Layer-by-layer Multilayer Films Self-assembled from a Rare-earth-containing Poly-oxometalate Na_9[Eu(W_5O_(18))_2] and Poly(allylamine hydrochloride) and Their Photoluminescent Properties

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙ ,ｃｏｎｓｉｄｅｒａｂｌｅｉｎｔｅｒｅｓｔｈａｓｂｅｅｎｄｅｖｏｔｅｄｔｏａｓｓｅｍｂｌｉｎｇｎａｎｏｓｃａｌｅｂｕｉｌｄｉｎｇｂｌｏｃｋｓｗｉｔｈｖａｒｉｏｕｓｉｎｏｒ ｇａｎｉｃａｎｄ/ｏｒｏｒｇａｎｉｃｃｏｍｐｏｓｉｔｉｏｎｓｉｎｔｏｕｌｔｒａｔｈｉｎｍｕｌｔｉｌａｙ ｅｒｅｄｆｉｌｍｓｂｙｖｅｒｓａｔｉｌｅａｓｓｅｍｂｌｉｎｇｓｔｒａｔｅｇｉｅｓａｓｔｈｅｓｅｆｉｌｍｓｃａｎｏｆｆｅｒｇｒｅａｔｐｏｔｅｎｔｉａｌｆｏｒａｐｐｌｉｃａｔｉｏｎｓｓｕｃｈ…     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Electrochemical behavior and luminescent properties of a multilayer film containing mixed-addenda polyoxometalates K10H3[Eu(SiMo9W2O39)2] and tris(2,2'-bipyridine)ruthenium(II)

Inorganic-organic composite films containing the mixed-addenda heteropolytungsto-molybdate K(10)H(3)[Eu(SiMo(9)W(2)O(39))(2)]xH(2)O (abbreviated as EuSiMo(9)W(2)) and tris(2,2'-bipyridine)ruthenium(II) Ru(bpy)(2+)(3) (abbreviated as Ru(bpy)(3)) were fabricated by the layer-by-layer self-assembly method. UV-vis spectroscopy shows that the absorbance values at characteristic peaks increase linearly with the number of EuSiMo(9)W(2)/Ru(bpy)(3) bilayers, suggesting that the deposition process is linear and highly reproducible from layer to layer. The composition of the multilayer film was measured by X-ray photoelectron spectra. Atomic force microscopy presented a correspondingly uniform surface morphology and a homogeneity of the multilayer films. The film exhibited photoluminescence arising from the d-pi* metal-to-ligand transition of Ru(2+), and (5)D(0) metastable state to terminate levels in the (7)F(J) (J=0-4) ground-state multiplet transitions of Eu(3+). The film also exhibited catalytic activities toward the reduction of IO(-)(3), H(2)O(2), BrO(-)(3), NO(-)(2) and the oxidation of C(2)O(2-)(4). It may provide a novel material as bifunctional electrocatalysts and fluorescence probes in biochemistry, luminescence sensors, electroluminescent optical devices, and so on.     

Layer-by-layer deposited multilayer films of oligo(pyrenebutyric acid) and a perylene diimide derivative: structure and photovoltaic properties

Multilayer films of oligo(pyrenebutyric acid) (OPB) and N,N'-bis(N,N-dimethylaminopropylaminopropyl)-3,4,9,10-perylenediimide (BDMAPAP-PDI) were successfully fabricated by layer-by-layer deposition. Multilayer growth was monitored by ultraviolet-visible (UV-vis) spectroscopy, fluorescence spectroscopy, ellipsometry, and atomic force microscopy (AFM). It was found that extraction was scarcely observed although both components (OPB and BDMAPAP-PDI) have low molecular weights and both electrostatic interactions and pi-pi stacking contributed to the multilayer deposition. The multilayers exhibit a rapid photocurrent response, and excitations of both OPB and BDMAPAP-PDI can lead to the effective charge dissociation. The incident photon to current conversion efficiency (IPCE) of the composite film with 5 bilayers was measured to be 1.29% at the absorption peak of BDMAPAP-PDI. Fluorescence quenching and photovoltaic conversion studies indicated that strong photoinduced charge transfer interactions occurred at the area of OPB/BDMAPAP-PDI heterojunction in the films, which strongly enhanced the photoresponse of the multilayer films.     

Synthesis, characterization and immobilization of Prussian blue nanoparticles. A potential tool for biosensing devices

Prussian blue (PB) particles with the size of ca. 5 nm were synthesized and immobilized in a multilayer structure, as a strategy for the potential development of an amperometric transducer for oxidase-enzyme-based biosensors. Multilayer films composed of PB and poly(allylamine hydrochloride) (PAH) were prepared via layer-by-layer (LbL) sequential deposition. The process was carefully monitored by UV-vis spectroscopy and cyclic voltammetry. The increase of the redox current peaks during the layer-by-layer deposition demonstrated that charge propagation within the film occurs. Linear increase of UV-vis absorbance with the number of deposited bilayers indicates that well-organized systems have been elaborated. ITO electrodes coated with PB/PAH films were used successfully for detecting H2O2, sensitivity being dependent on the number of PB/PAH layers.     

Polyelectrolyte blend multilayer films: surface morphology, wettability, and protein adsorption characteristics

We report the influence of polyelectrolyte (PE) multilayer films prepared from poly(styrene sulfonate)-poly(acrylic acid) (PSS-PAA) blends, deposited in alternation with poly(allylamine hydrochloride) (PAH), on film wettability and the adsorption behavior of the protein immunoglobulin G (IgG). Variations in the chemical composition of the PAH/(PSS-PAA) multilayer films, controlled by the PSS/PAA blend ratio in the dipping solutions, were used to systematically control film thickness, surface morphology, surface wettability, and IgG adsorption. Spectroscopic ellipsometry measurements indicate that increasing the PSS content in the blend solutions results in a systematic decrease in film thickness. Increasing the PSS content in the blend solutions also leads to a reduction in film surface roughness (as measured by atomic force microscopy), with a corresponding increase in surface hydrophobicity. Advancing contact angles (theta) range from 7 degrees for PAH/PAA films through to 53 degrees for PAH/PSS films. X-ray photoelectron spectroscopy measurements indicate that the increase in film hydrophobicity is due to an increase in PSS concentration at the film surface. In addition, the influence of added electrolyte in the PE solutions was investigated. Adsorption from PE solutions containing added salt favors PSS adsorption and results in more hydrophobic films. The amount of IgG adsorbed on the multilayer films systematically increased on films assembled from blends with increasing PSS content, suggesting strong interactions between PSS in the multilayer films and IgG. Hence, multilayer films prepared from blended PE solutions can be used to tune film thickness and composition, as well as wetting and protein adsorption characteristics.     

Photo-cross-linkable polyelectrolyte multilayers for 2-D and 3-D patterning

We report the synthesis of poly(acrylic acid-ran-vinylbenzyl acrylate) (PAArVBA), a photo-cross-linkable weak polyelectrolyte, and its incorporation into polyelectrolyte multilayer (PEM) films. PEM films assembled from PAArVBA and poly(allylamine hydrochloride) (PAH) are found to exhibit similar thickness trends with assembly pH as those previously reported for poly(acrylic acid) (PAA)/PAH multilayers. Swelling properties of the as-built and photo-cross-linked films are studied by in situ ellipsometry. Two-dimensional masking techniques are used to pattern regions of high and low swelling, as confirmed by atomic force microscopy (AFM), and to provide spatial control over the low-pH-induced microporosity transition exhibited by PAH/PAA PEMs. Films containing alternating blocks of PAH/PAArVBA bilayers and PAH/PAA bilayers were assembled, laterally photopatterned, and exposed to low-pH solution to generate nanoporosity leading to patterned Bragg reflectors, thereby demonstrating three-dimensional control over film structure in these weak PEM assemblies.     

Layer-by-layer self-assembly of multilayer films containing DNA and Eu3+: their characteristics and interactions with small molecules

Thin films of alternating DNA and rare earth ion Eu3+ layers from dilute aqueous solutions were fabricated onto quartz substrates and silicon wafers through the layer-by-layer (LbL) self-assembly technique. UV-visible spectroscopy shows that a uniform layer of DNA can be fully adsorbed onto each alternate Eu3+ layer. Microscopic FTIR spectra show Eu3+ interacts with both the phosphate groups and nitrogenous bases of DNA, and the formation of [DNA/Eu]n films induces a change of the conformation of the DNA secondary structure to a certain extent. Various parameters affecting the DNA or Eu3+ loading into the composite film were investigated with emphasis on the effect of the pH and ionic strength of the DNA solution used for the film preparation. Atomic force microscopy was utilized to observe the morphologies of the DNA in the films obtained at two different pH values. Small molecules, such as alpha-tenoyltrifluoroacetone (TTA), Hoechst 33258 (Hoe), and ethidium bromide (EB), are all observed to interact with Eu3+ or DNA in the [DNA/Eu]n films. The [DNA/Eu]n films incorporated with these molecules show different fluorescent characteristics, and the fluorescence intensity of the films versus the bilayer number has a good linear relationship, confirming the potential for creating a different luminescence ability of the multilayer by controlling the number of DNA/Eu bilayers.     

Redox properties of the ferricyanide ion on electrodes coated with layer-by-layer thin films composed of polysaccharide and poly(allylamine)

Polyelectrolyte multilayer thin films were prepared by an alternate deposition of poly(allylamine hydrochloride) (PAH) and anionic polysaccharides {carboxymethylcellulose (CMC) and alginic acid (AGA)} on the surface of a gold (Au) disk electrode, and the binding of ferricyanide [Fe(CN)(6)](3)(-) and hexaammine ruthenium ions [Ru(NH(3))(6)](3+) to the films was evaluated. Poly(acrylic acid) (PAA) was also employed as a reference polyanion bearing carboxylate side chains. A quartz-crystal microbalance study showed that PAH-CMC and PAH-AGA multilayer films grow exponentially as the number of depositions increases. The thicknesses of five bilayers of (PAH-CMC)(5) and (PAH-AGA)(5) films were estimated to be 150 +/- 20 and 90 +/- 15 nm, respectively, in the dry state. The PAH/polysaccharide multilayer film-coated Au electrodes exhibited a redox response to the [Fe(CN)(6)](3)(-) ion dissolved in solution, irrespective of the sign of the surface charge of the film, suggesting the high permeability of the films to the [Fe(CN)(6)](3)(-) ion. In contrast, the PAH-PAA film-coated Au electrodes exhibited a redox response only when the outermost surface of the film was covered with a positively charged PAH layer. However, the permeation of the [Ru(NH(3))(6)](3+) cation was severely suppressed for all of the multilayer films. It was possible to confine the [Fe(CN)(6)](3)(-) ion in the films by immersing the film-coated electrodes in a 1 mM [Fe(CN)(6)](3)(-) solution for 15 min. Thus, the [Fe(CN)(6)](3)(-)-confined electrodes exhibited a cyclic voltammetric response in the [Fe(CN)(6)](3)(-) ion-free buffer solution. The loading of the [Fe(CN)(6)](3)(-) ion in the films was higher when the surface charge of the film was positive and increased with increasing film thickness. It was also found that the [Fe(CN)(6)](3)(-) ion confined in the films serves as an electrocatalyst that oxidizes ascorbic acid in solution.     

Fabrication of titanium dioxide and tungstophosphate nanocomposite films and their photocatalytic degradation for methyl orange

Photocatalytic multilayer films with different numbers of bilayers were prepared via an electrostatic layer-by-layer (LbL) self-assembly method. These LbL films were characterized by UV-vis spectroscopy, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Our results indicate that TiO(2) and tungstophosphate (H(3)PW(12)O(40), abbreviated as PW(12)) are successfully incorporated into the thin films. The as-prepared (TiO(2)/PW(12))(n) films show good photocatalytic performance toward methyl orange (MO) solution at pH 2.0, which is attributed to the synergistic effect between TiO(2) and PW(12). The effect of experimental parameters including number of bilayers, initial concentration, and pH value of dye solution were also studied. The multilayer films can be easily recovered and reused several times with little change of degradation, indicating that they are stable under the ultraviolet (UV) irradiation. The detection of active species displays that active holes (h(+)) play a dominant role for MO photodegradation in the TiO(2)/PW(12) system. Taking advantage of immobilization of catalysts on glass slides, the problem of recovery is solved. It is expected that photocatalytic multilayer films have substantial applications in industry.     

聚乙烯咔唑/杂多阴离子杂化LB膜的制备、结构与光电性质

首次选用聚乙烯咔唑（PVK）、二十二烷酸（BA）与杂多阴离子用LB技术制备 了五种有机/无机杂化LB膜，PVK/BA/HPC（HPC = Na_5(PZ(H_2O)Mo_(11)O_(39)]· 5H_2O, Z = Mn, Co, Cu, Zn, Ni）。用原子力显微镜（AFM），UV-vis，小角X射 线衍射（LAXRD），表面光电压谱（SPS），荧光光谱等对LB膜的结构与性质进行了 表征。结果表明：它们在空气/水界面有好的成膜性能，崩溃压为22 ～27 mN/m， 杂多阴离子作为一个单层夹在PVK和BA双层之间。PVK/BA/HPC LB膜的光致发光具有 PVK激基缔合物的特征荧光，其光电压谱有较强的光电响应。     

A novel layer-by-layer approach for the fabrication of conducting polymer/RNA multilayer films for controlled release

Poly(anilineboronic acid) (PABA)/ribonucleic acid (RNA) multilayer films were prepared under neutral condition using a layer-by-layer deposition of PABA and RNA. RNA was used both as a polyelectrolyte for multilayer formation as well as dopant for PABA. Photoelastic modulated infrared reflection absorption spectroscopy measurements suggest that PABA interacts covalently with RNA through the formation of a boronate ester, a boron-nitrogen dative bond, as well as electrostatic interactions of anionic phosphates with cationic amines. The deposition procedure was monitored with UV-vis absorption spectroscopy, showing a linear dependence of absorbance with the number of PABA/RNA bilayers deposited. The multilayer films were further characterized using X-ray photoelectron spectroscopy and ellipsometry, which yielded a PABA/RNA bilayer thickness of approximately 10 nm. The PABA/RNA multilayer films are redox-active at neutral pH, consistent with the formation of a self-doped polymer. Electrochemical control of PABA under these conditions allows potential-induced controlled release of RNA from a multilayer at neutral pH, suggesting that this may serve as a novel method for controlled release of RNA under physiological conditions.     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

Assembly of ultrathin polymer multilayer films by click chemistry

Layer-by-layer (LbL) assembly is a versatile and robust technique for fabricating tailored thin films of diverse composition. Herein we report a new method of covalent coupling, click chemistry, to facilitate the LbL assembly of thin films. Linear film growth was observed using both UV-vis and FTIR spectroscopy, and film thicknesses were determined by ellipsometry and atomic force microscopy. The assembled films are shown to be stable in a wide pH range. This technique offers the potential to enable the synthesis of new types of stable and responsive LbL films from a variety of polymers.     

Electrochromic multilayer films of tunable color by combination of copper or iron complex and monolacunary dawson-type polyoxometalate

Electrochromic multilayer films consisting of polyoxometalate (POM) cluster alpha-K(10)[P(2)W(17)O(61)].17H(2)O (P(2)W(17)), copper(II) complex [Cu(II)(phen)(2)](NO(3))(2) (phen = 1,10-phenithroline), and iron complex [Fe(II)(phen)(3)](ClO(4))(2) were fabricated on silicon, quartz and ITO substrates by layer-by-layer self-assembly method. The multilayer films, PSS/Cu(II)(phen)(2)/[(P(2)W(17)/Cu(II)(phen)(2))](n) and PSS/Fe(II)(phen)(3)/[(P(2)W(17)/Fe(II) (phen)(3))](n) were characterized by UV-vis spectra, X-ray photoelectron spectra, cyclic voltammetry (CV), chronoamperometric (CA) and in-situ spectral electrochemical measurements. The interesting feature of the electrochromic film is its adjustable color by reduction of both transition metal complex and polyoxometalate at different potentials. The multilayer films also exhibit high optical contrast, suitable response time and low operation potential due to the presence of mono-lacunary-substituted polyoxometalate and transition metal complex. This is the first example that the color of electrochromic film can be adjustable, which gives valuable information for exploring new electrochromic materials with tunable colors.     

Self-assembled graphene/azo polyelectrolyte multilayer film and its application in electrochemical energy storage device

Graphene/azo polyelectrolyte multilayer films were fabricated through electrostatic layer-by-layer (LbL) self-assembly, and their performance as electrochemical capacitor electrode was investigated. Cationic azo polyelectrolyte (QP4VP-co-PCN) was synthesized through radical polymerization, postpolymerization azo coupling reaction, and quaternization. Negatively charged graphene nanosheets were prepared by a chemically modified method. The LbL films were obtained by alternately dipping a piece of the pretreated substrates in the QP4VP-co-PCN and nanosheet solutions. The processes were repeated until the films with required numbers of bilayers were obtained. The self-assembly and multilayer surface morphology were characterized by UV-vis spectroscopy, AFM, SEM, and TEM. The performance of the LbL films as electrochemical capacitor electrode was estimated using cyclic voltammetry. Results show that the graphene nanosheets are densely packed in the multilayers and form random graphene network. The azo polyelectrolyte cohesively interacts with the nanosheets in the multilayer structure, which prevents agglomeration of graphene nanosheets. The sheet resistance of the LbL films decreases with the increase of the layer numbers and reaches the stationary value of 1.0 × 10(6) Ω/square for the film with 15 bilayers. At a scanning rate of 50 mV/s, the LbL film with 9 bilayers shows a gravimetric specific capacitance of 49 F/g in 1.0 M Na(2)SO(4) solution. The LbL films developed in this work could be a promising type of the electrode materials for electric energy storage devices.     

碳纳米管/超支化重氮盐自组装膜的制备及性能研究

利用静电吸附自组装技术将酸化处理后的单壁碳纳米管(SWNTs)与超支化重氮盐(DAS)组装成多层膜.利用紫外光谱、椭偏仪、原子力显微镜、扫描电镜、拉曼光谱等对自组装膜的生长过程、膜厚增长、自组装膜表面形貌以及纳米管在膜中的存在状态等进行了检测,并利用纳米压痕仪测试了自组装膜的硬度和弹性模量.研究结果表明,SWNTs与DAS不仅发生了静电吸附,而且还发生了化学交联.同时碳纳米管均匀分散在自组装膜中.这两种因素的共同作用使得自组装膜表现出良好的纳米力学性能,硬度达到2.0GPa左右,弹性模量达到10.0GPa左右,而且可以从基底上剥离下来成为独立支撑膜.     

Study of film structure and adsorption kinetics of polyelectrolyte multilayer films: effect of pH and polymer concentration

The alternate adsorption of polycation poly(allylamine hydrochloride)(PAH) and the sodium salt of the polymeric dye poly(1-[ p-(3'-carboxy-4'-hydroxyphenylazo)benzenesulfonamido]-1,2-ethandiyl)(PCBS) on quartz crystals coated with silica was studied to understand the structural properties and adsorption kinetics of these films using a combination of quartz crystal microbalance with dissipation monitoring (QCM-D), absorbance, and ellipsometry measurements. In-situ deposition of the polycation PAH on QCM crystals was monitored, followed by rinsing with water and then deposition of the polyanion PCBS. The effects of polymer concentration and pH on film structure, composition and adsorption kinetics were probed. The polymers were adsorbed at neutral pH conditions and at elevated pH conditions where PAH was essentially uncharged to obtain much thicker films. The change in the resonant frequency, Deltaf, of the QCM-D showed a linear decrease with the number of bilayers, a finding consistent with absorbance and ellipsometric thickness measurements which showed linear growth of film thickness. By using the Delta f ratios of PCBS to PAH, the molar ratios of repeat units of PCBS to PAH in the bilayer films as determined by QCM-D were approximately 1:1 at polyelectrolyte concentrations 5-10 mM repeat unit, indicating complete dissociation of the ionic groups. The frequency and dissipation data from the QCM-D experiments were analyzed with the Voigt model to estimate the thickness of the hydrated films which were then compared with thicknesses of dry films measured by ellipsometry. This led to estimates of the water content of the films to be approximately 45 wt %. In addition to the QCM-D, some films were also characterized by a QCM which measures only the first harmonic without dissipation monitoring. For the deposition conditions studied, the deposited mass values measured by the QCM's first harmonic were similar to the results obtained using higher harmonics from QCM-D, indicating that the self-assembled polyelectrolyte films were rigid.     

Polyelectrolyte multilayer films of different charge density copolymers with synergistic nonelectrostatic interactions prepared by the layer-by-layer technique

Random copolymers composed of diallyldimethylammonium chloride (DADMAC) and acrylamide with varying contents (8-100 mol %) of the cationic DADMAC component were alternated with polyanionic, fully charged poly(styrenesulfonate) to form multilayer thin films. UV-vis spectrophotometry, FTIR spectroscopy, and quartz-crystal microgravimetry (QCM) were employed to follow multilayer buildup. Atomic force microscopy was used to obtain structural information. Layer thicknesses have been determined with small-angle X-ray scattering and ellipsometry, in addition to values calculated from QCM. While in previous work, a critical charge density limit could be observed, below which no layer growth is possible; in this system, multilayer formation takes place with copolymers with charge densities as low as 8 mol %. Instead of a continuous increase of adsorbed amounts with decreasing charge density above the critical charge density, as found in previous work, similar layer thicknesses for films with 100 and 8 mol % charged polyelectrolytes and maximally adsorbed amounts for copolymers in an intermediate charge density region have been found. This adsorption behavior is explained in terms of synergistic nonelectrostatic interactions between the polyelectrolytes used.     

Dense passivating poly(ethylene glycol) films on indium tin oxide substrates

We describe the formation and characterization of surface-passivating poly(ethylene glycol) (PEG) films on indium tin oxide (ITO) glass substrates. PEG chains with a molecular weight of 2000 and 5000 D were covalently attached to the substrates in a systematic approach using different coupling schemes. The coupling strategies included the direct grafting with PEG-silane, PEG-methacrylate, and PEG-bis(amine), as well as the two-step functionalization with aldehyde-bearing silane films and subsequent coupling with PEG-bis(amine). Elemental analysis by X-ray photoelectron spectroscopy (XPS) confirmed the successful surface modification, and XPS and ellipsometry provided values for film thicknesses. XPS and ellipsometry thickness values were almost identical for PEG-silane films but differed by up to 400% for the other PEG layers, suggesting a homogeneous layer for PEG-silane but an inhomogeneous distribution for other PEG coatings on the molecularly rough ITO substrates. Atomic force microscopy (AFM) and water contact angle goniometry confirmed the different degrees of surface homogeneity of the polymer films, with PEG-silane reducing the AFM rms surface roughness by 50% and the water contact angle hysteresis by 75% compared to uncoated ITO. The ability of the PEG layers to passivate the substrate against the nonspecific adsorption of biopolymers was tested using fluorescence-labeled immunoglobulin G and DNA oligonucleotides in combination with fluorescence microscopy. The results indicate a positive relationship between film density and homogeneity on one hand and the ability to passivate against biopolymer adhesion on the other hand. The most homogeneous layers prepared with PEG-silane reduced the nonspecific adsorption of fluorescence-labeled DNA by a factor of 300 compared to uncoated ITO. In addition, the study finds that the ratio of film thicknesses derived by ellipsometry and XPS is a useful parameter to quantify the structural integrity of PEG layers on molecularly rough ITO surfaces. The findings may be applied to characterize PEG or other polymeric films on similarly coarse substrates.