THE STUDIES OF THE CURING OF AN EPOXY RESIN ON COPPER WIRE BY FTIR EXTERNAL REFLECTION SPECTROSCOPY

The epoxy coating on copper wire has been studied by a modified sampling technique using Fourier transform infrared (FTIR) diffuse reflectance attachment. As the wire axis was parallel to the incident plane, a reflection spectrum of thin layer coating on a copper wire can be obtained. The study found that imidszole, especially the acetic acid treated imidazole, can be used as an effective curing catalyst of the epoxy resin on copper. This is the first report about the IR study of coatings on metal wires.     

SELF-ASSEMBLED MICRO-DOMAINS ON THE UPPERMOST SURFACE OF FLUORINATED POLY（CARBONATE URETHANE）S WITH FLUORINATED SIDE CHAIN ATTACHED ON HARD SEGMENTS

The surface phase separated structure of polyurethanes is always desired due to the advantage of better biocompatibility, compared with the homogeneous one. The key issue is how to control and characterize the surface morphology. In this work, we report the uppermost surface morphology of fluorinated poly(carbonate urethane)s with fluorinated side chains attached to hard segments as studied by AFM, XPS and contact angle measurement. A self-assembled micro-domain with the fluorinated side chain standing up on the uppermost surface has been proposed for polyurethane with higher fluorinated content, based on the result obtained     

NOVEL HYPERBRANCHED POLY（PHENYLENE OXIDE）S WITH PHENOLIC TERMINAL GROUPS： EFFECTS OF REACTION TIME AND CORE MOLECULES ON THE MOLECULAR WEIGHT AND POLYDISPERSITY

A novel hyperbranched poly（phenylene oxide） （HPPO） with phenolic terminal groups was prepared from 4-bromo-4＇,4＂-dihydroxytriphenylmethane as AB2 monomer in dimethylsulfoxide （DMSO） via a modified Ullmann reaction. The molecular weight and polydispersity （PD） of the resulting polymers increased with increasing reaction time. In the presence of core molecules （bisphenol A and 1,3,5-trihydroxybenzene）, which have the similar molecular backbones to the reactive monomer, the molecular weight could be controlled by varying the core-to-monomer ratio. Incorporation of a very small amount of core molecules could lead to a higher molecular weight as compared with that without the addition of core molecules. However, when the core content reached certain extent, the molecular weight would decrease with the further increase in the core content. A new similar behavior of control over the PD was also obtained. The resulting polymers were characterized by ^1H-NMR, ^13C-NMR, FT-IR, and GPC.     

SYNTHESIS OF HYPERBRANCHED CONJUGATIVE POLY（ARYLENEETHYNYLENE）S BY ALKYNE POLYCYCLOTRIMERIZATION

A series of new hyperbranched poly(aryleneethynylene)s are synthesized by the copolycyclotrimerizations oftetraynes(Ⅰand Ⅱ)with aliphatic monoynes(A-C)catalyzed by tantalum-,niobium-,and cobalt-based catalysts.All thereactions proceed smoothly and soluble polymers of high molecular weights(M_w up to 3.8×10~4)are obtained in high yields(up to 97%).     

STUDY ON THE DETERMINATION OF TRACE BISMUTH（III） BY THIN-LAYER RESIN PHASE S PECTROPHOTOME TRY

In this paper, a new thin-layer ion-exchange resin phase analytical method is introduced. It is based on that, the bismuthous cation can associate with iodic anions, so as to formed an anion complex [BiI4-_] in a strong acidic environments. This anion complex can also exchanges with a weaker anions on the surface active site of anion exchange resin, so that a[R+] [Bil4-] solid phase binary associational system is produced. Owing to the solid system is a great many dispersive particulates, it can be pressed to a thin-layer by press tools of the so called “thin-layer resin phase “ or “resin phase “, and using this solid association system spectrophotometry for the determination of trace metals. So it can increase the analytical sensitivity. This association system exhibits maximum absorbance at 460nm, and obeys Beer‘s law over the concentration range 0.0lug/ml-l.20ug/ml of bismuthous(lll), h has a molar absorptivity of 7.1×l^5 [L/mol.cm]. it indicated the resin phase spectrophotometry is a sensitive analytical method for trace bismuthous. It is 18 times higher than routine aqueous spectrophotometry. The relative standard deviations is 1.82% (n=6) for the F fmeasurements of 0.Sug/ml Bi(llO. The detection limit of Bismuthous(lll) is 1.4 XlO~mol/L. The method has applied to the analysis Bi(lll) in environmental water samples.     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

RAMAN SPECTROSCOPIC STUDY ON THE CHAIN CONFORMATION OF ELECTROSYNTHESIZED POLY（p-PHENYLENE） FILMS

Poly（p-phenylene） （PPP） films have been electrochemically deposited on mirrorlike stainless steel （SS） electrode surfaces by direct oxidation of benzene in boron trifluoride diethyl etherate （BFEE） solutions at a constant applied potential of 1.7 V （versus Ag/AgCl）. The chain conformations of as-grown PPP films have been studied by Raman spectroscopy. The results demonstrated that high synthesis temperature favors the formation of planar PPP, and the conformation of planar PPP can be changed into torsional PPP by cooling treatment.     

CRYSTAL AND MOLECULAR STRUCTURE OF A NEW ISOMER OF THE COMPLEX W2S4[S2P（OEt）2]2

<正> C8H20O4P2S8W2, Mr = 866. 37, monoclinic, space group P21/ n, α= 10. 122(2),b=12. 813(3),c=18. 267(3) A ;β=90. 25(1)°;7 = 2639(2) A3;Z=4; Dc=2. 43gcm-3;λ(Mo Kα) = 0. 71069A ,μ= 110. 80cm-1,F(000) = 1624,final R = 0. 039 for 2906 observed reflections with I≥3σ(I). The tungsten atom in W2S4[S2P (OEt)2]2 is coordinated by five sulfur atoms,forming a square pyramid. Two WS5 units are linked together by sharing a S-S edge.     

EFFECT OF AMPHIPHILIC POLY （STYRENE-B-ETHYLENE OXIDE） DIBLOCK COPOLYMER INTERCALATED LAYERED SILICATE AS FILLER ON ACRYLONITRILE-BUTADIENE-STYRENE RESIN

The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray diffraction, transmission electron microscopy, stress-strain measurements in elongation.