Solvent effects on kinetics of an heteroatomic nucleophilic substitution reaction in ionic liquid and molecular solvents mixtures

Rate constants, k _A, for the aromatic nucleophilic substitution reaction of 2-chloro-3,5-dinitropyridine with aniline were determined in different compositions of 2-propanol mixed with hexane, benzene, and 2-methylpropan-2-ol and 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO₄]) with dimethyl sulfoxide at 25°C. The obtained rate constants of the reaction in pure solvents are in the following order: 2-methylpropan-2-ol > dimethyl sulfoxide > 2-propanol > hexane > benzene > [Emim][EtSO₄]. Molecularmicroscopic solvent parameters corresponding to the selected binary mixtures were utilized to study the kinetics of a nucleophilic substitution reaction in order to investigate and compare the effects of the solvents on a chemical process. The influence of solvent parameters including normalized polarity (E _T ^N ), dipolarity/polarizability (π*), hydrogen bond donor acidity (α), and hydrogen bond acceptor basicity (β) on the second-order rate constants were investigated and multiple linear regressions gave much better results with regard to single parameter regressions. The dipolarity/polarizability of media has a positive effect in all mixtures regarding zwitterionic character of the reaction intermediate and the hydrogen bond acceptor basicity of the solvent by stabilizing of activated complex increases the reaction rate.     

Solvent Effects on Tautomeric and Microscopic Protonation Constants of Glycine in Different Aqueous Solutions of Methanol and Ethanol

The acid-base equilibria of glycine have been studied in different aqueous solutions of methanol and ethanol (0?C45?% v/v) using a potentiometric method. In this study, the macro and micro protonation constants of the amino acid and its tautomeric constant have been determined at 25?°C and constant ionic strength (0.1 mol?dm^?3 NaClO₄). The protonation and the tautomeric constants of glycine in different binary mixtures were analyzed in terms of the Kamlet, Abboud and Taft (KAT) parameters. Single-parameter correlations of the constants versus ?? (hydrogen-bond donor acidity), ?? (hydrogen-bond acceptor basicity) and ?? ^? (dipolarity/polarizability) are poor in all solutions. Multi-parameter correlations show better results, but dual-parameter correlations represent significant improvements with regard to the single- and multi-parameter models. Linear correlation is observed when the experimental protonation constant values are plotted versus the calculated ones when the KAT parameters are considered. Finally, the results are discussed in terms of the effect of the solvent on protonation and tautomeric constants.     

Application of the solvation parameter model to poly(methylcyanopropylsiloxane) stationary phases

The solvation parameter model has been applied to the specific retention volumes of 65 solutes of varied polarity on glass capillary columns coated with commercial and synthesized poly(methylcyanopropyl)siloxanes (CNPXX) with eight different percentages of cyanopropyl group (CNP). Their system constants were determined at 75, 90, 105 and 120 degrees C. The polymers examined do not either show any acidity (b = 0) or interact with solute pi/n electrons (e = 0); the prominent constants, dipolarity/polarizability and hydrogen-bond basicity, are of the same order (s approximately a), and the cavity formation/dispersive forces have normal values. Constants s, l and a decrease linearly with temperature for each cyanopropyl percentage. At each temperature, the constants s and a increase with polarity of polymer according to a curve, while the constant l decreases slightly. Cluster analysis shows that six CNPXX with medium to high cyanopropyl substitution integrate into a group with other high-polarity cyano-containing stationary phases taken from the literature, while the other three CNPXX with low CNP percentage form a group with other low-polarity stationary phases of different chemical nature. These clusters are supported by the dendrogram of 52 stationary phases made with the nine polymers presented here and other 43 taken from the literature.     

Protonation Constants of Uridine 5′-Monophosphate in Different Aqueous Solutions of Methanol

The protonation equilibria of uridine 5′-monophosphate disodium salt (UMP) was determined in binary solvent mixtures of water–methanol containing 0, 10, 15, 20, 25, 30, 35, 40, 45, and 50 % (v/v) methanol, using a combination of spectrophotometric and potentiometric methods at 25 °C and constant ionic strength (0.1 mol·dm^?3 NaClO₄). The protonation constants were analyzed using Kamlet, Abboud, and Taft parameters. A good linear correlation of the protonation constants (on the logarithmic scale) was obtained. Dual-parameter correlation of log₁₀ K versus π* (dipolarity/polarizability) and α (hydrogen-bond donor acidity), as well as π* and β (hydrogen-bond acceptor basicity), gave good results in various aqueous solutions of methanol. Finally, the results are compared with CMP, a homolog of UMP, and are discussed in terms of the effect of the solvent on the protonation constants.     

Lipophilicity measurement of drugs by reversed phase HPLC over Wide pH range using an alkaline-resistant silica-based stationary phase, XBridge Shield RP(18)

We propose a reversed phase HPLC (RP-HPLC) with an alkaline-resistant silica-based stationary phase, XBridge Shield RP(18), for the determination of the lipophilicity of drugs with diverse chemical nature ranging from acidic to basic. A set of 40 model compounds with well-defined solvatochromic parameters was selected to allow a broad distribution of structural properties. The chromatographic results showed that the lipophilicity index log k(w) obtained with XBridge Shield RP(18) was well correlated with experimental log P(oct) values (r(2)=0.96). Linear solvation free-energy relationship (LSER) analyses revealed that the retention mechanism of the stationary phase and 1-octanol/water partitioning were controlled by almost the same balance of intermolecular forces (hydrophobicity as expressed by the van der Waals volume V(w), H-bond acceptor basicity beta, and dipolarity/polarizability pi*). The results showed that XBridge Shield RP(18) phase overcomes the shortcomings of the silica-based stationary phases, the application of which to lipophilicity measurements had been limited to neutral and acidic compounds.     

Dipolarity, hydrogen-bond basicity and hydrogen-bond acidity of aqueous poly(ethylene glycol) solutions.

Poly(ethylene glycol) (PEG) in water is known to alter the structure and/or state of water to give a different polarity from that of pure water. We determined using the solvatochromic comparison method the dipolarity/polarizability (pi*), hydrogen bond (HB) accepting basicity (beta) and HB donating acidity (alpha) of aqueous solutions of PEGs of variegated molecular weights at different concentrations in order to understand the influence of the polymer on these properties of water. It was observed that PEG decreases alpha for water while it does not change pi* and beta appreciably in the range of the molecular weight and compositions studied.     

Complexation of thallium(I) with adenosine 5'-monophosphate in aqueous methanol solutions.

The formation constants of the species formed in the systems H+ + thallium(I) + AMP and H+ + AMP have been determined in aqueous solutions of methanol at 25 degrees C and constant ionic strength 0.1 mol dm(-3) sodium perchlorate, using spectrophotometric and potentiometric techniques. Thallium(I) forms two mononuclear 1:1 complexes with AMP of the type TlHL and TlL- in the pH range of study (1-11), where L2- represents the fully dissociated ligand. The formation constants in various media were analyzed in terms of Kamlet and Taft's parameters. Single-parameter correlation of the formation constants, beta111, and beta101, versus alpha (hydrogen-bond donor acidity), beta (hydrogen-bond accepter basicity), and for pi* (dipolarity/polarizability) are relatively poor in all solutions, but multi-parameter correlation represents significant improvement with regard to the single-parameter models. Finally, the results are discussed in terms of the effect of the solvent on complexation.     

Effects of organic modifiers on retention mechanism and selectivity in micellar electrokinetic capillary chromatography studied by linear solvation energy relationships

The effects of six organic modifiers (urea, methanol, dioxane, tetrahydrofuran, acetonitrile and 2-propanol) on the retention mechanism and separation selectivity of the bulk buffer in micellar electrokinetic capillary chromatography (MECC) with sodium dodecyl sulfate (SDS) micelles as pseudo-stationary phase have been investigated through linear solvation energy relationships (LSERs). It is found that the retention value in MECC systems with or without organic modifier is primarily dependent on the solvophobic interaction and the hydrogen bonding interaction with the solute as proton acceptor, while the dipolar interaction and the hydrogen bonding interaction with the solute as proton donor play minor roles. The effects of the organic modifiers on the solvophobic, dipolar and hydrogen bonding interactions are evaluated in terms of the relationship between regression coefficient of the LSER equations and the modifier concentration. The variations of the solvophobic interaction and the dipolar interaction with change of the modifier concentration can be approximately explained using the solubility parameter and the dipolarity/polarizability parameter of the organic modifier, respectively. However, the relationships between the hydrogen bond acidity and basicity of the bulk buffer and the organic modifiers are rather complicated. Those results may be caused from the displacement of organic modifiers to the water adsorbed on the micellar surface as well as changes in the acidity and basicity of the bulk buffer with the addition of organic modifiers. In addition, it is found that the phase ratio is influenced significantly by the use of organic modifier.     

Structural Properties Governing Retention Mechanisms on Immobilized Artificial Membrane (IAM) HPLC Columns

The aims of this study were to investigate whether three commercially available immobilized artificial membrane (IAM) HPLC columns yield collinear data for neutral compounds, and whether IAM scales are distinct from the log P_oct (partition coefficient in the octanol/H₂O system) scale. With these objectives, the retention mechanisms on the IAM HPLC columns were analysed by linear solvation free‐energy relationships (LSERs). A set of 68 neutral model compounds with known solvatochromic parameters and log P_oct values was investigated, allowing a regular and broad exploration of property space. The resulting solvatochromic equations clearly indicate that the three IAM stationary phases retain small neutral solutes by a balance of intermolecular forces closely resembling those underlying partitioning in octanol/H₂O and retention on a reversed‐phase LC‐ABZ HPLC column. For all systems, the solute's size and hydrogen‐bond‐acceptor basicity are the two predominant factors, whereas dipolarity/polarisability and hydrogen‐bond‐donor acidity play only minor roles.     

Determination of Solvatochromic Regression Coefficients for the Molybdenum(VI) Complex with Ethylenediamine‐N,N′‐diacetic Acid by Using Kamlet‐Abboud‐Taft Equation

The Solver, Microsoft Excel 2000 powerful optimization package, has been used to perform non‐linear least‐squares curve fitting on the basis of Gauss‐Newton method for the calculation of solvatochromic regression coefficients for the complexation of molybdenum(VI) with ethylenediamine‐N,N′‐diacetic acid and dissociation constants at 25°C and constant ionic strength 0.1 mol·L⁻¹ sodium perchlorate in different aqueous solutions of methanol. A combination of potentiometric and UV spectrophotometric methods have been used for experimental studies. Non specific and specific solute‐solvent interactions were interpreted by correlating the equilibrium data with solvent parameters using the Kamlet‐Abboud‐Taft solvatochromic equation. Finally the influence of the solvent on the stability of the complex was discussed on the basis of the correlation results and the contribution of α (hydrogen‐bond donor acidity), β (hydrogen‐bond acceptor basicity) and π* (dipolarity/polarizability) parameters.     

Characterization of some functionalized RP-HPLC phases by the use of linear solvation energy relationships

The linear solvation energy relationship equation developed by Abraham and coworkers was applied to the retention factors k of a series of 20 polar solutes on four chemically different RP-HPLC phases. Three of them were specially synthesized and are functionalized with ether, phenylsulfide or phenylsulfoxide groups. Their retention properties are compared with those of a nonpolar octadecylsiloxane (ODS) phase. The phase properties r, the excess molar refraction; s, the dipolarity; a and b, the hydrogen-bond basicity and acidity; and v, the cavity factor show significant differences on the four phases and are used here to suggest a classification of stationary phases based on the type of interactions that are important for the retention. The hydrophilic system properties r, s, a and b are the reason for different elution orders of a set of solutes on the four phases. The intrinsic hydrophobicity of the system, the v/A ratio (A is the surface coverage in μmol/m²), shows a dependence on the mobile phase composition as do the normalized phase properties r/v, s/v, a/v and b/v. Averaging the constants over a large span of mobile phase composition should be done very carefully. The LSER model is used to predict the elution order on the stationary phases for five phenols which show coelution on ODS. On the phenylsulfide phase they are resolved. Received: 3 December 1998 / Revised: 1 February 1999 / Accepted: 8 February 1999     

Evaluation of the retention dependence on the physicochemical properties of solutes in reversed-phase liquid chromatographic linear gradient elution based on linear solvation energy relationships

This paper describes the results of the evaluation of retention dependence on the physicochemical properties of solutes in linear gradient elution by reversed-phase liquid chromatography (RPLC) based on linear solvation energy relationships (LSERs). Retention time data on Inertsil ODS(3) column by linear gradient elution were collected for both acetonitrile-water and methanol-water binary mobile phases under various gradient steepness. Based on the LSERs, the retention times were linearly correlated with the physicochemical properties (size, dipolarity, and hydrogen bond donor-acceptor acidity and basicity) of solutes. As predicted by LSERs, very acceptable linear relationships are observed for both mobile phases. While the magnitudes of the coefficients are modified by the gradient steepness, their signs are consistent with those obtained by isocratic elution. As obtained for isocratic elution, the dominant factors to retention in linear gradient elution of RPLC are the solutes' size and hydrogen bond acceptor basicity. The conclusions of the study allow us to predict retention in chromatographic method development by gradient elution.     

Retention properties of acetone-water mobile phases on a biphenylsiloxane-bonded silica stationary phase in reversed-phase liquid chromatography

The solvation parameter model system constants and retention factors were used to interpret retention properties of 39 calibration compounds on a biphenylsiloxane-bonded stationary phase (Kinetex biphenyl) for acetone-water binary mobile phase systems containing 30–70% v/v. Variation in system constants, phase ratios, and retention factors of acetone-water binary mobile phases systems were compared with more commonly used acetonitrile and methanol mobile phase systems. Retention properties of acetone mobile phases on a Kinetex biphenyl column were more similar to that of acetonitrile than methanol mobile phases except with respect to selectivity equivalency. Importantly, selectivity differences arising between acetone and acetonitrile systems (the lower hydrogen-bond basicity of acetone-water mobile phases and differences in hydrogen-bond acidity, cavity formation and dispersion interactions) could be exploited in reversed-phase liquid chromatography method development on a Kinetex biphenyl stationary phase.     

Interactions between 33 solutes and four cyano-containing stationary phases: gas chromatographic activity coefficients and the solvation parameter model

Infinite-dilution gas–liquid chromatographic activity coefficients at 393.15 K (with their thermal and athermal components) and derived excess partial molar Gibbs energies, enthalpies, and entropies have been determined for each of 33 solutes of different polarity on four stationary phases with cyano groups, using retention data taken from the literature. The strongest interactions predicted by the solvation model are the dipolarity/polarizability, the acidic solute–basic stationary phase interaction, and nonpolar cavity formation and dispersion. These interactions were compared with those evaluated from the solute activity coefficients; the effect of the solute connectivity index and dipole moment on nonpolar and polar interactions, respectively, is discussed. The dependence of the thermal activity coefficient on nonpolar interactions, and the influence of stationary phase polarity on the four solute–stationary phase interactions, were evaluated. The nonpolar interaction increases with increasing connectivity and with increasing athermal activity coefficient. The dipolarity/polarizability interaction increases with increasing solute dipole moment. Finally, polar interactions increase with increasing stationary phase polarity whereas the nonpolar interaction is independent of stationary phase polarity.