Analysis of codeposited Gd2O3/SiO2 composite thin films by phase modulated spectroscopic ellipsometric technique

Tailoring of the refractive index of optical thin films has been a very fascinating as well as challenging topic for developing new generation optical coatings. In the present work a novel Gd₂O₃/SiO₂ composite system has been experimented and probed for its superior optical properties through phase modulated spectroscopic ellipsometry, spectrophotometry and atomic force microscopy. The optical parameters of the composite films have been evaluated using Tauc-Lorentz (TL) formulations. In order to derive the growth dependent refractive index profiles, each sample film has been modeled as an appropriate multilayer structure where each sub-layer was treated with the above TL parameterizations. All codeposited films demonstrated superiority with respect to the band gap and morphological measurements. At lower silica mixing compositions such as in 10-20% level, the composite films depicted superior spectral refractive index profile, band gap as well as the morphology. This aspect highlighted the fact that microstructural densifications in composite films can override the chemical compositions while deciding the refractive index and optical properties in such thin films.     

Morphological, microstructural and optical properties supremacy of binary composite films—A study based on Gd2O3/SiO2 system

Composites are pragmatic choices for tailoring the material to have a desired property. Besides, such thin films have scopes to display superior optical, microstructural and morphological properties which are otherwise not possible to obtain from the pure component films. Vapor-phase-mixed binary composite Gd₂O₃/SiO₂ thin film is one such interesting system where band gap as well as refractive index superiority is observed simultaneously under certain compositional mixings. Such and similar observations in composites cannot be explained by Moss empirical rule. Our systematic study on the microstructure of this composite system based on ellipsometry and scanning probe microscopy has satisfactorily provided the information that can explain such optical properties supremacy. Morphological measurements and its derived parameters like autocorrelation and height-height correlation functions have provided several clues that represent the superior grain structures of the composites. Besides, refractive index modeling through effective single oscillator model has strongly supported such analysis results favoring the superior microstructure in composite films.     

Optical multilayer post growth instabilities: Analyses of Gd2O3/SiO2 system in combination with scanning probe force spectroscopy

Post growth multilayer instabilities of a certain periodic Gd₂O₃/SiO₂ multilayer systems have been investigated using scanning probe force-distance spectroscopy and optical spectrophotometric techniques. In the present work, we have noticed a strong correlation between the force spectroscopic results and the spectral properties of multilayer thin films, although measurement techniques and operating principles are quite different. From the experimental analysis, it was quite evident that the instability process, which starts during the nucleation and growth stage in thin films, continues to persist at a much longer time scale under post growth conditions. During this study it has been noticed that the elastic properties of the constituent thin films, the layer geometry and the bilayer thickness have strong correlation in trickling the multilayer instabilities. Such aspects also have strong interconnections with the morphological and viscoelastic changes. It is also noticed that most of the instabilities results cannot only be explained through elastic nature of the material alone. Instead, total number of layers, the layer structures, morphological changes, corresponding stiffness and the adhesion properties of the multilayer contribute substantially to these phenomena.     

Relative performances of effective medium formulations in interpreting specific composite thin films optical properties

Several powerful effective medium formulations/approximation (EMA) and associated theories with different origins and concepts have been discussed and utilized here in order to model the experimental refractive index evolutions of ZrO₂-SiO₂ and Gd₂O₃-SiO₂ composite films with respect to their compositional mixings. Amongst these formulations, the Böttcher's generalized theory has been noticed to have more versatility and can simulate varieties of experimental observations incorporating a form factor parameter to account for the grain structure and morphology to a great extent. The refractive index modeling results of most of the available theories were compared with respect to their functional evolutions and limitations. It was noticed that at higher silica fractions (>20%) in our composite films, the effective experimental refractive index parameters have remained close to the most modeling results and Böttcher's expression has shown to fit the observable parameters very accurately. However, under low silica compositions (<20%) the refractive index values of the composite films depicted different functional evolutions. Such deviations have been attributed to the various morphological, grain structure and band gap supremacies observed in these specific composite films which are not accounted by the effective medium formulations and approximations. These observations are well supported by the atomic force microscopy results.     

Infrared optical properties of Ba(Zr0.20Ti0.80)O3 and Ba(Zr0.30Ti0.70)O3 thin films prepared by sol-gel method

Ba(Zr_xTi_1−x)O₃ (BZT) (x = 0.20 and 0.30) thin films are deposited on Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrate by sol-gel method. X-ray diffraction patterns show that the thin films have a good crystallinity. Optical properties of the films in the wavelength range of 2.5-12 μm are studied by infrared spectroscopic ellipsometry (IRSE). The optical constants of the BZT thin films are determined by fitting the IRSE data using a classical dispersion formula. As the wavelength increases, the refractive index decreases, while the extinction coefficients increase. The effective static ionic charges are derived, which are smaller than that in a purely ionic material for the BZT thin films.     

Highly efficient transparent Zn2SiO4:Mn phosphor film on quartz glass

Highly efficient transparent Zn₂SiO₄:Mn²⁺ film phosphors on quartz substrates were deposited by the thermal diffusion of sputtered ZnO:Mn film. They show a textured structure with some preferred orientations. Our film phosphor shows, for the best photoluminescence (PL) brightness, a green PL brightness of about 20% of a commercial Zn₂SiO₄:Mn²⁺ powder phosphor screen. The film shows a high transmittance of more than 10% at the red-color region. The excellence in PL brightness and transmittance can be explained in terms of the textured crystal growth with a continuous gradient of Zn₂SiO₄: Mn²⁺ crystals.     

Ellipsometric characterization of PbI2 thin film on glass

The optical properties of polycrystalline lead iodide thin film grown on Corning glass substrate have been investigated by spectroscopic ellipsometry. A structural model is proposed to account for the optical constants of the film and its thickness. The optical properties of the PbI₂ layer were modeled using a modified Cauchy dispersion formula. The optical band gap E_g has been calculated based on the absorption coefficient (α) data above the band edge and from the incident photon energy at the maximum index of refraction. The band gap was also measured directly from the plot of the first derivative of the experimental transmission data with respect to the light wavelength around the transition band edge. The band gap was found to be in the range of 2.385±0.010 eV which agrees with the reported experimental values. Urbach's energy tail was observed in the absorption trend below the band edge and was found to be related to Urbach's energy of 0.08 eV.     

Effect of sintering aid (CdCl2) on the optical and structural properties of CdZnS screen-printed film

Sulphides of zinc and cadmium have been utilized effectively in various opto-electronic devices. In the present work cadmium zinc sulphide (Cd_0.4Zn_0.6S) thin film has been deposited on ultra clean glass substrate by a simple inexpensive screen-printing method using cadmium sulphide, zinc sulphide, anhydrous cadmium chloride and ethylene glycol. Cadmium chloride has been used as sintering aid and ethylene glycol as a binder. Effect of sintering aid on the optical and structural properties of prepared cadmium zinc sulphide film has been investigated. The optical band gap (E_g) of the film has been studied by using reflection spectra in wavelength range 325–600 nm. It is found that reflection spectra suffer a drastic fall at two places, which is indicative of two band gaps of film viz. 2.38 eV and 2.9 eV corresponding to CdS and Cd_0.6Zn_0.4S, respectively. This is suggestive of the fact that cadmium zinc sulphide is a wide band gap semiconducting material. X-ray diffraction also confirms the formation of Cd_0.6Zn_0.4S composition.     

Light-induced ultrafast phase transitions in VO2 thin film

Vanadium dioxide shows a passive and reversible change from a monoclinic insulator phase to a metallic tetragonal rutile structure when the sample temperature is close to and over 68 °C. As a kind of functional material, VO₂ thin films deposited on fused quartz substrates were successfully prepared by the pulsed laser deposition (PLD) technique. With laser illumination at 400 nm on the obtained films, the phase transition (PT) occurred. The observed light-induced PT was as fast as the laser pulse duration of 100 fs. Using a femtosecond laser system, the relaxation processes in VO₂ were studied by optical pump-probe spectroscopy. Upon a laser excitation an instantaneous response in the transient reflectivity and transmission was observed followed by a relatively longer relaxation process. The alteration is dependent on pump power. The change in reflectance reached a maximum value at a pump pulse energy between 7 and 14 mJ/cm². The observed PT is associated with the optical interband transition in VO₂ thin film. It suggests that with a pump laser illuminating on the film, excitation from the d_θ,? - state of valence band to the unoccupied excited mixed d_θ,?-π* - state of the conduction band in the insulator phase occurs, followed by a resonant transition to an unoccupied excited mixed d_θ,?-π* - state of the metallic phase band.     

Influence of ZrO2 in HfO2 on reflectance of HfO2/SiO2 multilayer at 248 nm prepared by electron-beam evaporation

Influence of ZrO₂ in HfO₂ on the reflectance of HfO₂/SiO₂ multilayer at 248 nm was investigated. Two kinds of HfO₂ with different ZrO₂ content were chosen as high refractive index material and the same kind of SiO₂ as low refractive index material to prepare the mirrors by electron-beam evaporation. The impurities in two kinds of HfO₂ starting coating materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum (GDMS) technology and secondary ion mass spectrometry (SIMS) equipment, respectively. It showed that between the two kinds of HfO₂, either the bulk materials or their corresponding films, the difference of ZrO₂ was much larger than that of the other impurities such as Ti and Fe. It is the Zr element that affects the property of thin films. Both in theoretical and in experimental, the mirror prepared with the HfO₂ starting material containing more Zr content has a lower reflectance. Because the extinction coefficient of zirconia is relatively high in UV region, it can be treated as one kind of absorbing defects to influence the optical property of the mirrors.     

Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.     

Optical study of ZnP2 nanoparticles in zeolite Na-X

Nanoparticles of the II-V semiconductor (ZnP₂) were prepared and investigated. ZnP₂ nanoparticles were incorporated into zeolite Na-X matrix. Absorption, diffuse reflection (DR) and photoluminescence (PL) spectra of ZnP₂ nanoparticles were measured at the temperature of 77 K. Five bands B₁-B₅ are observed in both the DR and PL spectra demonstrating the blue shift from the line of free exciton in bulk crystal. We attribute the B₁-B₅ bands to five stable nanoparticles with size less than the size of zeolite Na-X supercage. We observed Stokes shift of the PL bands with respect to the absorption bands. This dependence of this Stokes shift on the particle size is nonmonotonic.     

Highly enhanced photoluminescence and X-ray excited luminescence of Li doped Gd2O3:Eu thin films

Transparent Li-doped Gd₂O₃:Eu³⁺ thin-film phosphors were prepared by a modified sol-gel method. The effect of the Li⁺ ions on luminescent properties of the thin film was investigated. The results indicated that incorporation of Li⁺ ions into Gd₂O₃ lattice could result in a remarkable increase on photoluminescence or X-ray excited luminescence, and the strongest emission was observed from Gd_1.84Li_0.08Eu_0.08O_3−δ film, in which the intensity was increased by a factor of 1.9 or 2.3 in comparison with that of Gd_1.92Eu_0.08O₃ film. And it could be achieved the highest intensity for sintering the Gd_1.84Li_0.08Eu_0.08O_3−δ film at 700 °C. Such a temperature is much lower than the typical solid-state reaction temperature for its powder phosphors. This kind of transparent thin-film phosphors may promise for application to micro X-ray imaging system.     

Investigation of thermal annealing effects on microstructural and optical properties of HfO2 thin films

In the present paper, we investigate the effect of thermal annealing on optical and microstructural properties of HfO₂ thin films (from 20 to 190 nm) obtained by plasma ion assisted deposition (PIAD). After deposition, the HfO₂ films were annealed in N₂ ambient for 3 h at 300, 350, 450, 500 and 750 °C. Several characterisation techniques including X-ray reflectometry (XRR), X-ray diffraction (XRD), spectroscopic ellipsometry (SE), UV Raman and FTIR were used for the physical characterisation of the as-deposited and annealed HfO₂ thin films. The results indicate that as-deposited PIAD HfO₂ films are mainly amorphous and a transition to a crystalline phase occurs at a temperature higher than 450 °C depending on the layer thickness. The crystalline grains consist of cubic and monoclinic phases already classified in literature but this work provides the first evidence of amorphous-cubic phase transition at a temperature as low as 500 °C. According to SE, XRR and FTIR results, an increase in the interfacial layer thickness can be observed only for high temperature annealing. The SE results show that the amorphous phase of HfO₂ (in 20 nm thick samples) has an optical bandgap of 5.51 eV. Following its transition to a crystalline phase upon annealing at 750 °C, the optical bandgap increases to 5.85 eV.     

Electrochemical synthesis and optical properties of ZnO thin film on In2O3:Sn (ITO)-coated glass

ZnO thin films were electrochemically deposited onto the ITO-coated glass substrate from an electrolyte consisted of 0.1 M Zn(NO₃)₂ aqueous solution at 65 ± 1 °C. A compact ZnO film with (0 0 2) preferred orientation was obtained at the applied potential of −1.3 V for 1200 s. It was also found that the morphology of the ZnO films grown at the potential of −1.3 V was characterized of single or coalescent hexagonal platelets. However, the ZnO crystals grown at the potential of −2.0 V was changed to be a bimodal size distribution. The band gap energy of the as deposited ZnO films, about 3.5 eV, was independent of both the applied potential and the deposition time, respectively. The minor amount of Zn(OH)₂ might be co-deposited with the formation of ZnO revealed by the FT-IR spectroscopy. Three strategies to improve the ZnO crystal quality based on the photoluminescence properties were proposed in the paper, which were (a) adopting the lower deposition potential, (b) increasing the deposition time at a certain potential, and (c) annealing after as-deposition, respectively.     

Characteristic properties of Y2SiO5:Ce thin films grown with PLD

Three different gases (nitrogen (N₂), oxygen (O₂) and argon (Ar)) were used as background gases during the growth of pulsed laser deposition (PLD) Y₂SiO₅:Ce thin films. A Krypton fluoride laser (KrF), 248 nm was used for the PLD of the films on silicon (Si) (1 0 0) substrates. The effect of the background gases on the surface morphology, crystal growth and luminescent properties were investigated. All the experimental parameters, the gas pressure (455 mT), the substrate temperature (600 °C), the pulse frequency (8 Hz), the number of pulses (4000) and the laser fluence (1.6±0.2) J/cm² were kept constant. The only parameter that was changed during the deposition was the ambient gas species. The surface morphology and average particle sizes were monitored with scanning electron microscopy (SEM) and atomic force microscopy (AFM). X-ray diffraction (XRD) and Auger electron spectroscopy (AES) were used to determine the crystal structure and composition, respectively. Cathodo- (CL) and photoluminescence (PL) were used to measure the luminescent intensities for the different phosphor thin films. The nature of the particles, ablated on the substrate, is related to the collisions between the ejected particles and the ambient gas particles. The CL and PL intensities also depend on the particle sizes. A 144 h (coulomb dose of 1.4×10⁴ C cm⁻²) electron degradation study on the thin films ablated in the Ar gas environment resulted in a decrease in the main CL intensity peak at 440 nm and to the development of a new very broad luminescent peak spectra ranging from 400 to 850 nm due to the growth of a SiO₂ layer on the surface.     

The influence of Co doping on the dielectric, ferroelectric and ferromagnetic properties of Ba0.70Sr0.30TiO3 thin films

Ba_0.70Sr_0.30TiO₃ (BST) thin films doped by Co (BSTC) are fabricated by sol-gel method on a Pt/Ti/SiO₂/Si substrate. A strong correlation is observed among the microstructure, dielectric, ferroelectric, ferromagnetic properties and Co concentration. The dielectric constant of BST thin films can be tailored from 343 to 119 by manipulating the Co concentration. The dielectric loss of BSTC thin films are still kept below 0.020 and the tunability is above 30% at a dc-applied electric field of 500 kV/cm. With increasing Co doping up to 10 mol%, the coexistence of ferromagnetism and ferroelectrics is found. Suitable dielectric constant, low-dielectric loss, and high tunability of this kind of thin films can be useful for potential tunable applications.     

Red electroluminescent process excited by hot holes in SrGa2S4:Ce, Mn thin film

This paper reports the first observation of red electroluminescence (EL) in SrGa₂S₄:Ce, Mn thin film. The EL spectrum consists of single broad emission band having a peak wavelength of 665 nm. The dominant EL decay time was 31 μs. The relationship between the applied voltage and the EL waveform was measured in single insulating thin film electroluminescent (TFEL) devices. An asymmetric EL waveform was observed in SrGa₂S₄:Ce, Mn TFEL devices under a rectangular applied voltage. The polarity of the EL waveform in these devices was different from the waveform in manganese-activated zinc sulfide ZnS:Mn devices. This indicates that hot holes excite the Mn²⁺ ions to cause the red EL.     

Mg substitutions in ZnO-Al2O3 thin films and its effect on the optical absorption spectra of the nanocomposite

ZnO-Al₂O₃ nanocomposite thin films were prepared by sol-gel technique. The room temperature synthesis was mainly based on the successful peptization of boehmite (AlO(OH)) and Al(OH)₃ compounds, so as to use it as matrix to confine ZnO nanoparticles. The relative molar concentrations of xZnO to (1 − x) Al₂O₃ were varied as x = 0.1, 0.2 and 0.5. The optical absorption spectra of the thin films showed intense UV absorption peaks with long tails of variable absorption in the visible region of the spectra. The ZnO-Al₂O₃ nanocomposites thin films were doped with MgO by varying its molar concentrations as y = 0.05, 0.75, 0.1, 0.125, 0.15 and 0.2 with respect to the ZnO present in the composite. The MgO doped thin films showed suppression of the intense absorption peaks that was previously attained for undoped samples. The disappearance of the absorption peaks was analyzed in terms of the crystalline features and lattice defects in the nanocomposite system. The bulk absorption edge, which is reportedly found at 3.37 eV, was shifted to 5.44 eV (for y = 0.05), 5.63 eV (for y = 0.075) and maximum to 5.77 eV (for y = 0.1). In contrast, beyond the concentration, y = 0.1 the absorption edges were moved to 5.67 eV (for y = 0.125), 5.61 eV (for y = 0.15) and to 5.49 eV (for y = 0.2). This trend was explained in terms of the Burstein-Moss shift of the absorption edges.     

Temperature dependence of magnetic properties of NiFe2O4 nanoparticles embeded in SiO2 matrix

Spinel ferrite NiFe₂O₄ nanoparticles (?25 nm) in SiO₂ matrix were prepared by sol–gel method. The phase and average crystallite size of the samples were determined by X-ray diffraction method and the particle size distributions were studied by a transmission electron microscope. Magnetic properties of the samples were investigated with different ferrite particle sizes and at various temperatures down to 10 K. Superparamagnetic properties were observed at room temperature when the particle size is less than 10 nm.In superparamagnetic state, the field dependence of magnetization follows Langevin function which was originally developed for paramagnetism. The effective anisotropy constant K_eff is found to increase significantly with the decrease in particle volume and an order of magnitude higher than that of the bulk samples when the particle size is below 5 nm due to the dominance of surface anisotropy. In case of nanosized systems, the effect of size reduction on the law of approach to saturation has also been studied in detail.