A new method based on low background instrumental neutron activation analysis for major,trace and ultra-trace element determination in atmospheric mineral dust from polar ice cores

Dust found in polar ice core samples present extremely low concentrations, in addition the availability of such samples is usually strictly limited. For these reasons the chemical and physical analysis of polar ice cores is an analytical challenge. In this work a new method based on low background instrumental neutron activation analysis (LB-INAA) for the multi-elemental characterization of the insoluble fraction of dust from polar ice cores is presented. Thanks to an accurate selection of the most proper materials and procedures it was possible to reach unprecedented analytical performances, suitable for ice core analyses. The method was applied to Antarctic ice core samples. Five samples of atmospheric dust (μg size) from ice sections of the Antarctic Talos Dome ice core were prepared and analyzed. A set of 37 elements was quantified, spanning from all the major elements (Na, Mg, Al, Si, K, Ca, Ti, Mn and Fe) to trace ones, including 10 (La, Ce, Nd, Sm, Eu, Tb, Ho, Tm, Yb and Lu) of the 14 natural occurring lanthanides. The detection limits are in the range of 10⁻¹³–10⁻⁶ g, improving previous results of 1–3 orders of magnitude depending on the element; uncertainties lies between 4% and 60%.     

Instrumental neutron activation analysis as a tool for assessing the solubility of soil mineral matter in strong acid

Fifty samples of natural surface soils with high but variable organic matter content were analyzed for 13 elements (Na, Al, K, Sc, V, Cr, Mn, Fe, Co, Zn, Sr, Ba, La) by INAA. The same samples were analyzed for the “total-recoverable” fraction of these elements by ICP-OES after decomposition with 7M HNO₃, and the results are compared. The data are discussed separately for two groups of samples with organic matter contents of respectively >80% and <70%. In the group with < 70 % organic matter the “total-recoverable” fractions show the following sequence (% of total): Co (83)>Mn (77)>La (60)>Fe=Zn (53)>V (33)>Cr (29)>Sc (25)>Al=Ba (17)>Sr (13)>K (5)>Na (2). The results are in good agreement with corresponding literature data for mineral soils in the case of Al, K, Sc, V, Cr, Fe, and La. In the case of Na, Mn, Co, Zn, Sr, and Ba the present surface soils showed significantly higher “total-recoverable” fractions than the previously studied subsoils. Possible reasons for these differences are discussed. INAA remains a convenient reference technique for determination of total concentrations with the rapidly increasing use of strong mineral acids in environmental studies of elements. This revised version was published online in July 2006 with corrections to the Cover Date.     

Non-destructive neutron activation analysis of atmospheric pollutants

Concentration of elements in atmospheric particulate of urban areas has been determined by employing a Ge(Li) detector. In the first part of this study, a single area was selected and samples were collected on millipor filter during three seasons of the year and their results were compared. These results were also compared with the concentration of the same elements reported for other cities. We have concluded that in a dry climate at least two parameters are involved in seasonal changes of trace elements in the atmosphere. They are the rate of wet deposition and reduction of vertical diffusion of airborne particulates.     

Laser ablation inductively coupled plasma mass spectrometry: a new tool for trace element analysis in ice cores

A new method for the detection of trace elements in polar ice cores using laser ablation with subsequent inductively coupled plasma mass spectrometry analysis is described. To enable direct analysis of frozen ice samples a special laser ablation chamber was constructed. Direct analysis reduces the risk of contamination. The defined removal of material from the ice surface by means of a laser beam leads to higher spatial resolution (300-1000 microm) in comparison to investigations with molten ice samples. This is helpful for the detection of element signatures in annual layers of ice cores. The method was applied to the successful determination of traces for the elements Mg, Al, Fe, Zn, Cd, Pb, some rare-earth elements (REE) and minor constituents such as Ca and Na in ice cores. These selected elements serve as tracer elements for certain sources and their element signatures detected in polar ice cores can give hints to climate changes in the past. We report results from measurements of frozen ice samples, the achievable signal intensities, standard deviations and calibration graphs as well as the first signal progression of 205Pb in an 8,000-year-old ice core sample from Greenland. In addition, the first picture of a crater on an ice surface burnt by an IR laser made by cryogenic scanning electron microscopy is presented.     

Neutron activation analysis for identification of African mineral dust transport

A Gent stacked filter unit sampler was used to collect air particulate matter (APM) in separate coarse (PM_2.5–10) and fine (PM_2.5) size fractions, at a sub-urban site in Lisbon, Portugal. The sampling was done during the year 2001 and two daily samples were taken per week. The filters were analyzed for particulate mass by instrumental neutron activation analysis (INAA). The chemical analysis of APM levels and the study of the atmospheric dynamics by back-trajectories showed that most of the PM_2.5 and PM_2.5–10 peaks events were associated with air masses transport from the Saharan desert. High mineral load in ambient particulate matter levels were registered during the Saharan dust outbreaks. The accuracy of INAA to measure Fe, Sc and Sm was evaluated by NIST filter standards, revealing results with an agreement of ± 10%. This method constituted an important tool to identify these events.     

Elemental characterization of mineral supplements by neutron activation analysis

Instrumental neutron activation analysis (INAA) was applied to assess element concentrations in eleven samples of mineral supplements/multivitamins acquired in drugstores and pharmacies in São Paulo city, SP, Brazil. Concentrations of Ca, Co, Cr, Cu, Fe, K, Na, Se and Zn were determined. A comparison was made between the results obtained with the labels of the mineral supplents. Certified reference materials, NIST SRM1400 Bone Ash and NIST SRM 1633b Coal Fly Ash were analyzed for quality control of the analytical results.     

The determination of nickel in air dust by neutron activation analysis

The determination of nickel in atmospheric aerosols, collected on filter paper, is performed by thermal neutron activation analysis using the⁶⁵Ni (T=2.56 h) isotope. Liquid-liquid extraction and anion-exchange are applied in the chemical separation. The absolute sensitivity of the method is ≌0.02 μg Ni. The relative sensitivity is 0.005 μg Ni/m³ if an air sample of about 1000 m³ is used.     

The determination of rhenium in flue dust by neutron activation analysis

Rhenium was determined by radiochemical neutron activation analysis in flue dust samples of complex chemical composition. Two separation techniques were used; distillation from perchloric-hydrochloric acid solution and hydroxide scavenging followed by extraction with tetraphenylarsonium chloride in chloroform. ¹⁸⁶Re and ¹⁸⁸Re were measured with a Ge(Li) low-energy photon detector. Chemical yields were determined by reactivation. For a neutron flux of 5·10¹¹ n cm^-2 s^-1, an irradiation time of 6 h and samples of ca. l g, down to 50 p.p.b. of rhenium could be determined.     

Instrumental neutron activation analysis of dry atmospheric fall-out and rain-water

An automated precipitation sampler and an instrumental neutron activation analysis (i.n.a.a.) method for the determination of some major and trace elements in dry atmospheric fall-out and rain-water are presented. The sampler features a rain detector which makes separate collection of dry atmospheric fall-out and rain-water possible. The sampler is equipped with u.v. lamps in order to avoid algal growth during extended collection periods. After collection, the samples are separated into water-soluble and insoluble fractions. The soluble fraction is preconcentrated before analysis by freeze-drying. The i.n.a.a. method involves the measurement of both short- and long-lived radioactivities so that a total of 35 elements can be determined. The possibility of losses during freezedrying and the accuracy of the i.n.a.a. method were investigated for 7 elements by analysis of a soluble fraction with an independent method, viz. inductively coupled plasma atomic emission spectrometry.     

Local covariance order diffusion-ordered spectroscopy: a powerful tool for mixture analysis

Diffusion-ordered spectroscopy (DOSY) is an important tool in NMR mixture analysis that has found use in most areas of chemistry, including organic synthesis, drug discovery, and supramolecular chemistry. Typically the aim is to disentangle the overlaid, and often overlapped, NMR spectra of individual mixture components and/or to obtain size and interaction information from their respective diffusion coefficients. The most common processing method, high-resolution DOSY, breaks down where component spectra overlap; here multivariate methods can be very effective, but only for small numbers (2-5) of components. In this study, we present a hybrid method, local covariance order DOSY (LOCODOSY), that breaks a spectral data set into suitable windows and analyzes each individually before combining the results. This approach uses a multivariate algorithm (e.g., SCORE or DECRA) to resolve only a small number of components in any given window. Because a small spectral region should contain signals from only a few components, even when the spectrum as a whole contains many more, the total number of resolvable chemical components rises dramatically. It is demonstrated here that complete resolution of component spectra can be achieved for mixtures that are much more complex than could previously be analyzed with DOSY. Thus, LOCODOSY is a powerful, flexible tool for processing NMR diffusion data of complex mixtures.     

Trace element contents in atmospheric suspended particles: inferences from instrumental neutron activation analysis

 This study focuses on the determination of trace element concentrations in total suspended particles by instrumental neutron activation analysis (INAA) in two different areas in Northeastern Spain (a rural area influenced by the emissions of a large coal-fired power station, and the urban and industrial areas of Castellón). Total suspended particles were sampled by means of standard MCV high- and medium-volume captors, using cellulose membrane filters of 0.8 and 0.45 μm pore size. Preliminary research was performed on the homogeneous distribution of elements in the sample filters and on the study of blank filters for the calculations of the background average element contents. The results obtained allowed to distinguish different major anthropogenic sources of trace elements in the atmosphere at the sampling sites: a) Zr, Hf, Sc, U and Th are related to atmospheric pollution derived from the ceramic industry of the Castellón area; b) As, Cr, Cs, Rb, Sb, Se, Zn are related to traffic and other industrial emission in the Castellón area, and As, Cr, Sb and Zn to power generation emissions in the rural area. Received: 26 April 1996 / Revised: 29 July 1996 / Accepted: 2 August 1996     

Lambda-display: a powerful tool for antigen discovery

Since its introduction in 1985, phage display technology has been successfully used in projects aimed at deciphering biological processes and isolating molecules of practical value in several applications. Bacteriophage lambda, representing a classical molecular cloning and expression system has also been exploited for generating large combinatorial libraries of small peptides and protein domains exposed on its capsid. More recently, lambda display has been consistently and successfully employed for domain mapping, antigen discovery and protein interaction studies or, more generally, in functional genomics. We show here the results obtained by the use of large libraries of cDNA and genomic DNA for the molecular dissection of the human B-cell response against complex pathogens, including protozoan parasites, bacteria and viruses. Moreover, by reviewing the experimental work performed in recent investigations we illustrate the potential of lambda display in the diagnostics field and for identifying antigens useful as targets for vaccine development.     

Instrumental neutron activation analysis of carbon containing micro-spheres from Jungfrau-Joch glacier ice

From about 700 kg old, high altitude glacier ice (age 400 y) more than 170 glassy spherical objects with a mean diameter of 100 m were isolated. Neutron activation analysis of individual transparent objects (each 10^–6 g) showed the presence of K, Sc, Cr, Fe, La, Eu, Au, etc., in varying concentrations. A detection limit of 10^–14 g/g was achieved by means of an anticompton circuit. A systematic study by mass spectrometry of positive and negative ions using a LASER microprobe disclosed that the main constituents of some of these smooth glacier spheres consisted of elemental carbon. The chemical composition of some spherules admits the possibility of extraterrestrial origin, e.g. ablation material from meteorites with high carbon contents, which entered the earth's atmosphere.     

Evaluation of atmospheric airborne particles in Lisbon, Portugal using neutron activation analysis

Summary We have employed Compton supression neutron activation analysis in conjunction with thermal and epithermal neutrons to detemine trace elements in airborne particulate matter in Lisbon, Portugal. As a result of the proximity of ocean marine, elements such as sodium and chlorine can signficantly decrease the analytical sensitivities of many elements of interest due ot the high backgrounds arising from ³⁸Cl and ²⁴Na. Compton suppression has resulted in the increase of the analytical sensitivities using thermal neutrons of Al, Ba, Ce, Cr, Cu, Ni, Rb, Se, Th, Ti, V, and Zn. The use of Compton suppression and epithermal neutrons significantly reduced the detection limits for As, I, K, Si, and W, while the utilization of solely epithermal neutrons improved the analyses of In.     

Determination of the trace element levels in atmospheric pollutants by neutron activation analysis

An investigation of the potentials of neutron activation analysis for the routine analysis of trace elements present in atmospheric pollutants is discussed. Various techniques including sequential air sampling, multiple neutron irradiation, high resolution γ-ray spectrometry, chemical isolation, high flux neutron irradiation and X-ray spectrometry have been employed to determine the levels of Pb, Al, V, I, Cl, Mn, Cu, Br, Na, La, Mo, Au, Cr, Fe, Ni, Se, Zn, Ag and Co in atmospheric pollutants. The results of the analysis of nearly two hundred samples collected from the Buffalo New York area during 1968–1969 are reported. Presented at the Fourth Annual Conference on Trace Substances in Environmental Health, University of Missouri, Columbia Missouri, USA (June, 1970).     

Cumulative neutron activation of short-lived radionuclides for the analysis of large samples in mineral exploration

Cumulative neutron activation is used to determine mg/kg concentrations of gold in rock samples, weighing 10 g. Twenty 0.5 g replicates are irradiated in an epithermal-neutron flux for 5 s and counted for 14 s. The twenty spectra are summed, and gold is measured with the 279 keV gamma-ray of^197mAu (7.2 s). Total analysis time for a 10 g sample is 400 s and detection limits around 2 mg/kg are achieved in gold ores, sulfides and silicates.     

Determination of trace elements in atmospheric wet precipitation by instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) methods have been developed for the simultaneous determination of multielement concentrations in both particulate and soluble fractions of atmospheric wet precipitation (AWP). Samples of AWP collected across Canada by Canadian Network for Sampling Precipitation (CANSAP) have been analyzed. The INAA method involves four sequential irradiations and counting after five different decay periods for measuring Ag, Al, As, Au, Ba, Br, Ca, Ce, Cl, Co, Cr, Cu, Dy, Fe, Hf, Hg, I, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Sm, Sr, Ti V and Zn. Precision and accuracy of the INAA methods have been evaluated, and detection limits have been calculated.     

Instrumental neutron activation determination of gold in mineral raw materials using a californium neutron source

A facility using a californium neutron source and a method for the neutron activation analysis of gold were developed. The sensitivity of the determination is 0.1 g/t. The sources of random and systematic errors have been studied. It has been concluded that in prospection and evaluation of gold ore deposits, the traditional test tube analysis for gold may be replaced with the developed method.     

Correction for neutron self-shielding in large-sample prompt-gamma neutron activation analysis

When a sample is analysed with neutron activation analysis (NAA) neutron self-shielding and gamma self-absorption affect the accuracy. Both effects become even more important when the mass of a sample analysed is changed from small (say, 1 g) to large (say 30 kg). Therefore, corrections have to be carried out. In this article only the correction method for neutron self-shielding is considered for a thermal neutron beam irradiating large homogeneous samples for prompt-gamma NAA (PGNAA). The correction method depends on the macroscopic scattering and absorption cross sections of the sample. To avoid doing experiments with samples with different macroscopic scattering and absorption cross sections, the Monte Carlo model MCNP is applied in the development of the correction method. The computational development of the method to determine these cross sections through flux monitoring outside the sample is described.