CATALYSIS OF METALLO-PORPHYRINS IN OXIDATION OF P-NITROTOLUENE BY ELECTRO-GENEEATED SUPEROXIDE ION

The oxidation of pnitrotoluene with electro-generated superoxide ion in the presence or absence of metallo-porphyrins FeTPP, MnTPP and CoTPP in DMF was studied by cyclic voltammetry and controlled potential electrolysis, Metallo-porphyrins as catalysts for electroreduction of O_2, they can not only increase yields of p-nitrobensoic acid and selectivities of reaction but also enable the reaction proceed at lower negative potential.     

Kinetic Study of the Electro-Catalytic Oxidation of Hydrazine on Cobalt Hydroxide Modified Glassy Carbon Electrode

Electrocatalytic oxidation of hydrazine was investigated on a cobalt hydroxide modified glassy carbon (CHM-GC) electrode in alkaline solution. The process of oxidation involved and its kinetics were established by using cyclic voltammetry, chronoamperometry techniques as well as steady state polarization measurements. In cyclic voltammetry (CV) studies, in the presence of hydrazine the peak current increase of the oxidation of cobalt hydroxide is followed by a decrease in the corresponding cathodic current. This indicates that hydrazine is oxidized on the redox mediator that is immobilized on the electrode surface via an electrocatalytic mechanism. A mechanism based on the electrochemical generation of Co(IV) active sites and their subsequent consumption by the hydrazine in question was also investigated.     

银掺杂聚(2-氨基二苯胺)修饰碳糊电极作为一种简单有效的电催化剂用于甲醛氧化（英文）

This work describes the promising activity of silver nanoparticles on the surface of a poly(2‐amino diphenylamine) modified carbon paste electrode(CPE) towards formaldehyde oxidation. Electro‐deposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2‐aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemi‐cally deposited on the surface of the electrode. The electrochemical and morphological characteris‐tics of the modified electrode were investigated. The electro‐oxidation of formaldehyde on the sur‐face of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solu‐tion of 0.1 mol/L Na OH. The electro‐oxidation onset potential was found to be around-0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocat‐alytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formal‐dehyde in alkaline media was calculated to be 0.47 × 10–6 cm2/s using chronoamperometry.     

以方沸石负载Ni(Ⅱ)催化剂修饰的电极电氧化甲醇(英文)

There is a high overvoltage in the oxidation of methanol in fuel cells,and so modified electrodes are used to decrease it.A modified electrode that used Ni(II) loaded analcime zeolite to catalyze the electrooxidation of methanol in alkaline solution was proposed.Analcime zeolite was synthesized by hydrothermal synthesis,and Ni(II) ions were incorporated into the analcime structure,which was then mixed with carbon paste to prepare modified electrode.The electrocatalytic oxidation of methanol on the surface of the modified electrode in alkaline solution was investigated by cyclic voltammetry and chronoamperometry.The effects of the scan rate of the potential,concentration of methanol,and amount of zeolite were investigated.The rate constant for the catalytic reaction of methanol was 6 × 103 cm3 mol-1 s-1 from measurements using chronoamperometry.The proposed electrode significantly improved the electron transfer rate and decreased the overpotential for methanol oxidation.     

Determination of Metamizole Sodium by Cyclic Voltammetry Under Microwave Activation

<正>Microwave radiation was applied to the detection of metamizoie sodium by cyclic voltammetry.The electrochemical characteristics of metamizoie sodium were studied by cyclic voltammetry at GC electrode under microwave radiation and a considerable current enhancement was observed for metamizoie sodium in aqueous 0.05 mol/L H_2SO_4.Under the optional conditions,metamizoie sodium was determined in the absence and presence of microwave activation.In the absence of microwave activation cyclic voltammogram of metamizoie sodium shows good linear relationship in a concentration range of 8.0×10~(-5)—1.0×10~(-3) mol/L in aqueous 0.05 mol/L H_2SO_4 with a detection limit of 6.75×10~(-6) mol/L(S/N=3) and the equation of linear regression is I_p=12.973c-0.1905(R~2=0.9996,n=6);in the presence of 80 W microwave activation cyclic voltammogram of metamizoie sodiumin shows good linear relationship in a concentration range of 4.0×10~(-5)—1.0×10~(-3) mol/L in aqueous 0.05 mol/L H_2SO_4 with a detection limit of 4.41×10~(-6)mol/L(S/N=3) and the equation of linear regression is I_p=25.107c-0.1193(R~2=0.9973,n=7).The current in the presence of 80 W microwave activation increases to about 2 orders of magnitude compared with that in the absence of microwave activation.The proposed method in the presence of microwave activation showed high selectivity and sensitivity,and the sampling of the disposal method is simple.The method was verified by the determination of Metamizoie Sodium tablet with satisfactory results.     

基于纳米结构的电化学传感器用于伏安法测定苄丝肼、尿酸和叶酸(英文)

A carbon paste electrode modified with carbon nanotubes and ferrocene was fabricated.An electrochemical study of the modified electrode and an investigation into its efficiency for the electrocatalytic oxidation of benserazide,uric acid and folic acid were undertaken.The electrode was also used to study the electrocatalytic oxidation of benserazide using cyclic voltammetry,chronoamperometry,and square wave voltammetry(SWV).We found that the oxidation of benserazide at the surface of the modified electrode occurs at a potential about 285 mV lower than that of unmodified carbon paste electrode.SWV gave a linear dynamic range from 8.0×10-7 to 7.0×10 4 mol/L.The detection limit was 1.0×10-7 mol/L for benserazide.This modified electrode was used for the determination of benserazide,uric acid,and folic acid in an urine sample.     

碱性介质中多孔纳米结构镍/钯-镍电极上甲醇电氧化反应(英文)

A nanostructured Ni/Pd-Ni catalyst with high activity for methanol oxidation in alkaline solution was prepared by electrodeposition followed by galvanic replacement, that is, electrodeposition of Ni-Zn on a Ni coating with subsequent replacement of the Zn by Pd at the open circuit potential in a Pd-containing alkaline solution. The surface morphology and composition of the coatings were examined by energy dispersive X-ray spectroscopy and scanning electron microscopy. The Ni/Pd-Ni coatings were porous and were composed of discrete Pd nanoparticles of about 58 nm. The electrocatalytic activity of the Ni/Pd-Ni electrodes for the oxidation of methanol was examined by cyclic voltammetry and electrochemical impedance spectroscopy. The onset potentials for methanol oxidation on Ni/Pd-Ni were 0.077 V and 0.884 V, which were lower than those for flat Pd and smooth Ni electrodes, respectively. The anodic peak current densities of these electrodes were 4.33 and 8.34 times higher than those of flat Pd (58.4 mA/cm2 vs 13.47 mA/cm2) and smooth Ni (58.4 mA/cm2 vs 7 mA/cm2). The nanostructured Ni/Pd-Ni electrode is a promising catalyst for methanol oxidation in alkaline media for fuel cell application.     

Kinetic spectrophotometric determination of bromide in clidinium-c drug

A simple,rapid and sensitive method has been described for the determination of the trace amounts of bromide.The method is based on the catalytic effect of bromide ion on the oxidation of methylene blue by bromate in sulfuric acid media.The reaction is monitored spectrophotometrically by measuring the decrease in the absorbance of methylene blue at 665 nm. Bromide was determined in the range of 0.05-1.90μg/mL with the detection limit of 0.03μg/mL.The relative standard deviations of five replicate determinations of 0.20 and 10.0μg/mL of bromide were 2.4%and 1.8%,respectively.The influence of potential interfering ions and substances was studied.The method is applied to the analysis of bromide in clidinium-c tablet as a real sample.     

The detection of bergenin based on the gold nanoparticles/chitosan/reduced graphene oxide modified electrodeEI北大核心CSCD

Gold nanoparticles (AuNPs)/chitosan (CS)/reduced graphene oxide (RGO) modified electrode was prepared. The electrochemical behaviors of bergenin on this modified electrode was investigated by cyclic voltammetry. The results showed that the proposed electrode exhibited an obvious electrocatalytic ability to the oxidation of bergenin. The differential pulse voltammetry was employed to detect bergenin in 0.1 mol/L phosphate buffer solution (pH 6.0). A good linear relationship between the oxidation peak current and the concentration of bergenin was found in the range of 2.0×10-7-1.2×10-6 mol/L with the detection limit of 6.0×10-8 mol/L (S/N=3).The prepared electrode had good anti-interference ability and potential application in the actual detection of bergenin. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

A selective voltammetric detection for dopamine using poly (gallic acid) film modified electrode

<正>The electrochemistry behavior of dopamine was investigated by cyclic voltammetry and differential pulse voltammetry at a poly (gallic acid) film modified glassy carbon electrode.Two electrons and two protons participated in the diffusion-controlled electrocatalytic oxidation of dopamine with a diffusion coefficient of 2.186×10~(-5) cm~2/s.The interference of ascorbic acid with the determination of dopamine could be efficiently eliminated.This work provided a simple approach to selectively and sensitively detect dopamine in the presence of high concentration of ascorbic acid.     

辛可宁修饰碳糊电极的应用研究——铋的阳极溶出伏安法测定

报道了利用辛可宁修饰碳糊电极测定铋的方法,在1mol/LH2SO4溶液中,通过在－1.00V电位下富集Bi3＋后,在－0.20～＋0.15V电位范围内作阳极溶出伏安法测定。在－0.022V处有一灵敏的氧化峰,峰电流与Bi     

多壁碳纳米管负载氢氧化铁纳米胶粒修饰玻碳电极固相微萃取及电化学检测三氯生

采用多壁碳纳米管负载氢氧化铁纳米胶粒修饰的玻碳电极对三氯生进行固相微萃取富集,其萃取过程符合一级动力学方程和Temkin吸附等温方程。循环伏安法表明三氯生在0.558 V处有一不可逆的氧化峰,pH值与氧化峰电位呈良好的线性关系,表明三氯生的氧化过程为1个电子伴随着1个质子的反应。氧化峰电流随扫速增加而线性增加,为吸附控制反应,氧化峰电流与三氯生浓度的对数在3.333×10~(-6)~3.333×10~(-4)mol/L范围内呈线性关系,检出限达3.333×10~(-6)mol/L。该方法的重现性及选择性好,已用于洗手液中三氯生的检测。以MOPAC2012软件提供的PM7半经验分子轨道方法,在设计的三氯生与氢氧化铁纳米胶粒形成的络合物分子簇模型上进行半经验分子轨道计算,热力学及前线轨道相关系数的计算结果表明:形成的三氯生络合物的ΔG0,证明形成了稳定的三氯生络合物;且三氯生络合物形成过程中发生了电子转移。     

纳米二氧化铈修饰碳糊电极线性扫描伏安法测定苯酚

在0.01mol.L-1硼砂溶液(pH 9.18)中,用纳米二氧化铈修饰碳糊电极作为工作电极,线性扫描伏安法测定苯酚。伏安图上出现一灵敏的氧化峰,其峰电位为+0.56V(vs.SCE),峰电流与苯酚的浓度在1.0×10-7～2.0×10-4 mol.L-1范围内呈线性关系,检出限(3s/k)为5.0×10-8 mol.L-1。富集时间为30s,同时采用线性扫描伏安法研究苯酚在纳米二氧化铈修饰碳糊电极上的氧化还原反应,结果表明此电极反应为一不可逆的吸附过程。     

盐酸吡哆辛在聚溴甲酚绿修饰电极的电化学特性

应用循环伏安法、线性电位扫描法研究盐酸吡哆辛(VB6)在聚溴甲酚绿修饰电极上的电化学特性.在pH=4 HAc-NaAc缓冲溶液,0.7~1.2 V电位区间,盐酸吡哆辛在聚溴甲酚绿电极有一不可逆氧化峰(0.978 V),转移电子数n为1,质子数m为1,传递系数α为0.37.VB6氧化峰电流与其浓度1×10-3~2×10-5mol/L范围内呈线性关系,相关系数0.9967,样品加标平均回收率为100.06%,检出下限为2×10-6mol/L.     

Studies on the Electrochemical Behavior of Bleomycin at a Co/GC Ion Implantation Modified Electrode and Its Application

In a 0. 10 mol/L HAc-NaAc buffer solution (pH = 4. 59), a sensitive reduction peak of bleomycin was observed by linear sweep voltammetry at a Co/GC ion implantation modified electrode. The peak potential was-0. 73 V(iw. SCE). The peak current was proportional to the concentration of bleomycin over the range of 5.0 × 10-8-1.0× 10-6 and 1.0× 10-6-1. 0 × 10-5 mol/L with a detection limit of 2.0 × 10-8 mol/L. The electrochemical behavior of the reduction peak of bleomycin at the Co/GC modified electrode was studied by linear sweep and cyclic voltammetry and applied to the determination of bleomycin in urine. This method is simple, rapid and reliable. The reduction process is quasi-reversible. The experiments of AES and XPS showed that Co was surely implanted into the surface of GCE and the depth distribution of Co was in good agreement with Gooses normal distribution; the implanted Co at GCE improved the electrocatalytic activity.     

辣根过氧化酶在磁性纳米修饰的离子注入电极上的电化学和电催化行为

辣根过氧化酶(HRP)在Co/NH2/ITO离子注入电极上有一对良好的氧化还原峰,峰电位分别为Epc=-0.2 V,Epa=-0.01 V(vsAg/AgCl)。该修饰电极对H2O2具有催化作用,可以用作H2O2的生物传感器,峰电流与H2O2的浓度分别在1.0×10-10~2.0×10-8mol/L和2.0×10-8~1.0×10-7mol/L范围内呈线性关系,线性回归方程分别为Ip(mA)=2.2986+0.06632c(nmol/L)和Ip(mA)=3.5788+7.3053E-4c(nmol/L),相关系数分别为0.9972和0.9688。检出限为1.0×10-10mol/L。     

纳米氧化铁修饰玻碳电极检测痕量镉离子

制备了一种纳米氧化铁修饰玻碳电极,并研究了镉离子在该修饰电极上的溶出伏安行为。结果表明,纳米氧化铁颗粒能有效促进镉离子的溶出伏安响应。在pH 6.0的磷酸缓冲溶液中,镉离子能有效吸附在纳米氧化铁表面并在-1.0 V时被还原。被还原的镉在正向扫描过程中可以重新氧化,并在-0.85 V处出现一明显的溶出伏安氧化峰。该峰电流随镉离子浓度的增大而增大,可用于对镉离子的检测。在最佳检测条件(pH 6.0,富集时间350 s,富集电位-1.0 V)下,镉离子的响应电流与其浓度在6.0×10-10～1.0×10-8mol/L以及1.0×10-8～1.0×10-5 mol/L范围内呈良好线性,检出限(S/N=3)为1.0×10-10 mol/L。干扰实验结果表明,一些常见的阳离子以及阴离子对镉离子的检测无明显干扰。将该方法用于实际样品的检测,回收率良好。     

用银-色氨酸复合膜修饰玻碳电极循环伏安法测定去甲肾上腺素

在含有1.0mmol.L-1硝酸银、5.58×10-2 mol.L-1色氨酸的溶液中,于-0.8～1.8V(vs.Ag/AgCl)电位下,在玻碳电极表面电沉积一层银-色氨酸复合膜,制得银-色氨酸复合膜修饰玻碳电极(Ag-TRY/GCE)。采用扫描电镜对电极表面的性能进行表征,循环伏安法对其电化学性能进行研究。试验发现:在pH 6.0磷酸盐缓冲溶液中,去甲肾上腺素(NE)在修饰电极出现一对明显的氧化还原峰,氧化峰电位为0.306V,还原峰电位为0.368V,提出了用循环伏安法测定NE的方法。在试验条件下,氧化峰电流与去甲肾上腺素浓度在3.4×10-7～8.3×10-6 mol.L-1和8.3×10-6～1.1×10-4 mol.L-1两段范围内呈线性关系,检出限(3S/N)为4.3×10-8 mol.L-1。修饰电极用于药物中去甲肾上腺素的测定,加标回收率在95.6%～99.4%之间。     

Mn2+浓度对钒液流电池正极液的电化学性能影响

电解液中金属离子会影响钒液流电池的电化学性能。本文采用循环伏安法和电化学阻抗谱研究了正极液中Mn2+浓度对V髨/V(Ⅳ)电对的氧化还原过程影响规律,发现Mn2+在正极液中没有发生副反应,但严重影响V髨/V(Ⅳ)的反应活性、电极反应可逆性、离子扩散与电荷转移反应等电化学性能。循环伏安测试结果表明Mn2+浓度为0.04-0.13 g.L-1时,V髨/V(Ⅳ)电对电极反应可逆性和反应活性较高,钒离子扩散系数由参照溶液中的8.89×10-7-1.098×10-6增大至1.302×10-6-1.800×10-6 cm2.s-1,提高了-60%;电化学阻抗测试结果表明Mn2+浓度为0-0.04 g.L-1时,V髨/V(Ⅳ)电对电极反应阻抗和界面阻抗均较参照溶液中的增加不明显,但当Mn2+浓度增至0.07 g.L-1时,上述阻抗值较参照溶液增大了25%-28%。基于二者结果,Mn2+对电极反应有不同程度的负面影响,但是适当的Mn2+浓度有利于钒离子的扩散。     

吡柔比星的伏安行为及其应用

吡柔比星在 0 .1 mol/L HAc- Na Ac缓冲溶液 (p H4.3)中 ,出现一灵敏的示波极谱导数还原峰 ,峰电位为 - 0 .39V(vs.SCE) ,峰电流与吡柔比星浓度在 2 .0× 1 0 -7～ 4.0× 1 0 -6mol/L范围内成正比。检出限为 1 .0× 1 0 -8mol/L。用于病人尿样的测定。用线性扫描和循环伏安法研究体系的性质。体系属具有吸附性的可逆过程。