles and Gelatin as Matrixes

Abstract

A new biosensor for the amperometric detection of hydrogen peroxide was developed by means of immobilized horseradish peroxidase (HRP) on a platinum disk based on gold nanoparticles, nafion, polythionine (PTn), and gelatin as matrixes. The mediator (PTn) was embedded in nafion film effectively without leaching even after long periods of operation, the immobilization of the enzyme comes from the cooperative binding by the Au nanoparticles and gelatin. The fabrication procedure of the biosensor was characterized by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrochemical characteristics of the enzyme electrode with respect to the effect of pH, temperature, and the operational and storage stabilities were studied. The test demonstrated that the biosensors show high stability, fast response (<20 s), and a working range 0.05 to 30.6 mM (correlation coefficient: 0.9986), a detection limit of 0.02 mM to hydrogen peroxide (H₂O₂). The analytical results by this approach were in satisfactory agreement with those by conventional methods of titration.     

Amperometric biosensor with HRP immobilized on a sandwiched nano-Au / polymerized m-phenylenediamine film and ferrocene mediator

An amperometric biosensor has been developed for the determination of H₂O₂ in plant samples. Horseradish peroxidase (HRP) is immobilized on a sandwiched nano-Au particle / m-phenylenediamine polymer film by glutaraldehyde cross-linking. The film is formulated on the carbon paste electrode (CPE) blended with ferrocene as an electron transfer mediator. On the low concentration range, the current response is related to the H₂O₂ concentration linearly from 0 to 8×10^-6 M with a detection limit of 1.3×10^-7 M. On a wider concentration range of 8×10^-6 to 1.4×10^-4 M, the reciprocal of current response is linearly related to the reciprocal of H₂O₂ concentration. The apparent Michaelis-Menten constant (K_m^app) was calculated to be 0.0334 mM. The sensor has been tested by determining H₂O₂ concentration in plant leaf samples.