Spontaneous luminescence of Eu<Superscript>3+</Superscript> ions in porous Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanospheres

A study of the luminescence of Eu³⁺ ions in Y₂O₃ nanospheres indicates a significant influence of the porous structure of nanoparticles on the luminescence of dopant ions. It is shown that filling the nanopores of initially porous Y₂O₃ nanospheres shortens the decay time of the spontaneous luminescence of doping europium ions. The change in the decay time is associated with the change in the effective refractive index of the porous nanospheres.     

Local structure of Gd<Superscript>3+</Superscript> and Eu<Superscript>2+</Superscript> impurity centers in a CdF<Subscript>2</Subscript> crystal

The local crystal structure of Gd³⁺ and Eu²⁺ cubic impurity centers in cadmium fluoride is calculated within the shell model in the pair potential approximation. The local compressibility of the cationic and anionic sublattices of the host lattice is determined in the vicinity of the Gd³⁺ (Eu²⁺) impurity ion.     

Photolumiscent Properties of Nanorods and Nanoplates Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript>

Nanorods and nanoplates of Y₂O₃:Eu³⁺ powders were synthesized through the thermal decomposition of the Y(OH)₃ precursors using a microwave-hydrothermal method in a very short reaction time. These powders were analyzed by X-ray diffraction, field emission scanning electron microscopy, Fourrier transform Raman, as well as photoluminescence measurements. Based on these results, these materials presented nanoplates and nanorods morphologies. The broad emission band between 300 and 440 nm ascribed to the photoluminescence of Y₂O₃ matrix shifts as the procedure used in the microwave-hydrothermal assisted method changes in the Y₂O₃:Eu³⁺ samples. The presence of Eu³⁺ and the hydrothermal treatment time are responsible for the band shifts in Y₂O₃:Eu³⁺ powders, since in the pure Y₂O₃ matrix this behavior was not observed. Y₂O₃:Eu³⁺ powders also show the characteristic Eu³⁺ emission lines at 580, 591, 610, 651 and 695 nm, when excited at 393 nm. The most intense band at 610 nm is responsible for the Eu³⁺ red emission in these materials, and the Eu³⁺ lifetime for this transition presented a slight increase as the time used in the microwave-hydrothermal assisted method increases.     

Correction of the band gap of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> phosphor

Submicron samples of Y₂O₃:Eu³⁺ phosphor with elevated photoluminescence (PL) efficiency and activator concentration of 9 at % obtained by the sol–gel method were investigated by diffuse reflection spectroscopy and PL spectroscopy. It is found that the diffuse reflection spectrum in the vicinity of the fundamental absorption edge (<300 nm) is distorted by the superposition of the PL of Eu³⁺ ions, as a result of which the calculated value of optical band gap E _g of the Y₂O₃ matrix is overestimated. An algorithm for eliminating the PL influence on the absorption edge is proposed, and the correct E _g values are found to be 4.61 ± 0.12 and 4.50 ± 0.12 eV for annealing at 700 and 1300°C, respectively.     

Optical absorption by Nd<Superscript>3+</Superscript> and Gd<Superscript>3+</Superscript> ions in epitaxial films grown on Gd<Subscript>3</Subscript>Ga<Subscript>5</Subscript>O<Subscript>12</Subscript> substrates from a lead-containing solution melt

Epitaxial films of composition (Gd,Nd)₃Ga₅O₁₂ or (Gd,Y,Nd)₃Ga₅O₁₂ with a neodymium content varying from 0.3 to 15 at. % are grown by liquid-phase epitaxy from a supercooled PbO-B₂O₃-based solution melt on Gd₃Ga₅O₁₂(111) substrates. The optical absorption spectra of the epitaxial films grown are measured in the wavelength range 0.2–1.0 µm. The results of interpreting the absorption bands observed in the spectra are used to construct the energy level diagrams of Nd³⁺ and Gd³⁺ ions in the matrices of the epitaxial films.     

Luminescence thermometry using Gd<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>3+</Superscript>

In this paper we study the possibility of using the synthesized nanopowder samples of Gd₂Zr₂O₇:Eu³⁺ for temperature measurements by analyzing the temperature effects on its photoluminescence. The nanopowder was prepared by solution combustion synthesis method. The photoluminescence spectra used for analysis of Gd₂Zr₂O₇:Eu³⁺ nano phosphor optical emission temperature dependence were acquired using continuous laser diode excitation at 405 nm. The temperature dependencies of line emission intensities of transitions from ⁵D₀ and ⁵D₁ energy levels to the ground state were analyzed. Based on this analysis we use the two lines intensity ratio method for temperature sensing. Our results show that the synthesized material can be efficiently used as thermographic phosphor up to 650 K.     

Identification of luminescence bands of Nd<Superscript>3+</Superscript> ions in yttrium aluminates Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and YAlO<Subscript>3</Subscript>

The pulsed cathodoluminescence spectra of yttrium aluminum garnet and perovskite activated by neodymium are investigated at room temperature in the wavelength range 250–750 nm. The luminescence bands are identified, and all of them are assigned to Nd³⁺ transitions, including those from the doublet levels.     

Luminescence of Eu<Superscript>3+</Superscript> rare-earth ions in Lu<Subscript>2</Subscript>O<Subscript>3</Subscript> nanospheres

The kinetics of luminescence of Eu³⁺ ions in Lu₂O₃:Eu nanospheres with diameters of 100–270 nm and a small standard deviation of the size distribution <15% has been studied. A sharp decrease in the decay time of luminescence of Eu³⁺ ions in the red range with an increase in the diameter of nanospheres has been attributed to the appearance of a photon mode accelerating spontaneous luminescence, which is confirmed by the calculation of ranges of existence of whispering-gallery modes in studied nanospheres.     

Investigation of luminescence spectra of the Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce single-crystal films

The luminescence spectra of single-crystal films and bulk crystals of yttrium-aluminum garnet Y₃Al₅O₁₂ and Ce³⁺-activated Y₃Al₅O₁₂ were investigated. It was shown that the room-temperature luminescence intensity of the Ce³⁺-free single-crystal Y₃Al₅O₁₂ film was considerably lower than that of the bulk crystals, while the luminescence intensity of the Ce³⁺ ions in the Y₃Al₅O₁₂:Ce films was considerably higher than that one for the corresponding bulk crystal.     

Morphology-dependent luminescence behavior of Y<Subscript>2-x</Subscript>Gd<Subscript>x</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> thin-film phosphors grown by a laser ablation

Y_2-xGd_xO₃:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed laser deposition. Films grown under different deposition conditions have been characterized using microstructural and luminescence measurements. The crystallinity, surface morphology and photoluminescence (PL) of the films are highly dependent on the amount of Gd present. The photoluminescence (PL) brightness data obtained from Y_2-xGd_xO₃:Eu³⁺ films grown under optimized conditions have indicated that Al₂O₃(0001) is one of the most promising substrates for the growth of high-quality Y_2-xGd_xO₃:Eu³⁺ thin-film red phosphors. In particular, the incorporation of Gd into the Y₂O₃ lattice could induce a remarkable increase of PL. The highest emission intensity was observed with Y_1.35Gd_0.60Eu_0.05O₃, whose brightness was increased by a factor of 3.1 in comparison with that of Y₂O₃:Eu³⁺ films. This phosphor may be promising for application in flat-panel displays. PACS 78.20.-e; 78.55.-m; 78.66.-w     

Quantum cutting in Gd<Subscript>2</Subscript>SiO<Subscript>5</Subscript>: Eu<Superscript>3+</Superscript> by VUV excitation

The emission and excitation spectra of Gd₂SiO₅∶Eu³⁺ were investigated using the VUV beam line of the Beijing Synchrotron Radiation Facility (BSRF). The experimental results were discussed in the frame of visible quantum cutting process involved in Gd³⁺−Eu³⁺ system. Upon direct excitation into the⁶G _J states of Gd³⁺, two visible photon emissions from Eu³⁺ were observed. Cursory evaluation proved that Gd₂SiO₅∶Eu³⁺ is an efficient visible quantum cutter.     

Synthesis and characterization of mono-dispersed Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Er<Superscript>3+</Superscript>-coated SiO<Subscript>2</Subscript> nanoparticles by co-precipitation process

In this paper, a facile co-precipitation process for preparing mono-dispersed core–shell structure nanoparticles is reported. The 110 nm SiO₂ cores coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺ were synthesized and the influence of the concentration ratio of [urea]/[metal ions] on the final product was investigated. The structure and morphology of samples were characterized by the X-ray powder diffraction, Fourier transform IR spectroscopy and transmission electron microscopy, respectively. The results indicate that a layer of well-crystallized garnet Y₃Al₅O₁₂:Er³⁺ were successfully coated on the silica particles with the thickness of 20 nm. The near infrared and upconversion luminescent spectra of the SiO₂@Y₃Al₅O₁₂:Er³⁺ powders further confirm that a Y₃Al₅O₁₂:Er³⁺ coating layer has formed on the surface of silica spherical particles.     

Red,Yellow, Blue and Green Emission from Eu<Superscript>3+</Superscript>, Dy<Superscript>3+</Superscript> and Bi<Superscript>3+</Superscript> Doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript>nano-Phosphors

Rare earth elements (RE = Eu³⁺& Dy³⁺)and Bi³⁺ doped Y₂O₃ nanoparticles were synthesized by urea hydrolysis method in ethylene glycol, which acts as reaction medium as well as a capping agent, at a low temperature of 140 °C,followed by calcination of the obtained product. Transmission electron microscope (TEM) images reveals that ovoid shaped Y₂O₃ nanoparticles of around 22–24 nm size range were obtained in this method. The respective RE and Bi³⁺ doped Y₂O₃ precursor nanoparticles when heated at 600 and 750 °C, retains the same shape as that of the as-synthesized Y₂O₃ precursor samples. From EDAX spectra, the incorporation of RE ions into the host has been studied. XRD pattern reveals the crystalline nature of the heated nanoparticles and indicate the absence of any impurity phase other than cubic Y₂O₃.However, the as-synthesized nanoparticles were highly amorphous without the presence of any sharp XRD peaks. Photoluminescence study suggests that the synthesized samples could be used as red (Eu³⁺), yellow (Dy³⁺), blue and green (Bi³⁺)emitting phosphors.     

Spectral properties of Nd<Superscript>3+</Superscript> ions in samples of transparent Y<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramics

The spectral and luminescent characteristics of samples of Y₂O₃:Nd³⁺ ceramics obtained from different precursors under different preparation conditions (the concentration of an HfO₂ compacting additive, the temperature and time of synthesis) are studied at 300 and 77 K. It is shown that the spectral positions of absorption and luminescence lines of ceramics correspond to those of a Y₂O₃:Nd³⁺ single crystal. At the same time, the absorption and luminescence spectra show an inhomogeneous broadening, characteristic of disordered crystals and glass. The energies of the ⁴ I _9/2 and ⁴ F _3/2 Stark states of the Nd³⁺ ion are calculated. The calculation results nearly coincide with the data from the literature for the Y₂O₃:Nd³⁺ single crystal and transparent ceramics. Samples containing the compacting additive show additional lines, whose intensities correlate with its concentration and the method of preparation of Y₂O₃:Nd³⁺ ultradispersed powders. It is assumed that these lines are related to the fact that either Nd³⁺ ions enter the composition of the HfO₂ compacting additive or Hf⁴⁺ ions are present in the nearest environment of Nd³⁺ ions at the boundaries of granules enriched with HfO₂.     

The influence of the specific surface of grains on the luminescence properties of Nd<Superscript>3+</Superscript>-doped Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> nanopowders

Nd³⁺:Y₃Al₅O₁₂ (Nd:YAG) powders were prepared by the Pechini method in the temperature range of 800 to 1400 °C. The pure garnet phase of the obtained materials was confirmed by XRD studies. The size of the grains was controlled by the annealing temperature of the samples. Their morphologies were investigated by TEM and porosity measurements (BET). The effect of annealing temperature on the morphology and luminescence properties of Nd:YAG nanocrystallites was studied, and the results were compared to the properties of a Nd:YAG single crystal. A significant enhancement of the ⁴F_3/2→⁴I_9/2/⁴F_3/2→⁴I_11/2 intensity ratio with decreasing grain size was observed. It was found that the decay times of the Nd³⁺ luminescence depends on the specific surface and is significantly longer for well crystallized nanocrystalline grains than for single crystals having the same concentration of Nd³⁺ ions. The role of crystallinity and specific surface on the radiative processes is analyzed. PACS 78.55.-m; 78.20.Ci; 78.67.Bf; 78.68.+m     

Sensitizer-dependent up-conversion of Ho<Superscript>3+</Superscript> in nanocrystalline Y<Subscript>2</Subscript>O<Subscript>3</Subscript>

Ho³⁺–Yb³⁺ co-doped Y₂O₃ nanocrystals were synthesized by firing hydroxy carbonate precursors. Yb³⁺-concentration-dependent up-conversion properties of Ho³⁺ in Y₂O₃ nanocrystals have been investigated. The relative intensity of up-converted red emission increases more quickly than that of the green and the near-infrared ones with the enhancement of the concentration of Yb³⁺. It is believed that the energy process ⁵ S ₂ (⁵F₄) (Ho) + ⁵ I ₇ (Ho) →⁵ I ₆ (Ho)+⁵ F ₅ (Ho) plays an important role in the population of the ⁵ F ₅ level of Ho³⁺. The result indicates that the intensity ratio of the green emission to the red one can be tuned by changing the sensitizer concentration. PACS 78.55.-m     

Electron paramagnetic resonance of Ce<Superscript>3+</Superscript> and Nd<Superscript>3+</Superscript> impurity ions in YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6.13</Subscript>

The electron paramagnetic resonance (EPR) spectra of Ce³⁺ and Nd³⁺ impurity ions in unoriented powders of the YBa₂Cu₃O_6.13 compound are observed and interpreted for the first time. It is demonstrated that, upon long-term storage of the samples at room temperature, the EPR signals of these ions are masked by the spectral line (with the g factor of approximately 2) associated with the intrinsic magnetic centers due to the significant increase in its intensity.     

Effect of annealing temperature on the structural reorganization of Eu<Superscript>3+</Superscript> optical centers in Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Eu<Subscript>2</Subscript>O<Subscript>3</Subscript>-BiOF gel films

The dependence of the structural reorganization of Eu³⁺ optical centers in Al₂O₃-Eu₂O₃-BiOF films on the annealing temperature has been investigated. It is shown by the methods of crystal field theory and computer simulation that the increase in the annealing temperature from 700 to 1100 °C leads to removal of bismuth from Eu-O-Bi complex centers with the C _3V symmetry in the Al₂O₃ structure and the change in symmetry from D ₃ to O _h for a large fraction of EuAlO₃ centers.