Advanced polymers for electrooptics

Polymers have been in use for a long time as passive materials for components in electronics and electrooptics. They combine the possibility of easy processing with an infinite potential of functionalization. They can be conductors or semiconductors, ferroelectrics and can exhibit interesting properties such as photoconductivity, piezo, pyroelectricity or nonlinear optical properties. As a consequence they are now used for merging active components in the field of electrooptics such as displays, sensors or modulators for optical signal treatment. This paper describes the properties and applications of some recent polymers in the field of electroptics. In the first part of this paper the properties of amorphous copolymers with a pending group with large hyperpolarizability are described. These amorphous copolymers show high optical nonlinear coefficients after poling under an electric field. We have used these copolymers for the manufacture of an electrooptic modulator working at 1.3 μm at a frequency of 1 GHz. The second part deals with ferroelectric polymers and their pyroelectric properties. The realization and performance of an IR pyroelectric sensor using copolymers of polyvinylidene fluoride–ethylene trifluride are described. Some new results concerning polymersdispersed liquid crystals are also described.     

Specific features of liquid-crystalline comb-like polymers with mesogenic groups

The results of structural investigation of the new type of the liquid-crystalline thermotropic methacrylic polymers are discussed. These polymers contain mesogenic groups as models for cholesteric, nematic and smectic types of low-molecular liquid crystals. The groups are attached to the backbone through methylene bridges of various lengths. The polymers of the first group have amorphous structure; the polymers of the second group are characterized by liquid crystalline structure and those of the third group can exist in both crystalline and liquid-crystalline states, manifesting properties of enantiotropic liquid crystals. The temperatures and heats of phase transitions have been determined. It is shown that the ability to realize the liquid-crystalline state of comb-like polymers with mesogenic groups depends on and is determined by the proceess of ordering of these groups.     

Fluorescent ferroelectric liquid crystalline copolyacrylates

Fluorescent liquid crystalline side chain polymers were synthesized by copolymerization of a ferroelectric monomer and 5 per cent of various blue fluorescent naphthalic imide dye comonomers. Those copolymers were characterized by DSC, X-ray, GPC and optical microscopy. In favourable cases, fast switching fluorescent ferroelectric polymers resulted, exhibiting high tilt angles (up to ∼ 34°) and spontaneous polarization values (up to ∼ 115 nC cm^-2) in the S*_c phase. One fluorescent copolymer shows orthogonal smectic phases exclusively due to the structure of the incorporated fluorescent comonomer. In this case a strong electroclinic effect and high induced tilt angles (12° 10 V μm^-1) have been observed in the S_a phase. Order parameters, S, of the dye moieties up to 0.64 were measured in the room temperature S_b phase for the copolymers     

Intramolecular liquid-crystal order in polymers with chain side groups

Hydrodynamic, optical and electro-optical properties of solutions of polyphenyl methacrylic esters of cetyl and nonyl oxybenzoic acids and of random copolymers of the C₁₆ ester with cetyl methacrylate have been investigated.Experimental data show that the molecules of these polymers exhibit intramolecular orientationalpolar order of a mesomorphic type in which the side-chains form a mobile liquid-crystalline structure. The intramolecular mesomorphic state is due to the side chain radical containing groups capable of forming thermotropic nematic liquid crystals.     

Synthesis and characterization of side-chain liquid-crystalline poly(ethyleneimine)s with cyanobiphenyl groups

A series of polyethyleneimine-based side-chain liquid-crystalline polymers substituted with different ratios of cyanobiphenyl as pendent mesogenic groups has been synthesized in which the spacer length varies between two and six methylene units. The structures of the synthesized polymers are confirmed by infrared and ¹H nuclear magnetic resonance spectroscopy. The thermal properties of these polymers have been investigated using differential scanning calorimetry, polarized optical microscopy and X-ray diffraction. The results indicate that the thermal behaviour of the polymers is strongly dependent on the degree of substitution. Polymers containing more than 69% of mesogenic groups exhibit nematic-type thermotropic liquid-crystalline behaviour with schlieren textures. Below this limit, the polymers are amorphous. Polymers with a higher degree of substitution present the crystalline states. The phase transition temperatures increase and the mesomorphic temperature ranges widen with increasing degree of substitution. The clearing temperatures decrease as the spacer length increases. An odd-even effect in the clearing temperatures is observed and the odd members display the higher values.     

Opto-electronic polymers for advanced computer and communication technologies

This paper describes reviews about the characterization of optical and electronic (opto-electronic) organic materials including polymers, and their applications for advanced key devices used for computers and communications technologies. On the basis of the author's recent investigations, discussions are made on organic electroluminescent thin film materials for emissive display devices, polymer-dispersed liquid crystal materials for passive display devices, organic photo-conductive materials for electrophotographic printer devices, and highly electroconductive polymers for solid tantalum capacitors. Finally, technical issues and development prospects for the opto-electronic organic materials in the 21st century are suggested.     

Rheological behavior of comb-shaped mesophase polymers and their modifying role in the blends with thermoplastics

Most of the polymers with mesogenic groups in side- or main-chains are liquid-crystalline in nature. One can observe a lot of similarities in the mesophase structure types, orientational order parameter, anisotropy of optical, electrical and magnetical properties of polymer and low-molecular-weight liquid crystals. At the same time the presence of backbones contributes some peculiarities and limitations to their behavior.     

A coloured ferroelectric side chain polymer

Coloured ferroelectric liquid-crystalline side chain copolymers containing 5 per cent and 15 per cent of an azo dye were synthesized and characterized by DSC, GPC and optical microscopy. Order parameters, S, of the azo compound exceeding 0·8 were measured in the frozen smectic phase for the 5 per cent copolymer. The copolymers exhibit fast electrooptic switching in the range of a few hundred microseconds to milliseconds in the S_c* phase. Both linear (i.e. electroclinic-like) and ferroelectric switching have been observed. Tilt angles of ∼19° and spontaneous polarization of ∼300nC cm^-2 have been recorded in the S_c* phase.     

Fast switching ferroelectric liquid-crystalline polymers

The principles of ferroelectricity, especially in liquid crystals (FLC) and polymers, are briefly presented. In a liquid-crystalline side chain polyacrylate electro-optical switching with response times of 200–400 μs was measured. Besides the ferroelectric switching an even shorter electroclinic switching process was detected. The influence of the spacer length and the molecular weight on the ferroelectric properties is discussed. The kind and number of chiral centers and their location in the side group strongly affects the electrooptical properties. In one polymer a change of the optical contrast caused by a sign reversal of the spontaneous polarization was found. In another FLC polymer three switching states (antiferroelectric behaviour) were detected. With coloured and fluorescent FLC polymers, obtained by mixing or by copolymerization new promising applications in electrooptical devices are expected.     

Laser addressed thermo-optic effect in a novel dyed liquid-crystalline polysiloxane

Initial experimental evaluation of a novel liquid-crystalline polysiloxane for thermo-optical recording is presented. A versatile system using a single laser source has been used to gather information on the dynamics of laser addressing. To ensure the most stable, highest-contrast pixel the polymer must be heated through its biphasic region and some way into the isotropic phase. It was found that at 60°C using laser pulses of 300μs or less, write-in and selective erasure times were on the submillisecond timescale, and that bulk erasure required 1-2 min. The use of the polymer in an analogue optical store has been demonstrated and an unoptimized sensitivity of 12nJ/μm² for 632°8 nm light was found at 24°C.     

Synthesis and properties of new chiral dopants containing a δ-lactone ring for practical ferroelectric liquid crystal mixtures

A series of new optically active δ-lactones were synthesized as chiral dopants for ferroelectric liquid crystals (FLCs). The response time of an FLC mixture containing 4 mol% (S)-2,2-dimethyl-5-[2-fluoro-4-(5-n-octylpyrimidin-2-yl)-phenoxy[methyl-δ-valerolactone was 25 μs at 25°C. (0-90 per cent change in light transmission, 10 V μm^-1). The synthesis and properties of these materials as practical chiral dopants are reported.     

Molecular dynamics in liquid-crystalline side chain polymers studied by dielectric relaxation spectroscopy: A comparative study

A series of liquid-crystalline side chain copolymers with different main chains have been studied by the dielectric method in a maximum frequency range of 9 decades. Oriented samples were used throughout. The data were analysed in terms of the Havriliak-Negami and Fuoss-Kirkwood formulae for the relaxation functions. Two well separated dispersion regions with their strengths depending strongly on the macroscopic orientation were found. The low frequency or δ-relaxation shows a marked change in its curve form and width with different main chain structure, its strength being determined by the longitudinal dipole moment of the mesogenic unit. The high frequency relaxation shows a more complicated dependence of its characteristic parameters on the molecular structure. In some cases a decomposition into two underlying relaxations was successfully attempted. We discuss the models for molecular motions developed for low molecular weight liquid crystals and for amorphous polymers, in order to explain the behaviour of the different dispersions found.     

The second and third order non-linear optical properties of liquid crystalline polymers

The second and third order non-linear optical susceptibilities of several donoracceptor substituted side chain polymers, some of which exhibit mesophases, will be reported. The susceptibilities were measured by harmonic generation from thin films, typically 0·5 μm thick, at a fundamental wavelength of 1064 nm and 1579 nm. For second harmonic generation, the spin coated films were contact poled on a glass substrate with an interdigited electrode pattern. Typical values obtained were χ⁽²⁾₃₁ = 1 × 10^-9 esu and χ⁽²⁾₃₃ = 3 × 10^-9 esu, the largest value was χ⁽²⁾₃₃ = 6·3 × 10^-9 esu. The difficulty in deriving reliable second order structure-property relations because of the large effect which the contact poling process has on the non-linear optical susceptibility of the films will be highlighted. The highest χ⁽³⁾ value of 5·8 × 10^-12 esu obtained from an amorphous film of a polymer with an asymmetrically substituted azo side group is comparable with the susceptibility of more typical third order non-linear materials such as the main chain polymers polyphenylacetylene and poly-p-phenylenebenzobisthiazole.     

Liquid crystalline polymers: From self-organization to functions and applications

Liquid crystals derive their unusual properties and their broad range of applications from their unique spatial and orientational order giving rise to specific symmetries, to strong anisotropies with respect to macroscopical properties and to a strong coupling to external fields. We have studied for liquid crystalline polymers modes of inducing strong modifications of the anisotropic optical properties locally in solid films by light. A storage process is described in this contribution which is based on light-induced trans-cis-trans-isomerization reactions of azobenzene chromophores attached to a polymer backbone as side groups in liquid crystalline polymers. The chromophores are able to rotate in the glassy state if subjected to linearly polarized light: the azobenzene units approach a saturation orientation which is perpendicular to the polarization direction of the light. The contribution discusses the molecular mechanism of this process as well as possible applications.     

Liquid-crystal nanoscience: an emerging avenue of soft self-assembly

Liquid crystals are finding increasing applications in a wide variety of fields including liquid-crystal display technology, materials science, bioscience, etc., apart from acting as prototype self-organizable supramolecular soft materials and tunable solvents. Recently, keeping in pace with topical science, liquid crystals have entered into the fascinating domains of nanoscience and nanotechnology. This tutorial review describes the recent and significant developments in liquid-crystal nanoscience embracing contemporary nanomaterials such as nanoparticles, nanorods, nanotubes, nanoplatelets, etc. The dispersion of zero-, one- and two-dimensional nanomaterials in liquid crystals for the enhancement of properties, liquid-crystalline phase behavior of nanomaterials themselves, self-assembly and alignment of nanomaterials in liquid-crystalline media, and the synthesis of nanomaterials by using liquid crystals as 'templates' or 'precursors' have been highlighted and discussed. It is almost certain that the 'fourth state of matter' will play more prevalent roles in nanoscience and nanotechnology in the near future. Moreover, liquid-crystal nanoscience reflects itself as a beautiful demonstration of the contemporary theme "crossing the borders: science without boundaries".     

Synthesis, characterization and coating applications of liquid crystalline acrylic copolymers

The synthesis and characterization of the coating properties of liquid crystalline acrylic copolymers containing p -hydroxybenzoic acid as mesogenic group are described. The synthetic method involves the grafting of p-hydroxybenzoic acid onto acrylic copolymers, confirmed by characterization with IR and ¹H NMR techniques. The presence of liquid crystal was assessed by observing optical textures under the polarizing microscope and by DSC and TGA. The coating properties such as flexibility, hardness, adhesion, drying time, viscosity, etc. of acrylic copolymers as well as of liquid crystalline acrylic copolymers were studied. The results showed that LC polymers have potential for coating applications.     

Synthesis and thermal behaviours of side-chain liquid-crystalline poly[N-(4-methoxyazobenzene-4′-oxyalkyl)ethyleneimine]

A series of side-chain liquid-crystalline polymers, poly[N-(4-methoxyazobenzene- 4′-oxyalkyl)ethyleneimine](PEnZO), has been synthesised in which the number of methylene units in spacers varies from two to six. The structures of the synthesised monomers and polymers were confirmed by infrared (IR) and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. The thermal properties of these polymers have been investigated using differential scanning calorimetry (DSC), polarising optical macroscopic (POM) X-ray diffraction and thermogravimetric analysis (TGA). The test results indicated that the obtained polymers exhibited thermotropic liquid-crystalline mesomorphism of nematic type with schlieren textures. It was observed that the thermal behaviours of the polymers were strongly dependent on the degree of substitution and the length of spacers. Polymers containing less than 57% of mesogenic groups did not exhibit mesogenic phase and resembled amorphous polymer. A more pronounced odd–even effect in the melting points and their enthalpy changes was observed on increasing the spacer length in which the odd members displayed lower values, which were also slightly dependent on the substitution degree of polymers. The mesomorphic temperature ranges of odd members were wider than those of even members. The decomposition temperatures of copolymers were near 230°C.     

Liquid-crystalline phases of circular superhelical plasmid DNA and their modification by the action of nuclease enzymes

CD spectra of liquid-crystalline dispersions, X-ray diffraction patterns and optical textures of liquid crystals prepared from native superhelical DNA in poly(ethyleneglycol)-containing water-salt solutions before and after treatment of DNA with micrococcal nuclease have been obtained. It was found that condensation of native superhelical DNA is accompanied by the formation of liquid crystals with a non-specific optical texture. After treatment of the DNA, liquid-crystalline dispersions, with Micrococcal nuclease the DNA is able to form two similar types of liquid crystals with abnormal optical activity which differ in the peculiarities of their textures. The data obtained demonstrate the formation of multiple types of liquid crystals from high molar mass double-stranded optically active DNA molecules.     

Synthesis,characterization and coating applications of liquid crystalline acrylic copolymers

The synthesis and characterization of the coating properties of liquid crystalline acrylic copolymers containing p -hydroxybenzoic acid as mesogenic group are described. The synthetic method involves the grafting of p-hydroxybenzoic acid onto acrylic copolymers, confirmed by characterization with IR and ¹H NMR techniques. The presence of liquid crystal was assessed by observing optical textures under the polarizing microscope and by DSC and TGA. The coating properties such as flexibility, hardness, adhesion, drying time, viscosity, etc. of acrylic copolymers as well as of liquid crystalline acrylic copolymers were studied. The results showed that LC polymers have potential for coating applications.     

One- and two-dimensional order in multilayered structures of liquid-crystalline polymers

The parameters of the multilayered ordering in liquid-crystalline polymers have been analysed in the terms of longitudinal and transversal correlation lengths. The perfection of one- and two-dimensional order in the multilayered structures of smectic comb-like liquid-crystalline polymers, low-molecular-weight liquid crystals and Langmuir films has been compared.