Characterization by inverse gas chromatography of the surface properties of silicas modified by poly(ethylene glycols) and their models (oligomers,diols)

Summary Silicas are modified by esterification of the surface silanol groups either with poly(ethylene glycol), its oligomers or diols of the same chain length. A whole series of samples carrying grafts differing in chemical nature, molecular weight and number are prepared. These samples are examined by inverse gas chromatography. The London component of the surface energy, the acid/base interaction parameter and the enthalpy of adsorption of alkanes and polar probes are measured. It is apparent for PEG-grafted silicas that the most important variable is the surface coverage, i.e., the number of monomer units of the grafted PEG per unit surface area, and not its molecular weight. The fixation of PEG changes drastically the surface properties of the silicas. According to the surface coverage, silica may acquire base-like properties. The strong PEG-silica interactions cause the polymer to adopt a flat configuration by spreading on the solid surface. Grafted diols behave entirely differently: the conformation of the longer grafts is best described by a sandwich structure in which the outer surface layer is formed by associated alcohol groups, whereas the middle part is formed by the highly organized aliphatic parts of the chains. IR spectroscopy supports these conclusions.     

Investigation of the iodine–poly(vinylpyrrolidone) interaction employed in the determination of biocidal iodine by colorimetric solid-phase extraction

Colorimetric solid-phase extraction (C-SPE) has been previously explored as a means to monitor the iodine-based disinfectant used in the water systems on board the space shuttle. This same disinfectant is baselined for eventual deployment in the US water recovery system planned for node 3 of the International Space Station (ISS). With C-SPE, the I₂ concentration is determined from the diffuse reflectance spectrum (DRS) of the yellow iodine–poly(vinylpyrrolidone) (PVP) complex using the Kubelka–Munk function. However, the solution chemistry of iodine is very complex and results in a variety of inorganic species (e.g., I⁻, I₂, I₃⁻, HOI) that have very different biocidal capabilities. Thus, the nature of the interaction of iodine with PVP, and more specifically, the identity of the iodine species involved in the interaction, requires more elucidation. This paper reports the findings from a series of detailed experiments conducted to elicit a more complete understanding of the iodine–PVP system employed in C-SPE. The results indicate that I₂, one of the two dominant biocidal forms of iodine, is the species responsible for the analytical signal in our C-SPE platform. These findings lay the ground work for the planned development of a multiplexed iodine determination and speciation platform for in-flight analysis of spacecraft water samples.     

Theory of two-photon absorption in poly(diphenyl) polyacetylenes

In this paper, we present a theoretical study of the nonlinear optical response of the newly discovered conjugated polymer poly(diphenyl)polyacetylene (PDPA). In particular, we compute the third-order nonlinear susceptibility corresponding to two-photon absorption process in PDPA using: (a) independent-particle Hückel model, and (b) using the correlated-electron Pariser-Parr-Pople (P-P-P) model coupled with various configuration-interaction methodologies such as the singles-configuration-interaction (SCI), the multi-reference-singles-doubles CI (MRSDCI), and the quadruples-CI (QCI) method. At all levels of theory, the polymer is found to exhibit highly anisotropic nonlinear optical response, distributed over two distinct energy scales. The low-energy response is predominantly polarized in the conjugation direction, and can be explained in terms of chain-based orbitals. The high-energy response of the polymer is found to be polarized perpendicular to the conjugation direction, and can be explained in terms of orbitals based on the side phenylene rings. Moreover, the intensity of the nonlinear optical response is also enhanced as compared to the corresponding polyenes, and can be understood in terms of reduced optical gap.     

Convenient multigram synthesis of monodisperse oligo(ethylene glycols): effective reaction monitoring by infrared spectroscopy using an attenuated total reflection fibre optic probe

A convenient approach for the synthesis of monodisperse oligo(ethylene glycols) up to 12 units is described. A novel cleavage protocol replacing laborious hydrogenolysis is introduced to achieve a fast, inexpensive and widely applicable procedure. In addition to the synthetic part, Fourier transform infrared (FTIR) spectroscopy using a fibre optic attenuated total reflection (ATR) sensor was applied to monitor the formation of sensitive key intermediates, resulting in optimized reaction times. By applying this in-line technique, the possibility of real-time analysis under inert conditions was impressively demonstrated.     

Modification of porous poly(styrene-divinylbenzene) beads by friedel-crafts reaction

Summary The influence of Friedel-Crafts reaction on the properties of poly(styrene-divinylbenzene) porous copolymers was studied. Two porous copolymers containing 0.7 and 0.9 mole fractions of divinylbenzene were used for modification. The aim of the process was to increase the copolymer crosslinking. As a crosslinker, tetrachloromethane in the presence of aluminium chloride was used. Reactions were monitored by FTIR and XRF analyses. The main result of the modification process is the change of the copolymer porous structure. Modification also has an influence on the chromatographic properties of the copolymers, especially selectivities.     

Hydrogels of β-cyclodextrin crosslinked by acylated poly(ethylene glycol): Synthesis and properties

Networks of β-cyclodextrin have been prepared by reaction with acylated poly(ethylene glycol) with a molar mass of 600 g/mol. Samples with different β-cyclodextrin/poly(ethylene glycol) ratios: 1/4, 1/6, 1/8 and 1/10 have been prepared. Both components are bonded by ester groups, resulting in a network that can be degraded by hydrolysis in basic and acidic media. The maximum stability of the hydrogels is reached at pH 4. The hydrogel percentage water content depends on β-cyclodextrin content ranging from 82 to 98, and the swelling data obtained for these hydrogels fit well with a second order kinetics. The sorption behavior of these hydrogels has been tested by employing 1-naphthol as model molecule. The sorption capacity is close to other cyclodextrin networks previously reported and depends on the hydrogel composition and the concentration of 1-naphthol.     

Distribution analysis of ultra-high molecular mass poly(ethylene oxide) containing silica particles by size-exclusion chromatography with dual light-scattering and refractometric detection

Two different size-exclusion chromatography (SEC) systems, connected in-line either to a low-angle light scattering (LALS) or to a multiangle light scattering (MALS) detector, are employed for determination of molecular mass distributions (MMD) of poly(ethylene oxide) (PEO) samples having a weight average molecular mass up to eight millions. The detrimental effect of the presence of strongly scattering silica particles in the samples on the light scattering signal can be eliminated using a suitable sample dissolution procedure utilizing silica solubility in aqueous mobile phase. The selection of flow-rate and sample concentration have a large impact on the obtained results. Hydrodynamic retardation phenomena and nonlinearity effects are shown to introduce severe errors in the molecular mass distributions unless flow-rate and sample concentration are kept at sufficiently low levels. Self-compensating ability of the dual detection in flow-rate effects is shown to be the main advantage here. A good agreement between the results obtained using LALS and MALS detection is found provided that a carefully selected angular extrapolation procedure is used in the case of MALS data. Thus, using carefully selected experimental conditions, SEC with light-scattering (LS) and refractometric detection proved to be an efficient technique for MMD characterisation also of ultra-high molecular mass (UHM) PEO polymers.     

Determination of antimony in poly(ethylene terephthalate) by volatile bromide generation flame atomic absorption spectrometry

A chemical volatilization method has been developed for the determination of antimony in poly(ethylene terephthalate) (PET), after a simple acid digestion using discontinuous volatile generation and efficient introduction to a flame atomic absorption spectrometer (FAAS). The method has been evaluated and optimized by different approaches which included experimental design, numerical evaluation, visual interpretation of 3-D surface response, and artificial neural network. Its performance showed a detection limit (3s) of 300 ng as the absolute detection limit for a sample injection of 215 μL. The linear response, at 217.6 nm, ranged from 1.0 to 17.2 μg of Sb(V), with a reproducibility of 4.5 (% r.s.d.). The Sb content in PET analyzed by this method was found in the range 98–190 mg·kg⁻¹, which was in good agreement with an ICP-AES standard method, and demonstrated a low level of interferences.     

Determination of major and trace elements in biological materials by microwave induced plasma optical emission spectrometry (MIP-OES) following tetramethylammonium hydroxide (TMAH) solubilization

A simple, alternative method to acid digestion is presented for the preparation of biological materials for major and trace elements by microwave induced plasma optical emission spectrometry (MIP-OES). Standard reference materials were solubilized using a methanolic solution of tetramethylammonium hydroxide (TMAH) by the application of ultrasonic agitation. Following dilution with water suspensions were pumped to a V-groove Babington-type nebulizer then into argon plasma. Limits of detection and precision are reported for major (Na, K, Ca, Mg) and trace (Cu, Fe, Sr, Zn) elements. Standard addition procedures were used to minimize possible matrix interferences. The method offers relatively good precision (R.S.D. ranged from 6 to 12%). Measured concentrations are in satisfactory agreement with certified values for the biological reference materials: TORT-1 (Lobster hepatopancreas), IAEA-153 (Milk powder) and NIST 1577 (Bovine liver). The simple procedure could be useful as a routine analysis of biological materials.     

Synthesis of poly(N,N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N,N‐dimethylacrylamide) and its application for separation of proteins by capillary zone electrophoresis

A series of well‐defined triblock copolymers, poly(N, N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N, N‐dimethylacrylamide) (PDMA‐b‐PEO‐b‐PDMA) synthesized by atom transfer radical polymerization, were used as physical coatings for protein separation. A comparative study of EOF showed that the triblock copolymer presented good capillary coating ability and EOF efficient suppression. The effects of the M_r of PDMA block in PDMA‐b‐PEO‐b‐PDMA triblock copolymer and buffer pH on the separation of basic protein for CE were investigated. Moreover, the influence of the copolymer structure on separation of basic protein was studied by comparing the performance of PDMA‐b‐PEO‐b‐PDMA triblock copolymer with PEO‐b‐PDMA diblock copolymer. Furthermore, the triblock copolymer coating showed higher separation efficiency and better migration time repeatability than fused‐silica capillary when used in protein mixture separation and milk powder samples separation, respectively. The results demonstrated that the triblock copolymer coatings would have a wide application in the field of protein separation.     

Thermo-responsive mending of polymers crosslinked by thermally reversible covalent bond: Polymers from bisfuranic terminated poly(ethylene adipate) and tris-maleimide

Remending properties of a network polymer with reversible reactivity are described. The network structure is constructed by a Diels-Alder (DA) reaction between furyl-telechelic poly(ethylene adipate) (PEAF₂) and a tris-maleimide, M₃. When a film sample was cut into two pieces and the cut surfaces were kept in contact with each other at 60 °C, rejoining of the cut pieces was observed. This mending was induced by the reversible cross-linking reaction bridging the cut surfaces. At the cut front, the “weak” DA adducts are selectively dissociated sacrificially to release the stress so as to protect the chemical structure of the prepolymer and the linker against the scission or degradation. The dissociated furan and maleimide readily reconnect by forward DA reaction to mend the material. The remending was also observed for the samples kept at room temperature after melting at 60 °C. So, the PEAF₂ network polymer is a thermo-responsive mendable material in which crack healing is induced by a prompt thermal stimulus.     

Increased sensitivity of an enzyme immunoassay (ELISA) for the determination of triazine herbicides by variation of tracer incubation time

Immunoassays for triazine herbicides were tested for their reaction to the variation of the tracer incubation time. By application of a sequential technique the measuring range of atrazine could be expanded to five decades and the total duration of the test could be reduced to about 30 min. In an optimized version a lower detection limit of 9 pmol/l (2 ng/l) was achieved. The detection limit of a sensitive immunoassay for terbuthylazine is also below the concentration limit demanded of the German drinking water regulation (100 ng/l) and reaches 130 pmol/l (30 ng/l). Short tracer incubation times did not lead to increased cross-reactivities in contrast to theoretical models [1, 2]. Different mechanisms, which could cause a shift of the center point of the calibration curve, are discussed, including kinetic considerations.Nomenclature ametryn 2-(ethylamino)-4-(isopropylamino)-6-(methylthio)-1,3,5-triazine - atrazine 2-(chloro)-4-(ethylamino)-6-(isopropylamino)-1,3,5-triazine - deethylatrazine 2-(amino)-4-(chloro)-6-(isopropylamino)-1,3,5-triazine - DMSO dimethylsulfoxide - DOC dissolved organic carbon - ELISA enzyme-linked immunosorbent assay - glyme 1,2-dimethoxyethane - hydroxyatrazine 2-(ethylamino)-4-(hydroxy)-6-(isopropylamino)-1,3,5-triazine - PBS phosphate buffered saline - propazine 2-(chloro)-4,6-bis(isopropylamino)-1,3,5-triazine - simazine 2-(chloro)-4,6-bis(ethylamino)-1,3,5-triazine - terbuthylazine 2-(tert-butylamino)-4-(chloro)-6-(ethylamino)-1,3,5-triazine - TLC thin-layer chromatography - TMB 3,3,5,5-tetramethylbenzidine - tracer enzyme (peroxidase) labeled hapten     

Preparation of ABC miktoarm star terpolymer containing poly(ethylene glycol), polystyrene,and poly(tert‐butylacrylate) arms by combining diels–alder reaction,atom transfer radical,and stable free radical polymerization routes

The ABC type miktoarm star terpolymer was prepared utilizing “core‐in” and “core‐out” methods via combination of Diels–Alder reaction (DA), stable free radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, in DA reaction, poly(ethylene glycol)‐maleimide (PEG‐maleimide) precursor was reacted with succinic acid anthracen‐9‐ylmethyl ester 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxy‐carbonyl]‐propyl ester, 8 , to give DA adduct, 9 , which has appropriate functional groups for SFRP and ATRP. Second, a previously obtained 9 was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PEG‐polystyrene (PEG‐PSt) precursor with a bromine functionality in the core was employed as a macroinitiator for ATRP of tert‐butylacrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C to give ABC type miktoarm star terpolymer (PEG‐PSt‐PtBA) with controlled molecular weight and low polydispersity (M_w/M_n < 1.27). The obtained polymers were characterized by gel permeation chromatography and ¹H NMR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 499–509, 2006     

Solid-phase extraction of Zn(II), Cu(II), Ni(II) and Pb(II) on poly(vinyl chloride) modified with 3-ferrocenyl-3-hydroxydithioacrylic acid, and their subsequent determination by electrothermal atomic absorption spectrometry

A new chelating resin based on poly(vinyl chloride) functionalized with 3-ferrocenyl-3-hydroxydithioacrylic acid has been synthesized and characterized. The resin was used as a packing material in an off-line mini-column solid-phase extraction system for preconcentration of Zn, Ni, Cu and Pb in water samples prior to their determination using electrothermal atomic absorption spectrometry. Analytical parameters such as pH, flow rate and sample breakthrough volume were optimized. The breakthrough volume for 0.2 μg of analyte using 0.1 g of adsorbent was 60–100 mL, permitting enrichment factors of at least 60. The proposed procedure, validated using a riverine water reference material (SLRS-3), was applied to environmental water samples. The potential for use of the chelating resin to separate interfering ions such as Na, K, Mg and Ca is also explored. Correspondence: Jackson K. Kiptoo, Department of Chemistry, Jomo Kenyatta University of Agriculture and Technology, P.O. Box 62000-00200, Nairobi, Kenya     

Preparation of star block copolymers with polystyrene‐block‐poly(ethylene oxide) as side chains on hyperbranched polyglycerol core by combination of ATRP with atom transfer nitroxide radical coupling reaction

The star block copolymers with polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) as side chains and hyperbranched polyglycerol (HPG) as core were synthesized by combination of atom transfer radical polymerization (ATRP) with the “atom transfer nitroxide radical coupling” (“ATNRC”) reaction. The multiarm PS with bromide end groups originated from the HPG core (HPG‐g‐(PS‐Br)_n) was synthesized by ATRP first, and the heterofunctional PEO with α‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy group and ω‐hydroxyl group (TEMPO‐PEO) was prepared by anionic polymerization separately using 4‐hydroxyl‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (HTEMPO) as parents compound. Then ATNRC reaction was conducted between the TEMPO groups in PEO and bromide groups in HPG‐g‐(PS‐Br)_n in the presence of CuBr and pentamethyldiethylenetriamine (PMDETA). The obtained star block copolymers and intermediates were characterized by gel permeation chromatography, nuclear magnetic resonance spectroscopy, fourier transform‐infrared in detail. Those results showed that the efficiency of ATNRC in the preparation of multiarm star polymers was satisfactory (>90%) even if the density of coupling cites on HPG was high. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6754–6761, 2008     

Fast separation and determination of coumarins in Fructus cnidii extracts by CEC using poly(butyl methacrylate‐co‐ethylene dimethacrylate‐co‐[2‐(methacryloyloxy)ethyl] trimethylammonium chloride) monolithic columns

A rapid CEC method with poly(butyl methacrylate‐co‐ethylene dimethacrylate‐co‐[2‐(methacryloyloxy)ethyl] trimethylammonium chloride) monolithic column has been developed for separation and determination of four coumarins (isopimpinelline, bergapten, imperatorin, and osthole) in Fructus cnidii extracts. The effect of polymerization condition including the monomers ratio and the porogens ratio were studied. The mobile‐phase composition, such as the composition of organic solvent, the concentration and pH of buffer, was also optimized. Under the same condition (50% ACN and 50% of a 10 mM sodium dihydrogen phosphate electrolyte at pH 4.95), in contrast to 25 min of analysis time in HPLC and 10 min of analysis time in pCEC, a fast separation of these analytes was achieved in less than 5 min in CEC. Method validation was developed in accordance with the analytical procedures. Intra‐ and interday precisions (RSD) for relative retention time and peak area were less than 1.69 and 4.63%, and LODs were lower than 0.5 μg/mL. Calibration curves of four compounds also showed good linearity (r²>0.995). The mean recoveries ranged between 93.91 and 98.65%. With this CEC system, the quality of F. cnidii extracts from various resources was evaluated by determining the contents of the four coumarins.     

Patterning of biomolecules on a poly(-caprolactone) film surface functionalized by ion implantation

Biomolecule patterning is important due to its potential applications in biodevices, tissue engineering, and drug delivery. In this study, we developed a new method for a biomolecular patterning on poly(-caprolactone) (PCL) films based on ion implantation. Ion implantation on a PCL film surface resulted in the formation of carboxylic acid groups. The generated carboxylic acid groups were used for the covalent immobilization of amine-functionalized p-DNA, followed by hybridization with fluorescently tagged c-DNA. Biotin-amine was also covalently immobilized on the carboxylic acid generated PCL surfaces. Successful biotin-specific binding of streptavidin further confirmed the potential of this strategy for patterning of various biomolecules.