Synergistic effect of iodide ions on the corrosion inhibition of steel in 0.5 M H2SO4 by new chalcone derivatives

The effect of addition of 4′,4-dihydroxychalcone (P₁), 4-aminochalcone (P₂) and 4-bromo, 4′-methoxychalcone (P₃) on the corrosion of steel in 0.5 M sulphuric acid has been studied by weight loss measurements, potentiodynamic and EIS measurements. We investigate the synergistic effect of iodide ions on the corrosion inhibition of steel in the presence of chalcone derivatives. The corrosion rates of the steel decrease with the increase of the chalcones concentration, while the inhibition efficiencies increase. The addition of iodide ions enhances the inhibition efficiency considerably. The presence of iodide ions increases the degree of surface coverage. The synergism parameters S_Θ and S_I, calculated from surface coverage and the values of inhibition efficiency, in the case of chalcone derivatives are found to be larger than unity. The enhanced inhibition efficiency in the presence of iodide ions is only due to synergism and there is a definite contribution from the inhibitors molecules. E (%) obtained from the various methods is in good agreement. Polarisation measurements show also that the compounds act as cathodic inhibitors.     

Inhibition of iron corrosion in 0.5 M sulphuric acid by metal cations

Corrosion inhibitors are widely used in acid solutions during pickling and descaling. Mostly organic compounds containing N, O, and S groups are employed as inhibitors. In this study, the inhibition performance of metal cations such as Zn²⁺, Mn²⁺ and Ce⁴⁺ ions in the concentration range 1-10 × 10⁻³ M has been found out. The corrosion behaviour of iron in 0.5 M H₂SO₄ in the presence of metal cations is studied using polarization and impedance methods. It is found that the addition of these metal cations inhibits the corrosion markedly. The inhibition effect is in the following order Ce⁴⁺ ? Mn²⁺ > Zn²⁺.     

Corrosion inhibition of steel in sulphuric acid by pyrrolidine derivatives

Novel corrosion inhibitors, namely 1-{2-[(2-hydroxyethyl)thio]ethyl}pyrrolidin-2-one (P5) and {[2-(2-oxopyrrolidin-1-yl)ethyl]thio}acetic acid (P4), were synthesised and tested as corrosion inhibitors for steel in 0.5 M H₂SO₄. The effects of P4 and P5 are also compared to their initial reactants 1-vinylpyrrolidin-2-one (P1), 2-mercaptoethanol (P2) and mercaptoacetic acid (P3). The study was carried out by weight loss measurements, potentiodynamic polarisation, linear polarisation resistance (R_p) and electrochemical impedance spectroscopy (EIS) methods. The inhibition efficiency increases with the concentration of P5 to attain 89% at 5 × 10⁻³ M. We note good agreement between the various methods explored. Polarisation measurements show also that the pyrrolidones act essentially as cathodic inhibitors. The cathodic curves indicate that the reduction of proton at the steel surface is an activating mechanism. P4 and P5 adsorb on the steel surface according to Langmuir adsorption model. Effect of temperature is also studied in the 298-353 K range. Efficiency is explained by the theoretical studies.     

The inhibitive effect of bipyrazolic derivatives on the corrosion of steel in hydrochloric acid solution

The effect of two pyrazole-type organic compounds, namely ethyl 5,5′-dimethyl-1′H-1,3′-bipyrazole-3 carboxylate (P1) and 3,5,5′-trimethyl-1′H-1,3′-bipyrazole (P2) on the corrosion behaviour of steel in 1 M hydrochloric acid (HCl) solution is investigated at 308 K by weight loss measurements, potentiodynamic polarisation and impedance spectroscopy (EIS) methods. The inhibition efficiencies obtained from cathodic Tafel plots, gravimetric and EIS methods are in good agreement. Results obtained show that the compound P2 is the best inhibitor and its efficiency reaches 84% at 10⁻³ M. Potentiodynamic polarisation studies show that pyrazolic derivatives are cathodic-type inhibitors and these compounds act on the cathodic reaction without changing the mechanism of the hydrogen evolution reaction. The inhibition efficiency of P2 is temperature-dependent in the range from 308 to 353 K and the associated activation energy has been determined. P2 adsorbs on the steel surface according to Langmuir adsorption model. The calculation of the total partial charge of inhibitor atoms is computed.     

Influence of poly(aminoquinone) on corrosion inhibition of iron in acid media

The inhibitor performance of chemically synthesized water soluble poly(aminoquinone) (PAQ) on iron corrosion in 0.5 M sulphuric acid was studied in relation to inhibitor concentration using potentiodynamic polarization and electrochemical impedance spectroscopy measurements. On comparing the inhibition performance of PAQ with that of the monomer o-phenylenediamine (OPD), the OPD gave an efficiency of 80% for 1000 ppm while it was 90% for 100 ppm of PAQ. PAQ was found to be a mixed inhibitor. Besides, PAQ was able to improve the passivation tendency of iron in 0.5 M H₂SO₄ markedly.     

Tween-40 as corrosion inhibitor for cold rolled steel in sulphuric acid: Weight loss study, electrochemical characterization, and AFM

The inhibition action of a non-ionic surfactant of tween-40 on the corrosion of cold rolled steel (CRS) in 0.5-7.0 M sulphuric acid (H₂SO₄) was studied by weight loss and potentiodynamic polarization methods. Atomic force microscope (AFM) provided the surface conditions. The inhibition efficiency increases with the tween-40 concentration, while decreases with the sulphuric acid concentration. The adsorption of inhibitor on the cold rolled steel surface obeys the Langmuir adsorption isotherm equation. Effect of immersion time was studied and discussed. The effect of temperature on the corrosion behavior of cold rolled steel was also studied at four temperatures ranging from 30 to 60 °C, the thermodynamic parameters such as adsorption heat, adsorption free energy and adsorption entropy were calculated. A kinetic study of cold rolled steel in uninhibited and inhibited acid was also discussed. The kinetic parameters such as apparent activation energy, pre-exponential factor, rate constant, and reaction constant were calculated for the reactions of corrosion. The inhibition effect is satisfactorily explained by both thermodynamic and kinetic parameters. Polarization curves show that tween-40 is a cathodic-type inhibitor in sulphuric acid. The results obtained from weight loss and potentiodynamic polarization are in good agreement, and the tween-40 inhibition action could also be evidenced by surface AFM images.     

Inhibition of steel pitting corrosion in HCl by some inorganic anions

The effect of Mn and V content on corrosion behavior of mild steel in different concentration of HCl was investigated. The increase of Mn and V content in the steel sample leads to increasing corrosion resistance. The effect of phosphate, molybedate and chromate anions on the corrosion of steel in HCl solution has been studied using weight loss, potentiodynamic and scanning electron microscope (SEM) techniques. The addition of increasing concentrations of phosphate, molybedate and chromate anions causes a shift of the pitting potential (E_pit) in the positive direction, indicating the inhibitive effect of the added anions on the pitting attack. The phosphate anion has a stronger inhibitive effect of the pitting corrosion. The inhibition efficiency (IE) of different inhibitors increases with the increasing of phosphate concentration and decreases with the increasing the concentration of molybedate and chromate anions. The presence of these anions inhibits the pitting corrosion of steel samples in the order phosphate > molybedate > chromate. The effect of different inorganic anions on the corrosion behavior of two different composition steel samples was also studied in HCl solution.     

Characterisation of passive films formed on low carbon steel in borate buffer solution (pH 9.2) by electrochemical impedance spectroscopy

The comprehension of passivity and its protective character against corrosion is closely connected with the electronic properties of passive films. Passive films formed anodically on carbon steel in borate/boric acid solution, pH 9.2, have been characterised by electrochemical impedance spectroscopy (EIS). Mott-Schottky plots and impedance measurements were made on films formed at different potentials and times. The investigation allowed the determination of the semiconductive properties of the films. The results of the capacitance response indicate that the passive films behave like highly doped n-type semiconductors, showing that the passive film properties are dominated by iron. The value of donors density (N_D) for the passive film is of the order of 10²¹ cm⁻³ and decreases with increasing formation time and potential, indicating that defects decrease with increasing film thickness. Based on the information about the physical phenomena, an equivalent circuit is proposed to fit the experimental data, leading to determination of anodic film capacitance and film resistance.     

1,3-Bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane as corrosion inhibitor for steel in 0.5 M H2SO4 solution

The effect of addition of 1,3-bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane (M = 264 g). HMPP on steel corrosion in 0.5 M sulphuric acid is studied by weight-loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements at various temperatures. The results obtained showed that HMPP acts as a good corrosion inhibitor. The inhibition efficiency increases with the bipyrazole compound to attain 88%. It acts as a mixed-type inhibitor. Trends in the increase of charge-transfer resistance and decrease of capacitance values also show the adsorption of the molecule on the metal surface. The bipyrazole adsorbs on the steel surface according to the Langmuir isotherm adsorption model. Effect of temperature indicates that inhibition efficiency decreases with temperature between 25 and 85 °C.     

Electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy study of the corrosion behaviour of galvanized steel and electroplating steel

The efficiency of a formula containing 2-{(2-hydroxyethyl)[(4-methyl-1H-1,2,3-benzotriazol-1-yl)methyl]amino}ethanol (tolyltriazole) and decanoic acid as corrosion inhibitor for galvanized steel and electroplating steel in aqueous solution have been determined by electrochemical impedance spectroscopy (EIS) techniques. The experimental data obtained from this method show a frequency distribution and therefore a modelling element with frequency dispersion behaviour, a constant phase element (CPE) has been used. The corrosion behaviour in the presence of different concentration of decanoic acid (DA) in the formula was also investigated by EIS. Results obtained reveal that, the formula is a good inhibitor for galvanized steel and electroplating steel in aqueous solution, the better performance was obtained in the case of galvanized steel. The ability of the inhibitor to be adsorbed on the surface was dependent on the nature of metal. X-ray photoelectron spectroscopy surface analysis with inhibitor shows that it's chemisorbed at the galvanized and electroplating steel/aqueous solution interface.     

The inhibition of mild steel corrosion in acidic medium by 2,2′-bis(benzimidazole)

A new corrosion inhibitor, namely 2,2′-bis(benzimidazole) has been synthesised and its inhibiting action on the corrosion of mild steel in acidic bath (1 M HCl) has been investigated by various corrosion monitoring techniques, such as corrosion weight loss test and potentiodynamic polarisation. The results of the investigation show that this compounds have fairly good inhibiting properties for steel corrosion in hydrochloric acid, and is a mixed inhibitor in (1 M HCl). The adsorption of this inhibitor is also found to obey the Langmuir adsorption isotherm.     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Holographic interferometry as electrochemical emission spectroscopy of carbon steel in seawater with low concentration of RA-41 corrosion inhibitor

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of carbon steel in blank seawater and with seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion test (EI) spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of RA-41 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which were obtained from the EI spectroscopy. Consequently, holographic interferometric is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Effect of deformation on the electrochemical behavior of hot-dip galvanized steel sheets

The main purpose of employing pre-coated steel sheets is to minimize corrosion of steel. However, coatings can be severely affected by forming processes. In the forming processes, due to the different modes of deformation, the strain levels are different and so can affect the properties of the coatings to a varying degree. Special attention has to be paid to the influence of deformation conditions on the performance of the coating, as regards protection against corrosion. The adhesion of the coating must remain good, and the surface should not be damaged during forming. Therefore, it is necessary to study the behavior of its corrosion resistance against the deformation.In this work, effect of strain path on the corrosion behavior of hot-dip galvanized steel sheets has been studied. Corrosion behavior of hot-dip galvanized steel sheets at various strain levels has been evaluated under four different strain paths namely, biaxial, plane strain, uniaxial (drawing) and tensile modes. The sheets were deformed by a limiting dome height test (LDH) set-up. A correlation between the degree of deformation and the loss in extent of corrosion protection offered by the coating has been established by carrying out electrochemical studies such as potentiodynamic polarization and impedance spectroscopy (EIS) in 3.5% NaCl solution. The present study shows that increase in deformation increases the extent of delamination of the coating for all the modes of deformation. The severity of deformation on delamination, however, has been found to vary in the order of, tensile < uniaxial < plane < biaxial.     

Failure of thin films: Optical shearography versus electrochemical impedance spectroscopy

In the present work, the temperature versus thermal deformation (strain) with respect to time, of different coating films, was studied by a non-destructive technique (NDT) known as shearography. An organic coating, i.e., ACE Premium Enamel, on a metallic alloy, i.e., a carbon steel, was investigated at a temperature range simulating the severe weather temperatures in Kuwait, especially between the daylight and the nighttime temperatures, 20-60 °C. The investigation focused on determining the in-plane displacement of the coating, which amounts to the thermal deformation (strain) with respect to the applied temperature range. Furthermore, the investigation focused on determining the thermal expansion coefficients of coatings, the slope of the plot of the thermal deformation (strain) versus the applied temperature range. In other words, one could determine, from the decreasing value of the thermal expansion coefficients of coatings, a critical (steady state) value of the thermal expansion coefficients of coatings, in which the integrity of the coatings can be assessed with respect to time. In fact, determination of the critical (steady state) value of the thermal expansion coefficients of coatings could be accomplished independent of parameters, i.e., ultraviolet (UV) exposure, humidity, and exposure to chemical species, which normally are considered in conventional methods of assessing the integrity of coatings. Furthermore, results of shearography indicate that the technique is a very useful NDT method not only to determine the critical value of the thermal expansion coefficients of different coatings but also to be used as a 2D-microscope for monitoring the deformation of the coatings in real time at a submicroscopic scale. Also, the obtained data of the shearography technique were compared with data obtained by electrochemical impedance spectroscopy (EIS) in an aqueous solution of 3% NaCl.     

Inhibition of steel corrosion in 2 M H3PO4 by artemisia oil

Artemisia oil (Ar) is extracted from artemisia herba alba collected in Ain es-sefra-Algeria, and tested as corrosion inhibitor of steel in 2 M H₃PO₄ using weight loss measurements, electrochemical polarisation and EIS methods. The naturally oil reduces the corrosion rate. The inhibition efficiency was found to increase with oil content to attain 79% at 6 g/l. Ar acts as a cathodic inhibitor. The effect of temperature on the corrosion behaviour of steel indicates that inhibition efficiency of the natural substance decreases with the rise of temperature. The adsorption isotherm of natural product on the steel has been determined.     

Improvement of corrosion resistance of AA6061 alloy by tapioca starch in seawater

This study examines the use of tapioca starch for improvement of corrosion resistance of AA6061 alloy in seawater. Gravimetric, potentiodynamic polarization, linear polarization resistance and electrochemical impedance measurements were employed to study the corrosion behavior of AA6061 alloy in seawater. The electrochemical measurements for AA6061 alloy in seawater showed that the presence of tapioca starch significantly decreases the corrosion rates, corrosion current densities (i_corr), and double layer capacitance (C_dl), simultaneously increases the values of polarization resistance (R_p). The inhibition efficiencies increase with increasing of tapioca starch concentration. The Langmuir adsorption isotherm fits well with the experimental data. The nature of adsorption of tapioca starch on the metal surface has also been examined. The analysis of SEM and EDS confirmed the formation of precipitates of tapioca starch on the metal surface, which reduced the overall corrosion reaction.     

Inhibition of copper corrosion by bis-(1,1′-benzotriazoly)-α,ω-diamide compounds in aerated sulfuric acid solution

Three kinds of novel corrosion inhibitors, bis-(1,1′-benzotriazoly)-α,ω-succinyldiamide (BSU), bis-(1,1′-benzotriazoly)-α,ω-adipoyldiamide (BAD), and bis-(1,1′-benzotriazoly)-α,ω-azelayldiamide (BAZ) were synthesized and certified by IR and ¹H NMR. Their corrosion inhibition effects for copper in 0.5 M H₂SO₄ were evaluated by weight-loss method. It shows that among the three compounds, only BSU behaves better compared with BTA. The inhibition efficiency (IE) increased with increasing BSU concentration to 85.2% at the 5 × 10⁻⁴ M level. Polarization studies showed that BSU suppressed both anodic and cathodic corrosion reactions. The minimum energy conformation of these compounds was obtained by MM2 force field program. The two benzotriazoly moieties in BSU molecule are more parallel than in other compounds. This is benefit to increase the inhibition effects of BSU.     

The corrosion behaviour of polypyrrole coating synthesized in phenylphosphonic acid solution

Electrochemical synthesis of polypyrrole (PPy) film was achieved on mild steel (MS), in monomer containing 0.1 M phenylphosphonic acid solution. The synthesis was carried out using cyclic voltammetry technique. It was found that the electrode surface could only become completely passive, after a few successive cycles in solution of 0.1 M pyrrole + 0.1 M phenylphosphonic acid. Then, the thickness of polymer film was increased with help of successive cycles in a relatively narrower potential range. The corrosion performance of polymer coating was investigated in 3.5% NaCl solution, using electrochemical impedance spectroscopy (EIS) and anodic polarization curves. It was shown that the coating had high stability and low permeability, under such aggressive conditions. The EIS results also showed that the coating exhibited important anodic protection behaviour on mild steel. The percent protection efficiency value (E%) was found to be 98.4% and the percent total porosity value (P%) was determined to be 0.752%, after 96 h exposure time to corrosive solution.     

Modified electrochemical emission spectroscopy (MEES) As technique of NDT for detection localized corrosion of copper alloys in seawater

An early stage of localized corrosion, i.e., pitting and crevice corrosion, of a pure copper and a brass in uncoated and coated conditions in seawater was investigated in situ by a new non-destructive testing (NDT) method. The new method of localized corrosion detection is based on the optical corrosion-meter for measuring the corrosion current density (J) and on a modified electrochemical noise technique for determining the corrosion admittance (A_c) at the open-circuit potential of the alloys in solutions. The observations of localized corrosion were basically interferometric perturbations detected by the optical corrosion-meter only on the uncoated copper and the coated brass at the beginning of the tests. The interferometic perturbations interpreted as a localized corrosion in the form of an early pitting and crevice corrosion, of a depth ranging from 0.3 μm to several micrometers, of the uncoated copper and the coated brass, respectively. Also, the early stage of localized corrosion of the same alloys in the same conditions was determined in situ by a modified electrochemical noise (EN) technique, called the modified electrochemical emission spectroscopy (MEES) technique, simultaneously during the optical interferometry measurements. Determinations of localized corrosion by the MEES technique were electrochemical noise spectra detected on corrosion admittance (A_c)-time plots of the alloys in solutions. The corrosion admittance parameter, A_c=(dJ/dV), which defined the MEES technique, is capable of indicating localized corrosion and uniform corrosion activities. In this investigation, the parameter A_c was modified in which the change of the corrosion current density (dJ) was measured by the optical corrosion-meter rather than by the zero resistance ammeter, which is usually used for measuring the dJ in electrochemical noise technique. Consequently, results of the present work indicate that optical corrosion-meter as an electromagnetic method of measuring the corrosion current density, and MEES technique, as an electronic method for determining the A_c, are very useful techniques as non-destructive methods for the detection of localized corrosion at the initiation stage of the phenomenon.