Radiochemical determination of 90Sr and 86Sr in soil

Summary A modified HCl-leach method for the radiochemical ⁹⁰Sr and ⁸⁹Sr determination in soil has been developed. The sample is leached by HCl in the presence of the Sr-carrier. Then bi- and trivalent ions are separated by a combination of complexation and ion exchange. The separation of strontium and calcium is performed by fuming nitric acid. After further purification, strontium carbonate is precipitated and the activity of ⁹⁰Sr and ⁸⁹Sr is measured. ⁹⁰Sr determined by the isolation of ⁹⁰Y and by measuring its activity. The ⁹⁰Sr and ⁸⁹Sr content in soil is calculated from the measured activities of yttrium oxide and strontium carbonate by considering the counting efficiencies for ⁹⁰Y, ⁹⁰Sr and ⁸⁹Sr beta rays, the chemical yields of strontium and yttrium and the time of ⁹⁰Y growth from ⁹⁰Sr.

---

Radiochemische Bestimmung von ⁹⁰Sr und ⁸⁹Sr in Boden

Zusammenfassung Eine modifizierte Auslaugungsmethode für die radiochemische Bestimmung von ⁹⁰Sr und ⁸⁹Sr im Boden wurde entwickelt. Die Probe wird in HCl in Gegenwart des Sr-Trägers ausgelaugt und die zwei- und dreiwertigen Ionen dann durch eine Kombination von Komplexierung und Ionenaustausch getrennt. Die Strontiumtrennung von Calcium erfolgt mit rauchender Salpetersäure. Nach weiterer Reinigung wird SrCO₃ gefällt und die Aktivität von ⁹⁰Sr und ⁸⁹Sr bestimmt. ⁹⁰Sr wird durch Isolierung und Zählung von ⁹⁰Y ermittelt. Der ⁹⁰Sr- und ⁸⁹-Sr-Gehalt im Boden wird aus der Aktivität von Y₂O₃ und SrCO₃ unter Berücksichtigung der Zählausbeute für ⁹⁰Y-, ⁹⁰Sr- und ⁸⁹-Sr-beta-Strahlen, aus der gravimetrischen Bestimmung von Strontium und Yttrium und aus der Zeit der ⁹⁰Y-Entstehung aus ⁹⁰Sr bestimmt.

     

Radiochemical analysis of90Sr in milk,soil and plants by solvent extraction

A universal and fast method of⁹⁰Sr determination in environmental matrices (raw and dried milk, plants, soils) has been elaborated. Solvent extraction method of daughter⁹⁰Y by tributyl phosphate was used. The method of strontium determination is compatible with determination of other transuranic elements (americium, plutonium) and there is no need to check the chemical yield of strontium.     

Studies on soil samples mineralization conditions preceding the determination of 90Sr

Some results of the extraction of strontium and yttrium from soil samples by concentrated nitric acid are described. The concentration of Sr and Y in the solid was determined by XRF method. The results obtained allowed to elaborate the conditions of acid leaching and to propose an analytical procedure for the determination of ⁹⁰Sr in samples without their total dissolution.     

Determination of 90Sr in soil, grass and cereals

⁹⁰Sr was measured in environmental samples in Upper Austria in the year 2005. After the nuclear weapon tests the average deposition of ⁹⁰Sr in Austria amounted to 3.3 kBq/m². In 1986 the average deposition was 0.9 kBq/m² [1]. To assess the actual condition in soil, grass and cereals ⁹⁰Sr was measured in these samples. For all samples oxalate precipitation was conducted and strontium specific columns (Eichrom Industries, Inc.) were used. The calcium concentration in these samples was determined to estimate the amount of resin needed for the preparation. For grass and cereal samples columns were packed with the 100–150 μm resin to gain a lower limit of detection LLD below 2 and below 0.1 Bq/kg_{dry matter} respectively. The prepacked 2 mL columns with particle size 100–150 μm were used for soil (LLD below 2 Bq/kg_{dry matter}). After digestion of soil samples, hydroxide precipitation was used as an additional separation step. The ⁹⁰Sr was measured by liquid scintillation counting. For quality control reasons, first the initial strontium concentration in the sample was determined then a strontium carrier solution was added and after the separation steps the chemical recovery was determined by ICP-MS. Thus, no radioactive tracer and just a small amount of the measuring solution were needed. The results are presented and discussed. These results will be used as reference for further ⁹⁰Sr analyses which will be conducted in a 5 year period to detect any radiological impact of the nuclear power plant Temelin on the environment of Austria.     

Combined procedure for the determination of90Sr,241Am and Pu radionuclides in soil samples

A combined procedure for sequential determination of low level activity concentrations of⁹⁰Sr,²⁴¹Am and Pu radionuclides is described. The analysis of -emitters is performed by isotope dilution -spectrometry using²⁴²Pu or²³⁶Pu and²⁴³Am tracers. Strontium-90 is analyzed by liquid scintillation counting using the double energetic windows method. The method combines the well established, procedure for Pu analysis based on anion exchange, the powerful and selective method for Sr isolation based on extraction chromatography using Sr-Spec resin and finally it includes the application of the TRU-Spec column for separation and purification of the Am fraction. The radiochemical procedure was tested using IAEA reference and intercomparison materials. Major parameters of the procedure as well as advantages and drawbacks are discussed in detail.     

Rapid determination of 89Sr and 90Sr in radioactive waste using Sr extraction disk and beta-ray spectrometer

A rapid determination method in which beta-ray spectrometry was combined with solid phase extraction using Sr Rad Disk was developed for the determination of ⁸⁹Sr and ⁹⁰Sr in low-level radioactive waste. Various amounts of ⁸⁹Sr, ⁹⁰Sr, and ⁹⁰Y retained by the Sr Rad Disk was measured by a beta-ray spectrometer, and it was found that both ⁸⁹Sr and ⁹⁰Sr were simultaneously determined with <30% error (2σ) at ⁸⁹Sr/⁹⁰Sr radioactivity ratio of 0.3 to 45. The present method was successfully applied to actual radioactive liquid waste samples arising from nuclear facilities in Japan Atomic Energy Agency. Strontium was simply separated from interfering nuclides such as ¹³⁷Cs and ¹⁵⁴Eu, and matrix components by the Sr Rad Disk, and the results obtained by beta-ray spectrometry was in good agreement with that of the conventional analysis.     

New method for90Sr determination in liquid samples

A method has been developed for measuring⁹⁰Sr activity in liquid samples. After concentrating strontium from the sample by coprecipitation with calcium phosphate, the residue is dissolved in 8N HNO₃ and passed through an extraction chromatographic column (Sr.Spec) containing a new material that selectively retains strontium. This is eluted from the column with 0.05N HNO₃ and counted by liquid scintillation. Measurement is performed using a double window method, that allows a rapid and single determination of⁹⁰Sr.     

The determination and application of 87Sr/86Sr ratio in verifying geographical origin of wheat

As ⁸⁷Sr/⁸⁶Sr ratio plays a significant role in authenticating the geographical origin of foodstuff, it is important to identify where the ⁸⁷Sr/⁸⁶Sr signature in food comes from, and the methods of ⁸⁷Sr/⁸⁶Sr ratio analysis in food and environmental samples. Wheat with three genotypes, soil and groundwater samples were collected from three regions of China during harvest time of 2014. The ⁸⁷Sr/⁸⁶Sr ratios in the samples were determined by thermal ionization mass spectrometer in order to investigate the possible source of ⁸⁷Sr/⁸⁶Sr in wheat, and the concentrations of Rb and Sr in wheat and soils were also detected by inductively coupled plasma mass spectrometry and combined with ⁸⁷Sr/⁸⁶Sr ratio in order to trace the geographical origin of wheat. The ⁸⁷Sr/⁸⁶Sr ratio, the contents Rb and Sr, and Rb/Sr ratio of wheat and soil samples showed significant differences among three regions. The ⁸⁷Sr/⁸⁶Sr ratios and the concentrations of Rb and Sr in soils were higher than those in corresponding wheat. The ⁸⁷Sr/⁸⁶Sr ratio in wheat was identical to that corresponding soil NH₄NO₃ extracts (labile fraction of soil) and groundwater. Wheat uptake more Rb than Sr. 3D distribution of ⁸⁷Sr/⁸⁶Sr, Rb and Sr could identify wheat samples from different regions clearly. The ⁸⁷Sr/⁸⁶Sr ratio of wheat reflects the ⁸⁷Sr/⁸⁶Sr ratio of the associated environment including soil and groundwater. It is expected that the use the parameters of ⁸⁷Sr/⁸⁶Sr ratio, the contents of Rb and Sr will allow to trace geographical origin of wheat. Copyright © 2017 John Wiley & Sons, Ltd.     

A simple radiochemical determination of90Sr in environmental samples

A simple procedure for the determination of⁹⁰Sr in environmental samples is described. The method uses the different solubilities of the oxalates of calcium and strontium in presence of a large excess of calcium. For this reason the method is especially suited for Ca-rich samples, as e.g., bones or soils. However, after addition of supplementary calcium it works equally well for other types of samples. The method was tested by analyzing the IAEA Certified Reference Materials soil, animal bone and algae.     

Simple determination of 90Sr in water in environmental radioactivity survey

Derivatives of dodecahydro-closo-dodecaborate(2-) anion were proposed as boron-rich compounds for boron-neutron capture therapy (BNCT) of malignant tumours. Labeling of such tumour-targeting compounds with radioisotopes would facilitate the investigation of their pharmacokinetics and help to optimize patient treatment protocols. Earlier, we reported the feasibility of labeling of closo-dodecaborate(2-) by isotopic exchange in molten acetamide. In this study, the feasibility of low-temperature isotopic exchange in the system [¹²⁵I]iodide - bis(triethylammonium) undecahydro-12-iodo-closo-dodecaborate was investigated. Our attempts to perform the exchange in solvents such as methylene chloride, acetone and acetonitrile in the presence of phase-transfer catalysts were unsuccessful. However, copper mediated exchange in aqueous media was possible. Isotopic exchange of triethylammonium undecahydro-12-iodo-closo-dodecaborate provided a 90-95% labeling yield after heating for three and half hours at 100 °C. This revised version was published online in July 2006 with corrections to the Cover Date.     

90Sr/90Y determination in milk by Cherenkov radiation after microwave digestion

Journal of Radioanalytical and Nuclear Chemistry - A separation procedure was developed and implemented for the isolation of gold (Au) and platinum (Pt) radionuclides from deuteron irradiated Pt...     

Radiochemical determination of antimony

A radioanalytical method based on substoichiometric principles has been developed for the extraction and determination of antimony/III/ with 1-/2-pyridylazo/-2-naphthol /PAN/. Antimony/III/ forms a red complex with PAN in the presence of I^– or Br^–, which is extractable into benzene from sulphuric acid media.     

Rapid determination of90Sr by Compton suppression gamma-ray spectrometry

This work presents a low-level background gamma spectrometry system capable of achieving rapid determination of⁹⁰Sr without chemical separation, in a soil sample when the⁹⁰Sr to -ray emitting nuclide concentration ratio exceeds 10. The system consists of a highly efficient HPGe central detector operated in coincidence or anticoincidence with a NaI(Tl) guard detector and a NaI(Tl) backscatter detector. Experimental results indicate that the bremstrahlung radiation from a pure -emitter can be distinguished with respect to the differences in normal and coincidence spectra. The⁹⁰Sr activity can be directly detemined in the sample in less than 1 hour with a minimum detectable concentration (MDC) estimated at 0.002 Bq·g^–1 for a sample containing no appreciable -ray nuclides or other high energy, -emitting nuclides. In actual measurement, a 0.06 Bq·g^–1 MDC for contaminated soils is achieved.     

Rapid determination of 90Sr/90Y in water samples by liquid scintillation and Cherenkov counting

Strontium-90 (⁹⁰Sr) is a ubiquitous contaminant at nuclear facilities, found at high concentrations in spent nuclear fuel and radioactive waste. Due to its long half-life and ability to be transported in groundwater, an accurate method for measuring ⁹⁰Sr in water samples is critical to the monitoring program of any nuclear facility. To address this need, a rapid procedure for sequential separation of Sr/Y was developed and tested in groundwater samples collected from an area of riverbed affected by a ⁹⁰Sr groundwater plume. Sixteen samples, plus spike and water blanks, were analyzed. Five different measurements were performed to determine the ⁹⁰Sr and yttrium-90 (⁹⁰Y) activities in the samples: direct triple-to-double-coincidence ratio (TDCR) Cherenkov counting of ⁹⁰Y, liquid scintillation (LS) counting for ⁹⁰Sr following radiochemical separation, LS counting for ⁹⁰Y following radiochemical separation, Cherenkov counting for ⁹⁰Y following radiochemical separation and LS counting of the Sr samples for ⁹⁰Y in-growth. The counting was done using a low-level Hidex 300SL TDCR counter. Each measurement method was compared for accuracy, sensitivity and efficiency. The results following Cherenkov counting and radiochemical separation were in very good agreement with one another.     

Inter-laboratory exercise with an aim to compare methods for 90Sr and 239,240Pu determination in environmental soil samples

In order to deliver reliable results for a multitude of different scenarios, e.g. emergency preparedness, environmental monitoring, nuclear decommissioning and waste management, there is a constant process of method development in the field of radioanalytical chemistry. This work presents the results of a method comparison exercise aimed at quantifying ⁹⁰Sr and ^239,240Pu in environmental soil samples, with the intention of evaluating the performance and applicability of different methods. From the methods examined in this work, recommendations are given in order to find a radioanalytical measurement procedure, for ⁹⁰Sr and ^239,240Pu analysis, which is fit-for-purpose for a particular scenario.

     

Determination of90Sr in soil and sediment using lithium-borate fusion and extraction chromatography

A rapid and reliable method for determination of⁹⁰Sr in soil and sediment has been developed. The method is based on lithium-borate fusion and extraction chromatography with a Sr-resin. The samples can be dissolved and separated for Sr in approximately 5 hours of which the fusion and dissolution requires 20 minutes. The method has been applied to four reference materials, two soils and two sediments, and the results agree well with the recommended values. The mean recovery of Sr was 71%.     

Separation of Sr in combination of ion exchange and Sr resin with alcohol-nitric acid solution and rapid determination of <Superscript>90</Superscript>Sr in wine and soil samples

This paper describes the procedures of isolating strontium from wine and soil samples which enable creating of procedure for rapid determination of ⁹⁰Sr. The method of determination of ⁹⁰Sr includes binding of Sr on the cationic exchanger IR-120 from the sample and simultaneous elution from the cation column and binding on the Sr column, separation of Sr on Sr resin with HNO₃ even in presence of alcohols and subsequent Cherenkov counting. Sr can be efficiently bind on Sr resin and separated from the other elements with lower acid concentrations in the presence of a low portion of alcohol, or even from a wine sample without the loss of Sr resin capacity. The binding strength of Sr on Sr resin decreases with the rising of HNO₃ concentration (1–5 M) in the presence of 13% of ethanol or methanol, and with the rising of the alcohol portion in constant concentration of HNO₃. Application of cation exchanger for Sr binding in phase of sample preparation decreases Sr column loading and improve Sr recovery. The method allows the determination of ⁹⁰Sr activities in wine and soil sample lower than 10 mBq in reasonable time.     

Application of neutron activation analysis in chemical yield determination for89Sr and90Sr separation of environmental samples

For⁸⁹Sr and⁹⁰Sr determination in grass samples neutron activation analysis was employed as an advantageous method for yield measurements during the separation process. From the activity ratio found conclusions on the source of radioactivity are possible taking into consideration the dependence on reactor operating time.     

Radiochemical determination of technetium-99

The radiochemistry of technetium-99 is reviewed and the different measurement techniques are compared. Experimental results on sorption of technetium on two different types of ion exchange resins using^99mTc and^95mTc as chemical yield tracers are presented. Spectra calibrations of liquid scintillation counter using^95mTc as chemical yield tracer of⁹⁹Tc are discussed.