Characterization of nanoporous carbons by combining CO2 and H2 sorption data with the Monte Carlo simulations

The Monte Carlo method in its grand ensemble variant (GCMC) is used in combination with experimental data in order to characterize microporous carbons and obtain the optimal pore size distribution (PSD). In particular, the method is applied in the case of AX-21 carbon. Adsorption isotherms of CO₂ (253 and 298 K) and H₂ (77 K) up to 20 bar have been measured, while the computed isotherms resulted from the GCMC simulations for several pore widths up to 3.0 nm. For the case of H₂ at 77 K quantum corrections were introduced with the application of the Feynman-Hibbs (FH) effective potential. The adsorption isotherms were used either individually or in a combined manner in order to deduce PSDs and their reliability was examined by the ability to predict the experimental adsorption isotherms. The combined approach was found to be capable of reproducing more accurately all the available experimental isotherms.     

Search for a reliable methodology for PSD determination based on a combined molecular simulation-regularization-experimental approach: The case of PHTS materials

We present here a methodology for searching a robust pore size distribution (PSD) for adsorbent materials. The method is based on a combination of individual adsorption isotherms, obtained from Grand Canonical Monte Carlo simulations, a regularization procedure to invert the adsorption integral equation (Tikhonov regularization solved by singular value decomposition), and the needed experimental adsorption isotherm. The selection of several parameters from the available choices to start the procedure are discussed here: the size of the kernel (number of individual pores and number of experimental adsorption points to be included), the fulfillment of the Discrete Picard condition, and the L-curve criteria, all leading to find a reliable and robust PSD. The procedure is applied to plugged hexagonal templated silicas (PHTS), synthesized, and characterized in our laboratory.     

Adsorption in cylindrical pores: Mixed lattice-site/off-site Monte Carlo simulations in pores with heterogeneous wall structure

We present results of grand canonical Monte Carlo simulations of adsorption in cylindrical pores with rough surface modeled by lattice-site approach. Each site is characterized by two parameters: structural and energetic, which locally modify the structure and energy properties of the surface. There are three types of sites, randomly distributed over the wall: attractive, neutral and repulsive with respect to the smooth pore model. The results presented here show how this model affects the mechanism of adsorption and how it changes the forms of adsorption isotherm. We compare our numerical results with the experimental data of adsorption of a simple fluid (CH₄, T = 77 K) in cylindrical silica pore of diameter d = 4 nm (MCM-41 material).     

Characterization of PSD of activated carbons by using slit and triangular pore geometries

A mixed geometry model for activated carbons, representing the porous space as a collection of an undetermined proportion of slit and triangular pores, is developed, evaluated theoretically and applied to the characterization of a controlled series of samples of activated carbon obtained from the same precursor material. A method is proposed for the determination of the Pore Size Distribution (PSD) for such a mixed geometry model, leading to the unique determination of the proportion of pores of the two geometries fitting adsorption data. By using the Grand Canonical Monte Carlo (GCMC) simulation method in the continuum space, families of N2 adsorption isotherms are generated both for slit and triangular geometry corresponding to different pore sizes. The problem of the uniqueness in the determination of the PSD by fitting an adsorption isotherm using the mixed geometry model is then discussed and the effects of the addition of triangular pores on the PSD are analyzed by performing a test where the adsorption isotherm corresponding to the known PSD is generated and used as the “experimental” isotherm. It is found that a pure slit geometry model would widen the PSD and shift it to smaller sizes, whereas a pure triangular geometry model would produce the opposite effect. The slit and triangular geometry families of isotherms are finally used to the fit experimental N₂ adsorption data corresponding to a family of activated carbons obtained from coconut shells through a one-step chemical activation process with phosphoric acid in air, allowing for the determination of the micropore volume, the proportion of slit and triangular pores and the PSD corresponding to the mixed geometry. The same experimental data were fit using both the conventional slit pore model and the mixed geometry model. From the analysis of the effect of different preparation procedures on the resulting PSDs, it is concluded that the proposed mixed geometry model may probably better capture the morphology and energetics of activated carbons prepared by chemical activation under mild temperatures.     

Structural characteristics of porous polymers treated by freezing with water or acetone

The pore structure of nine polymers of different origin initial and treated in water and acetone for 24 h and then frozen by liquid nitrogen for 2 h was studied using low-temperature nitrogen adsorption. An average increase in pore volume and surface area is approximately 16 and 8%, respectively, after freezing with water and 19 and 8%, respectively, after treatment with acetone. However, for some samples, this effect is negative but for others, structural changes are significantly greater (up to 106%) than the average one. Certain treated polymers are characterized by shifted pore size distribution which is also accompanied by displacement of nitrogen adsorption energy distribution.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Comparative analysis of heterogeneous solid and soft materials by adsorption, NMR and thermally stimulated depolarisation current methods

Structural characterisation of such bio-objects as fibrinogen solution, yeast cells, wheat seeds and bone tissues has been done using two versions of cryoporometry based on the integral Gibbs-Thomson (IGT) equation for freezing point depression of pore liquids and the measurements by ¹H NMR spectroscopy (180-200 < T < 273 K) and the thermally stimulated depolarisation current (TSDC) method (90 < T < 273 K) of structured water. The IGT equation was solved using a self-consisting regularization procedure including the maximum entropy principle applied to the distribution function of pore size (PSD). Both methods give clear pictures of changes in the structural characteristics caused, e.g., by hydration and swelling of wheat seeds and yeast cells, coagulation and interaction of fibrinogen with solid nanoparticles in the aqueous media, and the human bone tissue disease.     

Ceramic membrane by tape casting and sol-gel coating for microfiltration and ultrafiltration application

Alumina membrane filters in the form of thin (0.3-0.8 mm) discs of 25-30 mm diameter suitable for microfiltration application have been fabricated by tape-casting technique. Further using this microfiltration membrane as substrate, boehmite sol coating was applied on it and ultrafiltration membrane with very small thickness was formed. The pore size of the microfiltration membrane could be varied in the range of 0.1-0.7 μm through optimisation of experimental parameter. In addition, each membrane shows a very narrow pore size distribution. The most important factor, which determines the pore size of the membrane, is the initial particle size and its distribution of the ceramic powder. The top thin ultrafiltration, boehmite layer was prepared by sol-gel method, with a thickness of 0.5 μm. Particle size of the sol was approximately 30-40 nm. The structure and formation of the layer was analysed through TEM. At 550 °C formation of the top layer was completed. The pore size of the ultrafiltration membrane measured from TEM micrograph was almost 10 nm. Results of microbial (Escherichia coli—smallest-sized water-borne bacteria) test confirm the possibility of separation through this membrane     

Modeling of heterogeneous surfaces and characterization of porous materials by extending density functional theory for the case of amorphous solids

A method of characterization of carbonaceous materials using nongraphitized carbon black as a reference is considered. The Tarazona density functional theory was applied to amorphous solids to describe nitrogen adsorption on nongraphitized carbon black. This allows us to describe energetic heterogeneity without the need to invoke any energy distribution functions. To derive the pore size distribution (PSD) of porous carbon whose pore walls are non-graphitized, we used the entropy concept in the regularization method. With this approach PSD is more well-behaved than that obtained with the usual means. We applied this new theory to study the effects of technological parameters on porous structure of a series of activated carbon.     

Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.     

Cationic starch as a precursor to prepare porous activated carbon for application in supercapacitor electrodes

Three activated carbons (ACs) for the electrodes of supercapacitor were prepared from cationic starch using KOH, ZnCl₂ and ZnCl₂/CO₂ activation. The BET surface area, pore volume and pore size distribution of the ACs were evaluated using density functional theory method, based on N₂ adsorption isotherms at 77 K. The surface morphology was characterized with SEM. Their electrochemical performance in prototype capacitors was determined by galvanostatic charge/discharge characteristics and cyclic voltammetry, and compared with that of a commercial AC, which was especially prepared for use in supercapacitors. The KOH-activated starch AC presented higher BET surface area (3332 m² g⁻¹) and larger pore volume (1.585 cm³ g⁻¹) than those of the others, and had a different surface morphology. When used for the electrodes of supercapacitors, it exhibited excellent capacitance characteristics in 30 wt% KOH aqueous electrolytes and showed a high specific capacitance of 238 F g⁻¹ at 370 mA g⁻¹, which was nearly twice that of the commercial AC.     

Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions

The use of activated carbon obtained from Euphorbia rigida for the removal of a basic textile dye, which is methylene blue, from aqueous solutions at various contact times, pHs and temperatures was investigated. The plant material was chemically modified with H₂SO₄. The surface area of chemically modified activated carbon was 741.2 m² g⁻¹. The surface characterization of both plant- and activated carbon was undertaken using FTIR spectroscopic technique. The adsorption process attains equilibrium within 60 min. The experimental data indicated that the adsorption isotherms are well described by the Langmuir equilibrium isotherm equation and the calculated adsorption capacity of activated carbon was 114.45 mg g⁻¹ at 40° C. The adsorption kinetics of methylene blue obeys the pseudo-second-order kinetic model and also followed by the intraparticle diffusion model up to 60 min. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of adsorption. The activation energy of the system was calculated as 55.51 kJ mol⁻¹. According to these results, prepared activated carbon could be used as a low-cost adsorbent to compare with the commercial activated carbon for the removal textile dyes from textile wastewater processes.     

Study on the silica hollow spheres by experiment and molecular simulation

This paper presents the synthesis, characterization and molecular simulation of the silica hollow spheres (SHSs). The SHSs have been prepared using a double-template method, in which the calcium carbonate nanoparticles (CaCO₃) serve as core templates and the cetyltrimethyl-ammonium bromide (CTAB) as wall structure-directing agents. The TEM, XRD, and nitrogen adsorption have been employed to characterize morphologies and structures of the SHSs. The experimental results indicate that the as-prepared sample has an average external diameter of about 85 nm and has occurrence of disordered mesopores in the walls. In the simulation, the SHSs have been modeled as cylindrical pore with pore size distribution according to the experimental data. A combined method of grand canonical Monte Carlo (GCMC) simulation and statistics integral equation (SIE) has been carried out to determine the pore size distribution (PSD) of the SHSs based on the experimental adsorption data of nitrogen at 77 K. The results show that the PSD simulated data are in a good agreement with the experiment, which means that the proposed model for the SHSs is reliable and the combined method of GCMC and SIE is powerful for evaluation of the PSD of the silica hollow spheres.     

Adsorption of Al on the Si(0 0 1) surface

The first-principles calculations have been presented to study the adsorption of aluminum (Al) on the Si(0 0 1)(2×1) surface. We have investigated the optimized geometries and electronic structures of the adatom-substrate system. The adsorption energy of the system has been calculated. The most stable adsorption sites were consequently determined to be HH site and T3+T4. It is shown that the Si-Si dimer is asymmetric on the reconstructed bare surface and become symmetric upon Al adsorption. In addition, the bond length of Si-Si was found to be considerably elongated in the adsorption system. It is found that the work function change obtained in our work is different from other previous results on the adsorption of alkali metals on the Si(0 0 1) surface. In order to investigate the relative stability of phases at different coverages, the surface formation energy of the adsorption system was calculated. To shed light on the nature of the Al-Si bond and the character of silicon surface, the density of states (DOS) and difference charge density of the system were evaluated.     

Preparation and hydrogen storage of activated rayon-based carbon fibers with high specific surface area

Activated carbon fibers were prepared from rayon-based carbon fibers by two step activations with steam and KOH treatments. Hydrogen storage properties of the activated rayon-based carbon fibers with high specific surface area and micropore volume have been investigated. SEM, XRD and Brunauer-Emmett-Teller (BET) were used to characterize the samples. The adsorption performance and porous structure were investigated by nitrogen adsorption isotherm at 77 K on the base of BET and density functional theory (DFT). The BET specific surface area and micropore volume of the activated rayon-based carbon fibers were 3144 m²/g and 0.744 m³/g, respectively. Hydrogen storage properties of the samples were measured at 77 and 298 K with pressure-composition isotherm (PCT) measuring system based on the volumetric method. The capacities of hydrogen storage of the activated rayon-based carbon fibers were 7.01 and 1.46 wt% at 77 and 298 K at 4 MPa, respectively. Possible mechanisms for hydrogen storage in the activated rayon-based carbon fibers are discussed.     

The kinetic MC modelling of reversible pattern formation in initial stages of thin metallic film growth on crystalline substrates

The results of kinetic MC simulations of the reversible pattern formation during the adsorption of mobile metal atoms on crystalline substrates are discussed. Pattern formation, simulated for submonolayer metal coverage, is characterized in terms of the joint correlation functions for a spatial distribution of adsorbed atoms. A wide range of situations, from the almost irreversible to strongly reversible regimes, is simulated. We demonstrate that the patterns obtained are defined by a key dimensionless parameter: the ratio of the mutual attraction energy between atoms to the substrate temperature. Our ab initio calculations for the nearest Ag-Ag adsorbate atom interaction on an MgO substrate give an attraction energy as large as 1.6 eV, close to that in a free molecule. This is in contrast to the small Ag adhesion and migration energies (0.23 and 0.05 eV, respectively) on a defect-free MgO substrate.     

Adsorption and solid phase extraction of 8-hydroxyquinoline from aqueous solutions by using natural bentonite

The nitrogen-heterocyclic compound 8-hydroxyquinoline (8HQ) is one of the components of coal tar and has a wide variety of uses in industry. Because of its toxicity for aquatic organisms and harmful effects for human health, the removal of 8HQ from aqueous solutions by adsorption onto natural bentonite was investigated in the present work. The experimental results show that the optimum pH value of 2.5 is favourable for the 8HQ adsorption. The experimental data were fitted well with the pseudo-second-order kinetic and Langmuir adsorption isotherm models at all studied temperatures. The maximum adsorption capacity obtained from the Langmuir isotherm model at 20 °C was 120.6 mg g⁻¹. The calculated thermodynamic results such as ΔG° (−24.3 kJ mol⁻¹) and ΔH° (−9.56 kJ mol⁻¹) indicate that the adsorption process is spontaneous and exothermic in nature. Solid phase extraction of 8HQ was also performed. The X-ray diffractometry (XRD), Fourier Transform Infrared (FTIR) and thermogravimetric (TG) analyses were carried out in order to confirm the 8HQ adsorption onto bentonite. According to the obtained results, natural bentonite can be a reusable and effective adsorbent for the removal of 8HQ.     

Biomass waste-derived activated carbon for the removal of arsenic and manganese ions from aqueous solutions

The goal of this study is to investigate the preparation of low-cost activated carbon from bean pods waste and to explore their potential application for the removal of heavy metals from aqueous solutions. Conventional physical (water vapor) activation was used for synthesizing the adsorbent. The obtained carbon was employed for the removal of As (III) and Mn (II) from aqueous solutions at different initial concentrations and pH values. Adsorption for both ions follows Langmuir-type isotherm, the maximum loading capacities for arsenic (III) and Mn (II) ions being 1.01 and 23.4 mg g⁻¹, respectively. According to the experimental data, it can be inferred that the basic character of the surface, i.e. the high content of basic groups, favors adsorption of ions. Arsenic adsorption capacity on the carbon obtained from agricultural waste was found to be similar to this of more expensive commercial carbons showing high adsorption capability. Regarding manganese adsorption, herein obtained carbon presented higher uptake adsorption than that of activated carbons reported in the literature.     

First-principles calculations of hydrogen molecule adsorption on Ti (0 0 0 1)-(2 × 1) surface

Adsorption of H₂ molecule on the Ti (0 0 0 1)-(2 × 1) surface was studied by density functional theory with generalized gradient approximation (GGA). The parallel and vertical absorption cases were investigated in detail by adsorption energy and electronic structure analysis, we obtained three stable configurations of FCC-FCC (the two H atoms adsorption on the two adjacent fcc sites of Ti (0 0 0 1) surface, respectively), HCP-HCP (the two H atoms adsorption on the two adjacent hcp sites of Ti (0 0 0 1) surface, respectively) and FCC-HCP (the one H atom adsorption on the fcc site and the other adsorption on the near hcp site) based on the six different parallel adsorption sites after the H₂ molecule dissociates. However, all the end configurations of four vertical adsorption sites were unstable, H₂ molecule was very easy to desorb from Ti surface. The H-H bond breaking and Ti-H bond forming result from the H₂ molecule dissociation. H-H bond breaking length ranges from 1.9 Å to 2.3 Å for different adsorption configurations due to the strong Ti-H bond forming. The H₂ dissociative approach and the end stable configurations formation in parallel adsorption processes are attributed to the quantum mechanics steering effects.     

Adsorption structure of germanium on the Ru(0 0 0 1) surface

Coverage-dependent adsorption energy of the Ge/Ru(0 0 0 1) growth system and the geometrical distortions of the most stable adsorption structure are investigated through first-principles calculations within density functional theory. A local minimum in adsorption energy is found to be at a Ge coverage of 1/7 monolayer with a Ru(0 0 0 1)- symmetry. Based on this stale superstructure, the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) images are simulated by means of surface local-density of states (LDOS). The results are consistent well with the STM measurements on the phase for Ge overlayer on Ru(0 0 0 1). From this stimulation, the relations between the STM images and the lattice distortion are also clarified.