Surface physical-morphological and chemical changes leading to performance enhancement of atmospheric pressure plasma treated polyester fabrics for inkjet printing

Without any preprocessing, polyester fabric has lower ability to hold on water due to the smooth morphology and chemistry property of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and easily bleed. In this paper, atmospheric pressure plasma was used to pretreat polyester fabric in order to provide an active surface for the inkjet printing. The results showed that surface-modified polyester fabrics could obtain the effects of features with enhanced color yields and excellent pattern sharpness. SEM images indicated that the rough surface of plasma treated fibers could provide more capacities for the fabric to capture inks and also facilitate the penetration of colorant particles into the polyester fabric. XPS analysis revealed that air + 50%Ar plasma introduced more oxygen-containing groups onto the fabric surface than air plasma. Although AFM images indicated that etching effects generated by air plasma treatments were more evident, the air/Ar plasma treated sample has higher K/S value and better color performance. These studies have also shown that the chemical modification of plasma appears to be relatively more significant for improving the effect of inkjet printing.     

Surface modification of porous poly(tetrafluoroethylene) film via cold plasma treatment

In this study, cold plasma technology was applied for the surface modification of porous polytetrafluoroethylene (PTFE) film to improve the hydrophilicity. The surface properties of PTFE, modified by air, helium (He) or acrylic acid (AAc), were investigated with scanning electron microscopy (SEM), scanning probe microscope (SPM), in situ X-ray photoelectron spectroscopy (XPS) and water contact angle measurements. The changes of the surface property before and after plasma treatment were discussed. According to SEM and SPM measurements, the surface roughness increased at different levels after plasma treatment. Compared to air and AAc plasma treatment, the He plasma treatment introduced large amounts of oxygen into the surface, as known from XPS results. Contact angle measurements revealed that the hydrophilicity of the PTFE film surface was greatly improved due to the surface roughness and changes of chemical elements on the PTFE surface.     

Surface modification of polymethyl methacrylate intraocular lenses by plasma for improvement of antithrombogenicity and transmittance

To improve antithrombogenicity and reduce ultraviolet transmittance, polymethyl methacrylate intraocular lenses (PMMA IOLs) were pretreated with Ar plasma and combined with heparin (Hp), with polyglycol (PEG) and with both Hp and PEG in a plasma atmosphere. The resulting modified PMMA IOLs denoted as PEG-PMMA, Hp-PMMA and Hp-PEG-PMMA were characterized by attenuated total reflectance Fourier transfer infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), ultraviolet-visible spectroscopy (UV-vis), contact angle (CA) and platelet adhesion experiments. The results indicated that Hp and PEG had been successfully immobilized onto the surfaces of PMMA IOLs. Antithrombogenicity was improved remarkably and ultraviolet transmittance was reduced as well.     

Surface analysis of plasma grafted carbon fiber

The surface characteristics of carbon fibers were studied by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and wetting measurements. The surface of carbon fiber was modified by means of plasma graft silsesquioxane. The oxygen/carbon and silicon/carbon ratio increased rapidly after treatments. Fitting the C 1s, O 1s, and Si 2p spectra demonstrated that new photopeaks were emerged, which were indicated C-Si, Si-O groups, respectively. The degree of surface roughness and the wettability of carbon fiber surface were both increased by plasma graft silsesquioxane. The results may shed some light on the design of the appropriate surface structure, which could react with resin, and the manufacture of the carbon fiber reinforced composites.     

Modification of unsaturated polyester resins (UP) and reinforced UP resins via plasma treatment

Unsaturated polyester resins (UP) and reinforced composite unsaturated polyester resins (RCP) were made superhydrophobic by plasma assisted methods. Both CF₄-plasma-enhanced chemical vapor deposition (CF₄-PECVD) and alternative method were tested. The surfaces were characterized by water contact angle (CA) measurements and scanning electron microscopy (SEM). Water contact angle results indicated that CF₄-PECVD can significantly improve the wettability of UP surfaces, but suffer from difficulties for RCP surfaces. Alternatively, O₂ plasma followed by self-assembly of octadecyltrichlorosilane (OTS) self-assembled monolayer (SAM) was tested. It was shown that regardless of the filler percentage, O₂ plasma followed by self-assembly of OTS monolayer formation all led to superhydrophobic surfaces. The results provided a means to improve the wettability of reinforced UP resins (RCP).     

On the hydrogen etching mechanism in plasma nitriding of metals

Iron alloys and aluminum were nitrogen implanted in a controlled oxygen atmosphere and the role of hydrogen on the surface etching mechanisms studied. The surface composition was analyzed by in situ photoemission electron spectroscopy (XPS). In iron alloys, hydrogen strongly etches oxygen, improving nitrogen retention on the surface. On the other hand, hydrogen removes nitrogen from aluminum surfaces, with a deleterious effect on the nitriding effectiveness. The oxygen removal in iron alloys is associated with the catalytic effect of electrons in d-orbitals and the nitrogen removal in aluminum is associated with a steric effect.     

Surface analysis of oxygen plasma treated poly(p-phenylene benzobisoxazole) fibers

The influence of oxygen plasma treatment on surface properties of poly(p-phenylene benzobisoxazole) (PBO) fibers and aging effect of the oxygen plasma modified PBO fiber surfaces were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and dynamic contact angle analysis (DCAA), respectively. The results indicated that the oxygen plasma treatment introduced some polar groups to PBO fiber surfaces, enhanced surface roughness and changed surface morphologies of PBO fibers by plasma etching and oxidative reactions. Surface wettability of PBO fibers may be significantly improved by increasing surface free energy of the fibers via oxygen plasma treatment. Aging effect of the oxygen plasma treated PBO fibers showed that the fiber surface wettability degraded in the first several days after the plasma treatment, and it was found to be changeless as the aging time continued as long as 30 days.     

Experimental constants, characterizing the process of a plasma polymer modification

In the following paper, empirical constants are determined by a plasma-chemical model and experimental data of the wetting contact angle. The constants characterize the alteration of the contact angle as a function of the time of the polymer treatment and the kind of the plasma-creating gas. The presented equations of the model connect the contact angle with the empirical constants for arbitrary time intervals of treatment and arbitrary percentage content of the researched gas mixtures and gasses. The chemical rate constants, which describe the process of the plasma modification of the polymer material, are determined.     

Surface modification of porous poly(tetrafluoraethylene) film by a simple chemical oxidation treatment

A simple, inexpensive and environmental chemical treatment process, i.e., treating porous poly(tetrafluoroethylene) (PTFE) films by a mixture of potassium permanganate solution and nitric acid, was proposed to improve the hydrophilicity of PTFE. To evaluate the effectiveness of this strong oxidation treatment, contact angle measurement was performed. The effects of treatment time and temperature on the contact angle of PTFE were studied as well. The results showed that the chemical modification decreased contact angle of as-received PTFE film from 133 ± 3° to 30 ± 4° treated at 100 °C for 3 h, effectively converting the hydrophobic PTFE to a hydrophilic PTFE matrix. The changes in chemical structure, surface compositions and crystal structure of PTFE were examined by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), environmental scanning electron microscopy (ESEM), X-ray diffraction (XRD), respectively. It was found that the F/C atomic ratio decreased from untreated 1.65-0.10 treated by the mixture at 100 °C for 3 h. Hydrophilic groups such as carbonyl (CO) and hydroxyl (OH) were introduced on the surface of PTFE after treatment. Furthermore, hydrophilic compounds K_0.27MnO₂·0.54H₂O was absorbed on the surface of porous PTFE film. Both the introduction of hydrophilic groups and absorption of hydrophilic compounds contribute to the significantly decreased contact angle of PTFE.     

Surface state of TiO2 treated with low ion energy plasma

The effect of low pressure radio frequency (rf) plasma treatment on TiO₂ surface states has been studied using X-ray photoelectron spectroscopy. Three different oxidation states of oxygen in untreated TiO₂ powder were observed, which suggests the existence of adsorbed water and carbon on the surface. The ratio of oxygen to titanium (O/Ti) was decreased for the low ion dose plasma treated samples due to desorption of water from the surface. In the case of Ti 2p about 20% of surface states were converted to Ti³⁺ 2p_3/2 state after plasma treatment with a very good stability, whereas untreated TiO₂ remained mostly as Ti⁴⁺ state. A rapid decrease in the ratio of carbon to titanium (C/Ti) at TiO₂ surface was also observed after plasma treatment and more than 90% of carbon atoms were removed from the surface. Therefore, the plasma treatment of TiO₂ has advantages to surface carbon cleaning, increasing O⁻ and Ti³⁺ surface states, hence improving the activity of TiO₂ for different environmental, energy and biological applications.     

Surface modification of a biomedical polyethylene terephthalate (PET) by air plasma

In this work, low-pressure air plasma has been used to improve polyethylene terephthalate (PET) surface properties for technical applications. Surface free energy values have been estimated using contact angle value for different exposure times and different test liquids. Surface composition and morphology of the films were analyzed by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Surface topography changes related with the etching mechanism have been followed by weight loss study. The results show a considerable improvement in surface wettability and the surface free energy values even for short exposure times in the different discharge areas (discharge area, afterglow area and remote area), as observed by a remarkable decrease in contact angle values. Change of chemical composition made the polymer surfaces to be highly hydrophilic, which mainly depends on the increase in oxygen-containing groups. In addition to, the surface activation and AFM analyses show obvious changes in surface topography as a consequence of the plasma-etching mechanism.     

Surface chemical study on the covalent attachment of hydroxypropyltrimethyl ammonium chloride chitosan to titanium surfaces

An anti-microbial and bioactive coating could not only reduce the probability of infection related to titanium implants but also support the growth of surrounding osteogenic cells. Our previous study has showed that hydroxypropyltrimethyl ammonium chloride chitosan (HACC) with a DS (degrees of substitution) of 18% had improved solubility and significantly higher antibacterial activities against three bacteria which were usually associated with infections in orthopaedics. In the current study, HACC with a DS of 18% coating was bonded to titanium surface by a three-step process. The titanium surface after each individual reaction step was analyzed by X-ray photoelectron spectroscopy (XPS) and attenuated total reflection (ATR) of Fourier-transformed infrared (FT-IR) spectroscopy. The XPS results demonstrated that there were great changes in the atomic ratios of C/Ti, O/Ti, and N/Ti after each reaction step. The XPS high resolution and corresponding devolution spectra of carbon, oxygen, nitrogen, and titanium were also in good coordination with the anticipated reaction steps. Additionally, the absorption bands around 3365 cm⁻¹ (-OH vibration), 1664 cm⁻¹ (Amide I), 1165 cm⁻¹ (ν_as, C-O-C bridge), and the broad absorption bands between 958 cm⁻¹ and 1155 cm⁻¹ (skeletal vibrations involving the C-O stretching of saccharide structure of HACC) verified that HACC was successfully attached to titanium surface.     

A simple synthesis method to produce metal oxide loaded carbon paper using bacterial cellulose gel and characterization of its electrochemical behavior in an aqueous electrolyte

A simple synthetic chemical process to produce metal oxide loaded carbon papers was developed using bacterial cellulose gel, which consisted of nanometer-sized fibrous cellulose and water. Metal ions were successfully impregnated into the gel via aqueous solution media before drying and carbonization methods resulting in metal oxide contents that were easy to control through variations in the concentration of aqueous solutions. The papers loaded by molybdenum oxides were characterized as pseudocapacitor electrodes preliminary, and the large redox capacitance of the oxides was followed by a conductive fibrous carbon substrate, suggesting that a binder and carbon black additive-free electrode consisting of metal oxides and carbon paper was formed.     

Surface modification of activated carbons for CO2 capture

The reduction of anthropogenic CO₂ emissions to address the consequences of climate change is a matter of concern for all developed countries. In the short term, one of the most viable options for reducing carbon emissions is to capture and store CO₂ at large stationary sources. Adsorption with solid sorbents is one of the most promising options. In this work, two series of materials were prepared from two commercial activated carbons, C and R, by heat treatment with gaseous ammonia at temperatures in the 200-800 °C range. The aim was to improve the selectivity and capacity of the sorbents to capture CO₂, by introducing basic nitrogen-functionalities into the carbons. The sorbents were characterised in terms of texture and chemical composition. Their surface chemistry was studied through temperature-programmed desorption tests and X-ray photoelectron spectroscopy. The capture performance of the carbons was evaluated by using a thermogravimetric analyser to record mass uptakes by the samples when exposed to a CO₂ atmosphere.     

常压介质阻挡放电等离子体发射光谱诊断及其在材料表面改性中的应用

使用介质阻挡放电光谱诊断装置,分析了常压等离子体放电电流与放电间隙的变化关系,提出了“放电临界间隙”的概念,记录和比较了空气和氩气常压介质阻挡放电等离子体发射光谱,并运用同一元素谱线的相对强度来诊断电子温度等物理参量,以达到对材料表面改性过程的实时监控。工作的结果对常压介质阻挡放电及其在材料改性中的应用具有重要的意义。     

Fatigue properties of a S45C steel subjected to ultrasonic nanocrystal surface modification

An ultrasonic nanocrystal surface modification (UNSM) technique, at 3 different vibration strike numbers (34,000 times/mm², 45,000 times/mm², 68,000 times/mm²) was used to modify the surface structure and properties of S45C. These three process conditions respectively produced 2 μm, 12 μm and 30 μm nanocrystal layers. UNSM technique improves the following mechanical properties: microhardness, surface roughness, and compressive residual stress. Also, fatigue life increased with the vibration strike number. UNSM C3 (with the vibration strike number of 68,000 times/mm²) has improved the fatigue strength by as much as 33% for S45C. Optical microscope pictures show that cracks usually initiate from intergranular microcracks on the surface and then extend along the tip traces of UNSM which are considered as process defects. A simple math model (tearing adhesive plaster model) has been made to analyze the initiation and growth of cracks. Though most of the cracks initiate at the surface of specimens, surface nanocrystal layers can help to retard crack initiation. In S45C, the efficiency of crack resistance is more than 48%.the vibration strike number     

利用发射光谱进行常压介质阻挡放电等离子体诊断及其在材料表面改性上的应用(英文)

使用介质阻挡放电光谱诊断装置,对常压介质阻挡放电在材料改性过程中的等离子体发射光谱进行测量,记录和比较了空气、氦气和氩气常压介质阻挡放电等离子体发射光谱,并运用氩元素谱线的相对强度来诊断电子温度等物理参量,以达到对材料表面改性过程的实时监控。工作的结果对常压介质阻挡放电及其在材料改性上的应用具有重要的意义     

Surface modification of HMS material with silica sol leading to a remarkable enhanced catalytic performance of Cu/SiO2

Cu/SiO₂ catalysts with different bimodal pore structures adjusted by the ratio of HMS and silica sol were prepared via modified impregnation method. Structure evolutions of the catalyst were systematically characterized by N₂-physisorption, X-ray diffraction, H₂ temperature-programmed reduction, N₂O titration and X-ray photoelectron spectroscopy. The results show that the composite silica supported copper catalysts showed remarkably enhanced catalytic performance in the selective hydrogenation of dimethyl oxalate to ethylene glycol compared to the individual silica supported ones obtained by the same method. The dimethyl oxalate conversion and the ethylene glycol selectivity can reach 100% and 98% at 473 K with 2.5 MPa H₂ pressure and 1.5 h⁻¹ liquid hour space velocity of dimethyl oxalate over the optimized Cu/SiO₂ catalyst. The remarkably enhanced catalytic performance of Cu/SiO₂ catalysts might be attributed to the homogeneous dispersion and uniformity of the active copper species and to the larger copper surface areas attained on the HMS supports with large pore diameters and surface areas.     

Physical-morphological and chemical changes leading to an increase in adhesion between plasma treated polyester fibres and a rubber matrix

The effects of plasma treatment, used to increase adhesion strength between poly(ethylene terephtalate) (PET) fibres and a rubber matrix, were investigated and compared. Morphological changes as a result of atmospheric plasma treatment were observed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Wettability analysis using a surface energy evaluation system (SEE system) suggested that the plasma treated fibre was more wetting towards a polar liquid. When treated, these fibres showed a new lamellar crystallization, as shown by a new melting peak using differential scanning calorimetry (DSC). X-ray photoelectron spectroscopy (XPS) has been used to study the chemical effect of inert (argon), active and reactive (nitrogen and oxygen) microwave-plasma treatments of a PET surface. Reactive oxygen plasma treatment by a de-convolution method shows new chemical species that drastically alter the chemical reactivity of the PET surface. These studies have also shown that the surface population of chemical species formed after microwave-plasma treatment is dependent on the plasma gas. All these changes cause better adhesion strength of the PET fibres to the rubber matrix.