Charge transfer in the atomic structure of Ge (1 0 5)

The atomic structure and charge transfer on the Ge (1 0 5) surface formed on Si substrates are studied using scanning tunneling microscopy and spectroscopy (STM and STS). The bias-dependent STM images of the whole Ge (1 0 5) facets formed on a Ge “hut” structure on Si (0 0 1) are observed, which are well explained by the recently confirmed structure model. The local surface density of states on the Ge (1 0 5) surface is measured by STS. The localization of the electronic states expected from charge transfer mechanism is observed in the dI/dV spectra. The surface band gap is estimated as 0.8-0.9 eV, which is even wider than the bulk bandgap of Ge, indicating the strong charge transfer effect to make the dangling bonds stable. The shape of normalized tunnel conductance agrees with the theoretical band structure published recently by Hashimoto et al.     

Quasi-one-dimensional structures on the Si(1 1 1) surface induced by Ba adsorption

Ba-induced quasi-one-dimensional reconstructions of the Si(1 1 1) surface have been investigated by low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). While the 3 × ‘2’ surface shows double-periodicity along the stripes in STM images consistent with half-order streaks observed in LEED patterns, no sign of the double-periodicity along the chain direction was detected for the 5 × 1 surface. The 5× stripes in STM images show internal structures with multiple rows. The two rows comprising the boundaries of a 5× stripe in the filled-state STM image are found to have 3a × √3/2 spacing across the stripe. The observation of the successive 3× and 2× spacings between the boundary rows supports a structural model proposed for the Ba-induced 5 × 1 Si reconstruction composed of honeycomb chains and Seiwatz chains. The highest coverage 2 × 8 surface does not reveal a quasi-1D row structure in STM images.     

Hydrogen-induced metallization on Ge(1 1 1) c(2 × 8)

We have studied hydrogen adsorption on the Ge(1 1 1) c(2 × 8) surface using scanning tunneling microscopy (STM) and angle-resolved photoelectron spectroscopy (ARPES). We find that atomic hydrogen preferentially adsorbs on rest atom sites. The neighbouring adatoms appear higher in STM images, which clearly indicates a charge transfer from the rest atom states to the adatom states. The surface states near the Fermi-level have been followed by ARPES as function of H exposure. Initially, there is strong emission from the rest atom states but no emission at the Fermi-level which confirms the semiconducting character of the c(2 × 8) surface. With increasing H exposure a structure develops in the close vicinity of the Fermi-level. The energy position clearly indicates a metallic character of the H-adsorbed surface. Since the only change in the STM images is the increased brightness of the adatoms neighbouring a H-terminated rest atom, we identify the emission at the Fermi-level with these adatom states.     

Barrier height imaging of Si(1 1 1)3 × 1-Ag reconstructed surfaces

We investigated the bias voltage polarity dependence of atomically resolved barrier height (BH) images on Si(1 1 1)3 × 1-Ag surfaces. The BH images were very similar to scanning tunneling microscopy (STM) images in both the empty and filled states. This similarity strongly supports the interpretation that the BH image reflects the vertical decay rate of the surface local density of states (LDOS). Differences in contrast and protrusion shapes between BH and STM images were observed. We attributed these differences to the geometric contribution to the STM image and to the improved spatial resolution of the BH image due to the lock-in technique.     

Stable reconstruction and adsorbates of InAs(1 1 1)A surface

We investigated the surface properties of InAs(1 1 1)A by low-temperature scanning tunneling microscopy (LT-STM) with atomic resolution and first-principles calculation. Very clear atom image was observed, showing that the surface reconstruction is an In-vacancy structure. We also observed two kinds of adsorbates on the surface. The first-principles calculations indicate that the In-vacancy structure is the most stable surface reconstruction under any experimental conditions, which is consistent with the LT-STM observation. Investigations of adsorption properties of an In atom, an As atom, and an As₂ molecule by the first-principles calculations imply that the observed adsorbates are an In atom and an As₂ molecule.     

Surface electronic structure of the (3 × 2) reconstruction induced by Yb on a Si(1 1 1) surface

We have investigated the electronic structure of the Yb/Si(1 1 1)-(3 × 2) surface using angle-resolved photoelectron spectroscopy. Five surface states have been identified in the gap of the bulk band projection. Among these five surface state, the dispersions of three of them agree well with those of the surface states of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. The dispersions of the two other surface states agree well with those observed on the Ca/Si(1 1 1)-(3 × 2) surface, whose basic structure is the same as that of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. Taking these results into account, we conclude that the five surface states observed in the band gap originate from the orbitals of Si atoms that form a honeycomb-chain-channel structure.     

Atomic structure of Cs layer grown on Si(0 0 1)(2 × 1) surface at room temperature

The atomic structure of Cs atoms adsorbed on the Si(0 0 1)(2 × 1) surface has been investigated by coaxial impact collision ion scattering spectroscopy. When 0.5 ML of Cs atoms are adsorbed on Si(0 0 1) at room temperature, it is found that Cs atoms occupy a single absorption site on T3 with a height of 3.18 ± 0.05 Å from the second layer of Si(0 0 1)(2 × 1) surface, and the bond length between Cs and the nearest Si atoms is 3.71 ± 0.05 Å.     

STM studies of the reconstructed Au(1 1 1) thin-film at elevated temperatures

High temperature scanning tunneling microscope (HT-STM) was used to investigate a reconstructed Au(1 1 1) film evaporated on mica. The experiment was carried out at elevated temperatures in the range of 300-500 K. A herringbone reconstruction was observed at a wide range of temperatures. However, at the highest temperatures studied a break down of the reconstruction long range order was noticed. Finally, the presence of a triangular-like reconstruction was reported. Changes in the reconstruction were explained in terms of the change in surface stress arising as a result of the tension at the gold-mica interface.     

Investigation of the Shockley surface state on clean and air-exposed Au (1 1 1)

Scanning tunneling microscopy (STM) and spectroscopy (STS) carried out in vacuum and air were used to study the electronic structure of the Au (1 1 1) surface in the range of 0.0-0.7 eV below the Fermi level. The STS experiment carried out in UHV showed the existence of the Shockley surface state (SS) located 0.48 eV below the Fermi level. STS carried out in air showed strong local maximum located 0.35 eV below the Fermi level. This maximum was ascribed to the SS shifted toward lower energy due to carbon and oxygen overlayer. To confirm that the SS could exist on the sample exposed to air we did ultraviolet photoemission spectroscopy (UPS) experiment on air-treated and clean Au (1 1 1). Our results suggest that the SS position initially measured at 0.38 eV below the Fermi level was shifted to 0.27 eV after air treatment. Additionally, the level of contamination was measured using X-ray photoelectron spectroscopy (XPS).     

Ruthenium adsorption and diffusion on the GaN(0 0 0 1) surface

We report first principles calculations to analyze the ruthenium adsorption and diffusion on GaN(0 0 0 1) surface in a 2×2geometry. The calculations were performed using the generalized gradient approximation (GGA) with ultrasoft pseudopotential within the density functional theory (DFT). The surface is modeled using the repeated slabs approach. To study the most favorable ruthenium adsorption model we considered T₁, T₄ and H₃ special sites. We find that the most energetically favorable structure corresponds to the Ru- T₄ model or the ruthenium adatom located at the T₄ site, while the ruthenium adsorption on top of a gallium atom (T₁ position) is totally unfavorable. The ruthenium diffusion on surface shows an energy barrier of 0.612 eV. The resultant reconstruction of the ruthenium adsorption on GaN(0 0 0 1)- 2×2 surface presents a lateral relaxation of some hundredth of Å in the most stable site. The comparison of the density of states and band structure of the GaN(0 0 0 1) surface without ruthenium adatom and with ruthenium adatom is analyzed in detail.     

The gold and oxygen (3 × 1) structures on W(1 1 2)

The adsorption of two very different adsorbates, gold and oxygen, induce the formation of a (3 × 1) surface structure on both W(1 1 2) and Mo(1 1 2). In spite of similar adsorbate unit cells, the surface electronic structure, derived from photoemission, exhibits pronounced differences for the two adsorbates. Indeed, both experiment and simulations indicate substantial changes in electronic structures of (1 × 1) and (3 × 1) gold overlayers supported by highly anisotropic (1 1 2) plane. We speculate that (3 × 1) is a favored periodicity in the atomic rearrangement of the (1 1 2) surfaces of molybdenum and tungsten due in part as a result of the initial state band structure of these surfaces.     

Electronic surface states on the MOVPE-prepared InGa-terminated InGaAs(1 0 0) (4 × 2)/c(8 × 2) surface

In this paper, the InGa-terminated InGaAs(1 0 0) (4 × 2)/c(8 × 2) surface was studied in detail, which turned out to be the most suitable to develop an InGaAs/GaAsSb interface that is as sharp as possible. In ultra high vacuum the InGaAs surface was investigated with low-energy electron diffraction, scanning tunneling microscopy and UV photoelectron spectroscopy employing synchrotron radiation as light source. Scanning the Γ−Δ−X direction by varying the photon energy between 8.5 eV and 50 eV, two surface states in the photoelectron spectra were observed in addition to the valence band peaks.     

First-principles calculations of hydrogen molecule adsorption on Ti (0 0 0 1)-(2 × 1) surface

Adsorption of H₂ molecule on the Ti (0 0 0 1)-(2 × 1) surface was studied by density functional theory with generalized gradient approximation (GGA). The parallel and vertical absorption cases were investigated in detail by adsorption energy and electronic structure analysis, we obtained three stable configurations of FCC-FCC (the two H atoms adsorption on the two adjacent fcc sites of Ti (0 0 0 1) surface, respectively), HCP-HCP (the two H atoms adsorption on the two adjacent hcp sites of Ti (0 0 0 1) surface, respectively) and FCC-HCP (the one H atom adsorption on the fcc site and the other adsorption on the near hcp site) based on the six different parallel adsorption sites after the H₂ molecule dissociates. However, all the end configurations of four vertical adsorption sites were unstable, H₂ molecule was very easy to desorb from Ti surface. The H-H bond breaking and Ti-H bond forming result from the H₂ molecule dissociation. H-H bond breaking length ranges from 1.9 Å to 2.3 Å for different adsorption configurations due to the strong Ti-H bond forming. The H₂ dissociative approach and the end stable configurations formation in parallel adsorption processes are attributed to the quantum mechanics steering effects.     

Scanning tunneling microscopy observation of initial growth of Sn and Ge1−xSnx layers on Ge(0 0 1) substrates

We have investigated the initial growth of Sn and Ge_1−xSn_x layers on Ge(0 0 1) surface by using scanning tunneling microscopy. After the growth of a 0.035 ML-thick Sn layer at room temperature, Sn clusters lining vertically to a dimer row was observed. In the case of the 0.035-0.018 ML-thick Sn growth at 250 °C, the characteristic surface reconstruction with the step-edge undulation like a comb was observed. In the growth of a Ge_0.994Sn_0.006 layer at 250 °C, the multilayer polynuclear growth with a lot of two-dimensional small domain was observed. These surface reconstructions should be accounted for by the large compressive stress induced in the surface layer due to the incorporation of Sn atoms.     

Structure of the SiC (0 0 0 1) 3 × 3 reconstruction studied by surface X-ray diffraction

The surface structure of the 3 × 3 reconstruction of the 4H-SiC (0 0 0 1) surface was investigated with surface X-ray diffraction (SXRD).Of the studied models, the twist model proposed by Starke et al. [U. Starke, J. Schardt, J. Bernhardt, M. Franke, K. Reuter, H. Wedler, K. Heinz, J. Furthmuller, P. Kackell, F. Bechstedt, Phys. Rev. Lett. 80 (1998) 758] gave the best fit to the experimental data. The structural parameters were determined accurately.     

STM study of the initial stages of C60 adsorption on the Pt(1 1 0)-(1 × 2) surface

We have studied the initial stages of adsorption of C₆₀ on the Pt (1 1 0)-(1 × 2) surface by means of STM. At room temperature, fullerene molecules adsorb in the troughs between two adjacent Pt rows of the missing row reconstruction. Mobility over the terraces is negligible, denoting strong bonding with the surface, also testified by a well-defined orientation of fullerene monomers with respect to the substrate. Upon annealing at 750 K, molecular migration towards kinks and step edges occurs, where small islands nucleation begins. A commensurate registry with the substrate is maintained by small (5-10 molecules) C₆₀ aggregates, leading to expanded nearest-neighbour distances with respect to those found in hexagonal close packed fullerene ad-islands grown on other metallic substrates.     

Fabrication and scanning tunneling microscopy studies of the Si(1 1 1)-(√31 × √31)-In surface

We report on the fabrication of single phase of the Si(1 1 1)-(√31 × √31)-In reconstruction surface, observed by scanning tunneling microscopy (STM) at room temperature. By depositing specific amounts of indium atoms while heating the Si(1 1 1)-(7 × 7) substrate at a critical temperature, the single phase of Si(1 1 1)-(√31 × √31)-In surfaces could be routinely obtained over the whole surface with large domains. This procedure is certified by our high-resolution STM images in the range of 5-700 nm. Besides, the high resolution STM images of the Si(1 1 1)-(√31 × √31)-In surface were also presented.     

An electrostatic force microscope study of Si nanostructures on Si(1 0 0) as a function of post-annealing temperature and time

The evolution of Si nanostructures induced by Ar⁺ ion sputtering on Si(1 0 0) was studied with electrostatic force microscopy (EFM) as a function of post-annealing temperature (T = room temperature-800 °C) and time (t = 0-160 min). The post-annealing of the nanostructure was conducted in vacuum. It was found that with T increasing, the EFM contrast degraded steadily and became nearly undetectable at T = 800 °C; with t increasing at T = 800 °C, the EFM contrast fell down steadily as well. However, the surface morphology and roughness were much less affected after annealing. The results suggest that the as-formed Si nanostructures may not be epitaxially grown on Si(1 0 0) substrate as claimed before. A plane capacitance model supported this conclusion.     

Tunneling spectra for single molecules of HEX-fluorescent dye attached to DNA adsorbed on Cu(1 1 1) surfaces

We used the scanning tunneling microscope (STM) to examine single-stranded deoxyribonucleic acid (DNA) oligomers deposited on a metal surface. Because STM can be used to study the electrical properties of materials via the tunneling spectra, we used it to visualize DNA oligomers at the single molecule resolution. The 5′-hexachloro-fluorescein phosphoramidite (HEX)-labeled oligomers (sequence, AGCTTC) were observed on an atomically flat Cu(1 1 1) surface. At large tip-sample distances at large set-point biases, the lowest unoccupied molecular orbit (LUMO) peak of the empty state can be observed for the dye molecules on the tunneling spectra. When this distance becomes small, similar spectra as for the Cu substrate were observed for the dye molecule on the LUMO-related peak. Cu gave peaks at small bias voltages in the filled state. From comparison of these peaks on each subunit of the molecules, the measured values of dI/dV on HEX were smaller to those on Cu because of the large size of the HEX molecule, but the normalized values of dI/dV/(I/V) were apparently equal. We believe that the tunneling current is able to pass through the HEX molecules to the Cu substrate, thus reflecting the density of the Cu(1 1 1) surface. Molecular size therefore affects the intensity of dI/dV. LUMO-related peaks sometimes cannot be observed for HEX because of conformational differences, but Cu peaks can almost always be observed for HEX molecules. These peaks for the counter ions are almost the same as those for the Cu substrate. Thus, tunneling spectra can assist in the molecular mapping of DNA.     

SR-PES and STM observation of metastable chemisorption state of oxygen on Si(1 1 0)-16 × 2 surface

Initial adsorption of oxygen molecules on the Si(1 1 0)-16 × 2 surface and subsequent modification of the bonding states induced by mild (300 °C) annealing have been studied by synchrotron-radiation photoemission spectroscopy and scanning-tunneling microscopy. It has been shown that upon annealing, the intensity and the energy positions of the Si 2p suboxide components shift towards the values characteristic for the thermal oxide. This indicates the presence of a metastable chemisorption state of oxygen on the Si(1 1 0)-16 × 2 surface.