Synthesis process and the luminescence properties of rare earth doped NaLa(WO4)2 nanoparticles

Rare earth doped NaLa(WO₄)₂ nanoparticles have been prepared by a simply hydrothermal synthesis procedure. The X-ray diffraction (XRD) pattern shows that the Eu³⁺-doped NaLa(WO₄)₂ nanoparticles with an average size of 10-30 nm can be obtained via hydrothermal treatment for different time at 180 °C. The luminescence intensity of Eu³⁺-doped NaLa(WO₄)₂ nanoparticles depended on the size of the nanoparticles. The bright upconversion luminescence of the 2 mol% Er³⁺ and 20 mol% Yb³⁺ codoped NaLa(WO₄)₂ nanoparticles under 980 nm excitation could also be observed. The Yb³⁺-Er³⁺ codoped NaLa(WO₄)₂ nanoparticles prepared by the hydrothermal treatment at 180 °C and then heated at 600 °C shows a 20 times stronger upconversion luminescence than those prepared by hydrothermal treatment at 180 °C or by hydrothermal treatment at 180 °C and then heated at 400 °C.     

Preparation, conversion, and comparison of the photocatalytic property of Cd(OH)2, CdO, CdS and CdSe

In this paper, we report the hydrothermal preparation of Cd(OH)₂ nanowires and further conversion to CdO nanobelts, CdS nanowires and CdSe nanoparticles through thermal treatment, solvothermal and mixed-solvothermal routes, respectively. The as-obtained products were characterized by means of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FEMSEM). Research showed that four cadmium compounds were good photocatalysts for the degradation of organic dyes such as Safranine T and Pyronine B, under irradiation of 365 nm UV light. The order of catalytic activity of different materials was found to be Cd(OH)₂<CdO<CdS<CdSe.     

Structural and luminescence characterization of synthetic Cr-doped Ni3(PO4)2

Ni_3–xCr_2x/3(PO₄)₂ (x=0 and 0.02) microcrystalline powders were obtained as single phases via a modified sol–gel Pechini-type in situ polymerizable complex method. The samples were characterized using scanning electron microscopy, X-ray diffraction, cathodoluminescence (CL), and thermoluminescence (TL) techniques. We found that Cr³⁺ doping modified the average particle and distribution. The mean particle size was 0.441 μm for Ni₃(PO₄)₂ and 0.267 μm for Ni_2.98Cr_0.013(PO₄)₂. The results also reveal that Cr³⁺ doping notably enhanced the CL and TL UV-blue emission.     

Hydrothermal synthesis of V O2(B) nanoribbons by a mixed-oxidation state precursor route

Highly crystalline metastable phase V O₂(B) nanoribbons were fabricated on a large scale by hydrothermally treating a mixed-oxidation state vanadium (IV,V) precursor in PEG-600 aqueous solution. The nanoribbons were uniform along the longitudinal direction with a length up to several micrometers, width in the range 50–100 nm, and thickness about 10 nm, respectively. The growth process of nanoribbons and the factors influencing the morphology were also studied in detail. This novel precursor route provided a promising method with less reaction time and mild neutral aqueous environment, and the precursor could be potentially used in the fabrication of other nanostructured vanadium compounds.     

Multicomponent GeSe2-CdI2-TeO2 (Bi2O3) systems: glass formation and properties

The glass-forming regions of the GeSe₂-CdI₂-TeO₂ (I), GeSe₂-CdI₂-Bi₂O₃ (II) and GeSe₂-TeO₂-Bi₂O₃ (III) systems have been determined. The obtained glassy phases have been characterized by their basic physicochemical parameters such as temperatures of glass transition, crystallization, and melting, density and microhardness. The phase T-X diagram of the GeSe₂-CdI₂ system, which is the basic joint line for systems I and II, has been specified. Three non-variant equilibria (two eutectic and one syntectic) have been observed at temperatures 350, 280 and 375 °C for compositions containing 15, 95 and 33.3 mol% GeSe₂, respectively. A new intermediate phase with probable composition of 2CdI₂·GeSe₂ has been formed.     

Comparative structural and photoluminescent study of Eu-doped La2O3 and La(OH)3 nanocrystalline powders

Eu³⁺-doped La₂O₃ nanocrystalline powder was prepared by polymer complex solution method and further used for preparation of Eu³⁺-doped La(OH)₃. Structural and optical characterization was carried out by powder X-ray diffraction and photoluminescent spectroscopy. XRD measurements confirmed the formation of hexagonal La₂O₃ and its recrystallization into La(OH)₃ in a humid atmosphere. Excitation spectra show redshift of host lattice and charge transfer emission bands in La(OH)₃ while bands that correspond to Eu³⁺f–f transitions are placed at same wavelengths in both samples. Photoluminescence spectra recorded over the temperature range from 10 K to 300 K show that intensities of emission lines in Eu³⁺-doped La₂O₃ do not depend on temperature as much as in La(OH)₃ sample. Observed dominant ⁵D₀→⁷F₂ and markedly visible ⁵D₀→⁷F₀ emissions in doped La₂O₃ indicate that Eu³⁺ ion is located in a structural site without an inversion center. On the other hand, in Eu³⁺-doped La(OH)₃⁵D₀→⁷F₀ transition is barely visible while ⁵D₀→⁷F₂ is not prominent, and with temperature drop three ⁵D₀→⁷F_J (J=1, 2, 4) transitions become almost of the same intensity. In both La₂O₃ and La(OH)₃ structures Eu³⁺ ion replaces La³⁺ in non-centrosymmetric C_3v and C_3h crystallographic sites, respectively, and difference in symmetry of the crystal field around europium ion is explained by comparing shape and volume of these sites. Decay times of the ⁵D₀- level recorded over the temperature range 10−300 K revealed that emission lifetime values in La₂O₃ (~0.7 ms) are almost two times higher than in La(OH)₃ (~0.4 ms), and unlike in La₂O₃, lifetime in La(OH)₃ is temperature dependent.     

Synthesis and crystal structure of [3,5-(CH3)2C6H3NH3]4P4O12·3H2O

Chemical preparation and crystal structure are given for a new cyclotetraphosphate: [3,5-(CH₃)₂C₆H₃NH₃]₄P₄O₁₂·3H₂O. This compound is triclinic P with the following unit-cell parameters: a=8.298(3), b=8.299(3), c=17.242(7)Å, α=97.13(3), β=102.72(3), γ=64.55(3)°, Z=1 and V=1045.2(8)ų. The crystal structure has been solved and refined to R=0.040 using 6086 independent reflections. The atomic arrangement can be described as layers organization. Layers built by P₄O₁₂ ring anions, ammonium groups and water molecules parallel to the plan (001), between which the organic groups are located. Characterization by X-ray diffraction, IR absorption, and thermal analysis are described.     

Synthesis and characterization of a new monophosphate [2,5-(CH3)2C6H3NH3]H2PO4

Chemical preparation, calorimetric studies, crystal structure and spectroscopic investigations are given for a new noncentrosymmetric organic cation monophosphate [2,5-(CH₃)₂C₆H₃NH₃]H₂PO₄. This compound is orthorhombic P2₁2₁2₁ with the following unit-cell parameters: a=5.872(4), b=20.984(3), c=8.465(1) Å, Z=4, V=1043.0(5) Å³ and D_x=1.396 g cm⁻³. Crystal structure has been solved and refined to R=0.048 using 2526 independent reflections. Structure can be described as an inorganic layer parallel to (a,b) planes between which organic groups [2,5-(CH₃)₂C₆H₃NH₃]⁺ are located. Multiple hydrogen bonds connecting the different entities of compound thrust upon three-dimensional network a noncentrosymmetric configuration.     

Influence of lithium phosphate concentration and temperature on the electrical conduction of (76V2O5-24P2O5)1−X (Li3PO4)X glasses

Characterization of the (76V₂O₅-24P₂O₅)_1−X (Li₃PO₅)_X, where X=0.0,0.01,0.02,0.10 and 0.15, glass has been done using X-ray diffraction and differential thermal analysis (DTA). The dc conductivity of the glass samples was studied over a temperature range from 300 to 593 K. The temperature dependence of dc conductivity shows two regions. One at relatively high temperature range, above θ_D/2, and the other at relatively low temperature range, below θ_D/2. The I-V characteristics of the glasses have been studied as a function of both temperature and Li₃PO₄ content. The I-V characteristics exhibits threshold switching with differential negative resistance. It's found that both the threshold voltage (V_th) and threshold current (I_th) are dependent on the temperature and lithium phosphate concentration.     

Preparation and characterization of the layered hybrids (CnH2n+1NH3)2FeCl4

The series of the hybrids (C_nH_2n+1NH₃)₂FeCl₄, where n=2, 4, 6, 8, 10 and 12, were synthesized in HCl solutions. The optimum conditions of synthesis were investigated including the sequence of adding reactants, the stoichiometric ratio of the reactants, the reaction time and the drying procedures. The results demonstrate that the order of adding reactants, the drying temperature and drying time have little effect on the structures of the products. But for the hybrids of n?10, longer reaction time is needed to form the layered structures. The X-ray diffraction (XRD) patterns and the images of scanning electron microscopy of the products demonstrate that the hybrids crystallize well with typical layered structures. Chemical analysis of C, H and N confirms that the hybrids consist of the elements in the ratio of the molecular formulas. The d values, the interlayer distance between the two adjacent inorganic sheets of each hybrid, are obtained from the XRD patterns and they suggest that the organic chains interdigitate between the inorganic sheets. The longer the organic chains are, the more interdigitations there are. This can be explained by the different interaction strengths between the organic species when the chain lengths change. These different interactions can also explain the phenomena observed in the synthesis and the decomposing temperatures of the hybrids.     

Synthesis and crystallographic studies of garnet-type AgCa2Mn2V3O12 and NaPb2Mn2V3O12

High-purity powder specimens of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ have been successfully synthesized by solid-state chemical reaction. The Rietveld refinements from X-ray powder diffraction data verified that these compounds have the garnet-type structure (space group , No. 230) with the lattice constant of a=12.596(2) Å for AgCa₂Mn₂V₃O₁₂ and a=12.876(2) Å for NaPb₂Mn₂V₃O₁₂. Calculation of the bond valence sum supported that Mn is divalent and V is pentavalent in these garnets. Estimation of the quadratic elongation and the bond angle variance showed that the distortions of the MnO₆ octahedra and the VO₄ tetrahedra are significantly suppressed. Our new results of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ are compared to those of AgCa₂M₂V₃O₁₂ and NaPb₂M₂V₃O₁₂ (M=Mg, Co, Ni, Zn).     

Improving the visible light photocatalytic activity of mesoporous TiO2 via the synergetic effects of B doping and Ag loading

B-doped together with Ag-loaded mesoporous TiO₂ (Ag/B–TiO₂) was prepared by a two-step hydrothermal method in the presence of boric acid, triblock copolymer surfactant, and silver nitrate, followed by heat treatment. The obtained samples were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption–desorption. It was revealed that all samples consist of highly crystalline anatase with mesoporous structure. For Ag/B–TiO₂, B was doped into TiO₂ matrix in the form of both interstitial B and substitutional B while Ag was deposited on the surface of B–TiO₂ in the form of metallic silver. Compared with the single B-doped or Ag-loaded TiO₂ one, mesoporous Ag/B–TiO₂ exhibits much higher visible light photocatalytic activity for the degradation of Rhodamine 6G, which can be ascribed to the synergistic effects of B doping and Ag loading by narrowing the band gap of the photocatalyst and preventing the fast recombination of the photogenerated charge carriers, respectively.     

Synthesis of earth-abundant Cu2SnS3 powder using solid state reaction

Cu₂SnS₃ (CTS) powder has been synthesized at 200 °C by solid state reaction of pastes consisting of Cu and Sn salts and different sulphur compounds in air. The compositions of the products is elucidated from XRD and only thiourea is found to yield CTS without any unwanted CuS_x or SnS_y. Rietveld analysis of Cu₂SnS₃ is carried out to determine the structure parameters. XPS shows that Cu and Sn are in oxidation states +1 and +4, respectively. Morphology of powder as revealed by SEM shows the powder to be polycrystalline with porous structure. The band gap of CTS powder is found to be 1.1 eV from diffuse reflectance spectroscopy. Cu₂SnS₃ pellets are p-type with electrical conductivity of 10⁻² S/cm. The thermal degradation and metal–ligand coordination in CTS precursor are studied with TGA/DSC and FT-IR, respectively, and a probable mechanism of formation of CTS has been suggested.     

Rapid exothermic synthesis of chalcopyrite-type CuInSe2

Chalcopyrite-type CuInSe₂ (CIS) was synthesized from Cu, In and Se powders by a mechanochemical process (MCP) without any additional heating. When the transparent reactor bottle was strongly shaken, the elemental powders underwent an explosive reaction. The reaction generated a large amount of heat accompanied by simultaneous strong light emission. The product was confirmed to be chalcopyrite-type CIS by X-ray powder diffraction analysis. From the results, we categorized that preparation of CIS by MCP is a form of ‘self-propagating high-temperature synthesis’ (SHS) or ‘gasless combustion synthesis’. In ordinary SHS, a reaction is initiated from a sample surface by a heat flux such as a heated wire, electric spark, or laser beam. On the other hand, in the present reaction system (Cu+In+2Se), was naturally ignited only by mechanical stimulation. Following initiation by an external stimulus, the reaction was self continuing via the exothermic heat generated. The reaction mechanism of the preparation of CIS by the MCP is discussed on the basis of present reaction observations and thermochemical data.     

Synthesis of In-doped Ga2O3 zigzag-shaped nanowires and optical properties

In-doped Ga₂O₃ zigzag-shaped nanowires and undoped Ga₂O₃ nanowires have been synthesized on Si substrate by thermal evaporation of mixed powders of Ga, In₂O₃ and graphite at 1000 °C without using any catalyst via a vapor-solid growth mechanism. The morphologies and microstructures of the products were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and photoluminescence spectroscopy (PL). The nanowires range from 100 nm to several hundreds of nanometers in diameter and several tens of micrometers in length. A broad emission band from 400 to 700 nm is obtained in the PL spectrum of these nanowires at room temperature. There are two blue-emission peaks centering at 450 and 500 nm, which originate from the oxygen vacancies, gallium vacancies and gallium-oxygen vacancy pairs.     

Synthesis and enhanced photocatalytic activity of NaNbO3 prepared by hydrothermal and polymerized complex methods

We prepared NaNbO₃ by several methods, namely solid-state reaction (SSR), hydrothermal (HT) and polymerized complex (PC) methods, and investigated the relationships between the photocatalytic activity and the particle size and morphology. The photocatalytic activity was evaluated by H₂ evolution from an aqueous methanol solution and pure water splitting in the presence of the Pt(0.5 wt%)/NaNbO₃ and RuO₂(1.25 wt%)/NaNbO₃, respectively. It is found that the sample prepared by PC with smallest particles exhibits the highest photocatalytic activity in both reactions. Moreover, the HT sample with the cubic and rectangular shape also shows the enhanced photocatalytic activity for H₂ evolution from an aqueous methanol solution in comparison with that of the sample prepared by SSR.     

Preparation and characterization of NiFe2O4/NiO composite film via a single-source precursor route

NiFe₂O₄/NiO nanocomposite thin films have been successfully prepared through a facile route using nickel iron layered double hydroxide (NiFe-LDH) as a single-source precursor. This synthetic approach mainly involves the formation of NiFe-LDH film by casting the slurry of NiFe-LDH precursor on the α-Al₂O₃ substrate, followed by high-temperature calcination. The composition, microstructure and properties of the films were characterized in detail by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and vibrating sample magnetometer (VSM). The results indicate that NiFe₂O₄/NiO composite film was composed of granules with diameter less than 100 nm, and the thickness of the film was in the range 1-2 μm. The magnetization of the film can be tuned by alternating the Ni/Fe molar ratio of LDH precursor. In addition, the method developed should be easily extended to fabricate other MFe₂O₄/MO composite film systems with specific applications just by an appropriate combination of divalent/trivalent composition in the precursor of LDHs.     

Photocatalytic abilities of gel-derived P-doped TiO2

P-doped TiO₂ nanoparticles were synthesized through hydrolysis and condensation of Ti(OC₂H₅)₄ with H₃PO₄ additions. Effects of [H₃PO₄]/[Ti(OC₂H₅)₄] molar ratios on the anatase-to-rutile phase transformation, crystallite sizes, surface areas, and photocatalytic abilities of the gel-derived P-doped TiO₂ were investigated. The P-doped TiO₂ nanoparticles prepared by [H₃PO₄]/[Ti(OC₂H₅)₄]=0.03 were composed of anatase monophase even at 900 ^oC and possessed very strong photocatalytic ability. Kinetic studies on the P-doped TiO₂ to photocatalytically decompose methylene blue under irradiation of 365 nm UV light found that the P-doped TiO₂ prepared by [H₃PO₄]/[Ti(OC₂H₅)₄]=0.03 and calcined at 800 ^oC had the specific reaction rates, at 25 °C, k_A,m=0.76 m³/(kg min) (based on the mass of P-doped TiO₂) and k_A,BET=46.2×10⁻⁶ m/min (based on the BET surface area of P-doped TiO₂), which is superior to the performance of a commercial product, P25 (k_A,m=0.22 m³/(kg min) and k_A,BET=4.8×10⁻⁶ m/min).     

Optical and photocatalytic properties of nanocrystalline TiO2 synthesised by solid-state chemical reaction

Nanoparticulate TiO₂ is of interest for a variety of technological applications, including optically transparent UV-filters and photocatalysts for the destruction of chemical waste. The successful use of nanoparticulate TiO₂ in such applications requires an understanding of how the synthesis conditions effect the optical and photocatalytic properties. In this study, we have investigated the effect of heat treatment temperature on the properties of nanoparticulate TiO₂ powders that were synthesised by solid-state chemical reaction of anhydrous TiOSO₄ with Na₂CO₃. It was found that the photocatalytic activity increased with the heat treatment temperature up to a maximum at 600 °C and thereafter declined. In contrast, the optical transparency decreased monotonically with the heat treatment temperature. These results indicate that solid-state chemical reaction can be used to prepare powders of nanoparticulate TiO₂ with properties that are optimised for use as either optically transparent UV-filters or photocatalysts.