Efficient white organic light-emitting diodes based on an orange iridium phosphorescent complex

Stable and efficient white light emission is obtained by mixing blue fluorescence and orange phosphorescence. The introduction of double exciton blocking layers brings about well confinement of both charge-carriers and excitons in the emission layer. By systematically adjusting blue fluorescent and orange phosphorescent emission layers thickness, carriers in emission zone are balanced, and electrically generated excitons can be efficiently utilized. One white device with power efficiency of 14.4 lm/W at 100 cd/m² has excellently stable spectra. The improvement of performance is attributed to efficient utilization of the excitons and more balance of charge-carriers in emission layer.     

Effects of different buffer layers on the electro-luminescence performances in white organic light-emitting diodes

The effects of different hole injection materials as the buffer layer on the electro-luminescence (EL) performances of white organic light-emitting diodes (WOLEDs) are investigated in detail. It is found that the EL performances and electric properties were strongly dependent on the structure of the used hole injection materials with different thicknesses, which directly affected the injection and transport properties in devices, and thus the EL efficiency and lifetime. It can be seen that a hybrid buffer layer of 5 nm aluminum fluoride (AlF₃)/15 nm 4,4′,4″-tris(3-methylphenylphenylamino) (m-MTDATA) as the hole injection buffer layer shows the best EL performances in efficiency and lifetime, showing a promising hole injection material in WOLEDs. The mechanisms behind the enhanced performance of the hybrid buffer layer in WOLEDs are discussed based on X-ray photoelectron spectroscopy (XPS) measurement.     

High performance polymer light-emitting diodes doped with a novel phosphorescent iridium complex

High performance polymer light-emitting diodes (PLEDs) based on a phosphor of noble metal complex bis(1,2-dipheny1-1H-benzoimidazole) iridium (acetylacetonate) [(pbi)₂Ir(acac)] doped in poly(N-vinylcarbazole) (PVK) host with various concentration were demonstrated. The photoluminescence (PL) and electroluminescence (EL) spectra of the PLEDs exhibited an emission intensity decrease of PVK and a gradually enhanced feature of (pbi)₂Ir(acac) with increased doping concentration. The device with a 5 wt% (pbi)₂Ir(acac) doped PVK system showed a high power efficiency of 3.84 lm/W and a luminance of 26,006 cd/m². The results indicated that both energy transfer and charge trapping have a significant influence on the performance of PLEDs. The devices have a broadened EL spectrum of full-width at half-maximum (FWHM) more than 100 nm, which can be realized for WOLEDs.     

Spectroscopic investigations of a novel push-pull azo compound embedded in rigid polymer

A new heterocyclic push-pull azo compound-in-poly(methymethacrylate) (PMMA) film has been made by means of the spin-coating method. The spectroscopic properties of the films have been investigated with the steady-state absorption spectra, and steady-state fluorescence and femtosecond time-resolved fluorescence spectra in the first time, which is an important characteristic for the application of the film. The excited singlet (S₁) state lifetimes for trans and cis isomers of the film at room temperature have been measured. The excited triplet (T₁) state lifetime of cis isomer of the film has been obtained. The electronic structure of the film has been explained. The results show that the aggregate state of the azo molecules greatly influences its absorption spectra.     

Synthesis and photoluminescence properties of NaPbB5O9:Dy phosphor materials for white light applications

Given the recent increased interest in phosphor materials and their applications, we analyzed a new NaPbB₅O₉:Dy³⁺ phosphor material with different concentrations of Dy³⁺. In particular, we investigated the crystal structure, morphology, and luminescence properties of these materials. X-ray diffraction analyses confirmed the formation of NaPbB₅O₉:Dy³⁺ phosphor powder. The functional groups present in the phosphor materials were examined by Fourier transform infrared spectroscopy. Scanning electron microscope images showed that the size of the grains was in the micrometer range. Photoluminescence spectra were recorded at different excitation wavelengths for the phosphor materials and we analyzed the variation in the intensity of the emission bands with different concentrations of Dy³⁺ ions. The color co-ordinates were calculated and used to characterize the color of the phosphor. We found that the emission colors of the Dy³⁺-doped NaPbB₅O₉ powders depended on the Dy³⁺ ion doping concentration and the excitation wavelength.     

Heat treatment effects on dielectric and physico-chemical properties of an epoxy polymer

Infrared (IR) spectroscopy, dielectric spectroscopy (DS), and thermally stimulated depolarization current (TSDC) have been used to study heat treatment effects on an epoxy-based polymer. Variations in physico-chemical and dielectric properties were examined for annealing temperatures between 55 and 170 °C. IR results have shown that heating causes both chain scission and thermal oxidation of the polymer, increasing thus the amount of trapped charges. The complex dielectric permittivity and the dielectric modulus have been analyzed, by means of DS, to highlight and separate charge relaxation phenomena from conduction contributions. Results indicate structural rearrangements, leading to a decrease of dipolar relaxation frequency (from 16 to 13.5 kHz) and an increase of the relaxation strength (around 20%). TSDC measurements have shown a current peak shift towards higher temperatures, and a significant intensity decrease, which is proportional to the quantity of released charges.     

Optical and electroluminescent properties of 3,4,6-triphenyl-α-pyrone

The optical and electroluminescent properties of 3,4,6-triphenyl-α-pyrone (α-pyrone), a new blue fluoresce dye, are investigated using films prepared by wet and dry process and organic light-emitting diodes (OLEDs) fabricated with an α-pyrone-emitting layer. The optical properties of α-pyrone are found to be affected by its crystallinity. In the fabrication of OLEDs, wet processing (spin coating) is shown to be more suitable for preparation of the α-pyrone layer than dry processing (thermal evaporation). The best device performance is obtained for a device prepared using poly (n-vinylcarbazole) as the dye host, and a bathocuproine/tris-(8-hydroxyquinoline)aluminum bilayer as a hole-blocking and carrier-injection layer. The maximum luminance of this device is 3000 cd/m² at a current density of 0.2 A/cm², with a current efficiency of 1.8 cd/A at 0.02 A/cm².     

Optical and photoluminescent properties of plasma polymer films used in electroluminescent display structures

The optical and photoluminescent properties of plasma polymer layers synthesized from hexamethyldisiloxane are examined. The value of the polymer layer transparence is in the limits from 55% at 400 nm to 88% at 800 nm. Photoluminescence is stimulated by using the spectral line λ=365 nm emitted by a Hg spectral lamp.The organosilicon plasma polymers are included as protective and capsulating layers in electroluminescent (EL) structures. The structure obtained is characterized by a significant increase in emission brightness, compared to inorganic protective layers. For EL structures with a chalcogenide protective layer the increase is more than 6 times and for structures with heterogeneous matrix on the base of TiO₂ it is more than 20 times. As a stable covering the organosilicon plasma polymer increases the lifetime of the EL structures too.     

Luminescence properties of poly(9,9-dioctylfluorene)/polyvinylcarbazole blends: Role of composition on the emission colour stability and electroluminescence efficiency

Light-emitting diodes (LEDs), based on blue-emitting polyfluorenes are usually prone to the appearance of a contaminant green emission (centered around 520 nm), leading to an apparent whitish light emission. We find that, for LEDs based on poly(9,9-dioctylfluorene), PFO, the blending with the hole transporting polyvinylcarbazole, PVK, can suppress such green emission. LEDs based on a PFO/PVK blend with a 1:2 weight ratio and with aluminum cathodes show a quite stable blue emission. This result reveals the important role played by the interchain interactions on the observed contaminant green emission. In addition, we observe that in Al-based devices blending causes a decrease in EL efficiency while in Mg-based devices we obtained higher efficiencies with the blend PFO:3PVK when compared with neat PFO-based devices.     

Magnetic and electronic properties of the antiferromagnetic YbFe4Al8 compound

The magnetic, electrical and electronic properties of the tetragonal ternary YbFe₄Al₈ compound have been investigated. This compound was supposed to be an antiferromagnetic superconductor due to the negative magnetization signal appearing at a low field of the field cooling mode, however, based on the measurements of the temperature dependence of magnetization and resistivity we do not confirm the presence of superconductivity in this material and we ascribe the negative magnetization to the complicated non-collinear magnetic structure. A switch to the antiferromagnetic order at about 150 K has been visible both on the M(T) and ρ(T) curves. The valence state of the Yb ions has been studied by X-ray photoemission spectroscopy. The valence band spectrum at the Fermi level exhibits the domination of the hybridized Yb(4f) and Fe(3d) states.     

Influence of morphology on the emissive properties of dye-doped PVP nanofibers produced by electrospinning

Dye-doped polymer micro- and nanofibers with tailored light emission properties have great potential for applications in optical, optoelectronic, or photonic devices. In this study, these types of structures were obtained by electrospinning rhodamine 6 G-doped polyvinylpyrrolidone (PVP) using a polymer solution of 10% (mass) concentration in ethanol. Polymer nanofibers with different morphologies (smooth and beaded) and diameters of about 500 nm were obtained using different electrospinning conditions with the same solutions. Fluorescence optical microscopy observations showed that the dye was distributed uniformly in the doped PVP nanofibers. Different shifts were observed when we compared the wavelength of the dye emission band peak of the smooth nanofibers (566 nm) and the wavelength of the dye emission band peak of the beaded fibers (561.5 nm) produced by electrospinning in different conditions with the wavelength of the emission band peak for transparent thin films produced by spin coating (558 nm) using the same polymer solution. This demonstrates that it is possible to tune the optical properties of electrospun dye-doped polymer nanofibers simply by modifying the morphology of the material, i.e., the parameters of the electrospinning process.     

Femtosecond mid-IR pump-probe spectroscopy of photoinduced insulator to metal transition in dimer Mott insulator κ-(BEDT-TTF)2X

Ultrafast dynamics of the photoinduced insulator (I) to metal (M) transition were investigated using femtosecond mid-infrared pump-probe spectroscopy in two-dimensional organic Mott insulators [bis (ethylenedithio)]-tetrathiafulvalene (BEDT-TTF) salts κ-(BEDT-TTF)₂X (κ-(ET)₂X, where X denotes anion). In κ-(d-ET)₂Cu[N(CN)₂]Br, a metallic state was photogenerated using a phonon-mediated mechanism: the effective bandwidth increases through the photoinduced molecular rearrangement. The mechanism differs fundamentally from the previously reported photoinduced filling control in one-dimensional Mott insulators.     

Charge conduction process and photoelectrical properties of bulk heterojunction device based on sulphonated nickel phthalocyanine and rose Bengal

The dependence of photovoltaic performance of the bulk heterojunction photovoltaic device based on the blend of sulphonated nickel phthalocyanine (NiPcS) and rose Bengal (RB) on their composition, thermal annealing and oxygen exposure has been investigated. It is found that both electron and hole mobility in RB phase and NiPcS phase, respectively has been increased on thermal annealing. The power conversion efficiency of the device increases upon thermal annealing, attributed the balance charge transport. The power conversion efficiency of the device experiences a drastic increase upon oxygen exposure, which attributed to the photo-induced doping, increase in exciton diffusion length in NiPcS phase and increased volume of exciton dissociation interfacial sites. From the impedance spectroscopy, we conclude that the change in bulk resistance and dielectric constant of the active material due to the illumination has a direct relevance to the photocurrent generated by the device.     

Evaluation of stoichiometric rare-earth molybdate and tungstate compounds as laser materials

Photoluminescence spectra, photoluminescence decay curves and Raman scattering spectra have been investigated for stoichiometric rare-earth molybdate and tungstate compounds. NaNd(MoO₄)₂ and NaNd(WO₄)₂ show emissions due to the transition ⁴F_3/2→⁴I_9/2 in Nd³⁺. A possibility of laser oscillation in NaNd(MoO₄)₂ is pointed from comparisons of the emission intensity and the decay time constant with NaNd(WO₄)₂ where laser oscillations have been reported. In NaLa(MoO₄)₂ and NaLa(WO₄)₂, observed emissions which are not related to La³⁺ are probably due to the transitions in MoO₄^2- and WO₄^2- molecular ions, respectively, in scheelite crystal. Raman spectra of these compounds are similar, probably related to the same crystal structure. LiEr(MoO₄)₂ shows the emissions due to transitions ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 in Er³⁺, respectively, which are believed to be observed for the first time.     

Fluorescent photoswitchable nanohybrids based on photochromism

A new type of fluorescent photoswitchable nanohybrids based on photochromism has been assembled, in which hydrophobic diarylethene and matched fluorescent dye are assembled in the nanoscale crosslinked polymeric matrix via a modified miniemulsion polymerization process and a seeded polymerization technique. The nanohybrids exhibited excellent fluorescent photoswitchable action owing to efficient photoinduced energy transfer whether the nanohybrids as nanoparticles dispersed in water or in a polymer film, and the improved photo-thermal stability of both essential components could be readily achieved. Importantly, our assembling approach is much simpler than the covalent chemical synthesis, and is a general method for other hydrophobic photochromic compounds.     

Preparation,characterization and photocatalytic performance of noble metals (Ag,Pd, Pt,Rh) deposited on sponge-like ZnO microcuboids

Novel sponge-like ZnO microcuboids with a hierarchical structure were fabricated via an alcoholic thermal process. Then a series of noble metals (Ag, Pd, Pt, Rh) was loaded onto the microcuboids. The samples obtained were characterized by nitrogen physical adsorption, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), and X-ray photoelectron spectroscopy (XPS). The results show that the ZnO microcuboids have a high surface area and a sponge-like hierarchical structure. Activity tests for the degradation of acid orange II dye showed that the noble metals enhanced the activity of ZnO to different extents. For loading of 0.5 wt.%, the activity enhancement decreased in the order Pd>Ag>Pt>Rh. Co-loading of Pd and Ag had a detrimental effect on activity compared to single loading. The enhanced photocatalytic performance can be attributed to an increase in the rate of separation of photogenerated e^–/h⁺ pairs induced by the noble metals.     

Synthesis and fluorescence properties of pure and metal-doped spherical ZnS particles from EDTA-metal complexes

Monodispersed spherical ZnS particles as well as doped with Cu, Mn ions were synthesized from metal-chelate solutions of ethylenediamine tetraacetate (EDTA) and thioacetamide (TAA). The characterizations of the ZnS-based particles were investigated via TEM, SEM, XRD, TG/DTA and PL measurements. The sphere size was controlled from 50 nm to 1 μm by adjusting the nucleation temperatures and molar ratio of Zn-EDTA to TAA. The emission intensity continuously increased with the increase of the particle size. When the ZnS microspheres were annealed at 550-800 °C, there were two specific emission bands with the centers at 454 nm and 510 nm, which were associated with the trapped luminescence arising from the surface states and the stoichiometric vacancies, respectively. When Cu²⁺ was introduced into ZnS microspheres, the dominant emission was red-shifted from 454 to 508 nm, fluorescence intensity also sharply increased. However, for the Mn²⁺-doped ZnS, the emission intensity was significantly enhanced without the shift of emission site.     

Compositional-dependent lead borate based glasses doped with Eu ions: Synthesis and spectroscopic properties

New multicomponent lead borate based glasses with various PbO/B₂O₃ weight ratio were prepared. The glass samples were analyzed in detail by using Raman and IR absorption spectroscopy. Optical properties of Eu³⁺ ions have been investigated in lead borate based systems, in which PbO/B₂O₃ weight ratios were changed from 1:2 to 8:1 in glass composition. The values of the phonon energy of the host and ⁵D₀ lifetime of Eu³⁺ decrease, whereas absorption and emission intensities, as well as bonding parameter increase with increasing PbO concentration. Additionally, spectral lines are shifted in direction to the lower frequency region. Non-monotonic dependence of the fluorescence intensity ratio R (⁵D₀-⁷F₂/⁵D₀-⁷F₁) upon PbO/B₂O₃ content has been observed in contrast to bonding parameter that is also non-linear but monotonic. Some structural and spectroscopic aspects for Eu-doped lead borate based glasses are presented.     

Density functional theory study on two-peak emission of Eu activators in Sr2SiO4

The supercells of pure and Eu-doped Sr₂SiO₄ were theoretically analyzed by density functional theory (DFT) calculations to investigate the typical two-peak emission of Sr₂SiO₄:Eu²⁺, which originates from two different Sr²⁺ (or Eu²⁺) sites in the Sr₂SiO₄ host structure. The Perdew-Wang generalized-gradient approximation (GGA) functional and the double numerical plus d-functions (DND) basis set with effective core potentials (ECP) were employed in the calculations of electronic properties. The electron transfer between Eu²⁺ ions placed at two different crystallographic Sr²⁺ sites was understood based on the accurate assignment of deconvoluted peaks of the two-peak emission to their corresponding crystallographic sites. This study ought to be instructive as a basic guideline to improve the color chromaticity of Sr₂SiO₄:Eu²⁺ for use in white light emitting diodes (WLEDs).     

The effect of conjugation length distribution on the properties of modified PPV

The aim of this work was to demonstrate the optical properties of a copolymer involving alternating poly(para-phenylene–vinylene) and ether groups derived from the conjugation length distribution. For this, the time-dependent density functional theory (TD-DFT) was used. Thus, different conjugation lengths were considered, where the correlation of the corresponding theoretical spectra, including Raman, optical absorption and photoluminescence, allows us to conclude that the conjugation length distribution is caused by a random distribution of the ether blocks. The weight of each conjugation length representing its contribution is shown by the use of the Raman spectra. Furthermore, the theoretical spectra arising from the response of different conjugation lengths are obtained and compared with the experimental ones.