Astatine-211 labeling of protein using TCP as a bi-functional linker: synthesis and preliminary evaluation in vivo and in vitro

With 2,3,5,6-tetrafluorophenyl 3-(nodo-carboranyl) propionate (TCP) as a new potential bi-functional linker, bovine serum albumin (BSA) was conjugated with ²¹¹At, and the conjugated model protein (²¹¹At-TCP-BSA) was preliminarily evaluated in vitro and in vivo by comparison with ²¹¹At-SAB-BSA and ²¹¹At-SAPC-BSA, which conjugated with ²¹¹At via aryl derivatives ATE (N-succinimidyl-3-(tri-n-butylstannyl) benzoate) or SPC (N-succinimidyl 5-(tributylstannyl)-3-pyridinecarboxylate). The radiolabeled intermediate ²¹¹At-TCP was coupled to BSA in yields ranging from 35 to 45% with radiochemical purity of more than 98%. The conjugated ²¹¹At-TCP-BSA exhibited considerable stability in vitro in 0.1 mol/L PBS (pH 7.6) at room temperature (RT), similar to ²¹¹At-SAPC-BSA and ²¹¹At-SAB-BSA. Biodistribution of the ²¹¹At conjugated protein was investigated in NIH strain mice by I.V injection. The results showed that ²¹¹At-TCP-BSA was constantly stable in vivo as well as in vitro, but more stable than ²¹¹At-SAPC-BSA and ²¹¹At-SAB-BSA. These results implied that radioastatinated carboranes based on B–At bonds are higher stability than radioastatinated aryl derivatives based on C–At to in vivo deastatination. In other word, TCP should be a promising bi-functional linker for ²¹¹At conjugation of proteins or antibodies.     

211At标记蛋白质或多肽的方法研究

α核素211At具有良好的辐射生物学性质,以对肿瘤细胞具有高亲和性的单克隆抗体或多肽类配体为载体则是实现211At肿瘤靶向治疗的最理想方式之一。本文介绍了211At标记蛋白质或多肽的方法的现状与进展,对存在的一些问题及今后的发展方向进行了讨论。     

Acrolein hydrogenation on Pt(211) and Au(211) surfaces: a density functional theory study

Partial hydrogenation of acrolein, the simplest α,β-unsaturated aldehyde, is not only a model system to understand the selectivity in heterogeneous catalysis, but also technologically an important reaction. In this work, the reaction on Pt(211) and Au(211) surfaces is thoroughly investigated using density functional theory calculations. The formation routes of three partial hydrogenation products, namely propenol, propanal and enol, on both metals are studied. It is found that the pathway to produce enol is kinetically favoured on Pt while on Au the route of forming propenol is preferred. Our calculations also show that the propanal formation follows an indirect pathway on Pt(211). An energy decomposition method to analyze the barrier is utilized to understand the selectivities at Pt(211) and Au(211), which reveals that the interaction energies between the reactants involved in the transition states play a key role in determining the selectivity difference.     

Adsorption sensitivity of defected graphene towards NO molecule: a DFT study

Based on density functional theory, we studied the adsorption of a nitrogen monoxide (NO) molecule on the surface of perfect graphene (PG) and vacancy-defected graphene (VG), with the aim of searching the potential of graphene as an NO gas sensor. Different possible configurations have been considered for adsorption on vacancy-defected graphene split. The results indicated that the adsorption of the NO molecule on VG exhibited larger adsorption energy, higher charge transfer, smaller band length than that of perfect graphene. Meanwhile, the VG structure transformed a semiconductor into a conductor by the adsorption of the NO molecule. Furthermore, the partial electronic density of states (PDOS) results showed that hybridizations between the NO molecule and VG were mainly contributed by N-2p, O-2p, and C-2p orbitals. These results could provide useful information for the design of gas sensors based on graphene.     

A radionuclide generator for the production of211Pb and its daughters

²¹¹Pb and its daughters are produced in a generator system which utilizes the distillation of the intermediate daughter²¹⁹Rn from²²³Ra. The radium is precipitated as the stearate to isolate the parent while allowing the gaseous daughter to emanate. While the yield of the system is low, approximately 10%, the radionuclidic purity is extremely high. No measurable²²³Ra is found in the product.²²³Ra is separated from its parent,²²⁷Ac, by cation exchange.Deceased.Research supported in part by the Office of Health and Environmental Research, U.S. Dept. of Energy.     

Synthesis of a (+)-anatoxin-a analogue for monoclonal antibodies production

Anatoxin-a analogue was prepared by resolution of aminoacid 1 using chiral (R)-4-phenyl-oxazolidin-2-thione as derivatizing agent. X-ray diffraction of a diastereomer allowed us to determine its absolute configuration. The synthesis could then be completed in few steps followed by introduction of an amide linker bearing a terminal alkyne in order to attach a carrier protein for monoclonal antibodies production.     

211At labeling of a monoclonal antibody and its Fab fragment: Cytotoxicity on human gastric cancer cells and biodistribution in nude mice with tumor xenografts

An antigastric cancer monoclonal antibody, 3H11 and its Fab fragment, were labeled with #-emitter ²¹¹At using p-[²¹¹At] astatobenzoic acid (PAtBA) intermediate. The astatinated antibodies had conspicuous cytotoxic effect on human gastric cancer cell M85 in vitro. Tissue distribution of the astatinated antibodies were investigated in nude mice with subcutaneous tumor xenografts by i.v. injection. The astatinated Fab fragment was better suitable for 7.2-hour half life of ²¹¹At, since its tumor uptake remained higher (9.48–8.42 I.D%/g) than the astatinated intact antibody (~4.0 I.D%/g) from 3 to 14-hour post injection. However, the undesired high ²¹¹At uptake of the astatinated antibodies in some normal tissues, such as stomach, kidney and lung, suggested that the ²¹¹At labeled antibodies should be further explored.     

Double fluorescent labeling method used for a study on liposomes

Carboxyfluorescein (CF) and Calcein (CAL) have almost the same fluorescent spectrum. However, only CAL forms a nonfluorescent chelate with the Co2+ ion. It was proven that this phenomenon can be used for the fractional determination of CF and CAL. And this fractional determination method was available for a study on liposomes.     

[N]-Isotopic labeling: a suitable tool to study the reactivity of bis lactams

The unexpected reactivity of 2,5-diketopiperazines under basic conditions, thanks to N-Boc activation, allows access to valuable pharmacological scaffolds, such as original statine derivatives. Toward this transannular rearrangement of activated lactams (TRAL), we report here the study of bis lactam reactivity using [¹⁵N]-isotopic labeling.     

Neaumycin: a new macrolide from Streptomyces sp. NEAU-x211

Neaumycin, a new 30-membered macrolide featuring an internal diester bridge, a molecular architecture that is unprecedented among known macrolide natural products, was isolated from a soil actinomycete strain Streptomyces sp. NEAU-x211. The structure of neaumycin was elucidated on the basis of comprehensive mass and NMR spectroscopic interpretation, including the relative stereochemistry of four independent coupling systems.     

A density functional study of NO adsorption and decomposition on Ni(211) and Pd(211) surfaces

The adsorption and decomposition of NO have been investigated by using density functional theory method at the generalized gradient approximation level. We have performed calculations on adsorption energies and structures of NO on Ni(211) and Pd(211) surfaces with full-geometry optimization and compared them with the experimental data. The most favorite adsorption on both surfaces occurs at the bridge site parallel to step edge (sb), while the energy difference from the second favorite site of a threefold hollow site near step edge is less than 0.1 eV. Decomposition pathways have been investigated with transition state search. The decomposition pathway, where NO leans toward the step, is most probable for both surfaces. The overall activation energy for decomposition is 0.39 and 1.26 eV for Ni(211) and Pd(211), respectively. The present results clearly show that the NO molecules on Pd(211) are less activated than those on Ni(211). We have studied also reorganization of NO on Pd(211) at higher coverages up to 1/3 ML (monolayer) [three NO molecules in a (3 x 1) unit cell]. The site occupation is not in a sequential manner as the NO coverage is increased, and a reorganization of NO adsorbates occurs (the NO molecule at sb becomes tilting up at higher coverage), which can interpret the experimental data of Yates and co-workers very well.     

Nanoengineered glycan sensors enabling native glycoprofiling for medicinal applications: towards profiling glycoproteins without labeling or liberation steps

Nanoengineered glycan sensors may help realize the long-held goal of accurate and rapid glycoprotein profiling without labeling or glycan liberation steps. Current methods of profiling oligosaccharides displayed on protein surfaces, such as liquid chromatography, mass spectrometry, capillary electrophoresis, and microarray methods, are limited by sample pretreatment and quantitative accuracy. Microarrayed platforms can be improved with methods that better estimate kinetic parameters rather than simply reporting relative binding information. These quantitative glycan sensors are enabled by an emerging class of nanoengineered materials that differ in their mode of signal transduction from traditional methods. Platforms that respond to mass changes include a quartz crystal microbalance and cantilever sensors. Electronic response can be detected from electrochemical, field effect transistor, and pore impedance sensors. Optical methods include fluorescent frontal affinity chromatography, surface plasmon resonance methods, and fluorescent carbon nanotubes. After a very brief primer on glycobiology and its connection to medicine, these emerging systems are critically reviewed for their potential use as core sensors in future glycoprofiling tools.     

Nature of vibrational coupling in helical peptides: an isotopic labeling study

Infrared (IR) and vibrational circular dichroism (VCD) spectra were measured for a series of isotopically ((13)C on two or more amide Cdouble bond]O) labeled, 25 residue, alpha-helical peptides of the sequence Ac-(AAAAK)(4)AAAAY-NH(2) that were also studied in the previous paper. Theoretical IR and VCD simulations were performed for correspondingly isotopically labeled Ac-A(24)-NHCH(3) constrained to an alpha-helical conformation by use of property tensor transfer from density functional theory (DFT) calculations on Ac-A(10)-NHCH(3). The simulations predicted and experiments confirmed that the vibrational coupling constants between i, i + 1 and i, i + 2 residues differ in sign, thus leading to a reversal of the (13)C VCD pattern and explaining the large shift in the (13)C amide I frequency as reported in the previous paper. The sign of the coupling constant remained consistent for larger label separation (with the exception of i, i + 4) and for more labels with uniform separation. Such effects confirm that the isotopically labeled group vibrations are essentially only coupled to each other and are effectively uncoupled from those of the unlabeled groups. This development confirms the utility of isotopic labels for site-specific structural studies with vibrational spectra. Observed spectral effects cannot be explained by considering only transition dipole coupling (TDC) between amide oscillators, particularly for smaller label separations, but the TDC and ab initio predicted couplings roughly converge at large separation.     

SN2 fluorination reactions in ionic liquids: a mechanistic study towards solvent engineering

In the catalysis of S(N)2 fluorination reactions, the ionic liquid anion plays a key role as a Lewis base by binding to the counterion Cs(+) and thereby reducing the retarding Coulombic influence of Cs(+) on the nucleophile F(-). The reaction rates also depend critically on the structures of ionic liquid cation, for example, n-butyl imidazolium gives no S(N)2 products, whereas n-butylmethyl imidazolium works well. The origin of the observed phenomenal synergetic effects by the ionic liquid [mim-(t)OH][OMs], in which t-butanol is bonded covalently to the cation [mim], is that the t-butanol moiety binds to the leaving group of the substrate, moderating the retarding interactions between the acidic hydrogen and F(-). This work is a significant step toward designing and engineering solvents for promoting specific chemical reactions.     

A spin labeling study of pig cardiac tropomyosin

Tropomyosin (TM) extracted from pig cardiac muscle was spin-labeled with 2,2,6,6-tetramethyl-4-(dichlorotriazin)-aminopiperidine-1-oxyl. The ESR spectra of the product (SL-TM) were of a type of weak immobilization. Effects of three means for the denaturation were observed on the above spectra. The ESR spectrum obtained for SL-TM after enzymatic degradation was found to be analogous to that for the label itself in a dilute solution and thereby the quantity of labels bound in SL-TM estimated. The Arrhenius plots attained through variable temperature measurement for SL-TM's exhibited two inflexion points (the conformational transition temperatures for TM) around 45 degrees C and 74-75 degrees C, the latter temperature having not been reported in literature so far. However, the enzymatic degradation product from SL-TM behaved quite differently from it in the response to microwave power saturation and temperature variation.     

Chemoselective photorearrangements of diazinobarrelenes. Deuterium labeling study

Chemoselective photorearrangements of pyrazino-, quinoxalino-, and benzoquinoxalinobarrelenes were investigated by deuterium-labeling experiment. Photolysis of pyrazinobarrelene 4 and quinoxalinobarrelene 5 with 300 nm region light under either direct or sensitized conditions afforded semibullvalenes 7 and 8, respectively; benzoquinoxalinobarrelene 6 was inert to both reaction conditions. Irradiation of deuterated pyrazinobarrelene 4-d4 and quinoxalinobarrelene 5-d4 afforded deuterated semibullvalenes 7-d4-A-7-d4-F and 8-d4-A-8-d4-F, respectively. Of the two a priori possibilities of bridging, the deuterium-labeling experiment has shown that deuterated pyrazinobarrelene 4-d4 afforded 98% (C6D6) and 95% (CD3CN) of semibullvalenes generated through aryl-vinyl (A-V) bridging, whereas the quinoxalinobarrelene 5-d4 furnished 79% (C6D6) and 71% (CD3CN) of semibullvalenes generated through vinyl-vinyl (V-V) bridging. The contrasting photochemical behavior of heteroarene-fused barrelenes 4-6 was explained qualitatively in terms of triplet energy minimization and relative stability of diradicaloid intermediates.     

A trial of automatic kidney detection in a dynamic renal study

We developed an automatic kidney detection procedure designed to do away with extraneous margins such as the liver or spleen while leaving the kidney margins intact using Laplacian operations and concurrence calculations. We evaluated the detectability of kidneys using our procedures and found that the renal margins were successfully detected in 84 cases of 100 subjects (84%) including 176 kidneys out of a total of 198 kidneys (89%). It was shown that as the renal function decreased the detectability of the renal margin decreased. In eight cases (16 kidneys) out of 9 patients who later resultantly received hemodialysis even manual settings of the renal ROI were very difficult. After excluding these 8 cases the detectability was 92% for all the cases and 95% for the kidneys. It was our conclusion that this method is sufficient for clinical application.     

Affinity protection chromatography for efficient labeling of antibodies for use in affinity capillary electrophoresis

Capillary electrophoresis immunoassay (CEIA) is shown to be substantially more sensitive to the antibody (Ab) reagent quality than are immunosorbent methods such as enzyme-linked immunosorbent assays (ELISA). Cyanine 5 (Cy5)-labeled monoclonal anti-ovalbumin (mAb*) was inactive for CEIA of ovalbumin (Ov), yet was functional in ELISA for Ov. ELISA showed the mAb* was at least ten times less active, accounting for the poor CEIA performance. Labeled polyclonal Ab was inactive for a dye to protein ratio greater than 1.6. An affinity protection chromatography procedure (APC) was developed for Ab labeling, which avoided degradation of the Ab binding site. Ov was covalently bound to cyanogen bromide activated cellulose gel in a column, and used to capture the Ab. The coupling efficiency for Ov to the gel was 74-97%, Ab could then be bound with 95-100% efficiency, and Ab* was recovered in 50% yield following labeling on the column. This procedure was performed successfully in three different laboratories, indicating the robustness of the optimized APC synthetic method. No inactive Ab* could be detected in the APC product. The CEIA detection limit for ovalbumin using APC labeled mAb was 173 nM, when [Ab*] was fixed at 163 nM. The association constants of mAb and mAb* were determined by CEIA.     

Computer-aided process design of affinity membrane adsorbers: a case study on antibodies capturing

Design of affinity membrane adsorbers for the purification of biomolecules requires a consideration of loading, washing, and elution. Modelling and simulation of membrane adsorbers in literature is, however, strongly focused on the loading step. Therefore, in this work, a complete process model which takes all the different steps into account was developed. Breakthrough experiments in which human IgG was captured onto and eluted from Sartobind Protein A downscale modules were used for model validation and for estimation of the required model parameters. The experimentally observed breakthrough curves were independent of the applied flow rate and from these results linear correlations between lumped kinetic parameters and linear velocity were determined. During elution, desorption was best described by an irreversible reaction of first order in H⁺ concentration. Applicability of the developed model to computer-aided design was illustrated through a process analysis study in which the influence of the amount of loaded protein per cycle on the process yield and productivity was investigated.