Effect of nano cadmium sulfide on combustion and thermal decomposition of polystryene and poly(methyl methacrylate)

Cadmium sulfide nano particles, both hollow spheres (CdS‐HS) and rods (CdS‐NR), were synthesized by ultrasonic and solvothermal processes, respectively, and characterized by XRD and SEM. The effect of the two kinds of nano particles on flammability was investigated using the cone calorimeter and microscale combustion calorimeter. The incorporation of small amount of CdS nano particles (1 wt.%, 3 wt.%, 5 wt.%) leads to a reduction in the peak heat release rate (PHRR) compared to pristine PS; CdS‐NR is more efficient in reducing the PHRR. CdS nano particles are less effective in reducing the PHRR of PMMA. Thermal stability of PS/CdS and PMMA/CdS nanocomposites was studied by TGA. The TGA results show that the addition of the nano particles mainly increases thermal stability of PS and PMMA at high temperatures. Copyright © 2014 John Wiley & Sons, Ltd.     

反式丁戊橡胶改性航空轮胎侧胶的结构与性能

采用反式-1,4-丁二烯-异戊二烯共聚橡胶（简称反式丁戊橡胶,TBIR）改性航空轮胎侧胶[天然橡胶（NR）/顺丁橡胶（BR）（质量比80/20）],研究了NR/BR/TBIR混炼胶的结晶行为、力学性能、硫化特性及硫化胶的物理机械性能、动态力学性能和填料分散性.结果表明,相比NR/BR并用胶,结晶性TBIR的并用赋予NR/BR/TBIR混炼胶较高的格林强度和杨氏模量.NR/BR/TBIR混炼胶工艺正硫化时间延长,交联密度提高.TBIR用量范围内,NR/BR/TBIR硫化胶300%定伸应力提高7%,耐屈挠疲劳性能提高35%~50%,滚动阻力降低.m（NR）/m（BR）/m（TBIR）为80/10/10硫化胶具有更好的综合力学性能及耐热氧老化性能.随着硫化时间的延长,NR/BR/TBIR（80/10/10）硫化胶较NR/BR（80/20）硫化胶100%定伸应力提高18%以上,NR/BR体系的耐屈挠疲劳性降低近60%,而NR/BR/TBIR（80/10/10）体系仍能保持原来的50%;反映滚动阻力的60℃损耗因子降低8%~14%,反映抗湿滑性的0℃损耗因子保持不变.填料分散度得到改善,填料聚集体尺寸降低.NR/BR/TBIR（80/10/10）硫化胶具有更好的耐长时间硫化的特性.     

纳米SiO2增强NR/HDPE共混型热塑性弹性体的研究

以动态硫化法制备纳米二氧化硅(SiO2)改性天然橡胶／高密度聚乙烯(NR／HDPE)共混型热塑性弹性体。研究了纳米SiO2对NR／HDPE弹性体力学、耐热变形、耐溶剂和热塑性能的影响，并用SEM分析了弹性体的断面形貌。结果表明：纳米SiO2通过细化交联NR分散相，改善了NR与HDPE的相容性，两相界面粘结强度明显提高。当纳米SiO2质量分数为0．03时，NR／HDPE弹性体的综合性能最好。     

Fly ash particles and precipitated silica as fillers in NR/CR vulcanizates under thermal and thermal‐oil ageing

The loading effect of precipitated silica (PSi) and fly ash‐based silica (FASi) on mechanical properties of natural rubber/chloroprene (NR/CR) under thermal and thermal‐oil ageing was investigated with variation in NR content in the NR/CR blends. The selected results were compared with vulcanized NR/nitrile rubber (NR/NBR) blends. The cure time of CR vulcanizate was found to decrease with increasing NR content, but increased with silica fillers. The Mooney viscosity for CR vulcanizates reduced with increasing NR content. The addition of NR had no effect on tensile modulus and tensile strength for the FASi filled NR/CR, but the opposite trend was observed for the PSi filled NR/CR. The post‐curing effect was more significant in PSi filled NR/CR than in FASi filled NR/CR. The tensile strength of the NR/CR vulcanizates was slightly reduced after thermal ageing especially at high NR content, more extreme reduction being found by thermal‐oil ageing. The elongation at break of NR/CR with both silica fillers ranged from 400 to 900%. The hardness results were similar to the tensile modulus. The addition of PSi in NR/CR considerably increased the tear strength, but less pronounced effect was found for FASi. The resilience properties of NR/CR tended to decrease with increasing silica content. The compression set became poorer when NR content was increased. The PSi showed higher improvement in compression set than the FASi. The effects of silica and ageing on the mechanical properties for NR/CR vulcanizates were similar to those for NR/NBR vulcanizates. Copyright © 2009 John Wiley & Sons, Ltd.     

协效阻燃聚丙烯的阻燃性能

本文研究了以聚磷酸铵(APP)为主阻燃剂,次磷酸铝(AHP)和三聚氰胺氰尿酸盐(MCA)为辅阻燃剂的协效阻燃体系对聚丙烯(PP)阻燃性能的影响。 采用垂直燃烧测试、极限氧指数(LOI)测试、热重分析、锥形量热仪测试、扫描电子显微镜分析等技术手段对所制备的阻燃样品进行了阻燃性能分析。 结果表明:单独添加任一质量分数30%阻燃剂,均不能使PP获得良好的阻燃性能;当阻燃剂总质量分数保持在30%,m(APP)：m(AHP)：m(MCA)=4：1：1时获得理想阻燃效果,此时阻燃PP的LOI为33%,垂直燃烧测试达到V-0级,热释放速率峰值(PHRR)从765.7 kW/m²降为122.7 kW/m²。     

In situ silica reinforcement of methyl methacrylate grafted natural rubber by sol–gel process

In situ silica reinforcement of natural rubber (NR) grafted with methyl methacrylate (MMA) (MMA-GNR) was achieved via the sol–gel reaction of tetraethoxysilane (TEOS) by the use of solid rubber and latex solutions. Silica contents within the MMA-GNR as high as 48 and 19 phr were obtained when using the solid rubber and latex solutions, respectively, under optimum conditions. The conversion efficiency of TEOS to silica was close to 95%. The in situ formed silica MMA-GNR/NR composite vulcanizates were prepared. MMA-GNR/NR composite vulcanizates reinforced with the in situ formed silica prepared by either method had similar mechanical properties to each other, but a shorter cure time and higher mechanical properties than those reinforced with the commercial silica at 9 phr. The TEM micrographs confirmed that the in situ formed silica particles were well dispersed within the MMA-GNR/NR composite matrix, whilst the commercial silica particles showed a significant level of agglomeration and a lower level of dispersion.     

Enhancement of mechanical properties of natural rubber with maleic anhydride grafted liquid polybutadiene functionalized graphene oxide

An effective procedure has been developed to synthesize the functionalized graphene oxide grafted by maleic anhydride grafted liquid polybutadiene(MLPB-GO). Fourier transform spectroscopy and X-ray photoelectron spectroscopy indicate the successful functionalization of GO. The NR/MLPB-GO composites were then prepared by the co-coagulation process. The results show that the mechanical properties of NR/MLPB-GO composites are obviously superior to those of NR/GO composites and neat NR. Compared with neat NR, the tensile strength, modulus at 300% strain and tear strength of NR composite containing 2.12 phr MLPB-GO are significantly increased by 40.5%, 109.1% and 85.0%, respectively. Dynamic mechanical analysis results show that 84% increase in storage modulus and 2.9 K enhancement in the glass transition temperature of the composite have been achieved with the incorporation of 2.12 phr MLPB-GO into NR. The good dispersion of GO and the strong interface interaction in the composites are responsible for the unprecedented reinforcing efficiency of MLPB-GO towards NR.     

Influence of different curing systems on the physico-mechanical properties and stability of SBR and NR rubbers

The physical properties of radiation, sulfur and peroxide-cured styrene–butadiene rubber (SBR) and natural rubber (NR) were compared. The dependence of the mechanical properties of the radiation-vulcanized SBR and NR on the coagent concentration and radiation dose was studied. The effect of thermal aging on the mechanical properties of the different rubber formulations was discussed. The radiation-cured formulations of SBR have superior mechanical properties and thermal stability compared with those of the chemically vulcanized compounds. Whereas, the radiation-cured formulations of NR have similar mechanical properties but superior thermal stability (based on the % change in E after thermal aging), when compared with those of the sulfur-vulcanized compounds and slightly better than those of the peroxide-vulcanized compounds.     

Molecular Structures and Mechanical Properties of Microbe Rapid Coagulation Natural Rubber

In this work,molecular structures,dynamic mechanical properties and glass transition temperatures of microbe coagulated natural rubber(NR) samples were analyzed by using pyrolysis gas chromatography-mass spectrometry(py-GC/MS),rubber process analyzer(RPA) and dynamic mechanical thermal analysis(DMA).And the cross-linked network structures and mechanical properties of the corresponding NR vulcanizates were further determined by using nuclear magnetic resonance(NMR) crosslink density spectrometer(XLDS-15) and universal testing machines.The results show that NR raw rubber produced by rapidly coagulated with microorganism exhibits a simple molecular structure composition and good dynamic mechanical properties,and the corresponding NR vulcanizates possess the aggregation structure of high cross-linked density,a high glass transition temperature of-61.5 ℃ and high mechanical properties(tensile strength reaches 25.2 MPa),as compared with that coagulated with acetic acid.     

接枝和交联对纳米SiO_2改性NR/PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅(SiO2)改性天然橡胶/聚丙烯共混型热塑性弹性体(NR/PP TPE).研究了马来酸酐/苯乙烯/过氧化二异丙苯(MAH/St/DCP)多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响,并用SEM分析了TPE的断面形貌.结果表明:纳米SiO2和MAH/St/DCP的最佳质量分数分别为0.03和0.0375/0.0188/0.00375时,MAH/St/DCP接枝、交联改性NR/PP/纳米SiO2TPE的力学性能、耐溶剂性能和耐热变形性能最佳.MAH/St/DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联,使NR与PP两相界面结合强度明显提高,NR/PP TPE的综合性能得到明显的改善.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

Reinforcement of compatibilized NR/NBR blends by fly ash particles and precipitated silica

Effects of precipitated silica (PSi) and silica from fly ash (FA) particles (FASi) on the cure and mechanical properties before and after thermal and oil aging of natural rubber (NR) and acrylonitrile–butadiene rubber (NBR) blends with and without chloroprene rubber (CR) or epoxidized NR (ENR) as a compatibilizer have been reported in this paper. The experimental results suggested that the scorch and cure times decreased with the addition of silica and the compound viscosity increased on increasing the silica content. The mechanical properties for PSi filled NR/NBR vulcanizates were greater than those for FASi filled NR/NBR vulcanizates in all cases. The PSi could be used for reinforcing the NR/NBR vulcanizates while the silica from FA was regarded as a semi‐reinforcing and/or extending filler. The incorporation of CR or ENR enhanced the mechanical properties of the NR/NBR vulcanizates, the ENR being more effective and compatible with the blend. The mechanical properties of the NR/NBR vulcanizates were improved by post‐curing effect from thermal aging but deteriorated by the oil aging. Copyright © 2008 John Wiley & Sons, Ltd.     

微波处理和溶胶凝胶法共同改性废胶粉及其与天然橡胶复合材料性能的研究

采用微波处理打断废胶粉(WRP)的三维网状结构用来提高WRP在有机溶剂中的溶胀性,然后采用溶胶凝胶法,将微波改性后的WRP浸入正硅酸乙酯中,通过水解反应和缩合反应,在WRP表面原位生成SiO2网络,从而制得改性废胶粉(MWRP).将制得MWRP与天然橡胶(NR)共混,制备了NR/MWRP复合材料,研究了NR/MWRP复合材料的性能.通过热重分析仪、差示扫描量热仪和力学分析表明微波处理最佳时间是20 s.由于微波处理提高了NR与WRP的相容性,原位生成的SiO2粒子起到了补强作用,所以所制备的NR/MWRP复合材料拥有较好的力学性能;随着Si69的加入,抑制了SiO2粒子聚集,提高了SiO2粒子的分散性,从而进一步提高复合材料的力学性能并降低复合材料的Payne效应;在进行频率扫描时,硫化胶的储存模量随频率的增大而增大;硫化胶的温度扫描结果表明,随着温度的升高,复合材料中SiO2粒子聚集程度加剧并且复合材料出现老化的现象.为了提高复合材料的耐老化性能,N,N-间苯撑双马来酰亚胺(BMI)作为一种防老剂加入复合材料中,BMI利用Diels-Aider反应补偿橡胶在老化过程中所损失的交联键并提高NR与WRP的界面相容性,从而提高复合材料的耐老化性能.     

稻壳基二氧化硅/碳复合材料的表面改性及对天然橡胶的影响

以稻壳基二氧化硅/碳复合材料(SiCB)作为天然橡胶(NR)的补强填料, 采用表面化学改性的方法将天然乳胶(NRL)接枝到SiCB表面, 改善其与NR基体的相容性. 研究了不同处理方法对接枝NRL效率的影响, 以及填料填入NR后对硫化橡胶力学性能的影响. 结果表明, 经过硝酸和γ-(甲基丙烯酰氧)丙基三甲氧基硅烷(γ-MPTMS)预处理, NRL能高效接枝在SiCB表面, 得到的样品SiCB_MR10比未处理的SiCB_P有更强的补强能力. 硫化胶NR/SiCB_MR10的拉伸强度、 300%定伸和撕裂强度较NR/SiCB_P分别提高了61.06%, 27.15%和15.90%, 与传统炭黑产品N774填充的硫化胶NR/N774的力学性能相近. 经过NRL接枝改性的SiCB_MR10具有替代商业炭黑的应用前景.     

Strain‐induced crystallization and mechanical properties of functionalized graphene sheet‐filled natural rubber

The effects of functionalized graphene sheets (FGSs) on the mechanical properties and strain‐induced crystallization of natural rubber (NR) are investigated. FGSs are predominantly single sheets of graphene with a lateral size of several hundreds of nanometers and a thickness of 1.5 nm. The effect of FGS and that of carbon black (CB) on the strain‐induced crystallization of NR is compared by coupled tensile tests and X‐ray diffraction experiments. Synchrotron X‐ray scattering enables simultaneous measurements of stress and crystallization of NR in real time during sample stretching. The onset of crystallization occurs at significantly lower strains for FGS‐filled NR samples compared with CB‐filled NR, even at low loadings. Neat‐NR exhibits strain‐induced crystallization around a strain of 2.25, while incorporation of 1 and 4 wt % FGS shifts the crystallization to strains of 1.25 and 0.75, respectively. In contrast, loadings of 16 wt % CB do not significantly shift the critical strain for crystallization. Two‐dimensional (2D) wide angle X‐ray scattering patterns show minor polymer chain alignment during stretching, in accord with previous results for NR. Small angle X‐ray scattering shows that FGS is aligned in the stretching direction, whereas CB does not show alignment or anisotropy. The mechanical properties of filled NR samples are investigated using cyclic tensile and dynamic mechanical measurements above and below the glass transition of NR. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Morphology and mechanical and viscoelastic properties of natural rubber and styrene butadiene rubber latex blends

The morphology and mechanical and viscoelastic properties of a series of blends of natural rubber (NR) and styrene butadiene rubber (SBR) latex blends were studied in the uncrosslinked and crosslinked state. The morphology of the NR/SBR blends was analyzed using a scanning electron microscope. The morphology of the blends indicated a two phase structure in which SBR is dispersed as domains in the continuous NR matrix when its content is less than 50%. A cocontinuous morphology was obtained at a 50/50 NR/SBR ratio and phase inversion was seen beyond 50% SBR when NR formed the dispersed phase. The mechanical properties of the blends were studied with special reference to the effect of the blend ratio, surface active agents, vulcanizing system, and time for prevulcanization. As the NR content and time of prevulcanization increased, the mechanical properties such as the tensile strength, modulus, elongation at break, and hardness increased. This was due to the increased degree of crosslinking that leads to the strengthening of the 3‐dimensional network. In most cases the tear strength values increased as the prevulcanization time increased. The mechanical data were compared with theoretical predictions. The effects of the blend ratio and prevulcanization on the dynamic mechanical properties of the blends were investigated at different temperatures and frequencies. All the blends showed two distinct glass‐transition temperatures, indicating that the system is immiscible. It was also found that the glass‐transition temperatures of vulcanized blends are higher than those of unvulcanized blends. The time–temperature superposition and Cole–Cole analysis were made to understand the phase behavior of the blends. The tensile and tear fracture surfaces were examined by a scanning electron microscope to gain an insight into the failure mechanism. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2189–2211, 2000     

Improving properties of natural rubber/polyamide 12 blends through grafting of diacetone acrylamide functional group

The aim of the present study was to improve the compatibility in blends of natural rubber (NR) and polyamide 12 (PA12) by grafting NR with hydrophilic monomer, diacetone acrylamide (DAAM), via seeded emulsion polymerization. The increase in polarity of NR after grafting modification was confirmed by a considerable increase in the polar component of its surface energy. Blends of graft copolymers of NR and poly(diacetone acrylamide) prepared using 10 wt% of DAAM (NR‐g‐PDAAM10) and PA12 were prepared at a 60/40 blend ratio (wt%) using simple blend and dynamic vulcanization techniques. The mechanical and rheological properties of the resulting blends were subsequently investigated and compared with those of the corresponding blends based on unmodified NR. The results show that dynamic vulcanization led to a significant increase in both mechanical and rheological properties of the blends. It was also observed that the dynamically cured NR‐g‐PDAAM10/PA12 blend had smaller particle size of vulcanized rubber dispersed in the PA12 matrix than observed for the dynamically cured NR/PA12 blend. This is due to the compatibilizing effect of DAAM groups present in NR‐g‐PDAAM10 molecule, which decreases the interfacial tension between the two polymeric phases. Therefore, it can be stated that the interfacial adhesion between NR and PA12 was improved by the presence of DAAM groups in NR molecule. This was reflected in the higher tensile properties observed in the dynamically cured NR‐g‐PDAAM10/PA12 blend. Copyright © 2017 John Wiley & Sons, Ltd.     

Electron beam crosslinked gels—Preparation,characterization and their effect on the mechanical,dynamic mechanical and rheological properties of rubbers

Electron beam (EB) crosslinked natural rubber (NR) gels were prepared by curing NR latex with EB irradiation over a range of doses from 2.5 to 20 kGy using butyl acrylate as sensitizer. The NR gels were systematically characterized by solvent swelling, dynamic light scattering, mechanical and dynamic mechanical properties. These gels were introduced in virgin NR and styrene butadiene rubber (SBR) matrices at 2, 4, 8 and 16 phr concentration. Addition of the gels improved the mechanical and dynamic mechanical properties of NR and SBR considerably. For example, 16 phr of 20 kGy EB-irradiated gel-filled NR showed a tensile strength of 3.53 MPa compared to 1.85 MPa of virgin NR. Introduction of gels in NR shifted the glass transition temperature to a higher temperature. A similar effect was observed in the case of NR gel-filled SBR systems. Morphology of the gel-filled systems was studied with atomic force microscopy. The NR gels also improved the processability of the virgin rubbers greatly. Both the shear viscosity and the die swell values of EB-irradiated gel-filled NR and SBR were lower than their virgin counterparts as investigated by capillary rheometer.     

Mechanical properties of glassy polymers with controlled NP spatial organization

Industrially viable processes enabling effective control of nanoparticle (NP) spatial organization in polymers are vitally important for achieving potential of nano-composites as building blocks of dynamic composites. Here, we report on the small and large strain mechanical properties of glassy polymers with spatial organization of spherical NPs controlled by the balance of the (polymer-NP)/(NP-solvent) interfacial attraction and mixing conditions. While strong polymer-NP attraction yielded good NP dispersion regardless of the mixing rate, weak polymer-NP attraction and low shear rate mixing resulted in chain bound NP clusters. Polymers with individually dispersed NPs exhibited the largest elastic moduli and strength while polymers filled with deformable chain bridged NP clusters possessed the largest ductility, at the same NP content. Hybrid systems, consisting of chain bridged NP clusters embedded in a polymer with individually dispersed NPs, exhibited simultaneous enhancement of stiffness, strength and ductility with its extent tunable by the cluster content. Our results confirm the pivotal role of NP spatial organization in translating the nano- and micro-scale phenomena to macro-scale mechanical response of polymer nano-composites. The obtained knowledge enables the design of additive fabrication technologies capable of employing polymer nano-composites in manufacturing of lightweight, functional engineering structures.     

Preparation and mechanical properties of water-dispersible hyperbranched polymer grafted carbon black/natural rubber composites by latex blending method

In order to improve the mechanical properties of rubber-matrix composites, carboxyl-terminated hyperbranched poly (2-hydroxypropane-1,2,3-tricarboxylic acid) grafted carbon black (CB-g-CTHBP) was prepared, and it could be stably dispersed in water for up to 90 days. CB-g-CTHBP dispersion and natural rubber latex were blended to obtain NR/CB-g-CTHBP, and the effect of CB-g-CTHBP content on the mechanical properties of composites was discussed. The results show that the dispersibility and wettability of CB-g-CTHBP to composites are significantly improved after grafting hyperbranched polymer onto the surface. Compared with the composite filled with NR/CB, when the amount of filler is 30 phr, tensile strength, tear strength, and shore A hardness of NR/CB-g-CTHBP increase by 54.78%, 55.13%, and 20.96%, respectively. Moreover, CB-g-CTHBP could disperse more evenly in the natural rubber-matrix, and the interaction between CB-g-CTHBP and rubber-matrix could further enhance in the composite.