Molecularly Imprinted Polymers on Chloromethyl Polystyrene Resin Prepared via RAFT Polymerization

Surface molecularly imprinted polymers (SMIP) was prepared via the reversible addition-fragmentation chain transfer (RAFT) polymerization on the chloromethyl polystyrene resin (CPR) in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.     

Fabrication of triple-shelled hollow spheres with optical properties via RAFT polymerization

<正>The triple-shelled hollow spheres with optical properties were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization.After removal the core templates of the poly(styrene),the hollow silica spheres were obtained.The coating process of poly(methyl methacrylate)(PMMA) on the hollow silica spheres surface via surface RAFT polymerization was performed subsequently.The polymers coated on the hollow spheres surfaces were end-functionalized by trithiocarbonate,and they were used as RAFT agent to proceed the chain extension polymerization using Tb complex as monomer.The samples were characterized by FT-IR,SEM and luminescence spectroscopy respectively.The results indicated that the triple-shelled hollow spheres had been prepared successfully and the average diameter of the hollow core was about 1μm.     

Molecularly Imprinted Polymers on Chloromethyl Polystyrene Resin Prepared v/a RAFT Polymerization

Surface molecularly imprinted polymers （SMIP） was prepared via the reversible addition-fragmentation chain transfer （RAFT） polymerization on the chloromethyl polystyrene resin （CPR） in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.     

Synthesis of Hydrophobically Modified Poly（acrylic acid） gels and Interaction of the gels with Cationic／Anionic Surfactants

Poly(acrylic acid)(PAA) gel network with only chemical crosslinking and hydorophobically modified PAA(HM-PAA)gels with both chemical and physical crosslinking were synthesized by radical polymerization in tert-butanol,using ethylene glycol dimethacrylate (EGDMA) as crossliker,and 2-(N-ethylperfluorooctanesulfoamido)ethyl methacrylate (FMA),stearyl acrylate (SA) or lauryl acrylate (LA) as Hydrophobic comonomer respectively.The effcet of the fractions and the species of the hydrophobes on swelling properties of HM-PAA gels and the interaction of gels and surfactants were studied.The results showed that the swelling ratio of HM-PAA gels exhibited a sharp decrease with increasing hydrophobic comomomer comcentration,Which Could be sacribed to the formation of strong hydrophobic association among hydrophobic groups.It was proved that two kinds of binding mechanisms of surfactan/gel and different kinds of hydrophobic clusters existed in gels containing both physical and chemical networks.     

SYNTHESIS AND CHARACTERIZATION OF HYPERBRANCHED VINYL POLYMERS FROM RAFT POLYMERIZATION OF AN ASYMMETRIC DIVINYL MONOMER

Hyperbranched vinyl polymers were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of a styrenic asymmetric divinyl monomer.This was achieved by using cumyl dithiobenzoate or S-dodecyl-S′- (α,α′-dimethyl-α″-acetic acid)trithiocarbonate as the chain transfer agent,1,1′-azobis(cyclohexanecarbonitrile) or thermal initiation as a source of radicals.Cross-linking was inhibited by a rapid RAFT-based equilibrium between active propagation chains and dormant species,and thus a h...     

EFFECTS OF L-PHENYLALANINE ON THE RADIATION SYNTHESIS OF POLY(N,N''''-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE)(MICRO)GELS

The effects of L-phenylalanine(L-Phe)on the synthesis of poly(N,N'-methylenebisacrylamide-co-4-vinylpyridine) (poly(Bis-co-4-VP))(micro)gels by γ-ray irradiation were studied.The addition of L-Phe could not only decrease the gelation dose(D_g)of the synthesis obviously,but also transform the morphology of copolymer from microgel to gel.In addition,the swelling ability of the(micro)gels was also affected in the presence of L-Phe.The decrease of D_g was ascribed to the effect of pH,while the transformation of the morphology was ascribed to the effect of L-Phe on the stability of the poly(Bis-co-4-VP)microgel.Such an effect was confirmed further as compared with the effects of L-alanine,L-glutamic acid,L-arginine,sulfuric acid and aqueous ammonia.     

Effect of Temperature-responsive Solution Behavior of PNIPAM-bPPEOMA-b-PNIPAM on Its Inclusion Complexation with α-Cyclodextrin

The effect of temperature-responsive solution behavior of PNIPAM-b-PPEOMA-b-PNIPAM on its inclusion complexation with α-cyclodextrin was studied. The triblock polymer was prepared by reversible addition-fragmentation chain transfer(RAFT) polymerization and formed inclusion complexes(ICs) after selective threading of the PEO segment of the triblock polymer through the cavities of α-CD units. For comparison, PPEOMA homopolymer was prepared and the inclusion complexation with α-CD was also studied. The ICs were prepared with α-CD when the polymer was in different conformations by changing the temperature, and the formed ICs were characterized by XRD, 1H-NMR, TGA and DSC. The solutions of the ICs show temperature-responsive clear/turbid transition or fluidic emulsion/gel transition depending on the concentration of the α-CD added, and the stoichiometry determined by 1H-NMR and TGA indicates that the stoichiometry of EO to α-CD of the resulted ICs increases with increasing of temperature.     

CROSS-LINKING OF CHITOSAN WITH GLUTARALDEHYDE IN THE PRESENCE OF CITRIC ACID——A NEW GELLING SYSTEM*

The procedure for preparing a new type of uniform and porous chitosan gel from citric acidmedium is described. Its swelling behavior in different media was compared with those of the gels preparedby other methods. The ultrastructure of the xerogel prepared from citric acid was characterized using electronmicroscopy (SEM).     

EFFECTS OF L-PHENYLALANINE ON THE RADIATION SYNTHESIS OF POLY （N,N＇-METHYLENEBIS A CR YLAMIDE-co-4-VINYLPYRID INE） （MICRO）GELS

The effects of L-phenylalanine （L-Phe） on the synthesis ofpoly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） （micro）gels by γ-ray irradiation were studied. The addition of L-Phe could not only decrease the gelation dose （Dg） of the synthesis obviously, but also transform the morphology of copolymer from microgel to gel. In addition, the swelling ability of the （micro）gels was also affected in the presence of L-Phe. The decrease of Dg was ascribed to the effect of pH, while the transformation of the morphology was ascribed to the effect of L-Phe on the stability of the poly（Bis-co-4-VP） microgel. Such an effect was confirmed further as compared with the effects of L-alanine, L-glutamic acid, L-arginine, sulfuric acid and aqueous ammonia.     

Synthesis of amphiphilic tri-block copolymerpoly(vinylpyrrolidone)-b-poly(methyl methacrylate)-b-poly(vinylpyrrolidone) for the modification of polyethersulfone membrane

Well-defined amphiphilic tri-block copolymer PVP-b-PMMA-b-PVP was prepared for the first time via successive reversible addition fragmentation chain transfer(RAFT) polymerization using carboxyl-terminated trithiocarbonate as the RAFT agent.The structure of the copolymer was characterized using FTIR,GPC and ~1H NMR.The block copolymer could be directly blended with polyethersulfone(PES) as a macromolecule additive using N-methyl-2-pyrrolidone(NMP) as the solvent to prepare membranes. The water contact angles for the modified membranes decreased obviously,and therefore,the protein adsorption amount on the membrane surface decreased.     

Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

Grafting of molecularly imprinted polymers from the surface of silica gel particles via reversible addition-fragmentation chain transfer polymerization: A selective sorbent for theophylline

Molecularly imprinted polymers (MIPs) were grafted successfully from the surface of silica gel particles via surface initiated reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized silica gel as the chain transfer agent. The intrinsic characteristics of the controlled/living polymerization mechanism of RAFT allowed for the effective control of the grafting process. Thus the grafting copolymerization of methacrylic acid and divinyl benzene in the presence of template theophylline led to thin MIP film coating silica gel (MIP-Silica). The thickness of MIP film prepared in this study is about 1.98 nm, which was calculated from the nitrogen sorption analysis results. Measured binding kinetics for theophylline to the MIP-Silica and MIPs prepared by conventional bulk polymerization demonstrated that MIP-Silica had improved mass-transfer properties. In addition, the theophylline-imprinted MIP-Silica was used as the sorbent in solid-phase extraction to determine theophylline in blood serum with satisfactory recovery higher than 90%. Nonspecific adsorption of interfering compounds can be eliminated by a simple elution with acetonitrile, without sacrificing the selective binding of theophylline.     

Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

Preparation of core-shell molecularly imprinted polymer via the combination of reversible addition-fragmentation chain transfer polymerization and click reaction

In this paper, we demonstrated an efficient and robust route to the preparation of well-defined molecularly imprinted polymer based on reversible addition-fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne terminated RAFT chain transfer agent was first synthesized, and then click reaction was used to graft RAFT agent onto the surface of silica particles which was modified by azide. Finally, imprinted thin film was prepared in the presence of 2,4-dichlorophenol as the template. The imprinted beads were demonstrated with a homogeneous polymer films (thickness of about 2.27 nm), and exhibited thermal stability under 255°C. The as-synthesized product showed obvious molecular imprinting effects towards the template, fast template rebinding kinetics and an appreciable selectivity over structurally related compounds.     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetic modeling of two-step RAFT process for the production of novel fluorosilicone triblock copolymers

Well-defined poly(dimethylsiloxane)-b-poly(2,2,3,3,4,4,4-heptafluorobutylmethacryl-ate-b-poly(styrene) (PDMS-b-PHFBMA-b-PS) triblock copolymers were prepared by two-step reversible addition-fragmentation chain transfer (RAFT) polymerization. A comprehensive mathematical model for the two-step RAFT polymerization in a batch reactor was presented using the method of moments. The model described molecular weight, monomer conversion and polydispersity index as a function of polymerization time. Good agreements in the polymerization kinetics were achieved for fitting the kinetic profiles with the suggested model. In addition, the model was used to predict the effects of initiator concentration, chain transfer agent concentration and monomer concentration on the two-step RAFT polymerization kinetics. The simulated results showed that for the two-step RAFT polymerizations, the effects initiator concentration, chain transfer agent concentration and monomer concentration are identical and the influence degrees are different yet.     

NIPAM共聚物多孔水凝胶的光引发RAFT合成及其溶胀性能

采用光引发可逆加成-断裂链转移(RAFT)方法,在室温下先合成了链端含有三硫代碳酸酯基的大分子链转移剂聚(N,N'-二甲基丙烯酰胺)(PDMAM),然后与N-异丙基丙烯酰胺(NIPAM)、N,N'-二甲基双丙烯酰胺(BIS)交联共聚合,并通过聚乙二醇的制孔作用制得PNIPAM-g-PDMAM梳型/多孔水凝胶.采用FTI...     

Kinetic model of reversible addition fragmentation chain transfer polymerization of styrene in seeded emulsion

A detailed model describing the kinetics of living polymerization mediated by reversible addition‐fragmentation chain transfer (RAFT) in seeded emulsion polymerization is developed. The model consists of a set of population balance equations of the different radical species in the aqueous phase and in the particle phase (accounting for radical segregation) as well as for the dormant species in the particle phase. The entire population of radicals was divided into several distinguished species, based on their length and their chain end group. The model results are helpful in understanding inhibition and retardation phenomena that are typical for RAFT emulsion polymerizations. While inhibition is due to the radical loss in form of the RAFT leaving group, retardation is mostly caused by a small amount of short dormant chains in the particle phase, leading to a slight increase of radical loss via RAFT exchange with radicals entering a particle. The model results are compared to a series of experiments, using cumyl dithiobenzoate as a RAFT agent in polymerizations of styrene. The agreement between experimental and model results is good and, notably, the only parameters considered adjustable were the RAFT exchange rate coefficients. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6114–6135, 2006     

超临界CO2中苯乙烯RAFT分散聚合

以末端带有三硫代碳酸酯的聚二甲基硅氧烷(PDMS-TTC)为大分子链转移剂,在超临界CO2中通过苯乙烯的可逆加成-断裂链转移(RAFT)聚合制备了聚二甲基硅氧烷-b-聚苯乙烯(PDMS-b-PS)嵌段共聚物,对聚合反应动力学以及产物的组成、分子量和形貌等进行了表征.由于PDMS链段可溶于超临界CO2而PS链段不溶,因此在超临界CO2中制备PDMS-b-PS嵌段共聚物的过程是以嵌段共聚物自身作为分散稳定剂的RAFT分散聚合,产物为粒径较均一的球形颗粒.     

端三吡啶基聚异丙基丙烯酰胺的合成及其金属配合物

合成出三吡啶官能化的二硫代酯并以其作为链转移剂进行了异丙基丙烯酰胺(NIPAAm)的可逆加成断裂链转移(RAFT)聚合,得到分子量可控和窄分子量分布的端三吡啶基聚异丙基丙烯酰胺(tpy-PNIPAAm),聚合反应为对单体浓度的一级动力学关系.Tpy-PNIPAAm在水中既保持了与聚异丙基丙烯酰胺类似的相转变行为,又拥有三吡啶(tpy)的强络合能力.将tpy-PNIPAAm与金属核素模型进行络合得到金属配合物,所得金属配合物在水中拥有与PNIPAAm类似的相转变行为,同时tpy-PNIPAAm的金属配合物由于其两亲性,在水中可以形成纳米粒子,由于纳米粒子间的静电排斥作用,这种纳米粒子即使在高于相转变温度时,仍能稳定于水中.