Khillah extract as inhibitor for acid corrosion of SX 316 steel

The inhibitive effect of the extract of khillah (Ammi visnaga) seeds, on the corrosion of SX 316 steel in HCl solution was determined using weight loss measurements as well as potentiostatic technique. It was found that the presence of the extract reduces markedly the corrosion rate of steel in the acid solution. The inhibition efficiency increases as the extract concentration is increased. The inhibitive effect of khillah extract was discussed on the basis of adsorption of its components on the metal surface. Negative values were calculated for the energy of adsorption indicating the spontaneity of the adsorption process. The formation of insoluble complexes as a result of interaction between iron cations and khellin, which present in the extract, was also discussed.     

Enhanced corrosion resistance of mild steel in normal sulfuric acid medium by 2,5-bis(n-thienyl)-1,3,4-thiadiazoles: Electrochemical, X-ray photoelectron spectroscopy and theoretical studies

The inhibitive action of some thiadiazole derivatives, namely 2,5-bis(2-thienyl)-1,3,4-thiadiazole (2-TTH) and 2,5-bis(3-thienyl)-1,3,4-thiadiazole (3-TTH) against the corrosion of mild steel in 0.5 M H₂SO₄ solution has been investigated using weight loss measurements, Tafel polarisation and electrochemical impedance spectroscopy (EIS) techniques. The experimental results obtained revealed that these compounds inhibited the steel corrosion in acid solution. The protection efficiency increased with increasing inhibitors concentration and the ability of the molecule to adsorb on the steel surface was dependent on the position of the sulphur atom on the thienyl substituent. Inhibition efficiency values obtained from various methods employed were in reasonable agreement. Potentiodynamic polarisation studies clearly showed that 2-TTH and 3-TTH acted as mixed inhibitors. Adsorption of these inhibitors on steel surface obeyed to Langmuir adsorption isotherm. X-ray photoelectron spectroscopy and the thermodynamic data of adsorption showed that inhibition of steel corrosion in normal sulphuric solution by n-TTH is due to the formation of a chemisorbed film on the steel surface. Molecular modelling was used to gain some insight, about structural and electronic effects in relation to the inhibiting efficiencies.     

Electrochemical, theoretical and XPS studies of 2-mercapto-1-methylimidazole adsorption on carbon steel in 1 M HClO4

The inhibition of the corrosion of carbon steel in 1 M HClO₄ by 2-mercapto-1-methylimidazole (MMI) has been investigated in relation to the concentration of the inhibitor as well as the temperature using weight loss and electrochemical measurements. The effect of the temperature on the corrosion behaviour with addition of different concentrations of MMI was studied in the temperature range 30-60 °C. Polarization curves reveal that MMI is a mixed type inhibitor. The inhibition efficiency of MMI is temperature independent but increases with the inhibitor concentration. Changes in impedance parameters (charge transfer resistance, R_t, and double-layer capacitance, C_dl) were indicative of adsorption of MMI on the metal surface, leading to the formation of a protective film. Adsorption of MMI on the carbon steel surface is found to obey the Langmuir adsorption isotherm. Some thermodynamic functions of dissolution and adsorption processes were also determined. The X-ray photoelectron spectroscopy (XPS) of the carbon steel indicated that MMI is chemically adsorbed on the steel surface. Moreover, the electronic properties such as highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) energy levels and molecular orbital densities were calculated.     

The inhibited effect of some tetrazolic compounds towards the corrosion of brass in nitric acid solution

The effect of the addition of some tetrazolic type organic compounds: 1-phenyl-5-mercapto-1,2,3,4-tetrazole (PMT), 1,2,3,4-tetrazole (TTZ), 5-amino-1,2,3,4-tetrazole (AT) and 1-phenyl-1,2,3,4-tetrazole (PT) on the corrosion of brass in nitric acid is studied by weight loss, polarisation and electrochemical impedance spectroscopy (EIS) measurements. The explored methods gave almost similar results. Results obtained reveal that PMT is the best inhibitor and the inhibition efficiency (E%) follows the sequence: PMT > PT > AT > TTZ. Polarization measurements also indicated that tetrazoles acted as mixed-type inhibitors without changing the mechanism of the hydrogen evolution reaction. Partial π-charge on atoms has been calculated. Correlation between the highest occupied molecular orbital energy E_HOMO and inhibition efficiencies was sought. The adsorption of PMT on the brass surface followed the Langmuir isotherm. Effect of temperature is also studied in the (25-50 °C) range.     

Experimental and theoretical study for corrosion inhibition of mild steel in hydrochloric acid solution by some new hydrazine carbodithioic acid derivatives

The corrosion inhibition of mild steel in 0.5 M hydrochloric acid solutions by some new hydrazine carbodithioic acid derivatives namely N′-furan-2-yl-methylene-hydrazine carbodithioic acid (A), N′-(4-dimethylamino-benzylidene)-hydrazine carbodithioic acid (B) and N′-(3-nitro-benzylidene)-hydrazine carbodithioic (C) was studied using chemical (weight loss) and electrochemical (potentiodynamic and electrochemical impedance spectroscopy, EIS) measurements. These measurements show that the inhibition efficiency obtained by these compounds increased by increasing their concentration. The inhibition efficiency follow the order C > B > A. Polarization studies show that these compounds act as mixed type inhibitors in 0.5 M HCl solutions. These inhibitors function through adsorption following Langmuir isotherm. The electronic properties of these inhibitors, obtained using PM3 semi-empirical self-consistence field method, have been correlated with their experimental efficiencies using non-linear regression method.     

The corrosion inhibition and gas evolution studies of some surfactants and citric acid on lead alloy in 12.5 M H2SO4 solution

The inhibition action of the citric acid and three surfactants: sodium dodecyl sulfate (SDS), t-octyl phenoxy polyethoxyethanol (Triton X-100), sodium dodecyl benzene sulphonate (SDBS) on the corrosion behavior and gas evolution of Pb-Sb-As-Se was investigated in 12.5 M H₂SO₄ solution with linear sweep polarization, cyclic voltammetry and weight loss measurements methods. The results drawn from different techniques are comparable. It was found that these surfactants and citric acid act as good inhibitors for the corrosion of lead alloy in H₂SO₄ solution. SDS inhibited most effectively the lead alloy corrosion among the three surfactants and citric acid. The inhibition efficiency for the inhibitors decreases in the order: SDS > SDBS > Triton X-100 > citric acid > blank. The inhibition efficiency increases with rising of the inhibitor concentration. In this work, the effect of the inhibitors on hydrogen and oxygen evolution was studied. In addition, it was found that the adsorption of used inhibitors on lead alloy surface follows Langmuir isotherm.     

Corrosion inhibition of steel in sulphuric acid by pyrrolidine derivatives

Novel corrosion inhibitors, namely 1-{2-[(2-hydroxyethyl)thio]ethyl}pyrrolidin-2-one (P5) and {[2-(2-oxopyrrolidin-1-yl)ethyl]thio}acetic acid (P4), were synthesised and tested as corrosion inhibitors for steel in 0.5 M H₂SO₄. The effects of P4 and P5 are also compared to their initial reactants 1-vinylpyrrolidin-2-one (P1), 2-mercaptoethanol (P2) and mercaptoacetic acid (P3). The study was carried out by weight loss measurements, potentiodynamic polarisation, linear polarisation resistance (R_p) and electrochemical impedance spectroscopy (EIS) methods. The inhibition efficiency increases with the concentration of P5 to attain 89% at 5 × 10⁻³ M. We note good agreement between the various methods explored. Polarisation measurements show also that the pyrrolidones act essentially as cathodic inhibitors. The cathodic curves indicate that the reduction of proton at the steel surface is an activating mechanism. P4 and P5 adsorb on the steel surface according to Langmuir adsorption model. Effect of temperature is also studied in the 298-353 K range. Efficiency is explained by the theoretical studies.     

Influence of poly(aminoquinone) on corrosion inhibition of iron in acid media

The inhibitor performance of chemically synthesized water soluble poly(aminoquinone) (PAQ) on iron corrosion in 0.5 M sulphuric acid was studied in relation to inhibitor concentration using potentiodynamic polarization and electrochemical impedance spectroscopy measurements. On comparing the inhibition performance of PAQ with that of the monomer o-phenylenediamine (OPD), the OPD gave an efficiency of 80% for 1000 ppm while it was 90% for 100 ppm of PAQ. PAQ was found to be a mixed inhibitor. Besides, PAQ was able to improve the passivation tendency of iron in 0.5 M H₂SO₄ markedly.     

Pyridine–pyrazole compound as inhibitor for steel in 1 M HCl

The influence of 3,5-dimethyl-1H-pyrazole (P1), pyridine (P2) and 2-(3-methyl-1H-pyrazol-5-yl) pyridine (P3) on the corrosion inhibition of steel in molar hydrochloric acid solution is studied using weight-loss, potentiodynamic and EIS measurements. Results obtained shows that P3 is the best inhibitor and its inhibition efficiency increases with the increase of concentration to attain 89% since 10⁻³ M. Potentiodynamic polarisation studies clearly reveal that it acts essentially as a cathodic inhibitor. The inhibitor studied reduces the corrosion rates. E (%) values obtained from various methods used are in good agreement. Adsorption of P3 on steel surface has an S-shaped adsorption isotherm.     

Chemical and electrochemical investigations of high carbon steel corrosion inhibition in 10 % HCl medium by quinoline chalcones

The corrosion inhibitive effect of 3-(3-oxo-3-phenyl-propenyl)-1H-quinolin-2-one (PPQ) and 3-(3-oxo-3-phenyl-propenyl)-1H-benzoquinolin-2-one (PPBQ) on high carbon steel (HCS) in 10 % HCl media was evaluated by chemical (weight loss) and electrochemical (electrochemical impedance spectroscopy and potentiodynamic polarization technique) measurements. The inhibition efficiencies obtained from weight loss and electrochemical measurements were in good agreement. The inhibition efficiency was found to increase with the increase in inhibitor concentration but decreased with rise in temperature. Potentiodynamic polarization studies revealed the mixed mode inhibition of inhibitors. The adsorption behavior of these inhibitors on the HCS surface was found to obey the Langmuir adsorption isotherm. The thermodynamic parameter values of free energy of adsorption (?G _ads) and enthalpy of adsorption (?H _ads) revealed that the inhibitor was adsorbed on the HCS surface via both chemisorption and physisorption mechanisms. The adsorption mechanism of inhibition was supported by spectroscopic techniques (UV–visible, FT-IR, and wide-angle X-ray diffraction), surface analysis (SEM–EDS), and adsorption isotherms.     

Synergistic effect of iodide ions on the corrosion inhibition of steel in 0.5 M H2SO4 by new chalcone derivatives

The effect of addition of 4′,4-dihydroxychalcone (P₁), 4-aminochalcone (P₂) and 4-bromo, 4′-methoxychalcone (P₃) on the corrosion of steel in 0.5 M sulphuric acid has been studied by weight loss measurements, potentiodynamic and EIS measurements. We investigate the synergistic effect of iodide ions on the corrosion inhibition of steel in the presence of chalcone derivatives. The corrosion rates of the steel decrease with the increase of the chalcones concentration, while the inhibition efficiencies increase. The addition of iodide ions enhances the inhibition efficiency considerably. The presence of iodide ions increases the degree of surface coverage. The synergism parameters S_Θ and S_I, calculated from surface coverage and the values of inhibition efficiency, in the case of chalcone derivatives are found to be larger than unity. The enhanced inhibition efficiency in the presence of iodide ions is only due to synergism and there is a definite contribution from the inhibitors molecules. E (%) obtained from the various methods is in good agreement. Polarisation measurements show also that the compounds act as cathodic inhibitors.     

Inhibiting effects of some oxadiazole derivatives on the corrosion of mild steel in perchloric acid solution

The efficiency of 3,5-bis(n-pyridyl)-1,3,4-oxadiazole (n-POX, n = 1, 2, 3), as corrosion inhibitors for mild steel in 1 M perchloric acid (HClO₄) have been determined by weight loss measurements and electrochemical studies. The results show that these inhibitors revealed a good corrosion inhibition even at very low concentrations. Comparison of results among those obtained by the studied oxadiazoles shows that 3-POX was the best inhibitor. Polarisation curves indicate that n-pyridyl substituted-1,3,4-oxadiazoles are mixed type inhibitors in 1 M HClO₄. The adsorption of these inhibitors follows a Langmuir isotherm model. The electronic properties of n-POX, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR).     

Tween-40 as corrosion inhibitor for cold rolled steel in sulphuric acid: Weight loss study, electrochemical characterization, and AFM

The inhibition action of a non-ionic surfactant of tween-40 on the corrosion of cold rolled steel (CRS) in 0.5-7.0 M sulphuric acid (H₂SO₄) was studied by weight loss and potentiodynamic polarization methods. Atomic force microscope (AFM) provided the surface conditions. The inhibition efficiency increases with the tween-40 concentration, while decreases with the sulphuric acid concentration. The adsorption of inhibitor on the cold rolled steel surface obeys the Langmuir adsorption isotherm equation. Effect of immersion time was studied and discussed. The effect of temperature on the corrosion behavior of cold rolled steel was also studied at four temperatures ranging from 30 to 60 °C, the thermodynamic parameters such as adsorption heat, adsorption free energy and adsorption entropy were calculated. A kinetic study of cold rolled steel in uninhibited and inhibited acid was also discussed. The kinetic parameters such as apparent activation energy, pre-exponential factor, rate constant, and reaction constant were calculated for the reactions of corrosion. The inhibition effect is satisfactorily explained by both thermodynamic and kinetic parameters. Polarization curves show that tween-40 is a cathodic-type inhibitor in sulphuric acid. The results obtained from weight loss and potentiodynamic polarization are in good agreement, and the tween-40 inhibition action could also be evidenced by surface AFM images.     

1,3-Bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane as corrosion inhibitor for steel in 0.5 M H2SO4 solution

The effect of addition of 1,3-bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane (M = 264 g). HMPP on steel corrosion in 0.5 M sulphuric acid is studied by weight-loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements at various temperatures. The results obtained showed that HMPP acts as a good corrosion inhibitor. The inhibition efficiency increases with the bipyrazole compound to attain 88%. It acts as a mixed-type inhibitor. Trends in the increase of charge-transfer resistance and decrease of capacitance values also show the adsorption of the molecule on the metal surface. The bipyrazole adsorbs on the steel surface according to the Langmuir isotherm adsorption model. Effect of temperature indicates that inhibition efficiency decreases with temperature between 25 and 85 °C.     

Corrosion inhibition of steel in 0.5 M H2SO4 by [(2-pyridin-4-ylethyl)thio]acetic acid

The influence of [(2-pyridin-4-ylethyl)thio]acetic acid (P1) and pyridine (P2) on the corrosion inhibition of steel in sulphuric acid solution is studied using weight loss, potentiodynamic polarisation and linear polarisation resistance (R_p) and electrochemical impedance spectroscopy (EIS) measurements. Results obtained show that P1 is the best inhibitor and its inhibition efficiency (E%) increases with the increase of concentration. The highest E% of 82% is observed at 5 × 10⁻³ M. Potentiodynamic polarisation studies clearly reveal that P1 acts as a mixed inhibitor. The inhibitor studied reduces the corrosion rates. E% values obtained from various methods used are in good agreement. Adsorption of P1 on steel surface obeys to Langmuir adsorption isotherm. Effect of temperature indicates that E% decreases with temperature between 298 and 353 K.     

An electroactive co-polymer as corrosion inhibitor for steel in sulphuric acid medium

The corrosion behavior of mild steel in sulphuric acid solution containing various concentrations of a co-polymer formed between maleic anhydride and N-vinyl-2-pyrrolidone (VPMA) was investigated using weight-loss, polarization and electrochemical impedance techniques. The polymer acts as an effective corrosion inhibitor for steel in sulphuric acid medium. The inhibition process is attributed to the formation of an adsorbed film of co-polymer on the metal surface which protects the metal against corrosion. Scanning electron microscopy (SEM) studies of the metal surfaces confirmed the existence of an adsorbed film. The adsorption followed the Langmuir isotherm. The protection efficiency increased with increase in inhibitor concentration and decreased with increase in temperature and acid concentration. The thermodynamic functions of the adsorption and dissolution processes were evaluated.     

Inhibition of steel corrosion in 2 M H3PO4 by artemisia oil

Artemisia oil (Ar) is extracted from artemisia herba alba collected in Ain es-sefra-Algeria, and tested as corrosion inhibitor of steel in 2 M H₃PO₄ using weight loss measurements, electrochemical polarisation and EIS methods. The naturally oil reduces the corrosion rate. The inhibition efficiency was found to increase with oil content to attain 79% at 6 g/l. Ar acts as a cathodic inhibitor. The effect of temperature on the corrosion behaviour of steel indicates that inhibition efficiency of the natural substance decreases with the rise of temperature. The adsorption isotherm of natural product on the steel has been determined.     

Investigations of the inhibition of copper corrosion in nitric acid solutions by ketene dithioacetal derivatives

Ketene dithioacetal derivatives, namely 3-[bis(methylthio)methylene] pentane-2,4-dione (1), 3-(1,3-dithian-2-ylidene) pentane-2,4-dione (2) and 3-(1,3-dithiolan-2-ylidene) pentane-2,4-dione (3) were synthesized and their respective capacity to inhibit copper corrosion in 3 M HNO₃ was investigated by means of weight loss, potentiodynamic polarization, scanning electron microscopy (SEM) and energy dispersive X-ray fluorescence (XRF). The obtained results indicate that the addition of these compounds significantly decreases the corrosion rate. Potentiodynamic polarization studies clearly showed that the inhibition efficiency increases with increasing concentration of the investigated compounds at a fixed temperature, but decreases with increasing temperature. These results on the whole showed that the studied substances are good cathodic inhibitors for copper corrosion in nitric acid medium. SEM and energy dispersive X-ray (EDAX) examination of the copper surface revealed that these compounds prevented copper from corrosion by adsorption on its surface to form a protective film, which acts as a barrier to aggressive agents. The presence of these organic compounds adsorbed on the electrode surface was confirmed by XRF investigations.     

Understanding the adsorption of 4H-1,2,4-triazole derivatives on mild steel surface in molar hydrochloric acid

This study examines the use of some 4H-triazole derivatives, namely 3,5-diphenyl-4H-1,2,4-triazole (DHT), 3,5-bis(4-pyridyl)-4H-1,2,4-triazole (4-PHT) and 3,5-bis(4-methyltiophenyl)-4H-1,2,4-triazole (4-MTHT) for corrosion and dissolution protection of mild steel in normal hydrochloric acid solution. The inhibiting efficiency of the different additives is evaluated by means of weight loss and electrochemical techniques such as ac impedance measurements and polarisation curves. The experimental results obtained reveal that 4-MTHT is the best effective inhibitor and the inhibition efficiency is found to be in the following order: 4-MTHT > 4-PHT > DHT. The variation in inhibitive efficiency mainly depends on the type and nature of the substituents present in the inhibitor molecule. Polarisation curves show that theses triazoles are mixed-type inhibitors in 1 M HCl. The inhibition efficiency increases with 4H-triazole derivatives concentration and attains the maximum value of 99.6% in the case of 4-MTHT at 5 × 10⁻⁴ M. The results obtained from weight loss electrochemical studies were in reasonable agreement. The adsorption of 4H-triazole derivatives on the steel surface obeys to the Langmuir isotherm model. The thermodynamic data of adsorption and activation are determined and discussed. The fundamental thermodynamic functions were used to glean important information about the 4H-triazoles inhibitory behaviour. Molecular modeling was used to get better insight, about structural and electronic effects in relation to the inhibition efficiencies.     

The effect of some Schiff bases on the corrosion of aluminum in hydrochloric acid solution

The inhibition effect of Schiff bases benzylidene-(2-methoxy-phenyl)-amine (A), (2-methoxy-phenyl)-(4-methyl-benzylidene)-amine (B), (4-chloro-benzylidene)-(2-methoxy-phenyl)-amine (C) and (4-nitro-bezylidene)-(2-methoxy-phenyl)-amine (D) on the corrosion of aluminum in 1 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. It has been found that all the studied Schiff bases are excellent inhibitors. Maximum inhibition was obtained for 0.01 M Schiff base A. Results show that the inhibition efficiency increases with decreasing in temperature and increasing in concentration of Schiff base. Polarization curves reveal that the used inhibitors are mixed type inhibitors. The surface adsorption of the Schiff bases leads to a decrease of double layer capacitance as well as an increase of polarization resistance. The inhibitor performance depends strongly on the type of function groups substituted on benzene ring. The adsorption of used compounds on the aluminum surface obeys a Langmuir isotherm and has a physical mechanism. Thermodynamic parameters for both dissolution and adsorption processes were determined. The quantum chemical study of the corrosion inhibition efficiency of the Schiff bases on Al in molar HCl was carried out.