Enhanced permanganate chemiluminescence

The significant enhancement of acidic potassium permanganate chemiluminescence by Mn(II) results from the concomitant presence of permanganate and Mn(III) in the reagent solution, which enables rapid production of the excited Mn(II) emitter with a wide range of analytes. Furthermore, the key Mn(III) co-reactant can be quickly generated by reducing permanganate with sodium thiosulfate, instead of the slow (~24 h) equilibration required when Mn(ii) is used. The emission from reactions with analytes such as tyrosine and fenoterol was over two orders of magnitude more intense than with the traditional permanganate reagent.     

Soluble manganese(IV) as a chemiluminescence reagent for the determination of opiate alkaloids, indoles and analytes of forensic interest

We present the results of our investigations into the use of soluble manganese(IV) as a chemiluminescence reagent, which include a significantly faster method of preparation and a study on the effect of formaldehyde and orthophosphoric acid concentration on signal intensity. Chemiluminescence detection was applied to the determination of 16 analytes, including opiate alkaloids, indoles and analytes of forensic interest, using flow injection analysis methodology. The soluble manganese(IV) reagent was less selective than either acidic potassium permanganate or tris(2,2′-bipyridyl)ruthenium(III) and therefore provided a more universal chemiluminescence detection system for HPLC. A broad spectral distribution with a maximum at 730 ± 5 nm was observed for the reaction between the soluble manganese(IV) and a range of analytes, as well as the background emission from the reaction with the formaldehyde enhancer. This spectral distribution matches that reported for chemiluminescence reactions with acidic potassium permanganate, where a manganese(II) emitting species was elucidated. This provides further evidence that the emission evoked in reactions with soluble manganese(IV) also emanates from a manganese(II) species, and not bimolecular singlet oxygen as suggested by previous authors.     

Chemiluminescence detection flow cells for flow injection analysis and high-performance liquid chromatography

We have examined a range of new and previously described flow cells for chemiluminescence detection. The reactions of acidic potassium permanganate with morphine and amoxicillin were used as model systems representing the many fast chemiluminescence reactions between oxidising agents and organic analytes, and the preliminary partial reduction of the reagent was exploited to further increase the rates of reaction. The comparison was then extended to high-performance liquid chromatography separations of α- and β-adrenergic agonists, with permanganate chemiluminescence detection. Flow cells constructed by machining novel channel designs into white polymer materials (sealed with transparent films or plates) have enabled improvements in mixing efficiency and overall transmission of light to the photodetector.     

The characteristic red chemiluminescence from reactions with acidic potassium permanganate: further spectroscopic evidence for a manganese(II) emitter

A direct comparison of the laser-induced photoluminescence of manganese(ii) with the chemiluminescence from the reaction between acidic potassium permanganate and sodium borohydride was used to confirm that the characteristic red emission from this widely used chemiluminescence reagent emanates from an electronically excited manganese(ii) species.     

A screening test for heroin based on sequential injection analysis with dual-reagent chemiluminescence detection

A sequential injection analysis procedure with dual-reagent chemiluminescence detection was applied to the screening of street drug seizure samples for the presence of heroin. The chemiluminescence reagents (acidic potassium permanganate and tris(2,2'-bipyridine)ruthenium(III)) were aspirated from either side of a sample aliquot that was sufficiently large to prevent interdispersion of the reagent zones, and therefore two different chemical reactions could be performed simultaneously at either end of the sample zone. The presence of heroin in seizure samples was indicated by a strong response with the tris(2,2'-bipyridine)ruthenium(III) reagent and confirmed by a significant increase in the response with the permanganate reagent when the sample was treated with sodium hydroxide to hydrolyse the heroin to morphine. Nicomorphine (a morphine-derived pharmaceutical) was synthesised and tested under the same conditions. The responses with the permanganate reagent were similar to those for heroin, which supports the proposed chemical basis for the test. However, the responses with tris(2,2'-bipyridine)ruthenium(III) were far lower for nicomorphine than heroin (approximately 5-fold for the samples that had not been hydrolysed).     

Effect of oxidant type on the chemiluminescence intensity from the reaction of tris(2,2′-bipyridyl)ruthenium(III) with various organic acids

An investigation into the chemiluminescence of fourteen organic acids and tris(2,2′-bipyridyl)ruthenium(II) was undertaken. Particular emphasis was placed upon the method of production of the reagent, tris(2,2′-bipyridyl)ruthenium(III), with cerium(IV) sulfate, potassium permanganate, lead dioxide and electrochemical generation. Analytically useful chemiluminescence was observed when Ce(IV) or potassium permanganate were employed as oxidants. The kinetics of analyte oxidation was related to the intensity of the chemiluminescence emission, which increased by three orders of magnitude for tartaric acid after 40 h of oxidation.     

Chemically induced phosphorescence from manganese(II) during the oxidation of various compounds by manganese(III), (IV) and (VII) in acidic aqueous solutions

Chemiluminescence was observed during the manganese(III), (IV) and (VII) oxidations of sodium tetrahydroborate, sodium dithionite, sodium sulfite and hydrazine sulfate in acidic aqueous solution. From the corrected chemiluminescence spectra, the wavelengths of maximum emission were 689±5 and 734±5 nm when the reactions were performed in sodium hexametaphosphate and sodium dihydrogenorthophosphate/orthophosphoric acid environments, respectively. The corrected phosphorescence spectrum of manganese(II) sulfate in a solution of sodium hexametaphosphate at 77 K exhibited two peaks with maxima at 688 and 730 nm. The chemical and spectroscopic evidence presented strongly supported the postulation that the emission was an example of solution-phase chemically induced phosphorescence of manganese(II) thereby, confirming earlier predictions that the chemiluminescence from acidic potassium permanganate reactions originated from an excited manganese(II) species.     

Screening for antioxidants in complex matrices using high performance liquid chromatography with acidic potassium permanganate chemiluminescence detection

The use of high performance liquid chromatography with acidic potassium permanganate chemiluminescence detection to screen for antioxidants in complex plant-derived samples was evaluated in comparison with two conventional post-column radical scavenging assays (2,2-diphenyl-1-picrylhydrazyl radical (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) radical cation (ABTS(+))). In this approach, acidic potassium permanganate can react with readily oxidisable compounds (potential antioxidants), post-column, to produce chemiluminescence. Using flow injection analysis, experimental parameters that afforded the most suitable permanganate chemiluminescence signal for a range of known antioxidants were studied in a univariate approach. Optimum conditions were found to be: 1×10(-3)M potassium permanganate solution containing 1% (w/v) sodium polyphosphates adjusted to pH 2 with sulphuric acid, delivered at a flow rate of 2.5 mL min(-1) per line. Further investigations showed some differences in detection selectivity between HPLC with the optimised post-column permanganate chemiluminescence detection and DPPH and ABTS(+) assays towards antioxidant standards. However, permanganate chemiluminescence detection was more sensitive. Moreover, screening for antioxidants in green tea, cranberry juice and thyme using potassium permanganate chemiluminescence offers several advantages over the traditional DPPH and ABTS(+) assays, such as faster reagent preparation and superior stability; simpler post-column reaction manifold; and greater compatibility with fast chromatographic separations using monolithic columns.     

The importance of chain length for the polyphosphate enhancement of acidic potassium permanganate chemiluminescence

Sodium polyphosphate is commonly used to enhance chemiluminescence reactions with acidic potassium permanganate through a dual enhancement mechanism, but commercially available polyphosphates vary greatly in composition. We have examined the influence of polyphosphate composition and concentration on both the dual enhancement mechanism of chemiluminescence intensity and the stability of the reagent under analytically useful conditions. The average chain length (n) provides a convenient characterisation, but materials with similar values can exhibit markedly different distributions of phosphate oligomers. There is a minimum polyphosphate chain length (∼6) required for a large enhancement of the emission intensity, but no further advantage was obtained using polyphosphate materials with much longer average chain lengths. Providing there is a sufficient average chain length, the optimum concentration of polyphosphate is dependent on the analyte and in some cases, may be lower than the quantities previously used in routine detection. However, the concentration of polyphosphate should not be lowered in permanganate reagents that have been partially reduced to form high concentrations of the key manganese(III) co-reactant, as this intermediate needs to be stabilised to prevent formation of insoluble manganese(IV).     

Chemiluminescence detection of the benzodiazepine loprazolam

The screening of seven benzodiazepines for chemiluminescent reactions with oxidising and reducing agents is reported. Only one (loprazolam) gave any significant emission. The conditions for the chemiluminescence emission from the reaction between acidic potassium permanganate and loprazolam were optimised. The limit of detection was 163 ng (7×10^?6 mol per 50 μl) of loprazolam. The application of this reaction to the analysis of pharmaceutical preparations is discussed.     

Chemiluminescence accompanied by the reaction of gold nanoparticles with potassium permanganate

It was found that potassium permanganate (KMnO(4)) could react with gold nanoparticles in a strong acid medium to generate particle size-dependent chemiluminescence (CL). For gold nanoparticles with the size of 2.6 or 6.0 nm, the reaction was fast and could produce the excited state Mn(II) with light emission around 640 nm. For gold nanoparticles larger than 6.0 nm, no light emission was observed due to a much slower reaction rate. The CL intensity was found to increase linearly with the concentration of 2.6 nm gold nanoparticles. The effects of the acid medium, concentration of KMnO(4) and presence of N(2) and O(2) were investigated. UV-Vis absorption spectra and X-ray photoelectron spectra (XPS) measured before and after the CL reaction were analyzed. A CL mechanism has been proposed suggesting that the potassium permanganate was reduced by gold nanoparticles in the strong acid medium to the excited state Mn(II), yielding light emission. The results bestow new light on the size-dependent chemical reactivities of the gold nanoparticles and on nanoparticle-induced chemiluminescence. The CL reaction was considered to be of potential use for bioanalysis applications.     

Selective determination of amino acids using flow injection analysis coupled with chemiluminescence detection

The determination of the amino acids proline, histidine, tyrosine, arginine, phenylalanine and tryptophan using flow injection analysis (FIA) with chemiluminescence detection is described. Proline was the only amino acid to exhibit chemiluminescence with the tris(2,2-bipyridyl)ruthenium(III) reaction at pH 10. While, histidine was found to selectively enhance the reaction of luminol with Mn(II) salts in a basic medium. Acidic potassium permanganate chemiluminescence was able to selectively determine tyrosine at pH 6.75. Low pressure separations using a C18 guard column allowed the simultaneous determination of tyrosine and tryptophan or phenylalanine and tryptophan with acidic potassium permanganate and copper(II)-amino acid-hydrogen peroxide chemiluminescence, respectively. Precision for each method was less than 3.9% (R.S.D.) for five replicates of a standard (1×10⁻⁵ M) and the detection limits ranged between 4×10⁻⁹ and 7×10⁻⁶ M. Preliminary investigations revealed that the methodology developed was able to selectively determine the individual amino acids in an equimolar mixture of the 20 naturally occurring amino acids.     

Role of chemiexcited particles in permanganate reduction by citric acid: Investigation with spectrophotometric and chemiluminescence methods

Potassium permanganate reduction by citric acid in the presence of sulfuric acid includes stages of chemigeneration of electronically excited Mn(II) and emission of photons by it. The electronic absorption, reactant concentration, and chemiluminescence kinetics have been investigated. It has been shown that the chemiexcited species Mn(II) (chemiluminescence emitter) acts as a permanganate reduction catalyst.     

Simultaneous stopped-flow determination of morphine and naloxone by time-resolved chemiluminescence

The first application of the flow analysis coupled with chemiluminescence detection and based on stopped-flow chemistry to the simultaneous determination of two components, using a two equation system, is described. The proposed method to determine simultaneously morphine and naloxone is based on the chemiluminescence oxidation of these compounds by their reaction with potassium permanganate in an acidic medium. The main feature of the system used is that the recording of the whole chemiluminescence intensity-versus-time profiles can be obtained, using the stopped-flow technique in a continuous-flow system. Then, the chemiluminescent signals obtained at two times of these profiles can be used to determine the concentration of both opiate narcotics. The effect of common emission enhancers on the chemiluminescence emission of these compounds in different acidic media, using the above-mentioned technique, was studied, in order to achieve the best conditions in which, the CL profiles of both compounds should be additive. The parameters selected were sulphuric acid 1.0 mol L⁻¹, permanganate 0.2 mmol L⁻¹ and formaldehyde 0.8 mol L⁻¹. Taken in account the different profiles of the transient CL signal obtained with each compounds, using the selected chemical conditions, two measurement times (1.4 and 4.8 s) of these responses curves were considered with the purpose to establish a simple 2 × 2 matrix calculation. Using the chemiluminiscent signals obtained at these times, a linear calibration graph was obtained for each one of the compounds between 0.01 and 1.00 mg L⁻¹ for morphine and 0.10–1.50 mg L⁻¹ for naloxone. The present chemiluminescence procedure was applied to the determination of both compounds in mixtures and was found to be satisfactory.     

Analytical applications of photoinduced chemiluminescence in flow systems--a review

In this review, the recent evolution and the state of the art of photochemical reactions coupled with chemiluminescence processes are presented. Different chemiluminescence systems have been considered together with suitable photochemical derivatization processes that can affect either the analyte of interest or even the chemiluminogenic reagent, producing some derivatives able to participate more efficiently in the CL reactions and enhancing the CL emission. The on-line integration of the photochemical reactions as well as the coupling of this resulting photoinduced chemiluminescence (PICL) method with dynamic analytical systems, such as flow injection analysis, liquid or gas chromatography and capillary electrophoresis, have been discussed. Important applications of PICL have been proposed in environmental, pharmaceutical and food analysis.     

Permanganate-based chemiluminescence analysis of ferulic acid using flow injection.

A simple, sensitive and rapid flow-injection chemiluminescence method has been developed for the determination of ferulic acid based on the chemiluminescence reaction of ferulic acid with potassium permanganate in a nitric acid medium. A strong chemiluminescence signal was observed when ferulic acid was injected into an acidic potassium permanganate solution in a flow-cell. The present method allowed the determination of ferulic acid in the concentration range of 6.0 x 10(-6) to 2.0 x 10(-4) mol l(-1); the detection limit (3sigma) for ferulic acid was 9.6 x 10(-8) mol l(-1). The relative standard deviation was 1.0% for 11 replicate analyses of 2.0 x 10(-4) mol l(-1) ferulic acid. The proposed method was applied to the determination of ferulic acid in real samples with satisfactory results. Moreover, the reaction mechanism of the chemiluminescence system was primarily considered.     

Sensitive determination of captopril by time-resolved chemiluminescence using the stopped-flow analysis based on potassium permanganate oxidation

The chemiluminescent behaviour of captopril when reacted with a common oxidant, potassium permanganate in different acidic media is described, using the stopped-flow technique in a continuous-flow system. A 22 bit analogue-to-digital converter that acquires analogue signals at −10 and +10 V and allows the power supply to the peristaltic pump to be interrupted is used in the time-resolved chemiluminescence manifold to ensure rapid, efficient mixing of chemiluminescent reagent and sample immediately before reaching the detector; this results in high precision and detectability, particularly with fast, short-lived emissions.The optimum chemical conditions for the chemiluminescence emission were investigated. It was found that a weak CL emission was emitted during the oxidation of this drug with potassium permanganate in acidic solution. The effect of common emission enhancers such as formic acid, formaldehyde, glutaraldehyde, acetaldehyde, quinine, fluorescein, rhodamine B and rhodamine 6G was studied. The parameters selected were 4.0 mol L⁻¹ sulphuric acid, 0.25 mmol L⁻¹ permanganate and 0.75 mol L⁻¹ formaldehyde.Four quantitative parameters adjustable via software settings, two of them typically kinetic parameters, such as rate of the light-development reaction and rate of the light-decay reaction, and the other conventional parameters, such as maximum emission intensity and total emission area, were used to obtain linear calibration graphs with each measurement parameter. The detection limits ranged from 0.011 to 0.026 μg mL⁻¹ and R.S.D. values (n = 10) of 1.21-3.93 at a 0.50 μg mL⁻¹ and 2.01-3.41 at a 1.60 μg mL⁻¹ concentration levels were obtained. The method was satisfactorily applied to the determination of captopril in pharmaceutical preparations.     

Determination of morphine, oripavine and pseudomorphine using capillary electrophoresis with acidic potassium permanganate chemiluminescence detection

A simple and robust capillary electrophoresis chemiluminescence detection system for the determination of morphine, oripavine and pseudomorphine is described, based upon the reaction of these analytes with acidic potassium permanganate in the presence of sodium polyphosphate. The reagent solution was contained in a quartz detection cell which also held both the capillary and the anode. The resultant chemiluminescence was monitored directly using a photomultiplier tube mounted flush against the base of the detection cell. To ensure that no migration of the permanganate anion occurred, the anode was placed at the detector end whilst the electroosmotic flow was reversed by the addition of hexadimethrine bromide (0.001% m/v) to the electrolyte. The three analytes were separated counter to the electroosmotic flow via their interaction with alpha-cyclodextrin. The methodology realised detection limits (3 x S/N) of 2.5 x 10(-7) M for both morphine and oripavine and 5 x 10(-7) M for pseudomorphine. The relative standard deviations of the migration times and the peak heights for the three analytes ranged from 0.6 up to 0.8% and from 1.5 up to 2.1%, respectively.     

Chemiluminescence during the oxidation of alcohols by permanganate: application to the determination of ethanol in gin

Chemiluminescence is observed during the oxidation of ethanol with potassium permanganate under very acidic conditions. Factors affecting the chemiluminescence signal are discussed. Based on this chemiluminescence reaction, a method for the determination of alcohol in gin was developed. The method, which has a detection limit of 0.3% (v/v) and a relative standard deviation of about 1% at 40.0% (v/v), was used in the determination of ethanol in three different brands of gin with no sample preparation.