Soil SO-1 reference material for trace analysis

Summary The preparation of soil SO-1 reference material is described as well as an evaluation of the results provided by 30 laboratories for 41 elements, including outlier rejection step by four concurrent tests. The influence of different chemical pretreatment methods preceding various instrumental analytical techniques is also discussed. Based on the numbers of outliers, confidence limits and numbers of different analytical methods used for a given element some criteria for the classification of the results are proposed.

---

Referenzmaterial Soil SO-1 für die Spurenanalyse

     

Human albumin as a reference material for trace elements

Summary An investigation through interlaboratory comparison using different analytical techniques has been carried out in order to assess the suitability of a plasma protein solution as a source for a trace element reference material in clinical analysis. Reasonable agreement was obtained for a number of elements from the range studied: Al, Ba, Cr, Cu, Fe, Mg, Mn, Mo, Ni, Se, Sr, V and Zn. The techniques used included flame and furnace atomic absorption spectrometry (FAAS and ETA-AAS), furnace atomic emission spectrometry (ETA-AES), inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS), and simultaneous multi-element atomic absorption spectrometry (SIMAAC). Results indicated that this plasma protein solution may prove useful as a source for a reference material covering trace element levels outwith the range found in normal human plasma.

---

Humanalbumin als Referenzmaterial für Spurenelemente

     

New human hair certified reference material for methylmercury and trace elements

 A new human hair certified reference material (NIES CRM No. 13) for mercury speciation and trace element analysis was prepared at the National Institute for Environmental Studies (NIES), Environmental Agency of Japan. Scalp hair from Japanese males, which is identical with the original material for the previous human hair CRM (NIES CRM No. 5), was used. Special attention was paid to reduce contamination from a grinding vessel during the preparation procedure. A newly-prepared ceramic/Teflon disc mill was used for cryogenic grinding of the hair. 1,000 bottles (3 g each) were produced after sieving and blending of the hair powder. Certified values for total mercury and methylmercury, as well as other trace elements of toxicological and nutritional significance (antimony, cadmium, copper, lead, selenium, and zinc), were determined based on analyses from extensive collaborations. Reference values for 12 elements (aluminium, arsenic, barium, calcium, cobalt, iron, magnesium, manganese, silver, sodium, sulfur and vanadium) were also given. Received: 8 February 1996/Accepted: 4 April 1996     

New human hair certified reference material for methylmercury and trace elements

A new human hair certified reference material (NIES CRM No. 13) for mercury speciation and trace element analysis was prepared at the National Institute for Environmental Studies (NIES), Environmental Agency of Japan. Scalp hair from Japanese males, which is identical with the original material for the previous human hair CRM (NIES CRM No. 5), was used. Special attention was paid to reduce contamination from a grinding vessel during the preparation procedure. A newly-prepared ceramic/Teflon disc mill was used for cryogenic grinding of the hair. 1, 000 bottles (3 g each) were produced after sieving and blending of the hair powder. Certified values for total mercury and methylmercury, as well as other trace elements of toxicological and nutritional significance (antimony, cadmium, copper, lead, selenium, and zinc), were determined based on analyses from extensive collaborations. Reference values for 12 elements (aluminium, arsenic, barium, calcium, cobalt, iron, magnesium, manganese, silver, sodium, sulfur and vanadium) were also given.     

Honey as a candidate reference material for trace elements.

The feasibility of producing and certifying new certified reference materials (CRMs) for trace elements in honey was investigated. Preliminary steps for preparation of candidate materials are performed at the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission (EC-JRC-IRMM). Two different types of honey, Acacia and Eucalyptus, were tested for determination of 10 trace elements. To each type of honey was added a given amount of high purity deionized water to obtain aqueous solutions with an acceptable degree of homogeneity which would require only minimal manipulation before analysis. Average values obtained for the trace elements by means of inductively coupled plasma-based techniques were as follows (in microg/ kg +/- SD): Acacia honey, As, 1.10+/-0.20; Cd, 0.328+/-0.035; Cr, 1.90+/-0.22; Cu, 67.0+/-5; Fe, 215+/-30; Hg, < 0.75; Mn, 82.1+/-6.2; Ni, 21.0 3.0; Pb, 2.30+/-0.25; Se, 9.10+/-1.2; Zn, 167+/-22; Eucalyptus honey, As, 5.99+/-0.10; Cd, 0.592+/-0.074; Cr, 1.50+/-0.07; Cu, 219 24; Fe, 1008+/-114; Hg, <0.75; Mn, 1009+/-51; Ni, 11.3+/-1.5; Pb, 5.00+/-0.40; Se, 5.60+/-0.91; Zn, 791+/-91. When these 2 pilot materials are ready, the certification project will be launched in full compliance with current rules set by EC-JRC-IRMM. If the project is successful, the new CRMs will be put primarily at the disposal of the National Reference Laboratories for trace elements.     

Characterization of a potato reference material for major, minor and trace elements

Summary A potato reference material (RM) was prepared for the analytical quality control program to be employed by the Sub-network on Trace Elements in Food of the FAO European Co-operative Network on Trace Elements. Approximately 50 kg of commercially available potato granules prepared from baked, mashed and roller-dried potatoes, containing 2.8% ash and 3 mg/kg added butylhydroxyanisole was purchased. The granules were carefully homogenised in large glass cylinders followed by division into 50 g portions into numbered acid-washed bottles. The bottled material was tested for homogeneity by taking ten bottles throughout the bottling line and determining by validated atomic absorption spectrometric methods 1.0 g samples for seven mineral elements. Homogeneity for Mg, Ca, Zn, Fe, Mo, Ni and Cd was better than 5%. An international network on experienced, high-quality reference laboratories was established to conduct an interlaboratory comparison study on the determination of 14 mineral elements in the RM. A total of seven methods based on independent analytical principles were employed by the reference laboratories. After excluding outlying analytical results, the criteria defined by the IAEA were used for classification of the overall medians obtained through the interlaboratory comparison study. The relative standard deviations for the 95% confidence limits of the medians were as follows: P=4.2%, K=0.7%, Na=4.7%, Ca=5.5%, Mg=2.4%, Fe=9.3%, Mn=4.0%, Zn=3.6%, Cu=4.7%, Mo=23%, Ni=22%, Cr=19%, Pb=11% and Cd=4.6%. With the exception of Cr, all of the recommended concentration values obtained for the above indicated elements fell into category A, i.e. values recommended with a high degree of confidence according to the classification criteria of the IAEA. The present RM is the only certified potato RM currently available for mineral elements.

---

Charakterisierung eines Kartoffel-Referenzmaterials für Haupt-, Neben- und Spurenelemente

     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Preparation and certification of JAC river water reference material for trace element analysis

 The Japan Society for Analytical Chemistry has recently issued a river water-certified reference material (CRM) for use in the ultratrace analysis of elements in fresh water. The river water CRM consists of a set of two (natural and spiked) 500-ml samples. The natural water is certified for Pb, Cr, As, Cu, Fe, Mn, Zn, B and Al at their sub-μg/l levels, while the spiked water is intended for use in the regulatory analysis of tap water and fresh water. Key words River water · Trace element analysis · Regulatory analysis · Reference materials     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

A new Antarctic certified reference material for trace elements: Adamussium colbecki

The certification of a new reference material for trace elements based on the Antarctic bivalve Adamussium colbecki is reported. This certified reference material (CRM), labelled IRMM 813, was produced in the frame of the Italian National Program for Research in Antarctica (Programma Nazionale di Ricerca in Antartide, PNRA). About 40 kg of the scallop were collected at Terra Nova Bay (Ross Sea). The raw material was freeze-dried, jet-milled and homogenized so as to make it suitable for certification. The elements selected for the certification project were As, Cd, Cu, Cr, Fe, Mn, Ni and Zn. Homogeneity and short- and long-term stability were preliminarily investigated so as to assess the suitability of the freeze-dried mass as a candidate CRM. The candidate material was found to be fit for purpose, thus allowing the following phases of the certification project to be undertaken, in the first place the selection of expert laboratories for the accomplishment of the certification campaign. Eighteen laboratories from twelve countries accepted to participate in the certification project which thus could be successfully completed.     

Collection and preparation of a second generation biological reference material for trace element analysis

The paper describes the collection and preparation of a second generation biological reference material (human blood serum) with trace element levels closely approximating those in real human blood plasma or serum samples.     

Preparation of a reference mussel tissue material for polycyclic aromatic hydrocarbons and trace metals determination

Due to high cost of certified reference materials (CRMs), reference materials (RMs) are preferred to check the method performance in environmental analysis. In this work, a laboratory reference material (LRM) was prepared and characterised to carry out the quality control in monitoring analysis of eight polycyclic aromatic hydrocarbons (PAHs) and nine trace metals in mussel tissue. Mussels were collected in a naturally polluted area. Before the reference material was bottled, the mussel tissue was stabilised by freeze-drying, ground and sieved. For the material characterisation, several statistical tests were applied to check the homogeneity of the analytes in the tissue, and a stability test was performed to study the effect of the storage temperature in the analyte concentration. Other characteristics such as specific density, moisture and lipid contents as well as particle size distribution of the material were determined. Although the LRM had a homogeneous distribution for all PAHs and almost all metals, the stability study showed different results at both storage temperatures studied. For both PAHs and trace metals, the material was suitable to assure the quality control of the analysis.     

Synthesis and characterization of new electroactive polypyrrole-chondroitin sulphate A substrates

Novel composite polypyrrole/chondroitin-4-sulphate films with cation-exchange properties were synthesized by the electrochemical polymerization of pyrrole in the presence of chondroitin-4-sulphate (CSA) sodium salt, acting as dopant anion at neutral pH. The negatively charged biomolecule was found to be permanently entrapped in the polypyrrole (PPy) membrane which resulted, as expected, facilitated in the mass transport by mobile cationic counterions. The porous nature of the substrates was identified as the most influential factor controlling the morphology. The morphology, in turn, affects the interaction between the material surface and the tissues on a cellular level. In this work in vitro analyses of human fibroblast response to polypyrrole/chondroitin-4-sulphate films were performed to focus on the different steps of cell reactions towards defined surface properties.     

Cabbage leaves CL-1 certified reference material for the trace analysis of plant materials

Summary The preparation of cabbage leaves (CL-1) certified reference material and homogenisation procedures are described and relevant data are compiled. In evaluation of the data four concurrent tests (Dixon's, Grubb's, Nalimov's and the test of coefficient of Kurtosis) for outlier rejection at the significance level 0.05 have been applied. As a result it was possible to establish certified concentration values for 10 elements and reference values for 4 elements.

---

Zertifiziertes Referenzmaterial Cabbage Leaves CL-1 für die Spurenanalyse von pflanzlichem Material

     

Assessment of trace metal extraction techniques with reference to aquatic sediments

Summary Different techniques have been employed to determine the extractability of non-residual metals from aquatic sediments. The methods classified as acid extractable, cold extractable and alkaline fusion extractable were compared on the basis of their efficiency in extracting metals responsible for pollution in streams and rivers in the Plateau state of Nigeria. The results show that optimum recovery of any metal depends on the choice of the decomposition procedure. While the cold extractable method showed affinity for most of the metals, copper and tin were optimally recovered by the acid digestion method. Generally, fusion methods gave scant metal recoveries which could be attributted to the low silicate content of the sample and volatilisation losses. In all cases the samples were quantitatively analysed by atomic absorption spectrophotometry and the error due to determination calculated as standard deviation.     

Preparation and analysis of a marine sediment reference material for the determination of trace organic constituents

Summary A new marine sediment Standard Reference Material (SRM) has been prepared and analyzed for the determination of trace organic constituents. SRM 1941, Organics in Marine Sediment, has been certified for concentrations of 11 PAHs using results obtained from gas chromatography (GC) with flame ionization detection, gas chromatography-mass spectrometry, and liquid chromatography with fluorescence detection. Non-certified values for 24 additional PAHs are also reported. GC with electron capture detection was used to provide non-certified concentrations for 15 PCB congeners and 7 chlorinated pesticides. In addition to the organic contaminants, concentrations of 32 major and trace elements were determined using neutron activation analysis, and the sulfur content was also determined using isotope dilution thermal ionization mass spectrometry.     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.