Kinetic study of cytochrome P450 3A4 activity on warfarin by capillary electrophoresis with fluorescence detection

The use of capillary electrophoresis (CE) for the determination of cytochrome P450 3A4 (CYP3A4) activity with R-warfarin as a substrate was investigated. CYP3A4 activity was determined by the quantitation of the product, 10-hydroxywarfarin, based on separation by CE. The separation conditions were as follows: capillary, 80.5 cm (75 microm i.d., 60 cm effective length); 50 mM sodium phosphate buffer (pH 6.5); 23 kV (90 microA) applied voltage; fluorescence detection, excitation wavelength, 310 nm, emission wavelength, 418 nm; capillary temperature, 37 degrees C. With the developed CYP3A4 activity assay and the Lineweaver-Burk equation, the Michaelis-Menten parameters Km and Vmax for formation of 10-hydroxywarfarin from R-warfarin in the presence of CYP3A4 were calculated to be 166 +/- 12 microM and 713 +/- 14 pmol/min/nmol (or 91.4 pmol/min/mg) CYP3A4, respectively.     

Analysis of baclofen by capillary electrophoresis with laser-induced fluorescence detection

A new analytical method for baclofen (4-amino-3-p-chlorophenylbutyric acid) based on capillary electrophoretic separation and laser-induced fluorescence detection has been developed. Naphthalene-2,3-dicarboxaldehyde was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH 9.5) and a He-Cd laser (excitation at 442 nm, emission at 500 nm). Linearity (r > or = 0.99) over three orders of magnitude was generally obtained and the concentration limit of detection was in the nanomolar level. Coupled with a simple cleanup procedure, the method was successfully applied to the analysis of baclofen in human plasma. Recovery of spiked baclofen in plasma was 98%. The relative standard deviation values on peak size and migration time were 7.9% and 0.4%, respectively. The limit of detection of baclofen in plasma was 10 ng/ml.     

Analysis of organic components of smokeless gunpowders: high-performance liquid chromatogaphy vs. micellar electrokinetic capillary chromatography

The aim of the present study was to verify the analytical performances of high-performance liquid chromatography (HPLC) and micellar electrokinetic capillary chromatography (MEKC) for the separation and qualitative determination of a selected group of organic components of smokeless gunpowders. The HPLC method was based on a gradient reversed-phase elution with a mobile phase composed of 0.17 M H(3)PO(4)/methanol; detection was performed by UV absorption at the wavelengths of 220, 254, and 270 nm. The MEKC experiments were carried out by using uncoated fused-silica capillaries (50 microm inside diameter, 50 cm effective length) and a running buffer composed of 10 mM sodium tetraborate at pH 9.24 added with 25 mM sodium dodecyl sulfate (SDS); the applied voltage was 25 kV; detection was either at a fixed wavelength UV of 214 nm or with a diode-array detector operating in the wavelength range from 190 to 350 nm. Both reversed-phase HPLC and MEKC techniques succeeded in resolving the tested standard mixtures of organic components of smokeless powders. Although the sequence of elution of the different analytes was slightly different between HPLC and MEKC, a statistical analysis based on the Spearman's rank correlation test showed that the two separation patterns were highly correlated. HPLC and MEKC were comparable in terms of elution/migration time precision, whereas MEKC showed higher reproducibility of peak areas. The interfacing of capillary electrophoresis with diode array UV detection provided distinct UV spectra of the individual analytes, thus improving, on the detection side, the analytical selectivity and identification power of capillary electrophoresis.     

Comparison of shikimic acid determination by capillary zone electrophoresis with direct and indirect detection with liquid chromatography for varietal differentiation of red wines

Two capillary zone electrophoretic (CZE) methods for determination of shikimic acid in Chilean red wine were developed and compared with a HPLC method. Both electrophoretic methods were carried out by using a reversed electroosmotic flow induced by trimethyl(tetradecyl)ammoniumbromide (TTAB) with indirect detection at 260 nm using p-aminobenzoic acid as a UV-absorbing co-ion or by direct detection at 213 nm. In both cases, the separation was carried out in a 50 microm I.D. uncoated capillary with an effective length of 48 cm, a negative power supply of 30 kV, using a buffer based on bis[2-hydroxyethyl]imino-tris[hydroxymethyl]methane (Bis-Tris), pH 7.0 or 7.5 and hydrodynamic injection. The chromatographic separations were carried out on a C-18 reversed phase column followed by a sulfonyl-styrene-divinylbenzene (S-DVB) ion exclusion column at 70 degrees C with H2SO4 0.02 M as isocratic mobile phase and a flow rate of 0.5 mL min(-1). The three methods allowed the quantification of shikimic acid with quantification limits between 1.0 and 12.0 mg L(-1) and precision between 7.3 and 10.1%, however, only the concentrations obtained by CZE with direct detection were statistically similar to those of HPLC. This parameter was evaluated as analytical tool to verify varietal authenticity of red wines. In all cases, the Cabernet Sauvignon wines presented higher concentrations of shikimic acid, compared with Merlot or Carmenère wines.     

Separation of capsular polysaccharide K4 and defructosylated K4 derived disaccharides by high-performance capillary electrophoresis and high-performance liquid chromatography

A rapid, highly sensitive and reproducible high-performance capillary electrophoresis (HPCE) method (electrokinetic chromatography with sodium dodecyl sulfate) is described for the determination of disaccharides present in the polysaccharide from the uropathogenic Escherichia coli K4 bacteria (05:K4:H4) and its defructosylated product. Following chondroitinase digestion of K4 and its derivative, the two disaccharides, DeltaHexAFrc-GalNAc for K4 and deltaHexA-GalNAc for defructosylated K4, are separated and readily determined within 20 min on an uncoated fused-silica capillary using normal polarity at 20 kV and detection at 230 nm. Comparison was made by separation of these two disaccharides in isocratic strong-anion exchange HPLC. A linear relationship was found for the two unsaturated disaccharides over a wide range of concentrations, from approximately 0.5 to 5 micro g for high-performance liquid chromatography (HPLC) and from approximately 0.06 to 0.3 micro g for HPCE. The HPCE separation produced a greater detection sensitivity (about 10 times greater) than HPLC. The described methods were used to evaluate the defructosylation process of K4 under drastic acid conditions. Good correspondence was found for the amount of unsaturated disaccharides for the two techniques.     

Separation of capsular polysaccharide K4 and defructosylated K4 by high-performance capillary electrophoresis

A rapid, highly sensitive and reproducible high-performance capillary electrophoresis (HPCE) method (electrokinetic chromatography with sodium dodecyl sulfate) is described for the determination of the polysaccharide from the uropathogenic Escherichia coli K4 bacteria (05:K4:H4) and its defructosylated product. The two polyanions, K4 and defructosylated K4, are separated and readily determined within 30 min on an uncoated fused-silica capillary using normal polarity at 20 kV and detection at 200 nm. A linear relationship was found for the two polysaccharides over a wide range of concentrations, from approximately 30 ng (0.5 microg/microL) to 210 ng (3.5 microg/microL). The described method was used to evaluate the defructosylation process of K4 under drastic acid conditions.     

Capillary electrophoresis of urinary porphyrins with absorbance and fluorescence detection

Urinary porphyrins are separated in a 72 cm x 50 microns I.D. fused-silica capillary by micellar electrokinetic capillary chromatography with 100 mM sodium dodecyl sulfate and 20 mM 3-(cyclohexylamino)-1-propanesulfonic acid at pH 11. Detection is accomplished by absorbance at 400 nm or fluorescence with excitation at 400 nm and emission at wavelengths above 550 nm. Substantial trace enrichment is found for porphyrins in urine samples or for porphyrin standards prepared without surfactant in the injection buffer. Limits of detection are in the 100 pmol/ml concentration range with an optimized fluorescence system. The method is shown suitable for the determination of porphyrins in clinical urine specimens. Comparisons are made between electrophoretic and chromatographic methods for the separation and detection of urinary porphyrins.     

Capillary electrophoresis of baclofen with argon-ion laser-induced fluorescence detection

A capillary electrophoretic method with laser-induced fluorescence detection for baclofen (4-amino-3-p-chlorophenylbutyric acid) has been developed. 6-Carboxyfluorescein succinimidyl ester was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH 9.5) and an air-cooled argon-ion laser (excitation at 488 nm, emission at 520 nm). Linearity (r > or = 0.99) over three orders of magnitude was generally obtained and the lowest derivatizable concentration limit for baclofen in aqueous solution was 10 nM (2 ng baclofen/ml). Coupled with a simple clean up procedure, the method can be applied to the analysis of baclofen in human plasma at micromolar level. Recovery of spiked baclofen in plasma was 95%. The relative standard deviation values on peak size (0.5 microM level) and migration time were 8.2 and 1.0% (n=7), respectively. The limit of detection of baclofen in plasma was 0.1 microM (21 ng/ml).     

Direct determination of sialic acids in serum by capillary electrophoresis with UV detection

Summary A novel method for the determination of N-acetylneuraminic acid (NANA) and N-glycolylneuraminic acid (NGNA) has been developed using high-performance capillary electrophoresis with UV detection at 195 nm, without pre or post-column derivatisation. The acids were separated in a 50-cm, fused-silica capillary (50μ i.d, 45.5-cm effective length) with Na₂B₄O₇−Na₂HPO₄ buffer. The detection limit for NANA is a concentration of 9.6×10⁻⁶ M or, in terms of mass:3.879×10⁻¹⁴ mol (39 fmol). This method is applicable to determination of NANA in normal human serum. The results were also compared with those of the colorimetrie method.     

Open tubular capillary electrochromatography with an N‐phenylacrylamide‐styrene copolymer‐based stationary phase for the separation of anomers of glucose and structural isomers of maltotriose

A ligand with a terminal halogen (4‐chloromethylphenyl isocyanate) was chemically bound on the inner surface of pretreated silica capillary with 50 μm internal diameter and 58 cm total and 50 cm effective length in the presence of dibutyl tin dichloride as a catalyst through isocyanate‐hydroxyl reaction. Attachment of initiator (sodium diethyl dithiocarbamate) to the bound ligand was carried out and followed by in situ polymerization. Reversible addition‐fragmentation chain transfer polymerization was used for the immobilization of N‐phenylacrylamide‐styrene copolymer on the inner surface of capillary column. The resultant open tubular column showed excellent separation performance for derivatized saccharide isomers in capillary electrochromatography. d ‐Glucose was separated into α‐ and β‐anomers while five structural isomers were separated for derivatized maltotriose with separation efficiency above one million theoretical plates per meter. The effects of pH and acetonitrile composition on the electrochromatographic performance of the derivatized saccharides were studied and the optimized elution condition was found to be 90:10 v/v% acetonitrile/30 mM sodium acetate at pH 6.6. UV absorption at 214 nm was used as detection mode in open tubular capillary electrochromatography separations.     

Determination of bisphenol A and 10 alkylphenols in serum using SDS micelle capillary electrophoresis with gamma-cyclodextrin.

A new micelle capillary electrophoresis based on cyclodextrin micellar electrokinetic chromatography (MEKC) for the determination of bisphenol A and 10 alkylphenols in rat serum is reported. Several surfactants and dextrins were studied. Bisphenol A and alkylphenols were separated using a 50 microm x 50 cm capillary with 20 mM borate phosphate buffer (pH 8.0) containing 20 mM sodium dodecylsulfate and 5 mM gamma-cyclodextrin as carrier. The method could determine 0.6-2000 microg/mL of phenols in 100 microL serum by photometric detection at 214 nm. Using 2.0 mL serum, 1.0 ng/mL of phenols could be determined. The relative standards deviations were 6.3-7.7% at 10 microg/mL in serum. The recoveries were 91.8-93.0% with 10 microg/mL serum samples.     

Determination of rimantadine in pharmaceutical preparations by capillary zone electrophoresis with indirect detection or after derivatization

Summary Rimantadine is synthetic analog of amantadine; both are antiviral agents used for prophylaxis and treatment of influenza A. A capillary zone electrophoretic (CZE) procedure for the determination of rimantadine has been developed. As the direct determination of rimantadine is poorly sensitive because the compound is almost transparent in the UV/Vis range, several indirect methods were studied. Two were found to be the particularly useful: (a) indirect detection using 5 mM 4-methylbenzylamine in 1:4 methanol-water as absorbing background electrolyte, with detection at 210 nm, and (b) derivatization of rimantadine with 1,2-naphthoquinone-4-sulfonic acid in alkaline medium and subsequent determination of the derivative by CZE (40 mM tetraborate, pH 9.2, detection at 280 nm). Uncoated capillary tubing, 44 cm length ×75 μM i.d., was used for both determinations. The detection limits were 0.1 and 2 ppm for methods a and b, respectively. The methods were used to determine rimantadine in pharmaceutical products and for dissolution testing of Flumadin^? tablets.     

Open tubular capillary electrochromatography of underivatized amino acids using Rh(III) tetrakis(phenoxyphenyl)porphyrinate as wall modifier

The separation of 17 “common” underivatized amino acids was attempted by open tubular capillary electrochromatography (OT-CEC) in fused-silica capillaries coated with Rh(III) tetrakis(phenoxyphenyl)porphyrinate (Rh(III)TPP(m-OPh)₄OAc) using sodium phosphate and Tris–phosphate buffers as background electrolytes (BGEs). The OT-CEC separation of amino acids was compared with that obtained by capillary zone electrophoresis in bare fused-silica capillaries using the same BGEs. The amino acids were not derivatized and the UV-absorption detection was set at 200 nm. Depending on the experimental conditions at least 15 amino acids were separated. The best separations were obtained in a Rh(III)TPP(m-OPh)₄OAc-coated capillary in 50 mM Tris–100 mM phosphate buffer at pH 2.25. Separation of the critical triplet Val–Ile–Leu was always at least indicated being better at higher BGE concentrations. Regarding the sensitivity of the method, lower concentration limits of detection (LODs) in the coated capillary were obtained for Thr, Gly, Tyr, and Val; the other amino acids exhibited lower LODs in the uncoated capillary. The separation of acidic amino acids was not achieved.     

毛细管区带电泳测定纳米粒子粒径分布的探索

研究了采用毛细管区带电泳测定纳米粒子粒径分布的可能性。在合适的分散条件下,聚苯乙烯(PS)纳米粒子在进样及电泳迁移过程中不发生团聚。通过选择合适的电泳操作条件,PS纳米粒子可以按照粒径大小得到分离,且迁移时间及峰面积的重现性良好。     

毛细管区带电泳分析稻瘟病菌诱导水稻叶片蛋白

用毛细管区带电泳分析了受稻瘟病菌侵染的水稻幼苗的叶片细胞蛋白提取物和胞间流液蛋白提取物,用线性聚丙烯酰胺涂渍的毛细管柱来抑制蛋白的吸附。采用数理统计中检验异常值的Ｇｒｕｂｂｓ方法分析结果,与对照实验相比,在叶片细胞蛋白提取物中发现了一种被稻瘟病菌诱导表达的蛋白。     

毛细管胶束电动色谱法分析PTH氨基酸

建立了用毛细管胶束电动色谱法（MEKC）分离19种PTH氨基酸的方法,并探讨了电压、pH值、温度、胶束浓度对氨基酸迁移时间的影响。方法具有速度快、灵敏度高、样品用量少的优点。     

Design and synthesis of a hydrophilic fluorescent derivatization reagent for carboxylic acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH2), and its application to capillary electrophoresis with laser-induced fluorescence detection

A hydrophilic fluorescent derivatization reagent for fatty acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH(2)), was designed and synthesized. NBD-PZ-NH(2) possesses not only a fluorophore and a reacting group but also a positive charge group and, thus, was hydrophilic and suitable for application to capillary electrophoresis. NBD-PZ-NH(2) reacted with fatty acids in the presence of triphenylphosphine (TPP) and 2,2'-dipyridyl disulfide (DPDS) at room temperature within 10 min. The derivatives were strongly fluoresced and were positively charged at pH below 3. The derivatives of C4-C20 fatty acids were separated within 10 min in 50% acetonitrile in water containing 30 mM ammonium acetate and 1.0 M acetic acid by capillary electrophoresis with laser-induced fluorescence (CE-LIF) detection. The detection limits attained were 6.5 nM (signal-to-noise ratio of 3). It is proposed that NBD-PZ-NH(2) is a prominent derivatization reagent for fatty acids which is suitable for CE-LIF application.     

On-capillary complexation of metal ions with 4-(2-thiazolylazo)resorcinol in capillary electrophoresis

Co(II), Zn(II), Ni(II) and Fe(I) were successfully separated by capillary electrophoresis using pre-capillary and on-capillary complexation with 4-(2-thiazolylazo)resorcinol. The influences of some crucial parameters, including both pre- and on-capillary complexation procedure, were investigated. For on-capillary complexation, the complexing reaction was carried out inside the capillary by mixing the zones of ligand and sample during the electrophoretic migration. Compared with pre-capillary complexation, the method provided 30-fold reduction in detection limits for Co(II), 50-fold reduction for Zn(II), and 100-fold reduction for Ni(II) and Fe(II). It was used for the analysis of a pharmaceutical and tap water sample.     

Analysis of low molecular weight aldehydes in air samples by capillary electrophoresis after derivatization with 4-hydrazinobenzoic acid

This work reports the analysis of selected aldehydes in air samples using capillary electrophoresis (CE). The method is based on the reaction of aldehydes with 4-hydrazinobenzoic acid (HBA) to give the corresponding hydrazones with maximum absorbance at 290 nm. Under optimized CE conditions, the HBA derivatives of four carbonyls (formaldehyde, acetaldehyde, propionaldehyde, and acrolein) were completely separated from one another, in less than 6 min, using a pH 9.3 tetraborate buffer at 0.040 mol L(-1) concentration as background electrolyte. A few method validation parameters were determined revealing good migration time repeatability (< 1.5% CV) and area repeatability (< 2% CV), excellent linearity (50-300 microg/L, r > 0.996) and adequate sensitivity for environmental applications. The limits of detection with respect to each single aldehyde were in the range of 2.7-8.8 ng L(-1). The methodology was applied to the determination of aldehydes indoors. Samples were collected in HBA impregnated octadecylsilica cartridges, at different times during the day. The most abundant carbonyls in the samples were acetaldehyde followed by formaldehyde, with estimated peak concentrations of 4.3 and 2.9 ppbv, respectively.     

毛细管区带电泳法测定尿中甲酸含量

采用高效毛细管区带电泳法测定人体尿中甲酸含量,尿样经过滤后直接进样,方法简单、快速,测定结果令人满意。电泳电解质体系采用５ｍｍｏｌ／Ｌ邻苯二甲酸氢钾,０．５ｍｍｏｌ／Ｌ十六烷基三甲基溴化铵,ｐＨ６,５０ｃｍ×５０μｍｉ．ｄ．熔融石英毛细管（有效长度４８．５ｃｍ）,检测波长２１０ｎｍ,负电源,分离电压３０ｋＶ,压力进样,恒温２５℃,每次电泳前用０．１ｍｏｌ／ＬＮａＯＨ及缓冲溶液对毛细管各冲洗５ｍｉｎ。同时,采用检测波长与参比波长对调的方法使负峰转变为正峰。