Growth and characterization of nanostructured anatase phase TiO<Subscript>2</Subscript> thin films prepared by DC reactive unbalanced magnetron sputtering

Titanium dioxide thin films were deposited on three different unheated substrates by unbalanced magnetron sputtering. The effects of the sputtering current and deposition time on the crystallization of TiO₂ thin films were studied. The TiO₂ thin films were deposited at three sputtering current values of 0.50, 0.75, and 1.00 A with different deposition times of 25, 35, and 45 min, respectively. The surface morphology of the films was investigated by atomic force microscopy (AFM). The structure was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The film thickness was determined by field emission scanning electron microscopy (FE-SEM), and the optical property was evaluated with spectroscopic ellipsometry. The results show that polycrystalline anatase films were obtained at a low sputtering current value. The crystallinity of the anatase phase increases as the sputtering current increases. Furthermore, nanostructured anatase phase TiO₂ thin films were obtained for all deposition conditions. The grain size of TiO₂ thin films was in the range 10–30 nm. In addition, the grain size increases as the sputtering current and deposition time increase.     

Characterization of a thin CeO2-ZrO2-Y2O3 films electrochemical deposited on stainless steel

In this paper, we report for the first time formation of a thin CeO₂-ZrO₂-Y₂O₃ films electrodeposited on a stainless steel substrate. The samples have been characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The XRD and XPS data indicate formation of a solid solution and additional existence of Ce³⁺ states near the surface. After annealing, SEM examination has shown a microstructure formed by dispersed spherical agglomerates having a size between 20 and 60 nm.     

Observation of triangle pits in PbSe grown by molecular beam epitaxy

PbSe thin films on BaF₂ (1 1 1) were grown by molecular beam epitaxy with different selenium beam flux. Evolution of PbSe surface morphologies with Se/PbSe beam flux ratio (R_f) has been studied by atomic force microscopy and high-resolution X-ray diffraction. Growth spirals with monolayer steps on PbSe surface are obtained using high beam flux ratio, R_f ≥ 0.6. As R_f decreases to 0.3, nano-scale triangle pits are formed on the surface and the surface of PbSe film changes to 3D islands when R_f = 0. Glide of threading dislocations in 〈1 1 0〉{1 0 0}-glide system and Pb-rich atom agglomerations are the formation mechanism of spiral steps and triangle pits. The nano-scale triangle pits formed on PbSe surface may render potential applications in nano technology.     

The effects of substrate temperature on the structure, morphology and photoluminescence properties of pulsed laser deposited SrAl2O4:Eu,Dy thin films

In this study, SrAl₂O₄:Eu²⁺,Dy³⁺ thin film phosphors were deposited on Si (1 0 0) substrates using the pulsed laser deposition (PLD) technique. The films were deposited at different substrate temperatures in the range of 40-700 °C. The structure, morphology and topography of the films were determined by using X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). Photoluminescence (PL) data was collected in air at room temperature using a 325 nm He-Cd laser as an excitation source. The PL spectra of all the films were characterized by green phosphorescent photoluminescence at ∼530 nm. This emission was attributed to 4f⁶5d¹→4f⁷ transition of Eu²⁺. The highest PL intensity was observed from the films deposited at a substrate temperature of 400 °C. The effects of varying substrate temperature on the PL intensity were discussed.     

A comparative study of the physical properties of Sb2S3 thin films treated with N2 AC plasma and thermal annealing in N2

As-deposited antimony sulfide thin films prepared by chemical bath deposition were treated with nitrogen AC plasma and thermal annealing in nitrogen atmosphere. The as-deposited, plasma treated, and thermally annealed antimony sulfide thin films have been characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy, scanning electron microscopy, atomic force microscopy, UV-vis spectroscopy, and electrical measurements. The results have shown that post-deposition treatments modify the crystalline structure, the morphology, and the optoelectronic properties of Sb₂S₃ thin films. X-ray diffraction studies showed that the crystallinity of the films was improved in both cases. Atomic force microscopy studies showed that the change in the film morphology depends on the post-deposition treatment used. Optical emission spectroscopy (OES) analysis revealed the plasma etching on the surface of the film, this fact was corroborated by the energy dispersive X-ray spectroscopy analysis. The optical band gap of the films (E_g) decreased after post-deposition treatments (from 2.36 to 1.75 eV) due to the improvement in the grain sizes. The electrical resistivity of the Sb₂S₃ thin films decreased from 10⁸ to 10⁶ Ω-cm after plasma treatments.     

A simple and low temperature process for super-hydrophilic rutile TiO2 thin films growth

We investigate an environmentally friendly aqueous solution system for rutile TiO₂ violet color nanocrystalline thin films growth on ITO substrate at room temperature. Film shows considerable absorption in visible region with excitonic maxima at 434 nm. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), UV-vis, water surface contact angle and energy dispersive X-ray analysis (EDX) techniques in addition to actual photo-image that shows purely rutile phase of TiO₂ with violet color, super-hydrophilic and densely packed nanometer-sized spherical grains of approximate diameter 3.15 ± 0.4 nm, characterize the films. Band gap energy of 4.61 eV for direct transition was obtained for the rutile TiO₂ films. Film surface shows super-hydrophilic behavior, as exhibited water contact angle was 7°. Strong visible absorption (not due to chlorine) leaves future challenge to use these films in extremely thin absorber (ETA) solar cells.     

Production of amorphous tin oxide thin films and microstructural transformation induced by heat treatment

X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and high resolution transmission electron microscopy were used to study tin oxide thin films deposited on Si(100) substrates at room temperature using pulsed laser deposition techniques with a sintered cassiterite SnO₂ target and subsequently heat-treated. X-ray diffraction and scanning electron microscopy results demonstrated that the as-prepared thin films consisted of an amorphous matrix as well as plume-like features, which are shown many micropores. The thin films that were heat treated for 2 h at 150 °C had tetragonal rutile nanocrystalline SnO₂ structures. The microstructural evolution of the tin oxide thin films during the heat treatment is discussed in the paper. PACS 81.15.Fg; 73.61Jc; 81.05.Gc; 81.40.Ef     

Decomposition of thin titanium deuteride films; thermal desorption kinetics studies combined with microstructure analysis

The thermal evolution of deuterium from thin titanium films, prepared under UHV conditions and deuterated in situ at room temperature, has been studied by means of thermal desorption mass spectrometry (TDMS) and a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The observed Ti film thickness dependent morphology was found to play a crucial role in the titanium deuteride (TiD_y) film formation and its decomposition at elevated temperatures. TDMS heating induced decomposition of fine-grained thin Ti films, of 10-20 nm thickness, proceeds at low temperature (maximum peak temperature T_m about 500 K) and its kinetics is dominated by a low energy desorption (E_D = 0.61 eV) of deuterium from surface and subsurface areas of the Ti film. The origin of this process is discussed as an intermediate decomposition state towards recombinative desorption of molecular deuterium. The TiD_y bulk phase decomposition becomes dominant in the kinetics of deuterium evolution from thicker TiD_y films. The dominant TDMS peak at approx. T_m = 670 K, attributed to this process, is characterized by E_D = 1.49 eV.     

Structural and optical properties of chemically synthesized monodispersed CdCr2S4 films

Alkaline chemical synthesis of amorphous CdCr₂S₄ (CCS) thin films of different thicknesses using cadmium chloride, chromic acid, disodium salt of ethylenediaminetetra acetic acid and thiourea precursors is reported, and the structural and surface morphological properties of CCS using X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM) techniques are discussed. Films of aggregated grains with some void spaces are obtained. Change in band gap energy and electrical resistivity of CCS films are discussed as a function of film thickness. n-type conductivity is confirmed from the sign of thermally generated voltage across the cold and hot junctions.     

Laser-induced forward transfer technique for maskless patterning of amorphous V2O5 thin film

A laser-induced forward transfer technique has been applied for the maskless patterning of amorphous V₂O₅ thin films. A sheet beam of a frequency doubled (SHG) Q-switched Nd:YAG laser was irradiated on a transparent glass substrate (donor), the rear surface of which was pre-coated with a vacuum-deposited V₂O₅ 180 nm thick film was either in direct contact with a second glass substrate (receiver) or a 0.14 mm air-gap was maintained between the donor film and the receiving substrate. Clear, regular stripe pattern of the laser-induced transferred film was obtained on the receiver. The pattern was characterized using X-ray diffraction (XRD), optical absorption spectroscopy, scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDAX), atomic force microscopy (AFM), etc.     

The growth mechanism and supercapacitor study of anodically deposited amorphous ruthenium oxide films

In the present study, ruthenium oxide (RuO₂) thin films were deposited on the stainless steel (s.s.) substrates by anodic deposition. The nucleation and growth mechanism of electrodeposited RuO₂ film has been studied by cyclic voltammetry (CV) and chronoamperometry (CA). The deposited films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive analysis by X-rays (EDAX) for structural, morphological, and compositional studies. The electrochemical supercapacitor study of ruthenium oxide thin films have been carried out for different film thicknesses in 0.5 M H₂SO₄ electrolyte. The highest specific capacitance was found to be 1190 F/g for 0.376 mg/cm² film thickness.     

Electrosynthesis and characterization of CdSe thin films: Optimization of preparative parameters by photoelectrochemical technique

CdSe thin films have been electrodeposited potentiostatically onto stainless-steel and fluorine-doped tin oxide-coated glass substrates from an aqueous acidic bath using cadmium acetate ((CH₃COO)₂Cd·2H₂O) as a Cd ion source. Preparative parameters such as deposition potential, solution concentration, bath temperature, pH of the electrolytic bath and deposition time have been optimized by using photoelectrochemical (PEC) technique to obtain well adherent and uniform thin films. The electrodeposits were dark brown in colour. The films have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical absorption techniques. XRD studies reveal that films are polycrystalline, with hexagonal crystal structure. SEM shows that the films are compact, with spherical grains. Optical absorption studies reveal that the material exhibits a direct optical transition having band gap energy ∼1.72 eV. PEC study shows that the films are photoactive.     

Electrostatic spray deposited zinc oxide films for gas sensor applications

In this work, thin films of zinc oxide (ZnO) for gas-sensor applications were deposited on platinum coated alumina substrate, using electrostatic spray deposition (ESD) technique. As precursor solution zinc acetate in ethanol was used. Scanning electron microscopy (SEM) evaluation showed a porous and homogeneous film morphology and the energy dispersive X-ray analysis (EDX) confirmed the composition of the films with no presence of other impurities. The microstructure studied with X-ray diffraction (XRD) and Raman spectroscopy indicated that the ZnO oxide films are crystallized in a hexagonal wurtzite phase. The films showed good sensitivity to 1 ppm nitrogen dioxide (NO₂) at 300 °C while a much lower sensitivity to 12 ppm hydrogen sulphide (H₂S).     

Adsorption properties of Mg–Al layered double hydroxides thin films grown by laser based techniques

Powdered layered double hydroxides (LDHs) have been widely studied due to their applications as catalysts, anionic exchangers or host materials for inorganic and/or organic molecules. Assembling nano-sized LDHs onto flat solid substrates forming thin films is an expanding area of research due to the prospects of novel applications as sensors, corrosion-resistant coatings, components in optical and magnetic devices.Continuous and adherent thin films were grown by laser techniques (pulsed laser deposition – PLD and matrix assisted pulsed laser evaporation – MAPLE) starting from targets of Mg–Al LDHs. The capacity of the grown thin films to retain a metal (Ni) from contaminated water has been also explored. The thin films were immersed in an Ni(NO₃)₂ aqueous solutions with Ni concentrations of 10^?3% (w/w) (1 g/L) and 10^?4% (w/w) (0.1 g/L), respectively. X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) combined with energy dispersive X-ray analysis (EDX) were the techniques used to characterize the prepared materials.     

Chemical synthesis of nanocrystalline SnO2 thin films for supercapacitor application

Nanocrystalline SnO₂ thin films were deposited by simple and inexpensive chemical route. The films were characterized for their structural, morphological, wettability and electrochemical properties using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy techniques (SEM), transmission electron microscopy (TEM), contact angle measurement, and cyclic voltammetry techniques. The XRD study revealed the deposited films were nanocrystalline with tetragonal rutile structure of SnO₂. The FT-IR studies confirmed the formation of SnO₂ with the characteristic vibrational mode of Sn-O. The SEM studies showed formation of loosely connected agglomerates with average size of 5-10 nm as observed from TEM studies. The surface wettability showed the hydrophilic nature of SnO₂ thin film (water contact angle 9°). The SnO₂ showed a maximum specific capacitance of 66 F g⁻¹ in 0.5 Na₂SO₄ electrolyte at 10 mV s⁻¹ scan rate.     

Synthesis of molybdenum silicide by both ion implantation and ion beam assisted deposition

Two groups of Mo/Si films were deposited on surface of Si(1 0 0) crystal. The first group of the samples was prepared by both ion beam assisted deposition (IBAD) and metal vapor vacuum arc (MEVVA) ion implantation technologies under temperatures from 200 to 400 °C. The deposited species of IBAD were Mo and Si, and different sputtering Ar ion densities were selected. The mixed Mo/Si films were implanted by Mo ion with energy of 94 keV, and fluence of Mo ion was 5 × 10¹⁶ ions/cm². The second group of the samples was prepared only by IBAD under the same test temperature range. The Mo/Si samples were analyzed by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), sheet resistance, nanohardness, and modulus of the Mo/Si films were also measured. For the Mo/Si films implanted with Mo ion, XRD results indicate that phase of the Mo/Si films prepared at 400 and 300 °C was pure MoSi₂. Sheet resistance of the Mo/Si films implanted with Mo ion was less than that of the Mo/Si films prepared without ion implantation. Nanohardness and modulus of the Mo/Si films were obviously affected by test parameters.     

Preparation and characterization of electrodeposited Sb2Se3 thin films from non-aqueous media

Semiconducting Sb₂Se₃ thin films have been prepared onto the stainless steel and fluorine doped tin oxide coated glass substrates from non-aqueous media using an electrodeposition technique. The electrodeposition potentials for different bath compositions and concentrations of solution have been estimated from the polarization curves. SbCl₃ and SeO₂ in the volumetric proportion as 1:1 with their equimolar solution concentration of 0.05 M form good quality films. The films are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and optical absorption techniques. The SEM studies show that the film covers the total substrate surface with uneven surface morphology. The XRD patterns of the films obtained by varying compositions and concentrations show that the as-deposited films are polycrystalline with relatively higher grain size for 1:1 composition and 0.05 M concentration. The optical band gap energy for indirect transition in Sb₂Se₃ thin films is found to be 1.195 eV.     

Electronic transport properties and Microstructures of TiO2:Co magnetic semiconductors

TiO₂:Co thin films of high Co concentration were investigated by the high resolution transmission electron microscopy, physical property measurement system and energy dispersive X-ray. The as-deposited films are amorphous magnetic semiconductors and we did not find any Co metal particles in them. The electronic transport process in the low-temperature range below 80 K could be described by the spin-dependent variable-range-hopping process. However, after the samples were annealed at 300 °C, large amounts of Co metal particles were observed to connect each other and the films show a metallic behavior. The origin of ferromagnetism of the thin films is also discussed.     

Synthesis, characterization of chemically deposited indium selenide thin films at room temperature

Polycrystalline In₂Se₃ semiconducting thin films were prepared by using relatively simple chemical bath deposition method at room temperature by the reaction between indium chloride, tartaric acid, hydrazine hydrate and sodium selenosulphate in an aqueous alkaline medium. Various preparative conditions of thin film deposition are outlined. The as grown films were found to be transparent, uniform, well adherent and red in color. The films were characterized using X-ray diffraction (XRD), scanning electron microscopy, atomic absorption spectroscopy and energy dispersive atomic X-ray diffraction (EDAX). The XRD analysis of the film showed the presence of polycrystalline nature with hexagonal crystal structure. SEM study revels that the grains are homogenous, without cracks or pinholes and well covers the glass substrate. The optical absorption and electrical conductivity was measured. The direct optical band gap value for the films was found to be of the order of 2.35 eV at room temperature and have specific electrical conductivity of the order of 10⁻² (Ω cm)⁻¹ showing n-type conduction mechanism. The utility of the adapted technique is discussed from the view-point of applications considering the optoelectric and structural data.     

Synthesis and characterization of GaN nanowires

In this work, GaN nanowires were fabricated on Si substrates coated with NiCl₂ thin films using chemical vapor deposition (CVD) method by evaporating Ga₂O₃ powder at 1100 °C in ammonia gas flow. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscope (HRTEM) and photoluminescence (PL) spectrum are used to characterize the samples. The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure. The growth mechanism of GaN nanowires is also discussed.